Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹6.8 Laccepted-aoc | ₹6.8 L | accepted-aoc |
Tender Value
₹7.0 L
EMD Value
₹7,000
Closing Date
27 Aug 2026, 3:00 pmClosed
Chief Engineer, Tirupati
Tirupati,
Drilling of bore wells and providing submersible pumps in the premises of Sri Venkateswara Swamy Temple at Ulwe, Navi Mumbai, Maharashtra State.
976200
61/EE-III/TTD/2026-27
OPEN - NCB
Water Supply
TIRUPATHI
5 documents required · 5 mandatory
₹247
₹7,000
9 Sept 2026
12 Aug 2026
12 Aug 2026
Selection of site by means of electronic testing device or any other method to find out the availability of underground water inside the premises for the guaranteed water discharge through the proposed bore well etc., completed. (The rate is excluding GST)
Drilling of borewell 150 mm dia etc., completed (The rate is excluding GST)
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well-casing pipe of 150mm dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per the direction of Engineer in charge.
Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer's design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump.
Submersible Pump 150 mm dia (with Bronze / Stainless steel (CF8M) Impeller) 3.0 HP up to 8 stages.
Manufacture, supply, & delivery of HDPE pipes 6.0 Kg/Sqcm (PE-100 Grade) confirming to IS 14333-2000 for using under Ground Drainage and Sewerage systems including transportation to anywhere in A.P, excluding taxes and specials etc., complete.(supply up to 90 mm dia in coil & above 90 mm dia straight length in 6 m or 12 m)-OD 63mm
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU.
Supplying & erecting automatic control panel for 3 Phase , 415 volt, A.C, Submersible/centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc.
Providing and laying in trenches 40 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
Providing and laying in trenches 25 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
Providing and laying in trenches 15 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
Providing and fixing screw down for 40 mm dia. Wheeled stop tap of brass including necessary sockets/union nut complete.
Providing and fixing 25 mm dia. Screw down bib / stop tap of brass including necessary socket union nut complete.
Providing and fixing 15 mm dia. Screw down bib / stop tap of brass including necessary socket union nut complete.
Engaging of labour to attend miscellaneous works
Plumber With Tools - Skilled
Mazdoor - Unskilled Heavy Male
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
BOQ-61.xlsx
TENDER_DOCUMENT • 0.05 MB
NIT-61.doc
TENDER_DOCUMENT • 0.50 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .