Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
₹38 L
EMD Value
₹76,000
Closing Date
1 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE GOLCONDA
GE GOLCONDA LANGER HOUSE OPP MILITARY HOSPITAL HYDERABAD TELANGANA-500 008
ADDN/ALTN OF TYPE V QTRS P-5076, P-5078, P-5082 and P-5084 AT YEDDUMAILARAM UNDER GE GOLCONDA
2023_MES_584086_1
8651/E8
Open Tender
Civil Works
Item Rate
180 days
YEDDUMAILARAM
As Per Tender
8 documents required · 8 mandatory
₹500
GE GOLCONDA
₹76,000
Yes
6 Apr 2023
3 Mar 2023
3 Apr 2023
3 Mar 2023
1 Apr 2023
17 Mar 2023
Amount
Dismantling of mild steel work as in steel windows of any description.
S&F Aluminium anodised powder coated 3 track frame for sliding windows (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tublar sections / appropriate Z sections and other sections of approved make confroming to IS: 733 and IS:1285, fixing with dash fasterners of requred dia and sized, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, strainght, mitred and jointed mechanically wherever requred including cleat anle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as specified and directed.
S&F Aluminium anodised Powder coated sections for sliding window shutters (minimum thickness of powder coating 50 micron) for windows & ventilators including providing and fixing hinges / pivots and provision and fixing of fittings as required includidng the cost of EPDM rubber / neoprene gasket required. Approved make conforming to IS: 733 and IS: 1285.
S&F Sheet glass ordinary quality 5.5 mm thick and glazing with neoprene gaskets area exe 0.5 sqm in each pane for Aluminium sliding shutters.
S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.4 mm , fixed in Aluminium sliding shutters.
S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design / pattern, with approved standard section and fixed to the existing window frame with C.P. brass / stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as specified and directed.
S & F powder coated (minimum thickness of powder coating 50 micron) aluminium anodised frame for doors with one or more rebates including joining cleat for fixing, etc complete all as specified and directed.
S & F for powder coated (minimum thickness of powder coating 50 micron) aluminium anodised ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws complete all as specified and directed.
S&F 5.5 mm thick sheet glass, ordinary quality, obscured or frosted on one side fixed in aluminium door/window/ventilator glazing with rubber beading complete all as specified and directed.
Dismantling timber scantlings in fillets, rails, post , rafter, purlin etc under 40 Sqcm in section in any position unframed work complete all as specified and directed.
M&L for 2nd Class hardwood plain fillets, square or triangular in section, clean swan, secured with nails or brads, croos sectional area exc 13 Sqcm but not exc 25 Sqcm complete all as specified and directed.
Dismantling boarding, any description, fixed with screws complete all as specified and as directed.
M& L 19 mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as in kitchen cabinet including fixed on wall by drilling and bolting etc complete all as specified and as directed.
M&L for 1.5 mm thick Decorative laminates type I, or surface finish, colour and pattern as approved.
M& L for Two coats French polishing on surfaces of any description, width or girth, cleaning and preparing the surface including a coat of wood filler on new works complete all as specified and as directed.
M & L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and as directed.
M&L for external teak wood lipping, 6mm thick fixed with nails complete all as specified and as directed.
S&F Nickel plated Auto closing concealed Hydraullic Hinges with two holes for cabinet doors all as directed.
S&F 75mm stainless steel handles, cast type, polished for cupboard shutters.
S&F 50mm stainless steel butt Hinges, cast type, polished for cupboard shutters.
S&F 50mm stainless steel tower bolt , cast type, polished for cupboard shutters.
S& F Mild steel drawer slides complete all as per manufacturer instructions and as specified.
Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) and removing complete.
S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling fixing in opening etc.
S & F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick(stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face complete all as specified and as directed.
S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 and fixed to PVC Doors complete all as specified and as directed.
S&F 125 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed.
S&F 125 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
Taking down Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) complete all as specified and as directed.
Taking down shutters of any description exc. 1 Sqm but n exc 2.00 sqm each complete all as specified and directed.
Taking down shutters of any description exc. 2.0 Sqm each complete all as specified and directed.
S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed.
S & F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles confirming to Fe 410-O 0r Fe 310-O complete all as specified and as directed.
S & F 35 mm thick FACTORY MADE plain, framed, panelled shutters ( two panels), with lock rail and panels of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.
S&F 35 mm thick 2nd class hard wood gauzed and skeleton shutters for doors open rebated and prepared to receive glass, gauge etc., divided into square with plain chamfered or rounded mitered and rebated sash bars, any number, edges of framing, plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters all as specified in SSR Part-I Section 8 clause 8.20 (a) complete all as specified and as directed.
S & F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with wooden beeds complete all as specified and as directed.
S & F 100 mm long medium weight, cold rolled mild steel Butt hinges.
S&F 150 mm length of extruded aluminium alloy handles, fabricated type, anodised
S&F 150 mm length of aluminium anodised barrel tower bolts of extruded section and fixed.
S & F for alluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 300 mm complete all as specified and directed.
S&F 175mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
S & F 150 mm long floor door stopper of aluminium alloy body, and tongue, ISI marked, anodised, with hard drawn steel spring, fixed in floor all as specified and as directed
S&F curtain rod 25mm dia MS decorative type, powder coated complete all as specified and directed.
S&F 25 mm dia MS brackets to curtain pipe, decorative type powder coated complete all as specified.
Dismantling Stone slabs and tiles of any description or thickness in floors,plinth protection, aprons etc Laid, bed-ded and pointed in any mortar,complete all as specified and as directed.
M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.
Taking down cement plaster on wall of any description incl racking out joints for key, scrubbing with water etc. complete all as specified and directed.
M & L for rendering 15mm thick in cement mortor 1:4 on concrete or brick wall surfaces, finished even and smooth without using extra cement, mixed with WPC @ at 3% by weight of cement (IWPC measured and paid separately) complete all as specified and directed.
Supply only integral water proofing compound.
M & L for rendering 10mm thick in cement mortor 1:6 on Brick wall surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M&L for two coats of oil bound distemper over a coat of alkali resistant primer on newly plastered surfaces of walls including 1.5mm thick wall care putty on wall and preperation of surface complete all as specified and directed.
M&L for preparing new plastered surfaces of walls and applying Two coats of cement based paint complete all as specified and directed.
M&L for rendering 5mm thick in CM (1:3) as in ceilings, concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed.
M&L for preparation of new ceiling surfaces and applying three coat of white wash complete all as specified and directed.
M&L for Praparation of old plastered surfaces and applying One coat of White wash on Ceiling complete all as specified and directed by Engr-in-Charge.
M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified and as directed.
M&L for complete removal of existing treatment and applying two oil bound distemper over a coat of alkali resistant primer on old surface of walls including 3mm thick wall care putty complete all as specified and directed.
M&L for complete removal of existing treatment and applying two coats of cement base paint on walls surfaces complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description of any position not otherwise specifically provided for as in sunken floors & floor etc complete all as specified and as directed.
Demolition of floor, hearth or wall tiling incl cement mortar bedding (but not backing) and removing rubbish of the premises complete all as specified and directed by Engr-in-Charge.
M&L for 25mm thick cement concrete (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in levlling course complete all as specified and directed.
M&L for non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc., laid over and including 15mm thick cement screed bed or bedding layer in CM (1:6), tiles jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, compelte all as specified and directed.
M & L for glazed ceramic tiles in vetical surfaces, size of tile 300mmx200mmx7mm thick laid over 10mm thick back coat in CM (1:4), set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles, complete all as specified and directed.
M&L for 15 mm bore GI Tubing medium grade with all fittings fixed to wall/ ceiling or in floor including taking out old GI tubing with fittings complete as specified and directed.
M&L for 20 mm bore GI Tubing medium grade with all fittings fixed to wall/ ceiling or in floor including taking out old GI tubing with fittings complete as specified and directed.
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 ltrs capacity hoisted and fixed in position all as specified including dismantling old tank complete all as specified and directed.
S&F 20 mm dia brass ball valve, high pressure with polythene float and fly-nut complete, screwed for iron pipe or brass ferrule fixed in repair complete all as specified and directed.
S&F in repair 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S & F in repair 15mm bore Bib taps, chromium plated cast copper alloy but fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repairs 15 mm dia fancy type stop valves/ angle cock chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S & F in repair 125mm size brass chromium plated shower rose with or without swivel joints including fixing to steel pipe or union fixed complete all as specified and directed.
S&F in repair health faucet with spray jet (hand shower) chromium plated including all fittings fixtures complete all as specified and directed.
S&F in repair brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
S&F in repair two way bib tap / cock 15mm bore, chromium plated, fancy type complete all as specified and directed.
M&L for wash down water closet (pedestal pattern) complete white with plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern incl pedestal pan and trap, and connection to drain (or outgoing pipe) complete all as specified and as directed.
M&L for vitreous china wash basin, white, flat back size 550 x 400mm including 01 Nos cast copper alloy 15mm CP fancy type pillar tap, 01 Nos 32mm waste coupling , one pair of MS bracket, cutting for and pinning in ends of brackets complete all as specified and directed.
Supply and fix PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle complete all as specified and directed.
S&F in repairs PVC connection 15mm dia, 45 Cms long with brass ferrules on both ends fixed complete all as specified and directed.
S & F brass chromium plated tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated complete all as specified and directed.
Supply and Fix PTMT Shelf of weight not less than 300 gms with soap dish (tray) fixed with and including Chromium plated brass screws and wooden / plastic cleats etc., complete all as specified and as directed.
S & F PVC( SWR ) pipes 110mm dia single socketed, in any length with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall or laid in trenches incl taking down existing pipe with fittings complete all as specified and directed.
S & F PVC( SWR ) pipes 75mm dia single socketed , in any length with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall or laid in trenches incl taking down complete all as specified and directed.
S&F in repair PVC (SWR) bends any radius 110mm bore complete all specified and directed.
S&F in repair PVC (SWR) bends with access door any radius 110mm bore complete all specified and directed.
S&F PVC (SWR) junction single (single T) equal or unequal with access door of bore 110mm complete all specified and directed.
S&F PVC(SWR) vent cowl 110mm bore complete all specified and directed.
S&F PVC (SWR) bends any radious 75 mm dia complete all specified and directed.
S&F PVC (SWR) bends with access door any radious 75 mm dia complete all specified and directed.
S&F PVC (SWR) junction single (single T) equal or unequal of bore 75mm complete all specified and directed.
S&F PVC (SWR) junction single (single T) equal or unequal with access door of bore 75mm complete all specified and directed.
S&F in repair PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all specified and directed.
S&F for PVC waste pipe for urinal/WHB with fitting etc 38 mm dia. 60cm long complete all specified and directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., complete all as specified and directed.
M & L for brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for.
Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in Hard/ Dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil
M&L for plain Cement Concrete Type C2, 1:3:6 (using 40 mm graded stone aggregate) in foundation filling, mass concrete and similar works and for MS Pipe fixing.
S&F MS Plain plates, square cut, with riveted, bolted or welded attachment Fe-410-W (Gde-E-250) quality A complete all as specified and as directed.
M&L for Steel work in tubular trusses, purlin, rafter & vertical post including special shaped washer etc using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade st-240 complete all as specified and directed.
M & L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.
M & L pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.
Taking down carefully existing point wiring of any description for (light, fan ,sockets bells etc) complete including fittings such as sunken boxes, switches, sockets, ceiling rose, lamp holders, brackets ,fittings, pendants, fan regulartors etc and making good the disturbed surface of walls, floors etc. all as specified and directed.
Taking down existing sub main wiring /Service wire of any description and size including earth wire, batten, conduits and making good the disturbed surfaces of walls, floors etc.
M & L for providing point wiring with 1.5 sq. mm (nominal area) single core PVC insulated FRLS unsheathed multi-stranded copper conductor cable (maintaining colour code), 1100 volts grade in and including non metalic rigid PVC conduit medium grade with appropriate size with all fittings (ISI Marked) suitable for concealed wiring on stone/brick, masonary walls, roof etc including modular sunken box of adequate size with suitable modular plate cover for mounting modular switches, sockets, regulators, light fittings etc. complete with all fittings and accessories fixed to wall/ ceiling for one light/ fan /bell point controlled by one one way modular switche including one run 1.5 sqmm (nominal area) PVC insulated FRLS unsheathed multi-stranded copper conductor cable green in colour for earth continuity conductor connected to common earth dolly including cutting/running chases, pinning in and making good the disturbed surfaces to match with the existing specification, complete all as specified & directed at site.
All as per Item No.108 above but one 5 Amps 3/5 pin modular socket outlet on independent board complete all as specified and as directed at site.
All as per Item No.108 above but for one 3/5 pin 5/6 Amps modular socket outlet point on same board with other switches complete all as specified and as directed at site.
All as per Item No.108 but for One 3 pin 15 / 16 Amps modular switch socket outlet point on independent board with 2.5 sqmm PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 2.5 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable (green colour) as earth lead complete all as specified and directed at site.
S&F in repair Ceiling rose surface bakelite 65 x 50 mm 2/3 terminals complete all as specified and directed at site.
S&F Modular switch, single pole, one way, 6 Amps one module complete all as specified and as directed.
S&F Modular 6A 3 pin universal socket outlet, 2 module complete all as specified and as directed.
S&F Modular switch, single pole, one way, 16 Amps one module complete all as specified and as directed.
S&F Modular socket outlet 2-in-1, 6/16 Amps, 2 module complete all as specified and as directed.
S&F modular stepped type electronic fan regulator 220 volts, 100Watt complete all as specified and as directed.
S&F in repair modular bell push 6 Amps 1 module complete all as specified and as directed.
S&F in repair 9 W LED bulb of base B22d with color temp 6500K all as specified and directed.
S&F in repair Factory made board distribution in sheet steel enclosure vertical single door with 200 Amps rated bus bar, TPN, 4 ways, 240 Volts suitable for housing MCBs as incomer and SP MCBs as outgoing complete all as specified and as directed.
S&F in repair Sheet metal enclosure MCB distribution board including 200 Amps bus-bar single pole and neutral 240V, 8 Ways, double door including taking down of existing sheet metal enclosure complete all as specified and directed at site.
S&F in repair Sheet metal enclosure MCB distribution board including 200 Amps bus-bar single pole and neutral 240V, 4 Ways, double door including taking down of existing sheet metal enclosure complete all as specified and directed at site.
S&F in repair MCB, Four pole, 240 volts, 63 Amps 10 KA C curve complete all as specified and as directed.
S&F in repair 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 32 AMP, in the MCB DB Complete with connection testing and commissioning.
S&F in repair 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed at site. .
M&L for Submain wiring with two single core PVC (FRLS) insulated flexible copper conductor cable of size 6 Sqmm and one single core PVC (FRLS) insulated unsheathed flexible copper conductor cable green colour of size 6.0 Sqmm as earth lead in and including PVC conduit medium grade/casing caping with all fittings suitable for concealed/surface type and making good the disturbed wall surfaces to match with existing specification all as required at site complete all as specified and directed at site.
S&F 25W energy saving and environmental friendly long life LED building security street light made up of pressure die cast aluminium housing with high power LED, lens & toughened glass, potted driver, IP 66 protection including connection with twin twisted unsheathed PVC copper cable of suitable size complete all as specified and directed.
Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge o the plate not less1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts nuts, check nuts and washers of galvanized iron of steel all as shown in electrical plate No.3 connected to earthing test point incl necessary earth work, excavation PCC 1:3:6 type CI using 20mm graded stone aggregate for earth chamber provn of PCC cover 40 mm thick 1:2:4 mm type B1 funnel with water Pipe, GI pipe, 15mm dia medium grade protection pipe, GI earth lead complete all as specified and directed by the Engr-in-charge.
S&F LUMILINE PLUS 22 W decorative wall mounted LED batten with aluminium housing and integrated electronic diriver connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed at site.
S&F LUMILINE PLUS 10 W decorative wall mounted LED batten with aluminium housing and integrated electronic diriver connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed at site.
S&F Floretine Decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base. complete all as specified and directed at site.
S&F 18W TRIM COSMO surface mounted LED round downlighter with premium diffuser to ensure glare free & even light distribution including necessary connection all as specified and directed at site.
S&F ATHENA 3 (MOON) gate light made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22 base having dimensions of dia 230mm, height 328mm and mounting pole dia 60mm (max) complete all as specified and directed at site.
S&F in repair LED light fittings, 1x10 watts bulk head luminaires etc complete with all accessories and including connecting up with twin core twisted flexible PVC copper conduct cabe of 23/0.0076 from ceiling rose complete all as specified and as directed.
S&F in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amps MCB complete all as specifed and directed at site.
S&F in repair bell ding dong AC single pole 230 volts complete all as specified and as directed at site.
NIKESH ENTERPRISES
MCS ENGINEERING CONSTRUCTIONS
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .