Construction of 132 KV S.C. Pilibhit-Pilibhit TSS 2 Phase Transmission O/H Line on D.C. Towers on Turnkey basis alongwith materials and other associated works under E.T.D.-II, Bareilly

Amount

Construction of 132 KV S.C. Pilibhit-Pilibhit TSS 2 Phase Transmission Line on D.C. Towers on Turnkey basis alongwith Materials and Associated Works with all Cost of Men, Materials, Misc. Consumables, T&Ps, Transportation of Materials required for Satisfactory Completion of the Work as per Technical Specifications and Direction of the Supervising Engineer, as per Details below :

Supply (A)

Fabrication, Galvanizing, Inspection and Supply of 132 KV DC Tower including Stub, Extension and Stub Setting Templates, Gantry Structure as per drawings & BOM

Hot dip galvanized, Hexagon round hexagon head Transmission Tower Bolts Nuts and Waher for above Structures.

Compression type Double Tension Fitting Assembly, suitable for ACSR Panther Conductor consisting of Compression Dead End Clamp with Jumper Terminal (Cone), Anchor Shackle (2 No.), Yoke Plate (2 No.), Chain Link, Socket Clevis, Clevis Eye, Line side Arching Horn, Tower side Arcing Horn, complete with Bolts-Nuts -Spring Washers, Split Pin etc. as per Technical Specification & Sample.

Compression type Single Tension Fitting Assembly, suitable for ACSR Panther Conductor consisting of Compression Dead End Clamp with Jumper Terminal (Cone), Anchor Shackle, Bell Clevis (HH type), Socket Clevis (HH type), Line side Arching Horn, Tower side Arcing Horn, complete with Bolts-Nuts -Spring Washers, Split Pin etc. as per Technical Specification & Sample.

Supply of Single Suspension Fitting Assembly Free Centre Type suitable for ACSR Panther Conductor consisting of Suspension Clamp, J-Hook, Ball Hook, Line Side Arcing Horn complete with Split Pin, G.I. Bolts, Nuts, Plain & Spring Washers etc. as per Technical Specifications & Sample.

Mid Span Compression Joint, suitable for ACSR Panther Conductor consisting of extruded Aluminium Outer Sleeve (OD 38±1 mm, ID 23±0.2 mm, L 610±5 mm) and Mild Steel Inner Sleeve (OD 18±0.5 mm, ID 9.5±0.2 mm, L 203±5 mm) as per Technical Specifications & Sample.

Repair Sleeve, suitable for ACSR Panther Conductor duly made of extruded Aluminium Sleeve (OD 38±1 mm, ID 23±0.2 mm, L 241±5 mm) as per Technical Specifications & Sample

Performed Armour Rod Set, suitable for ACSR Panther Conductor consisting of 11No. Al. Alloy Rods each of Dia. 635(+)0/(-)0.1 mm & Length 1950±22 mm as per Technical Specifications & Sample.

Stock Bridge Vibration Damper (4R type), suitable for ACSR Panther Conductor as per Technical Specifications & Sample.

Compression type Tension Fitting Assembly, suitable for 7/10 SWG Earth Wire, consisting of Dead End Tube, Jumper Tube, Anchor D-Shackle, complete with Bolts-Nuts-Spring Washers, Cotter Pin etc. as per Technical Specifications & Sample.

Suspension Fitting Assembly, suitable for 7/10 SWG Earth Wire consisting of Suspension Clamp, Anchor Shackle, Keeper Piece, U-Bolt, complete with Bolts - Nuts- Spring Wahers, Split Pin etc. As per Technical Specifications & Sample.

Mid Span Compression Joint, suitable for 7/10 SWG Earth Wire duly made of Mild Steel Tube (OD18±0.2 mm, ID 10.3±0.2 mm) as per Technical Specifications & Sample.

Stock Bridge Vibration Damper (4R type), suitable for 7/10 SWG Earth Wire as per Technical Specifications & Sample.

Flexible Copper Bond of size 12 mm x 570 mm duly made of Electrolytic Copper and Crimped with Copper Lugs at both ends as per Technical Specifications & Sample

Bird Guard of Saw Tooth type duly made of 18 SWG M.S. Sheet and Hot Dip Galvanized complete with G.I. Bolts - Nuts - Spring Washers etc., suitable for fixing on Cross Arm of 'A' type 132 KV Towers of KPTL Design as per Technical Specifications & Sample.

Number Plate in size of 165 mm x 150 mm duly made of 16 SWG M.S. Sheet with Letters and Numerals in Enameled Red Colour on White Colour Enameled Background, Indicating Name of Transmission Line in Short Form (in English Letter of size 35 mm Height) and Tower No. (in English Letter of size 65 mm Height) as per Requirement alongwith 2 No. 16 mm x 40 mm size G.I. Bolts-Nuts-Spring Washers with of 2 No. Holes in Number Plate for Fixing as per Technical Specifications & Sample.

Phase Plate in Sets of both sides Enamelled Red, Yellow & Blue Colour Circular Discs of dia. 100 mm duly made of 16 SWG M.S. Sheet alongwith 1 No. 16 mm x 40 mm size G.I. Bolt-Nut-Spring Washer with 1 No. Hole in Phase Plate for Fixing as per Technical Specifications & Sample.

Danger Plate in size of 380 mm x 250 mm duly made of 16 SWG M.S. Sheet and Written 'DANGER' in English Letter of size 35 mm Height, '[krjk' in Hindi Letter of size 45 mm height, '132000 Volt' in English Letter of size 30 mm Height, Indicating 'Sign of Danger' in size of 70 mm x 80 mm all shown Symmetrically in Enamelled Red Colour on White Colour Enamelled Background alongwith 2 No. 16 mm x 40 mm size G.I. Bolts-Nuts-Spring Washers with 2 No. Holes in Danger Plate for Fixing 43as per Technical Specifications & Sample.

Pipe type Earthing Equipment Set, consisting of 32 mm dia. 3050 mm Long Heavy Duty Perforated 'C' Class G.I. Pipe, 50 mm x 6 mm size & 4750 mm Long Galvanized Steel Flat, 2 No. 12 mm x 40 mm size G.I. Bolts - Nuts - Spring Washers etc. as per Technical Specifications & Sample.

70 KN Porcelain Insulator.

120KN Porcelain Insulator.

Work (B)

Survey including Making of Location Route, Preparation of Profile, Tower Schedule, Schedule of Materials for Transmission Line on KPTL Design 132KV D.C. Towers.

Check Survey & Peg Marking of Tower Locations. (1 Job per Loc.)

Excavation of Foundation Pits for KPTL Design 132KV D.C. Towers including all Earth Work, Back Filling, Levelling etc.

Setting of Stubs of KPTL Design 132KV D.C. Towers including all Foundation Work but excluding the Cost of Concerting & Excavation as per Details below :

'A+0' type Tower

'A+5' type Tower

'B+0' type Tower

'B+5' type Tower

'C+0' type Tower

'C+5' type Tower

'C+10' type Tower

'C+15' type Tower

'C+25' type Tower

Concreting of Foundations using M20 Grade Cement - Concrete - Coarse Sand Mixture in the Ratio of 1:2:4 with 20 mm Stone Metal for Towers & Gantries including Cost of Materials, De-Watering, Shoring, Shuttering, Framing, Curing etc.

Installation of Steel Reinforcement Bars in R.C.C. Foundation for Towers including Cost of Steel Reinforcement Bars with due Cutting, Bending, Placing, Binding etc.

Transportation of new, ACSR Panther Conductors, 7/10 SWG Earth Wire etc from designated Sub Stations in Bareilly/Pilibhit or any place/other District (Approx. upto 100 Km Distance) to Line Site, Line Site to Line Site as per Direction of the Supervising Engineer including Loading, Unloading & Stacking etc. (Approx. 400MT.)

Erection of Super Structures of 132KV Towers, their Extensions wherever Required including all Work above Ground Level with Proper Fixing & Tightening of all Tower Parts including Fitting of Danger Plate, Phase Plate, Number Plate, Bird Guard etc. but Excluding the Hoisting of Insulators, Fixing of Hardware Fittings, Conductor / Earth Wire Fittings / Accessories etc.

Tack Welding of all the Bolts - Nuts upto 2nd Section of the Towers from Ground Level with 3 Tacks of 10 mm thickness & Finally, Applying of Zinc Rich Aluminium Paint on the Affected Surfaces.

Laying, Stringing, Tensioning, Clamping of 7/10 SWG Earth Wire including Fixing of Tension Fittings, Vibration Dampers etc. between Section Towers, Section Tower to Gantry at Sub Station end. (1 Job per section)

Laying, Stringing, Tensioning, Clamping of 2 Ø ACSR Panther Conductor including Hoisting of Tension Insulator Strings, Single Tension Fittings, Vibration Dampers etc. between Section Towers, Section Tower to Gantry at Sub Station end. (1 Job per section)

Earthing Work including Earth Work etc. for Pipe type Earthing of new Section Towers including Cost of Coke, Salt etc., but Excluding Cost of Pipe type Earthing Equipment Set. (1 Job per Tower)

Cutting of Following sizes various types of Trees like Mango, Neem, Sheesham, Peepal, Semal, Eucalyptus, Popular etc. Falling in the Range of Corridor of the said 132KV Line to Provide the Minimum Clearance of about 8 Meter between the Trees & Conductors on both side of the Towers / Line, with all due Care of Safety & Precautions to Avoid any Damage to Nearby Buildings, Power & Telephone Lines Passing Nearby, Crops, other Nearby Trees etc. The Work also includes Removing, Eliminating & Cleaning the Line Sites after Cutting of the Trees :

Trees having Girth between 0.5 - 1.0 Meter

Trees having Girth between 1.0 - 2.0 Meter

Lopping & Chopping of Branches of different types of Trees like Mango, Neem, Sheesham, Peepal, Semal, Eucalyptus, Popular etc. Falling in the Range of Corridor of the said 132KV Line to Provide the Minimum Clearance of about 8 Meter between the Trees & Conductors on both side of the Towers / Line, with all due Care of Safety & Precautions to Avoid any Damage to Nearby Buildings, Power & Telephone Lines Passing Nearby, Crops, other Nearby Trees etc. The Work also includes Removing, Eliminating & Cleaning the Line Sites after Lopping & Chopping of the Trees.

Jyoti Engineering Works

Jagad Electrical & Fabricators

KUMAR TRADING COMPANY