Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.1 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹9.3 L+₹18,569.36 (2.04%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹9.4 L+₹32,581.20 (3.59%)Rejected-Finance | L3 | Rejected-Finance L3 | |
| 4 | L4₹9.4 L+₹32,988.60 (3.63%)Rejected-Finance | L4 | Rejected-Finance L4 | |
| 5 | L5₹9.4 L+₹34,818 (3.83%)Rejected-Finance | L5 | Rejected-Finance L5 |
Tender Value
₹9.5 L
EMD Value
₹19,000
Closing Date
20 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I AF Kumbhirgram
AGE I AF Kumbhirgram Military Engineer Services PO Kumbhirgram Assam Pin 788109 Tele 03841282376
WELCOME MAINTENANCE AND MISC REPAIR TO OFFICERS ACCN AT AFS KUMBHIRGRAM
2022_MES_524585_2
8423/2022-23/E8
Open Tender
Civil Works
Item Rate
180 days
AF STATION KUMBHIRGRAM
As per NIT
8 documents required · 8 mandatory
₹500
Yes
AGE I AF Kumbhirgram
₹19,000
Yes
28 Jun 2022
11 Jun 2022
22 Jun 2022
11 Jun 2022
20 Jun 2022
13 Jun 2022
Amount
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exceeding 1.50 Sq.m each complete all as specified and directed.
Taking down shutter of any description exc 1 sqm but not exceeding 2 sqm each and removing away all as directed.
Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Demolition of brick/stone massonry work built in cement mortar as in wall including all quoins, arches, pillars etc complete all as specified and directed.
Dismantling floor, hearth and wall tiling including cement mortar bedding (but excluding backing), removing rubbish off the premises complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed.
Taking up or down 15 mm bore GI tubing and connections including cleaning for re-fixing or removal to store complete all as directed.
Taking up or down 20 mm bore GI tubing and connections including cleaning for re-fixing or removal to store complete all as directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones, glazed with putty complete all as specified and directed.
Supply and fix 4mm thick figured glass, pin head type and glazing with oil putty and glazing pins in squares not exceeding 0.50 Sq.m in each pane complete all as specified and directed.
Supply and fix 3mm thick sheet glass, ordinary quality, and glazing with oil putty or secured with wooden beads, in squares not exceeding 0.50 Sq.m in each pane complete all as specified and directed.
Supply and fix mild steel butt hinges, medium weight, cold rolled 100mm size complete all as specified and directed
Supply and fix Aluminium anodized barrel tower bolts of extruded section, 200 mm long all as specified and directed.
Supply and fix Aluminium handles, cast type, anodized, 150mm size all as specified and directed.
S&F PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tube for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stills and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ scaled to the stiles and rails with suitable PVC Sheet beading and jointed together with solvent cement as per drawings and specifications as catered in SSR Part – II 2004 complete all as specified and directed.
S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, hangers 6mm dia GI (upto 1200mm length) adjustable level fixed to roof by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long with and including 4mm thick Non asbestos cement plain building board, laid in GI frame work (size of grid 605x605mm) complete all as specified and directed.
M&L for Non Asbestos fibre cement building boards 4 mm thick fixed to timber frame work with screws as in ceiling complete all as specified and as directed.
M&L for 20 mm thick Granite (of any type) work (table rubbed and polished), bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15 mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.
M&L for RCC (1:2:4) type B1 using 20 mm graded crushed stone aggregate as in precast cover slab etc., set in cement mortar 1:4 complete all as specified and directed.
M&L for TMT bars 10 mm dia & over, cut to length, bent to shape as required including cranking, bending and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and directed.
M&L for preparation of old decorated plastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc including cornices and pilasters etc and applying one coat of white wash complete all as specified and directed.
All as per serial item No 26 above but in ceiling
M&L for preparation of old decorated plastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc including cornices and pilasters etc and applying one coat of oil emulsion distemper complete all as specified and directed.
M&L for complete removal of existing treatment on walls including brooming down , applying two coats of oil emulsion distemper over and including one coat of cement primer and 1mm thick wall care putty complete all as specified and directed .
M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
S&F in repairs galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
S&F in repairs 18/19mm thick particle board, medium density, flat pressed, three layer type with BWR type adhesive, fixed with screws to timber frame work in cupboard partition complete all as specified and directed.
S&F in repair 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
M&L for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 5 mm thick in cement mortar (1:3) as in ceiling, finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) including mixing of WPC as per manufacturers instructions complete all as specified and directed. Note:-Supply only WPC shall be measured and paid separately.
Supply only integral water proofing compound ISI marked.
M&L for preparation of newely plastered surface of wall and applying two of oil bound distemper over one coat of chalk whiting complete all as specified and directed .
M&L for preparation of newely plastered surface and applying two coats of white wash on ceiling complete all as specified and directed.
Fixing only old serviceable GI tubing 15 mm bore, medium grade with all new fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.
