DYUTHI SPECIAL PACKAGE No. 02 - RECONDUCTORING AND CONVERSION OF LT BARE OH LINE USING LT ABC 70 sq.mm ON TURN KEY BASIS UNDER ELECTRICAL CIRCLE, TIRUR

MATERIAL ITEMS

Insulation Piercing Connector - Main: 16 sq mm to 95 sq mm; Tap : 16 sq mm to 95 sq mm

Insulation Piercing Connector - Main: 16 sq mm to 95 sq mm; Tap : 1.5 sq mm to 16 sq mm

Stainless Steel Buckle Slot width 20.5 mm x 1.5 mm,Thickness 1.2 mm.

Anchoring / Dead end Clamp Assembly for LT AB Cables up to 70 sq.mm (Insulated Messanger up to 50 sq mm)

Stainless Steel Strap [20 mm x 0.7 mm]

Suspension Clamp Assembly for LT AB Cables up to 70 sq.mm

End Cap for LT ABC 50 Sq mm

End Cap for LT ABC 16 Sq mm

End Cap for LT ABC 70 Sq mm

Cable Tie UV Plastic Heavy Duty 250 mm Length

Insulation Piercing Satellite connector – Main : 16 sq mm to 95 sq mm; Tap : 4 sq mm to 50 sq mm (4 way)

Pole PSC 8 M

Stay Wire 7/8 (7/3.15mm) GI (HT Stay Wire)

Stay Insulator Porcelain 415/240 V

Clamp GI for LT Stay for Angular location

Anchor Plate 200 x 200 x 6 mm GI (LT Stay Plate GI))

Stay Rod (Anchor Rod) GI 16 mm dia (LT Stay Rod)

Thimble GI 75 mm x 22 mm x 40 mm ,1.5 mm Thickness (For HT and LT)

Helically formed Guy-Grip HT

Turn Buckle ,Eye bolt with 2 Nuts 16 mm dia -GI (Stay tightner LT )

Earthing Coil GI 115 Turns 50 mm internal Dia dia

Ferrules 5 Sq.mm(GI)

GI Wire 8 SWG

Aerial Bunched Cable LT 3x70 + 1x16 + 1x50 sq.mm (Insulated Messenger)

FUSE UNIT 415 V 100 A PORCELAIN

Cable 1.1kV XLPE AL 1c X70 sq mm (Un Armoured)

Turn Buckle ,Eye bolt with 2 Nuts 20 mm dia -GI(Stay tightner HT)

Base Frame SMC for LT Section Fuse with neutral Link

Pre- Insulated Crimping Socket Palm Type 70 Sq.mm -Bimetallic (For ABC)

Pre- Insulated Crimping Socket Palm Type 50 Sq.mm -Bimetallic (For ABC)

Pre- Insulated Crimping Socket Palm Type 16 Sq.mm -Bimetallic (For ABC)

Pipe GI 40 mm dia -2.5 m Length( Earth Pipe)

Earth Chamber (PVC) With RCC Covering Slab

Earth Connector 150sq.mm

Crimping Socket Palm Type 120 Sq.mm -Al (Cable Lug)

Crimping Socket Palm Type 70 Sq.mm -Al (Cable Lug)

Bolt&Nut GI with washers of various sizes

CROSS ARM GI CHANNEL 2 LINE (2 Line Channel Cross Arm) with Clamp, Bolt & Nut for PSC Pole 8M/200kg

Crimping Socket Palm Type 95 Sq.mm -Al (Cable Lug)

Anchor Plate 200 x 200 x 8 mm GI (HT Stay Plate GI))

Pole PSC 9 M

V cross arm -GI -11 kV

Clamp GI for V cross arm

Pin Insulator 11kV Composite Polymeric

Pole Top Bracket -F Type GI -11 kV

Insulation Piercing Satellite Connector ( IPMC) -Main 16 to 70 Sq.mm; Tap 2.5 to 50 Sq.mm ( 4 way )

Pole Top Distribution Box LT Outdoor 415 V 25 kW (For Connection from ABC)

SHACKLE INSULATOR 415V SET(WITH STRAP BOLT&NUT)

Cable 1.1kV PVC Insulated AL Twin Core 2.5 Sq.mm PVC Sheathed Weather Proof (TC Weather Proof Wire 1/1.8)

Cable 1.1kV PVC Insulated AL Twin Core 6 Sq.mm PVC Sheathed Weather Proof (TC Weather Proof Wire 1/2.8)

Clamp GI for LT 2/4 Line Cross arm

CROSS ARM GI CHANNEL 4 LINE (4 Line Channel Cross Arm) with Clamp, Bolt & Nut for PSC Pole 8M/200kg

Composite polymeric pin insulator with pin 1.1 kV

Stay Rod (Anchor Rod) GI 20 mm dia (HT Stay Rod)

Stay Insulator Porcelain 11k V

CLAMP GI FOR HT STAY WITH BOLT and NUT SET

Channel cross arm GI 75x40 mm- 1.8 M

Cable 1.1kV PVC AL 1c x 25 sq mm (Un Armoured)

Pole A Type GI 11 M

Cleat GI for 11kV Disc insulator

Disc Insulator 11 kV Composite Polymeric

Hardware Fittings 11kV T&C Type

Pole A Type GI 12 M

Clamp for 1.8m/2.4 Channel cross arm (MSC 75X 40)

CLAMP GI FOR HT CROSS ARM

Service connection box LT

Pole Mounted (Pole Top) Service Connection Distribution Box

Item Wise BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

LABOUR ITEMS

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading.

Installation of Insulation piercing connector for main to service line main :16-95 sqmm, Tap 16-95 sqmm

Installing One No. Insulation piercing connector of size Main :16 to 95 ,Tap:1.5 to 16 Sq.mm

Erection of Anchor clamp / dead end clamp for LT ABC of any size

Erection of suspension clamp for LT ABC of any size

Providing End Caps

Providing Cable Tie

Installing One No. 4 way Satellite Connector of size Main :16 to 95, Tap:4 to 35 Sq.mm to the LT AB cable of Standard size

Dismantling (without damage) one km LT Sph 2 wire OH line, cross arms, insulators and stacking the conductors in rolls.

Erecting one LT PSC Pole in position incl. digging & back filling pit.

Loading LT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Additional rate for excavation of one Pit for LT Pole/LT Stay in Laterite.

Additional rate for excavation of one Pit for LT Pole/LT Stay in Hard Laterite.

Providing Strut using LT PSC pole incl. digging & back filling pit.

Providing Fly stay for LT pole using LT PSC pole incl. digging & back filling pit.

Renewal of existing damaged/old LT PSC/RCC (Sph line) pole with new PSC pole in place and refitting of all items incl. conveyance (except pole).

Renewal of existing damaged/old LT PSC/RCC (3ph line) pole with new PSC pole in place and refitting of all items incl. conveyance (except pole).

Providing Stay for LT poles incl. digging & back filling pit.

Renewal of existing damaged/broken old LT stay with existing stay rod.

Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/structure & backfilling.

Additional rate for excavation of one Pit for Coil Earthing in Laterite

Stringing of 1.1 kV Aerial bunched cable of size 3 x 70 + 1 x 16+1x 50 sqmm with bare/insulated Messenger through existing poles

Transporting LT ABC by hired vehicle to a distance up to 5 km and carring up to 2 drum including loading and un loading using crane

Fitting one No. Section fuse on LT line with dropping cables, crimping sockets, connecting with bolt&nut etc.

Dismantling (without damage) one km LT 3ph 4 wire OH line, cross arms, insulators and stacking the conductors in rolls.

Dismantling (without damage) one km LT additional conductor line, cross arms, insulators and stacking the conductors in rolls.

Additional rate for excavation of one Pit for Coil Earthing in Hard Laterite.

Installation of Pre-insulated lugs for 50sqmm

Installation of Pre-insulated lugs for 16sqmm

Installation of Pre-insulated lugs for 70sqmm

Providing one Earth using earth pipe incl. digging separate pit at standard distance away from the pole/structure & backfilling.

Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion.

Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion.

Additional rate for excavation of one Earth Pit (2.5m depth) in Laterite.

Installation of Pre-insulated straight through joints for 16sqmm cable

Installation of Pre-insulated straight through joints for 70sqmm cable

Pole numbering using printed Aluminium sheets / Painting the surface of pole with anti algal yellow paint and painting Letters with black paint as specified incl. cost of paint.

Additional rate for excavation of one Pit for LT Pole/LT Stay in Soft Rock.

Additional rate for excavation of one Earth Pit (2.5m depth) in Soft Rock.

Additional rate for excavation of one Pit for Coil Earthing in Soft Rock.

Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Insertion of one HT PSC pole in existing line incl. digging & backfilling pit, fitting cross arm, insulators, binding etc.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Soft Rock.

Fitting one LT 2 line cross arm on HT or LT existing poles incl. fitting insulators and binding the same with LT Line.

Additional rate for refitting/redoing one Shackle set and reshackling one span while renewing any type of pole.

Fitting of one No. pole top service connection box of standard size (up to 4 way) using ss strap/B&N of suitable size in to the PSC/A poles at the standard height excluding giving connections

Insertion of one LT PSC pole in existing 3ph OH line incl. digging & back filling pit, fitting cross arm, insulator, binding etc.

Installation of Pre-insulated straight through joints for 50sqmm cable

Additional rate for excavation of one Pit for HT Pole/HT Stay in Hard Laterite.

Providing WP support with PSC pole incl. digging & back filling pit.

Installing one pole top service connection box 3ph 6way and giving connections.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Laterite.

Renewal of existing damaged/old LT stay with new stay in place and refitting of all items and conveyance of all materials.

Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit.

Fitting and providing one Strut using HT PSC pole incl. digging & back filling pit.

Renewal of existing damaged/old LT TW/RSJ/Rail (Sph line) pole with new PSC pole in place and refitting of all items incl. conveyance (except pole).

Insertion of one LT PSC pole in existing Sph OH line incl. digging & back filling pit, fitting cross arm, insulator, binding etc.

Fitting and erecting one HT PSC Pole in position including digging & back filling pit (excluding the rate for fitting of V cross arm, F Clamp)

Installing one pole top service connection box Sph 6way and giving connections.

Fitting and erecting one A pole in position including digging & back filling pit ( Excluding the rate for fitting of V cross arm , F clamp)

Additional rate for excavation of Pit for A type pole in Hard Laterite.

Fitting one Additional V cross arm in existing single pole incl. conveyance of materials.

Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of materials.

Fitting one additional F top bracket

Fitting one LT 4 line cross arm on HT or LT existing poles incl. fitting insulators and binding the same with LT Line.

Renewal of existing damaged/old 11kV Stay with new stay in place incl. excavation & backfilling of pit and conveyance.

Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification).

Additional rate for excavation of one Pit for LT Pole/LT Stay in Rock.

Fitting and erecting one HT PSC Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Transporting poles by hired vehicle to a distance beyond 5km and carrying upto 4 poles. (Running km).

Providing additional HT stay insulator in existing stay.

Additional rate for excavation of one Earth Pit (2.5m depth) in Hard Laterite.

Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle).

Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Fitting and providing one HT Fly stay for 11kV pole using HT PSC pole incl. digging & back filling pits.

Additional rate for excavation of Pit for A type pole in Laterite.

Fitting one additional Fuse unit and giving connection from Transformer to fuse and DB to LT OH line.

Dismantling one ordinary street light/CFL/LED fitting from pole, repairing and refitting the same in position and giving connection.

Drilling hole of various sizes on existing Channel/Cross Arm.

Drilling oval shaped hole of various sizes on existing Channel/Cross Arm/GI/MS cleat etc.

Cutting Channel/Cross Arm/Angle Iron into two pieces.

Dismantling (without damage) one 11kV PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Renewal of existing damaged/broken old 11kV Stay to the existing stay rod.

Insertion of one HT A type pole in existing line incl. digging & backfilling pit, fitting cross arm, insulators, binding etc.

Renewal of existing damaged/old 11kV PSC/RCC Pole with new PSC pole in place and refitting of all items incl. conveyance (except pole).

Renewal of existing damaged/old LT TW/RSJ/Rail (3ph line) pole with new PSC pole in place and refitting of all items incl. conveyance (except pole).

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

TOTAL BOQ1 (Materials( Total Ex-work price of Materials + Total Transportation cost ) excluding GST.)

TOTAL BOQ2 (Installation / Erection Charges (Excluding GST)

TOTAL AMOUNT [1+2] (Excluding GST)

Discount offerred by Bidder(If any)

BOQ 3: TOTAL excluding GST [3 - 4]

Grand Total including GST (5+ GST Amount of BOQ1+GST Amount of BOQ2 )

Please Enable Macros to View BoQ information