Repair / replacement of winch gear assembly and other allied jobs to departmental Recovery Vehicles (4x4) LA01-2494 and LA01-1868 of Mechanical Division Kargil.

Amount

Providing and fitting of heavy duty winch gear assembly (lifting / pulling gear assembly) including rear assembly set with shaft by way of dismantling and removal of the existing winch gear assembly and installation / setting / fixing of a new properly aligned winch gear assembly compatible to the said recovery vehicles with proper alignment with the vehicles driving shaft and pulleys by way of providing and fitting of: • Winch gear assembly with levers = ( complete set) • Rear assembly set with shaft = (complete set) • Rear aux-A leaf springs = (4 Nos) • Leaf spring clips with clamps/nuts and bolts = (6 inches, 4 Nos) • Leaf spring clips with clamps/nuts and bolts = (4 inches, 4 Nos) • Revits = (3 sets, 8 Nos), • Goli / Balls = (8 Nos), • Center bolts = (18 inches, 2 pieces), • Clip bolts = (8 Nos) • Droflin Kit = (8 sets), • Fuel tank cap = (1 No for one vehicle only), • Gear oil = (17 liters) • Lights = (2 Nos), • Grease = (5 kg), • Dothi Cloth = (05 Nos), • Siren = (1 No for one vehicle only) The job includes providing, cutting and fixing with reinforced welding of heavy duty reinforced towing frame section at the rear of the recovery vehicle below the existing towing frames at two places made of heavy duty M.S plate of 10-12mm thickness or more suitable to withstand the expected load to be towed/lifted/pulled. The frame shall be attached in alignment with the main chassis of the vehicle, adding cross members and bracing to increase the rigidity by making a box type structure to distribute stress which prevents twisting and bending etc required for lifting of light vehicles. The job also includes providing and fitting of high quality seat cover = complete set including necessary body repairs and painting wherever necessary as directed by the engineer incharge. Further the job includes a full load testing after necessary repair / replacement of equipments to ensure optimal performance and safety of the vehicle. Since the vehicles have to be repaired at any reputed workshop in Srinagar. The department will cover the fuel charges for the one-way trip from Kargil to Srinagar. However, the contractor will be responsible for the fuel charges for the testing and return trip from Srinagar to MED Kargil after completion of the necessary repairs / replacement. Complete job including labour charges etc but excluding GSTs

Note:- The firms shall provide all the required parts / subassemblies and components which may be found necessary for the efficiency, stability and completion of the work and satisfactory performance of the equipments, even if those have not been stated or mentioned here within to make the job a complete component to provide correct services as are intended for.

M/S DASS PA ENTERPRISES (BID ID -139838)