Fixing only old serviceable GI tubing 20 mm bore, medium grade with all new fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.
S&F GI tubing 15 mm bore, medium grade with all fittings such as bends, elbows, nipples, sockets, tees, unions, short pieces etc. and fixed to walls and ceilings or laid in floors complete all as specified and directed.
S&F GI tubing 20 mm bore, medium grade with all fittings such as bends, elbows, nipples, sockets, tees, unions, short pieces etc. and fixed to walls and ceilings or laid in floors complete all as specified and directed.
S&F in repairs bib taps 15 mm dia cast copper alloy chromium plated, fancy type with crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as directed.
S&F in repair 15mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.
S&F in repair wall mixer telephone shower arrangement only with crutch( with bush & piston divertor fitting) with aerator complete all as specified and directed. Make : Essco(Jaquar) MQT-517 or equivalent make of Parryware/ CERA/ Prayag.
S&F in repair 15 mm bore PTMT bib taps any colour high pressure screwed down for iron pipe and fixed (minimum weight 90 gram) complete all as specified and directed.
S&F in repair overhead shower 125mm dia round shape single flow (ABS body chrome plated with gray face plate) with rubit cleaning system complete all as specified and directed. Make : Essco(Jaquar) EOS-542A or equivalent make of Parryware/ CERA/ Prayag.
S&F in repairs stop valve 15 mm dia cast copper alloy chromium plated with crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as directed.
S&F in repairs stop valve concealed / angle valve 15 mm dia cast copper alloy chromium plated, fancy type with crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as directed.
S&F in repair Towel rail 600mm long chromium plated fixed with and including chromium plated brass screws and wooden /plastic cleats complete all as specified and directed .
S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed .
S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed .
S&F in repairs soap disc copper alloy chromium plated fixed to plug with chromium plated brass screw complete all as directed.
S&F in repair glass shelfassembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F in repair PVC low level flushing cistern, pastel coloured, 10 ltrs capacity, valveless, syphonic action type including all fittings and flush pipe, PVC connection pipe all as specified and directed.
M&L for 25 mm thick plain cement concrete (1:2:4) type B0 using 12.5 mm graded stone aggregate as in sub base of floor complete all as specified and directed.
M&L for non skid ceramic joint free coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 15 mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.
S&F for glazed ceramic coloured/printed tiles of size 300x200x6 to 7 mm thick as in vertical surfaces such as skirting, dados over and including 10 mm thick screed in cement mortar (1: 4) complete all as specified and directed.
S&F 10mm thick vitrified ceramic tiles light shade coloured (Square or rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.
S&F 10mm thick vitrified ceramic tiles light shade coloured (Square or rectangular) polished, area of each tiles not exceeding 0.36 Sqm in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick screed in cement mortar (1:4) complete all as specified and directed.
Dismantling timber fillets, posts, rails, rafters, purlins, etc. under 40sqcm in section complete all as specified and directed.
S&F 2nd class hard wood plain fillets bullnosed splayed, chamfered or rounded on one edge or face exceeding 6sqm and not exceeding 13sqm secured with nails complete all as specified and directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing and making good, cutting not exc 10cm girth complete all as specified and directed.
S&F aluminium ( die cast) body door closer hydraulically regulated regulated, designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg , complete all as specified and directed.
S&F 110mm dia PVC (SWR) pipes, Type 'A' single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.
S&F 110 mm dia PVC (SWR) branch piece, single (single Y) eqial or unequal complete all as specified and directed.
S&F 110 mm dia PVC (SWR) bends of any radius complete all as specified and directed.
S&F 110 mm dia PVC (SWR) junction single, (single T) equal or unequal complete all as specified and directed.
S&F 75mm dia PVC (SWR) pipes, Type 'A' single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.
S&F 75 mm dia PVC (SWR) branch piece, single (single Y) eqial or unequal complete all as specified and directed.
S&F 75 mm dia PVC (SWR) bends of any radius complete all as specified and directed.
S&F 75 mm dia PVC (SWR) junction single, (single T) equal or unequal complete all as specified and directed.
S&F in repair plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S&F in repair vitreous china wash hand basin white, flat back of size 580x450mm including brackets, waste coupling, PVC waste pipe complete all as specified and directed.
S&F in repair vitreous china wash down water closet (EWC) pastel pattern, white including 'P' trap and seat cover complete all as specified and directed.
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laoratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan to any radius built in cement mortar (1:4) as in half brick thick wall complete all as specified and directed.
M&L for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and directed.
S&F in repair curtain rails of anodized aluminium with fixing brackets, stops, rollers etc. complete all as specified and directed.
M/s Nishi Kumar Das
M/S P K ROY AND SONS
M/S ANITA ROY and SONS
Niranjan Roy
M/S PIJUSH BHATTACHARJEE
Bhuiya Construction
Anup Kumar Paul Choudhury
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .