Vetaranary

Name of Work :- Construction of Animal Dispensary At. Petlad, Dist. Ananad.

BILL OF QUANTITIES

Item Description of Item Rate In

Quantity Unit Amount

No. (with brief specification and reference to book of Figure

[1] Excavation for foundation upto 1.50mt.Depth including 371.00 Cum. 157.16

sorting out and stacking of useful materials and disposing of

the excavated stuff as directed with in all lead & Lift (B)

Dense or Hard soil.

[2] Excavation for foundation 1.50mt. to 3.0 mt. depth including 170.00 Cum. 170.50

sorting out and stacking of useful materials and disposing of

the excavated stuff as directed with in all Lead & Lift (C)

[3] Filling foundation and plinth with sand under floors including 23.00 Cum. 481.80

watering, ramming and consolidating dressing etc, comp.

[4] Filling available excavated earth excluding rock in trenches 297.00 Cum. 136.92

plinth side of foundation etc. in layer not exceeding 20cm. In

depth consolidation each deposited layer by ramming and

[5] Filling foundation and plinth with murrum or selected soil in 157.00 Cum. 294.38

layers of 20 cm. thickness includind watering, ramming and

consolidating etc. comp.

[6] Applying general insecticide pest control treatment to floors, 300.00 Sqm 91.63

cupboards etc including labour materials etc. complete. Using

Imidacloprid 30.5 SCas Per IS 6313 part - II( (0.075%

concentration by mass) is recommended 10.5ml chemical

diluted with 5 liters of water application 0.5 litre chemical

/Sqm of surface is recommended as per I.S

[7] Providing and laying controlled cement concrete M-150 and 24.00 Cum. 4235.94

curing complete including the cost of form work and

reinforcement concrete work in:(a) Foundation footing base

of column and mass concrete.

[8] Providing and laying controlled cement concrete M-250 and 70.00 Cum. 4674.28

curing complete including the cost of form work but excluding

the cost of reinforcement concrete work in Foundation

footing bases of column.

[9] Providing and laying controlled cement concrete M-250 and 13.00 Cum. 7056.87

curing complete including the cost of form work but excluding

the cost of reinforcement concrete work in Column upto floor

two level. Upto ground level.

[10] Providing & laying cement concrete 1: 3 : 6 ( 1 Cement : 3 47.00 Cum. 3412.61

Coarse sand : 6 graded B.T stone aggregate 20mm nominal

size) Curing comp. including cost of form work in foundation

[11] Providing and laying Controlled cement concrete M200 using 26.00 Cum 7742.09

B.T. stone aggregate and curing etc. complete including the

cost of form work but excluding the cost of reinforcement. (a)

Column for All floor.

[12] Providing and laying Controlled cement concrete M 250 using 23.00 Cum. 5999.40

B.T. stone aggregate and curing etc. complete including the

cost of form work but excluding the cost of reinforcement for

(c) PLINTH BEAM having cross sectional area more than

Item Description of Item Rate In

Quantity Unit Amount

No. (with brief specification and reference to book of Figure

[13] Providing and laying controlled cement concrete M-150 and 30.00 Cum. 4472.28

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in

Plinth PLINTH Slab .

[14] Providing and laying controlled cement concrete M-200 and 11.00 Cum. 6364.01

curing complete including the costof form work but excluding

the cost of reinforcement for reinforced concrete workn in

Wall caps / Coping / Lintel bends Ground Floor.

[15] Providing and laying controlled cement concrete M-200 and 26.00 Cum. 6622.88

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in

BEAMS For All Floor.

[16] Providing and laying controlled cement concrete M-200 and 4.50 Cum. 7733.38

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in

LINTELS All Floor.

[17] Providing and laying controlled cement concrete M-200 and 1.30 Cum. 6775.51

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in

CHHAJJAS All Floor.

[18] Providing and laying controlled cement concrete M-200 and 49.00 Cum. 6560.28

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in

slabs for All Floor.

[19] Providing and laying controlled cement concrete M-200 using 2.00 Cum. 8761.72

B.T. stone aggregate and curing complete including the cost of

formwork but excluding the cost of reinforcement for

reinforced cement concrete work in staircases for all floor

[20] Providing T.M.T. bar FE500/500D reinforcement confirmed 25720.00 Kg 77.29

to for R.C.C. work including bending, binding, and placing. In

position comp. Up to floor two level. For All Floor

[21] Brick work using common burnt clay building bricks having 55.00 Cum 4214.33

crushing strength not less than 35 Kg./Sq.m. in foundation

and plinth in cement mortar 1:6 (1 cement:6 fine sand) (b)

[22] Brick work using common burnt clay building bricks having 83.00 Cum 4502.99

crushing strength not less than 35 Kg./ Sqm. in cement

mortar 1:6 ( 1 cement : 6 Fine sand ) in super structure above

plinth level upto All floor level (Conventional)

[23] Half brick masonary in common burnt clay building bricks 16.00 Sqm 750.76

having crushing strength not less than 35kg./sq.cm. in cement

mortar 1:3 (1 cement : 3 coarse sand ) with 2nos. of 6mm dia

mild steel round bars every three coarse embedded in cement

mortar in superstructure for All floor (Conventional)

[24] Steel work, welded in built up sections framed work including 10.00 Qtls. 9108.48

cutting, hoisting, fixing in position and applying a priming

coat of red lead paint. (A)In beams and joists, channels angles

Tees, flats, with connecting plates or angle cleats as in main

and cross beams. Hip and jack rafters, purlins conneted to

common rafters and the like

Item Description of Item Rate In

Quantity Unit Amount

No. (with brief specification and reference to book of Figure

[25] Providing and fixing of Ridge flashing for roof panel shall be 58.00 Sqm 867.39

made out of 0.5 mm thick pre coated GI sheet . The Precoated

sheet shall be of minimum 240 mpa steel grade confirming to

IS 14246:1995 and shall have zinc coating of minimum

gsm as per IS:277:1992 , 5-7 microns epoxy primer on both

side of the sheet and polyester top coat 15-18 micron. The

PPGI Sheet shall have plastic protective guard film of

minimum 25 microns to avoid scratches during

transportation. The ridge shall be fixed to the steel members

by pop rivet or self drilling/self stitching fastners @

maximum 450 mm c/c along length of capping/flashing etc

[26] Providing and fixing rolling shutters of approved make made 12.00 Sqm 3554.40

of 80 mm wide M.S. laths inter-locked together through their

entire length and jointed together at the ends by end locks

mounted on specially designed pipe shaft with bracket plates,

guide channels and arragements for inside and outside

locking with push-pull operation including the cost of hood

cover and spring etc. complete.(A) Shutters having width

[27] Providing and fixing Entrance double door with floor spring 6.00 Sqm 5017.68

and pivoted shutter made from Teak wood 5cm x 15cm styles

and 6 No.s 5cm x 5cm Teak wood rails covered with 6mm

thick water proof ply finished with both side lamination

colour & shade to be approved by architect and 60cm long

stainless steel handle, Stopper all required Fixture &

Fastening as detailed.

[28] Providing and fixing door Double shutter having factory 27.00 Sqm 4661.15

fabricated std. Extruded aluminium colour anodized hollow

section {Section 63.50 x 38 mm x 2.50 mm thick } for door

frame, hollow portion of door frame shall be filled with wood

to be insert for durable grip of door hinges, with factory

made 38 mm.thick flush door both side pre laminated with

Lever Mortice lock , SS Aldrop 30cm long, SS Handle size

Cm Long, Tower Bolt size 20 cm etc. as per detail colour &

pattern approved by this office including necessary anodized

alluminum fixtures and fastenings.

[29] Providing and fixing door Single shutter having factory 11.00 Sqm 4800.53

fabricated std. Extruded aluminium colour anodized hollow

section {Section 63.50 x 38 mm x 2.50 mm thick } for door

frame, hollow portion of door frame shall be filled with wood

to be insert for durable grip of door hinges, with factory

made 38 mm.thick flush door both side pre laminated with

Lever Mortice lock , SS Aldrop 30cm long, SS Handle size

Cm Long, Tower Bolt size 20 cm etc. as per detail colour &

pattern approved by this office including necessary anodized

alluminum fixtures and fastenings.

[30] Providing and fixing FRP frame size 100x50 mm and 28mm 5.00 Sqm 2377.76

thick FRP depress panel shutter having extra reinforcement

on sides & edges in Gel coat finish. The core of the shutter &

frame is to be filed up with injected fire retardant grade

polyurethene foam done in situ alongwith embedded wooden

pieces for stiffening & also taking hinges & fintures. The

whole FRP frame & shutter is to be water proof weather

proof, termite proof & resistance to mild acid/alkali. Rates are

to be inclusive of S.S hinges with necessary screws &

alluminium fixtures & fastenings & fastener sleeve.

Item Description of Item Rate In

Quantity Unit Amount

No. (with brief specification and reference to book of Figure

[31] Providing and fixing Anodized Alluminum Section Jindal 43.00 Sqm 3386.53

Deluxe Sliding Window System C30 series THREE track

window as outer frame Top & Side 20837and bottom with

gutter 21203 and shutter top & Bottom 20933and interlock

20553 and Side hangle 20553used in sjutter with 5mm thick

transparent plain float glass, with transparent silicon sealant

with allu. anosized coated fittings and fixture etc complete.

[32] Providing and fixing 12mm thick ( tuffen) glass partition wall 25.00 Sqm 4040.00

and rough surface with neccessay fitting and fastening etc.

[33] Providing and fixing standared extruded of alluminium 1.10 Sqm 1175.56

section of size 63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt

with colour anodized alluminium frame for ventilation with

mm thick frosted glass as details etc complete for Ventilation

[34] Providing and fixing Safety grills of required pattern for 1050.00 Kgs. 111.40

windows/ Door using necessary 16mm square M.S bar at M.S

flats at 10cm C/C horizontally spacing including cutting,

welding and fabrication etc. including one coat of primer of

approved quality and two coats of oil painting as per detail

drawing etc complete.

[35] Painting two coats (including priming coat) on new steel and 59.00 Sqm 129.13

other metal surface with enamel paint, brushing, interior to

give an even shade including cleaning the surface an even

shade including cleanicn the surface of all dirt, dust and other

foreign matter.

[36] Providing and laying Machine cut, Free edges, Machine 27.00 Sqm 2627.01

polished Green Marble stone slab 18 mm (Average) thick

{Single piece not more than 150 cm } for stair steps and riser

as per design incl. full moulded round front edge & 1 cm

nosing & necessary groobe on trade of steps laid on 20 mm

thick cement mortar 1:6 (1 -cement : 6 coarse sand ) jointed

with grey cement slurry including rubbing and polishing etc.

[37] Providing and laying Vitrified tiles 8 to 10 mm thick , 36'' x 180.00 Sqm 1531.82

36'' in flooring treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1-cement : 3-coarse sand )

finishing with flush pointing in white cement.

[38] Providing and laying Vitrified tiles 8 to 10 mm thick , in 10.00 Sqm 1592.40

skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1-cement : 3-coarse sand) and jointed with white

[39] Providing and laying Ceramic tiles 6mm thick in flooring 6.00 Sqm 997.16

treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with

flush pointing in white cement.Antiskid

[40] Providing and layingCeramic tiles 6mm thick in skrting risers 42.00 Sqm 1030.57

of steps and dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with white cement slurry

[41] Providing and fixing pre-cast Rubber Dye / steel Dye inter 78.00 Sqm 706.93

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and as

per approved design Confirming to IS 15658 : 2006 including

35 mm Sand layer for levelling and filling the joint with sand

in proper line and level as per guidlines of IRC : SP 63-2018

Item Description of Item Rate In

Quantity Unit Amount

No. (with brief specification and reference to book of Figure

[42] Providing and fixing pre-cast concrete kerb stone of gray 78.00 Rmt 374.92

cement based concrete block 30cm length,30cm height and

15cm thick of M250 grade concret as per approved design

and including excavation for fixing in proper line and

level,filling the joint with C:M 1:3 (1cement:3fine sand) etc

[43] Providing and applying " Concentrate concrete waterproofing 212.00 Sqm 472.68

By Crystallization" to be supported by at least two

international Test reports showing clear scanning Electron

Microscopinc (SEM) Photographs of dandified and mature

crystals formation to plug all the capillarytracks and pores of

the concrete permantly and permeability tested as per IS

2645 (2003) conducted by Gujarat Engineering Reserch

Institute (GERI). The treated concrete should exhibit higher

compressive strength as per IS 516 (2008) tested by GERI.The

product should demonstrate the reduction of chloride

penetration in treated concrete by 72 % as per ASTM C 1202-

05 Conducted by a National Accreditation Board for Testing

and Calibration Laboratories (NABL) accredited laboratory

including applying mortar mixed with crystalization chemical

to cracks, holes, reglets and coving areas. The Product must

have passed the overall migration test as per 21 CFR 175-300

of US-FDA conducted by central food Technological Research

institute (CFTRI). The product should be able to supress the

chemical erosion to 1/8 of standard samples when subjected

to a 5% sulfuric acid solution environment. The poduct to be

listed as crystalline Waterproofing in at least three ICC-ES

EVALUATION REPORT INDEX and it should be green certified

under any Ecolable program,. Work shall be carried out as per

the technical details provided in the technical section of the

tender / Aprroved method of waterproofing accepted by

Engineer in Charge. ( Plan area shall be measured )

[44] Providing and laying water proofing tretment with chaina 212.00 Sqm 1100.90

mosaic tiles flooring over avg 40 mm C.C. 1:2:4 ( 1 Cement,

sand, 1 Kapchi 20mm + 3 grit 6mm to 10mm ) bedding for

maintaining slope for plain and curve surface & 12 mm to

mm of broken piece of ceramic / glazed tiles ( one or more

color as directed ) to be laid over cement mortar bedding of C

M 1:3 (1 cement : 3 sand ) containg one Kg. of water profing

materials per bag of O P C at plain or / and slops and to be

tempered to bring mortar ceramic up to surface with using

white cement and colour pigment including rounding of

junctions and extending them up to 15 cm along the wall and

curing with bends any pattens or design as per drawing and

cleaning by using oxalic acid etc complete.

[45] Providing and laying Mirror polished Machine polished Green 34.00 Sqm 2736.09

Marble stone slab 18mm (Average ) thick for doors &

windows sill & Jams clading as per design including full

moulded round front steps & 1cm nosing & necessary groove

on trads of steps ;laid on 20mm thick cement mortar 1:6 (

cement : 6 coarse sand ) jointed with gray cement sluury

including rubbing and polsihing etc. complete.for Doors /

windows sill & jams clading.

Item Description of Item Rate In

Quantity Unit Amount

No. (with brief specification and reference to book of Figure

[46] Providing 20 mm thick double coat mala cement plaster on 719.00 Sqm 283.95

interior brick / concrete work for plastering comprising of

base coat of 12 mm thick cement plaster in cement mortar (1

Cement : 4 coarse sand) in rough finishing and 8 mm thick top

coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished

with trovel including scaffolding curing etc. complete. For

[47] Providing 10mm thick cement plaster in single coat on 246.00 Sqm 228.34

brick/concrete walls for interior plastering upto floor two

level and finished even and smooth in (i) Cement mortar 1:3

(1-cement:3-sand) including finishing with a flating coat of

neat cement slurry etc. complete. for Ground Floor

[48] Providing and fixing chiken mesh jali with square of 12.50 x 75.00 Sqm 92.92

12.50 mm of 25 gauge at junction the Brick.masonary and

reinforcement cement concrete member including fixing

materials scaffolding labour etc. complete

[49] Wall painting with Applying two coats of putty & two coats of 719.00 Sqm 165.99

primer of approved brand (three coats) plastic emulsion paint

of approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

[50] Wall painting with Applying two coats of putty & two coats of 216.00 Sqm 171.52

primer of approved brand & (three coats) with plastic

emulsion paint of approved brand and manufacture on

undecorated ceiling surface to give an even shade including

throughly brushing the surface free from mortar droppings

and other foreign matter and sand papered smooth.

[51] 20mm thick sand faced cement plaster on walls upto height 563.00 Sqm 352.44

10 metres above ground level consisting of 12mm thick

backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick

finishing coat of C.M. 1:1 (1-cement : 1-sand) with 1cm x 1cm

groovs as per pattern sample approved by the engineer

incharge etc. complete.

[52] Providing and fixing 90 cm high Stainless steel railing made 21.00 Rmt 3610.75

from anticorrocive S S pipe of 50 mm dia (16Gauge) as hand

rail with S S 38 mm dia (16Gauge) as a vertical support fixed

in RCC slab at 1.2m c/c including three horizontal S S pipes

of 25 mm dia (16Gauge) at eqal distance fixed by 18.75 mm

dia (16Gauge) S S pipe including accessories as per detailed

drawing as directed etc. complete.

[53] Providing laying and jointing in true line and level 15mm dia. 36.00 Rmt 72.65

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall

be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Item Description of Item Rate In

Quantity Unit Amount

No. (with brief specification and reference to book of Figure

[54] Providing laying and jointing in true line and level 25mm dia. 36.00 Rmt 91.84

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall

be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. [B] 25mm dia.

[55] Providing laying and jointing in true line and level 40mm dia. 30.00 Rmt 148.12

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall

be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.[D] 40 mm.

[56] Providing and fixing concealed center point to wall ceiling & 36.00 Rmt 170.36

floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making good

the wall, ceiling and floor etc. complete.[A] 15 mm.

[57] Providing and fixing concealed center point to wall ceiling & 18.00 Rmt 253.82

floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making good

the wall, ceiling and floor etc. complete. [C] 25 mm.

[58] Providing and fixing Stainless Handle valve of aprroved brand 3.00 No 373.70

[59] Providing and fixing Stainless Handle valve of aprroved brand 2.00 No 549.44

[60] Providing, laying and jointing in true line and level 75 21.00 Rmt 756.22

diametre U.P.V.C (Type B) conforming to IS 13592-1992 with

one end plain and other end socketed with rubber ring, &

fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 110 mm diametre x 149 mm length x

145 mm heigh at every 2000 mm center to center or shall be

concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of all

[61] Providing, laying and jointing in true line and level 110 247.00 Rmt 876.90

diametre U.P.V.C (Type B) conforming to IS 13592-1992 with

one end plain and other end socketed with rubber ring, &

fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 110 mm diametre x 149 mm length x

145 mm heigh at every 2000 mm center to center or shall be

concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of all

[62] Providing and fixing MS Z clamp on Wall or celling for Pipe 100.00 No 75.75

Fitting including all type necessary fittings and accessory etc.

completed as per directed engineer in charge.

Item Description of Item Rate In

Quantity Unit Amount

No. (with brief specification and reference to book of Figure

[63] Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 3.00 No 586.48

100 mm diameter with jali of the following nominal diameter

of self cleansing design with C.I scread down or hinged

grating including the cost of cutting and making good the

[64] Providing and fixing screw down quarter turn heavy duty bib 6.00 No 683.77

taps of following size (A) Brass chromium plated screw down

bib tap (i) 15mm dia. ( Plumber, Mark, Escco or equivalent

[65] Providing and fixing CP brass Quarter turn pillar tap, capstan 3.00 No 809.01

head screw down high pressure with screw, shanks and back

nuts (A) 15 mm dia {Jaquar,Plumber, Mark Long pipe or

equivalent brand}

[66] Providing and fixing wash basin with pedestal of std. Height 3.00 No 1890.72

with single hole for pillar tap with C.I or M.S brackets painted

white including cutting cutting holes and making good the

same including C.P. brass waste and waste pipes and bottal

trap (A) Vitreous China: (ii) Flat Back washbasin 550 mm x

400mm size.In colour.

[67] Pro. & Fix.wash down water closet ( Wall hung w. c .pan) with 3.00 No 11171.61

integral" p " or " s " trap and PVC flushing cistern with a pair

of C.L.I. Or Mild steel Brackets, complete with fittings such as

lead value siphon, 15 mm. Nominal size brass ball valve with

polythene float, C.P. Brass handle unions and couplings for

connections with inlet, outlet and over flow pipes, 40 mm. dia.

flush bend including cutting holes in walls and making good

the same connecting the flush bend with cistern and closet etc

comp incl plastic sheet cover including jointing trap with pipe

in cm 1:1 (a) Viterous china in white or colour

[68] Providing erecting and fixing double coated 4-layer tough 5000.00 Litre 9.54

virgin plast ISI water tank of required capacity each with all

necessary fittings and connection etc. complete on terrace.

[69] Providing and fixing 600mm x 450mm bevelled edge mirrror 3.00 No 859.41

of superior glass mounted on 6mm thick A.C. sheet or

plywood sheet and fixing to wooden pluge with C.P. brass

screws and washers.

[70] Providing and fixing C.P. brass towel rail comlete with C.P. 3.00 No 616.42

brass brackets fixed to wooden plugs with C.P. brass

scews.(B) 600mm x 20mm size.

[71] Providing and fixing S.W. gully trap with C.I. grating brick 2.00 No 1246.92

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight.(i)

Square mouth traps.(B) 150mm x 100mm size P of R type

[72] Providing and fixing CP brass screw down stop cock of 6.00 No 205.83

approved quality 15mm size with adjustable wall flange..or

as per instrction of engineer incharge.

[73] Constructing brick masonry chamber for underground C.I. 3.00 No 2932.93

Inspection chamber and bends with briocks having croshing

strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions, total

weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed concrete

etc. complete.(i) Inside dimensions 455mmx 610mm and

450mm deep for single pipe line.

Item Description of Item Rate In

Quantity Unit Amount

No. (with brief specification and reference to book of Figure

[74] Constructing brick masonry chamber for underground C.I. 12.00 No 3660.76

Inspection chamber and bends with briocks having croshing

strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed concrete

etc. complete.(ii) Inside dimensions 500mm x 700 mm and

450mm deep for pipe line with one or two inlets.

[75] Finishing wall with weather proof exterior emulsion paint on 555.00 Sqm 120.26

wall surface (two coats) to give an required shape even shade

after thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete

[76] Providing thoruting or plaster drip and moulding to R.C.C. 16.00 Rmt 43.05

[77] Providing 12mm wide groove throating / notch in plaster 107.00 Rmt 15.15

including finishing the same etc. complete for all height.

[78] Providing and fixing in position 300mm high , 150mm wide 20.00 No 707.00

englsih letter made from 1.0mm thick stainless steel sheet as

directed by enginer in charge with all necessary tolls & plants

[79] Providing and fixing in position 150mm high , Englsih letter 50.00 No 404.00

made from 1.0mm thick stainless steel sheet as directed by

enginer in charge with all necessary tolls & plants etc.

[80] Excavation for foundation upto 1.50mt. to 3.0mt. depth 8.00 Cum 287.21

including sorting out and stacking of useful materials and

disposing of the excavated stuff as directed with in 50m. Lead

(c ) Hard Murrum

[81] Providing and laying in foundation cement concrete 1:4:8 (1 9.00 Cum 2769.69

cement : 4 coarse sand :8 graded stone aggregate 40mm

nominal size) and curing complete excluding cost of form

work in :(a) Foundation plinth.

[82] Providing and laying ordinary cement concrete 1:2:4 ( 1 3.00 Cum 3757.61

cement : 2 coarse sand : 4 graded stone aggregate 20mm

nominal size) and curing etc. complete including the cost of

form work but excluding the cost of reinforcement.(a) Footing.

[83] Providing and fixing C.I. Manhole cover 0.60 x 0.45 Mt. Size 3.00 No 958.17

having weight not less than 35 kg.

[84] Providing 15mm thick cement plaster in single coat on brick / 91.00 Sqm 232.68

concrete wall for interior plastering up to floor two level

finished even and smooth in cement mortar 1:4 ( 1 Cement :

Sand ) and mixing water proofing materials in cement mortar

in proportion recommanded by the manufacuterer for ground

Item Description of Item Rate In

Quantity Unit Amount

No. (with brief specification and reference to book of Figure

[85] Providing, laying and jointing in true line and level 160 230.00 Rmt 834.38

diametre U.P.V.C (Type B) conforming to IS 13592-1992 with

one end plain and other end socketed with rubber ring, &

fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 110 mm diametre x 149 mm length x

145 mm heigh at every 2000 mm center to center or shall be

concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of all

[86] Box cutting the road surface to proper slop and chamber for 64.00 Cum 109.41

making a base of road work including removing the excavated

stuff and depositing on the road side slope as directed upto50

[87] Providing 150 mm compacted thick WBM using 40 to 63 mm 16.00 Cum 2020.61

size BT metal and 15 % stone scrnning 13.20 mm size and

% stone dust in two layers of 75mm thick for binding material

including spreading , rolling , watering etc. complete as

directed by engineer - in - charge.

[88] Providing and laying cement concrete 1:3:6 ( 1 Cement : 3 16.00 Cum 3257.25

course sand : 6 Crushed stone agg.of 20 mm nominal size) and

curing completeexcluding cost of form work in (a) Foundation

[89] Providing and laying Controlled Cement Concrete M - 200 for 32.00 Cum 5511.57

average 75mm thick wearing coat laid as directed including

Trimix finishing ,curing and filling joints with bitumen

[90] Brick work using common burnt clay building bricks having 9.00 Cum 4496.05

crushing strength not less than 35 Kg./ Sqm. in cement

mortar 1:6 ( 1 cement : 6 Fine sand ) in super structure above

plinth level upto floor two level ( for G.F ) Conventional

[91] Providing and fixing mild steel door with 40 x 40 x 6 mm 200.00 Kgs. 109.99

angle for frame and for shutter frame 30 x 30 x 3 angle. For

windows frame of angle 35 x 35 x 5 & for shutter windows

x25 x 3 mm size angle and 18 gauge sheet for panels & 10 mm

dia bars at 10 cm c/c for grill and 40 x 6 mm flats on edge of

shutter, & 20 x 6 mm binding patti, including one coat of

primer and two coats of oil painting etc. comp. as per detail /

as directed by Engineer in charge.

[92] Providing 15 mm thick Water proof cement plaster for sunk 34.00 Sqm 227.05

in single coat on bricks/ concrete wall for interior plastering

upto floor two level finished even and smooth (ii) Cement

mortar 1:3 (1- cement : 3-sand) and mixing waterproofing

materials of approved brand and manufacture in cement

mortar in proportion recommended by the manufacturer for

[93] Providing and laying white glazed tiles 6mm thick in flooring 19.00 Sqm 953.74

treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with

flush pointing in white cement.

[94] Providing and laying white glazed tiles 6mm thick in skrting 34.00 Sqm 985.47

risers of steps and dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with white cement slurry

Item Description of Item Rate In

Quantity Unit Amount

No. (with brief specification and reference to book of Figure

[95] Providing and laying hand dressed polished blue Kota stone 13.00 Sqm 1019.39

slab flooring over 20mm (Average) thick base of cement

mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 laid over

and jointed with grey cement slurry including rubbing and

semi miror polishing with emery No. 600 etc. complete. (A)

[96] Distempeing (Three coats) with oil bound washable 74.00 Sqm 106.74

distemper of approved brand and manufacture and of

required shade on wall surfaces to give an even shade, over

and including a priming coat with alkali resistance primer of

approved brand after thoroughly brushing the surface and

other foreign matter and also including preparing the surface

even and sand parpered smooth..

[97] Providing cement vata (10cm. x 10 cm. size) quarter round in 19.00 Rmt 24.28

cement mortar 1:1 including neat cement finishing, watering

[98] Providing laying and jointing in true line and level 50mm dia. 90.00 Rmt 195.67

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make

as approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall

be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.[E] 50 mm.

[99] Providing and fixing S.S Butterfly valve of IS aprroved brand 2.00 No 808.00

[100] Excavation for foundation upto 1.50mt. Depth including 144.00 Cum 268.92

sorting out and stacking of useful materials and disposing of

the excavated stuff as up to 50m. Lead(C) Hard Murrum

[101] Constructing brick masonry chamber for underground C.I. 10.00 Nos. 7180.44

Inspection chamber and bends with briocks having croshing

strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455 mm x 610 mm intenal dimensions

total weight of cover with frame to be not less than 38Kg. (Wt.

of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed concrete

etc. complete.(ii) Inside dimensions 600mm x 850 mm and

450mm deep for pipe line with one or two inlets.

[102] Providing water harvesting pit 2.40 mt dia x 2.40 mt depth 3.00 Nos. 72989.67

with excavation in any strata filling the pit with brick bats in

0.60 mt depth, 0.30 mt with 25mm to 40mm kapchi 0.30 mt

with 10mm to 20mm kapchi & 2.00 mm depth with coarse

sand in layer including maing the lines (PVC) for water inlet

etc. as directed including 250mm dia bore work with 6" PVC"

pipe upto 35mt etc, comp.

[103] Providing & Erecting Point wiring for Light / Bell with 2-1.5 74.00 Pt. 485.81

sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length , in below type of pipe erected with

6A Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered

with textured/metallic/white front plate modules erected on

/ in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed. (f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III

Item Description of Item Rate In

Quantity Unit Amount

No. (with brief specification and reference to book of Figure

[104] Providing & Erecting Point wiring for FAN with 2-1.5 sq.mm 18.00 Pt. 674.68

& earth wire of 1.5 sq.mm (Green) both are of .ISI marked

KV Grade FRLS PVC insulated multi strand copper wires up

to 10 mtr length, in below type of pipe erected with 6A

Modular type switch and hum free EME step type electronic

fan regulator mounted and accessories with earth continuity

of following type erected on PVC / Metallic/Wooden box,

single mounting base frame covered with

textured/metallic/white front plate modules erected on / in

wall / ceiling as per pipe erected. with necessary ceiling rose

/ H.D.Connector as directed. (f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ceiling

complete Cat. III

[105] Providing & Erecting Point wiring for on board Looped Plug 38.00 Ea. 257.55

with 6A Modular type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate modules erected

on / in wall / ceiling with following type accessories Cat. III

[106] Providing & Erecting following type of Modular Type 5.00 Ea. 25.25

Accessories mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured / metallic/white

front plate , modules erected with necessary connections as

per site situation directed by Engineer In charge. (7) Blank

Plate Single Cat.III

[107] …Do….(9) 16 Amp. SP one way switch Cat.III 17.00 Ea. 180.79

[108] …Do….(10) 6/16Amp. Universal socket Cat.III 17.00 Ea. 199.98

[109] …Do….(14) 16A/ 20A/ 25A/ 32A Double Pole Modular MCB 7.00 Ea. 410.06

[110] Providing and erecting Mains with 1.1 KV grade FRLS PVC 548.00 Mtr. 82.82

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of

following size (A) With medium class Rigid PVC pipe and

accessories (b) 2 wire 2.5 sq. mm

[111] Providing and erecting Mains with 1.1 KV grade FRLS PVC 100.00 Mtr. 260.58

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling with

2.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size (A)

with medium class Rigid PVC pipe and accessories (h) 4 wire

[114] providing and erecting Mains with ISI marked, 1.5KV grade 90.00 Mtr. 91.91

electrolyte multi stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required. (f) One wire 10.00 sq. mm

[115] …Do….(i) One wire 35.00 sq. mm 10.00 Mtr. 300.98

Item Description of Item Rate In

Quantity Unit Amount

No. (with brief specification and reference to book of Figure

[116] Providing & erecting Switch board for Computer or electric 15.00 Ea. 1133.22

apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with

single mounting base frame covered with textured/metallic

/white front plate,modules erected with necessary

connections as directed1 no. 6A/16A universal plug-switch

combined. 3 nos. 6A Switch , 3 nos. 6A , 5 pin Plug For

Modular Type Accessories Cat. III

[117] Providing & erecting Decorative call bell Ting-tong box type 2.00 Ea. 71.71

250 volts complete erected

[118] Providing and erecting LED indoor fittings with LEDs of 13.00 Ea. 535.30

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%,CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED driver efficiency >

85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (A) Tube Light with

integral driver (v) 36-40 Watts, Surge-2 KV, IP-20,

conventional 4 feet Cat-lll

[119] ..Do…(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 3.00 Ea. 165.64

[120] Providing and erecting LED indoor fittings with LEDs of 10.00 Ea. 427.23

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance

with diffuser housed in aluminium casted body with

company mark/name 160V to 270V,Power Factor more than

0.95, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy>

LED driver efficiency > 85 % ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (A)

Square/ Circular shaped Surface/Recessed Mount Downlight

with provision for spring loaded mounting clips

complete.IP20 (ii) 11-15 watts, Surge-2 KV Cat-lll

[121] ..Do…(iv) 22-24 watts, Surge-2 KV Cat-lll 43.00 Ea. 758.51

[122] Providing and erecting Approved make Four pole moulded 3.00 Ea. 8055.76

case circuit breaker having breaking capacity ICU of 35 KA. at

415 V. having normal current rating 125A. with Fixed

thermal & magnetic release suitable to work on A.C.supply

c/s. with all internal connections, spreader tinned copper &

complete erected in existing 16 G.M.S. housing. ICS=100% of

ICU only Cat III

[123] Providing and erecting following additional parts for panel 3.00 Ea. 873.65

mounting MCCBs (A)Extended operating rotary handle with

pad lock with three position trip,off,on suitable for 25A to

A panel mounting cat-III

[124] Supplying & erecting approved make Four Pole 415V change 1.00 Ea. 12241.20

over switch interior for panel mounting with operating

mechanism A.C.23 duty confirming to IS for (D)200A Cat-lll

Item Description of Item Rate In

Quantity Unit Amount

No. (with brief specification and reference to book of Figure

[125] Supplying and erecting triple pole & neutral 440V / 500V 1.00 Rn Mtr 3202.71

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than 1.6 Amp.

/ sq.mm (Rated current / cross section area) duly wrapped

with colour insulating tape for phase sequence of following

current carrying capacity, erected with necessary bus bar

supports /insulators, main cable socket to each bar, erected in

existing cubical panel with necessary connections. (B)

Suitable for 200 Amp. capacity

[126] providing and erecting Miniature circuit breaker single pole 40.00 Ea. 112.11

6A to 25A suitable to operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark Cat.III

[127] Providing & erecting 240 V MCB double pole switch for motor 12.00 Ea. 330.27

& inductive load (C Curve) having 10 KA breaking capacity

& confirms to IS : 8828 in existing box having following

capacity (B) 40 Amp. Cat.III

[128] Providing & erecting 415 V MCB Four Pole for Motor & 5.00 Ea. 668.62

Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following capacity

(b)40 Amp. Cat.III

[130] Providing and erecting Sheet Steel powder coated MCB 3.00 Ea. 3412.79

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (B) three phase

incoming and single phase horizontal type outgoing Per

phase isolation type (PPI) (b) sheet steel double door (iii)8

[131] ..Do…(A) single phase incoming and horizontal single phase 1.00 Ea. 1152.41

outgoing (b) sheet steel double door (IP-43) (iii)8 way

[132] Providing and erecting Approved make RCCBs conforming to 10.00 Ea. 2235.13

IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on

single phase 240 V,50Hz. having characteristic of quick action

& tripping with all advance feature & do not incorporate any

electronic component. for following Max. rating erected as

directed (ii) 40Amps. DP Cat. III

[133] Providing and erecting Annealed bare Copper wire 8 to 16 2.00 Kg. 794.87

Item Description of Item Rate In

Quantity Unit Amount

No. (with brief specification and reference to book of Figure

[134] Providing and erecting earth pit of minimum bore dia.150mm 2.00 Ea. 4591.46

size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia of 50mm having

80-200 Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy

duty cover.(approved make OEM has to submit test

certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 meter testing

as per IEC 62561-2017, Voltage drop:- < 1 volt at no load &

dry form, Sulphar content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to retain moisture for

long time Necessary test report must be submitted. (a) For

Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr Back filling compound - 1 Nos Bag of

[135] Providing & erecting weather proof, dust & vermin proof, 1.60 Sq Mtr 14902.55

floor mounted front operated indoor type cubical panel

board necessary IP-42 and above protection as per approval

from engineer incharge made from 14 SWG thick CRC M.S.

sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories , supporting

angles/ flats channel including cutting, bending, drilling,

welding, riveting with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge with

erection of supplied switch gears, BUSBARS, suitable size of

inter connecting PVC copper wire / copper-aluminium strips,

rubber grommets, rib, bakelite control fuses/MCB for

measuring instruments, earth bus & earth bolts, foundation

flange - bolts-base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber gasket,heavy

duty end terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be

painted with epoxy powder coating. (The rates excludes the

cost of switchgears, bus bars, inter connecting mains &

Copper Aluminium strips, meters, Fuses etc. The dimension

shall be measured excluding base beams) The panel shall be

supplied with following approved manufacturers with

following size. (B) The standard companies switch gear shall

be used and only manufacturers at CPRI approved factory (i)

with 350 mm depth

[136] Providing , erecting , fabricating the M.S. structure as per 40.00 Kg. 77.77

requirement on site incorporating proper size of M.S.

angles,square,round, flats, bars, channels, sections complete

with cutting, welding, grinding & finishing duly painted with

one coat of red oxide with erection on site as per direction of

engineer in charge with necessary grouting, cementing,

plastering & finishing complete.

[137] Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 75.00 Mtr. 284.82

cable multistrand Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing trench / pipe of

following size of cables (C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2

Item Description of Item Rate In

Quantity Unit Amount

No. (with brief specification and reference to book of Figure

[138] Making trench in soft soil of suitable width of 90 cm deep for 55.00 Mtr. 55.55

laying cable or locating the fault all over the run and back

filling the same and making the surface as normal ground.

[139] Providing & laying approved make ISI marked HDPE 6Kg / 55.00 Mtr. 163.62

cm2 (Class-3) as per IS:4984:1995 PE-80 to be erected at

road crossing on or floor as directed for laying of cable. The

pipes as following size of dia & weight per 6 mtr. (B) 50 mm

[140] Providing and, fixing heavy duty flange type brass cable gland 6.00 Ea. 38.38

with rubber ring for PVC insulated armoured cable complete

with out going tails, insulating tape etc for following size of

(B) 2 to 4 core 6 Sq. mm

[141] Providing and, fixing heavy duty flange type brass double 6.00 Ea. 75.75

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. (B) 3 & 1/2

core 35/50 Sq. mm

[142] Solder less crimping type Aluminium lugs conforming to IS 5.00 Ea. 15.15

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (C)

[144] Providing and erecting Approved make Ceiling fan with 17.00 Ea. 1596.81

double ball bearing ISI mark with condenser A.C. 23OV.50

c/s.1200 mm. sweep complete, canopy erected on existing

hook or clamp with earthing.

[145] Providing and erecting 19 / 20 mm. nominal bore Medium 17.00 Mtr. 108.07

Class M.S. Pipe down rod erected duly painted for fan

complete with proper insulation without leakage and earthing.

[146] Supplying & erecting fan hook box of 10 mm M.S. round bar 17.00 Ea. 108.07

bounded to the RCC bars up to 50mm length each side and

pierced through a 16 Gauge M.S. box / Heavy Duty PVC box

complete erected concealed in Ceiling with necessary

[147] Providing and erecting approved make low noise decorative 3.00 Ea. 1366.53

exhaust fan having square frame ABS body with inbuilt

lowers & square frame. 250mm with 1350 RPM Cat.II

[148] Providing and erecting water cooler having storage capacity 1.00 Ea. 49559.69

80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp

of 45˚ C. The outlet temp. of the water should drop by 15˚ C

within a hour, The water cooler should be comprising of

hermetically sealed compressor, fan motor, condensing unit,

water tank surrounded by evaporating coil, thermostats, relay

etc. complete with necessary inlet & outlet connection. The

body of water cooler will be made from Stainless Steel. ◦

[149] Supplying & erecting 5 stage single reverse osmosis water 1.00 Ea. 15620.66

purification system with M.S. powder coated frame, prefilter

housing with 'O' ring presediment filter GAC filter, carbon

filter suitable buster DC pump capacity 80 psi, mention with

40 psi inline type post carbon filter auto low & high pressure

switches with following size of storage tank & LPH capacity &

erected as directed [B] 25 Ltr / Hr with 30 Ltr. Storage Tank

Item Description of Item Rate In

Quantity Unit Amount

No. (with brief specification and reference to book of Figure

[150] Providing & erecting open well horizontal mono block pump 1.00 Ea. 18746.61

set with cast iron body, complete for three phase submersible

motor having [D] For 5 HP 3 phase open well horizontal mono

block pump set suitable for 1350 LPM to 310 LPM @ 10 to

Mtr head suitable for 50/65 mm dia delivery pipe Cat.II

[151] Supplying & erecting approved make motor control cubical 1.00 Ea. 7722.46

panel (Direct - on - line) made from 16 G. CRCA sheet duly

epoxy powder painted inside and outside with hinged doors

and locking, arrangement consisting of suitable size of ON-

OFF isolator (AC - 3/23duty) main fuses, single phasing

preventer, indicating lamps for R- Y - B phases, overload

relay, Automatic water level controller, Ammeter, Voltmeter

each with two way selector switch incoming, wires duly

socket crimped, main contactor & overload relay, start - stop

push buttons, to be erected on angle iron frame grouted on

wall as directed. The isolator, overload relay & contactors will

be of L & T, Siemens or BCH make only. (A) DOL up to 5.0 H.P.

[152] Lowering of submersible motor pump set at the depth of 1.00 Per Job 856.48

following ,complete with required. Nos. and size of casing

pipes erected by means of proper chain pulley block & pipe

wrenches after checking of threads of each pipe with coupling

to take the load of the pump set and pipe assembly filled up

with water (D)For Open well Horizontal submersible pump

set for sump well (i) 1 HP to 5 HP

[153] Providing and erecting ISI marked PVC insulated PVC 20.00 Mtr. 146.45

Sheathed Flat flexible Submersible copper cable approved

make of following Size. (C) 3 Core x 4 Sq. mm

[154] Providing Water proof straight Joint in PVC insulated flat 1.00 Ea. 189.88

flexible copper cable by using insulating material, water

proofing material, & making the joint complete. (A) Up to

[155] Supplying & erecting ISI Marked (Embossed) following size 10.00 Mtr. 262.60

of “B” Class G.I . Pipe & erecting as directed by Engineer-in-

charge with necessary plumbing as desired. (D) 50 mm dia

[156] Supplying & erecting Mild Steel heavy duty Flanges with 1.00 Ea. 130.29

rubber packing and hardware materials for pipe connections

suitable for (A) 50 mm (2")

[157] Supplying and erecting ISI marked sluice valve at position 1.00 Ea. 803.96

with necessary material for following size of pipe diameter.

[158] Supplying, & erecting C.I. swing, check type non-return 1.00 Ea. 1020.10

(Reflux) Valve -ISI marked suitable for following size (A)

[159] Supplying and erecting approved make panel mounting type 2.00 Ea. 1275.63

Digital Voltmeter having 3 digits LED display, 0 to 750 AC

Volts range erected on existing panel board with all

connection, wiring etc .with manufacturers calibration

[160] Supplying and erecting approved make panel mounting type 2.00 Ea. 1558.43

Digital Ammeter having 3 digits LED display, external CT

operated, calibrated for 0 to 1000 Amps suitable to operate

on 500 Volt AC , erected on existing panel board with all

connection, wiring etc .with manufacturers calibration

[161] Supplying and erecting Ammeter / Voltmeter selector switch 4.00 Ea. 317.14

for 3 phase AC Supply 500 V on existing panel board with

necessary connections.

Item Description of Item Rate In

Quantity Unit Amount

No. (with brief specification and reference to book of Figure

[162] Providing & erecting L.T. Current Transformer with bar 6.00 Ea. 274.72

primary 50/5 to 1000/5 ratio 15 VA burden erected in

existing CRCA box duly secured with insulating materials

connected to the meter

[163] Supplying and erecting approved make suitable panel 6.00 Ea. 43.43

indicator LED type lamp, lens cover, complete erected with

necessary connections.

I/We am/are willing to carry out the work at…......................% above/below percent(Should be written in figures

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

5. Credit of Dismantal Material amount of Rs. must be recovered from Contractor's R.A Bill.

6. Payment will be given only if the material testing result is satisfactory.Testing of material shall be done as per

Dated Signature Deputy Executive Engineer Executive Engineer

the Contractor. Panchayat R & B Sub Div Panchayat R & B Div