45/MID/AN

Repair/Strengthening of 15mrts head, 2 cusec. discharge single stage 150mm/125mm dia. Mather & Platt make Pumping unit No. 01 of LIS Quasbabala by way of dismantling the 2 cusec HC pump and 30 HP motor from the base frame, carriage/shifting of the machinery to the workshop by means of mech. transport and head load through zig-zag path . Job includes replacement of gland packing, Check nut neck ring, locking cotter gland bracket bearing, rebuilding/reconditioning of impeller and impeller shaft by re- metalling with high class rod at all worn out portions and then machining, turning, finishing to true size along with repairs/ reconditioning of key ways of impeller and impeller shaft, also necessary repairs to bearing housing and gland, P/F of gland packing and sheet joints, new nuts & bolts in the place of old/damaged ones. The job also includes re-assembling of the pump after repairs. Complete rewinding of 30 H.P Kirloskar make induction motor by way of dismantling the motor in workshop by separating side covers, extraction of rotor from stator, cutting of damaged coils of stator and extraction of coils from slots, complete cleaning of slots and fixation/insertion of new coils along with insulation material in slots, P/F of new sleeves on the side covers with turning/ making to bearing size and P/F of new bearings, impregnation of the motor and then re- assembling/re-installation , making proper alignment with the pump , making electrical connections and then testing & commissioning on no load/full load . Job includes cost of material, skilled & unskilled labour charges, carriage/shifting of motor/ transportation charges by mech. transport / head load before and after repairs, loading and un-loading and then re-installation at the foundation with deployment of tools and tackles including testing and commissioning at site. Complete Job...

Repairs to 125mm dia. reflux valves installed at delivery lines of pumps of L.I.S Quasbabala by way of dismantling , repair of hinges, re-adjustment of flap body of reflux valves by way of replacement / rebuilding the worn out parts such as spindles, bushes, brackets etc. for proper alignment & functioning. Complete job includes re-installation of reflux valves on the delivery line with P/F of new nuts, bolts in place of worn out/damaged along with packing stuff. It includes all type of carriages, handling and deployment of tools and tackles including labour charges for skilled and semi-skilled workers. Complete Job.

Repairing /re-conditioning of 125 mm dia sluice valve installed at delivery lines of pumping units of LIS Quasbabala by way of dismantling and separating its all components such as spindle rod , spindle nut , gate flap , C.I gland etc. Cleaning the parts deposited with silt and mud etc. and re- assembling of the sluice valve with P/F of packing sheet at the joints and gland packing including re-installation of sluice valves on the delivery line with P/F of new nuts, bolts& washers in place of worn out/ damaged along with jointing and packing stuff after levelling, making proper alignment/ adjustment with the installed delivery line. Complete Job.

Providing & Fitting of150mm dia. new.MS Suction Pipe in two segements of length 2.5 mtr. each as per site requirement with flanges to be fitted on both ends of the pipes, 01No 150mm dia. MS pipe bend with flanges on both ends including new nuts, bolts, washers & rubber sheets. Also Providing & Fitting of 01 No. new MS, Foot valve towards river end of the suction pipe. Job includes removal of the damaged/left out part of the pipe bend alongwith damaged flange by using proper tools & tackles carefully without causing any damage to the remaining part of the suction pipe, carriage/shifting of 150mm dia. suction pipe,01 No 150mm dia. MS bend, 06 No.MS flanges with nuts, bolts ,washers ,rubber sheets and allied material as per site requirement by using mechanical transport & head load , making safe and proper working arrangement for holding & fitting of suction pipe with allied material by using chain pulley block and other scuff holding. Fitting the MS material viz. viz suction pipe, pipe bend and foot valve one by one using suitable nuts, bolts & washers after making proper alignment and face matching & welding of flanges on both ends of the respective MS pipes, MS pipe bend alongwith Foot valve by way of welding in multiple layers around the periphery of pipe using superior quality welding electrodes to give sufficient strength to the suction pipe to withstand the water pressure while pumping. Complete job includes cost of material, skilled/semiskilled labour charges, to& fro carriage charges of material by mechanical transport and head load from workshop to LIS Quasbabala ,loading/un-loading, hire charges of tools & tackles required at site including testing & commissioning. Complete Job

HITECH MECHNICALS

M.S J K HYDRAULIC ENGGG AND FABRICATOR WORKS