REPAIR / MAINT INCLUDING DENTING, PAINTING, POLISHING AND RE-CANNING OF VARIOUS STEEL AND WOODEN FURNITURE AT AF STATION UNDER GE (AF) JAMNAGAR NO.2

Amount

Conversion of Charpoy GI Pipe Nylon Newar to Charpoy GI Pipe Plywood top by removing nylon Newar and S&F of 12mm thick ply, ISI mark of size 1980mm X 900mm by fixing with 10Nos nut and bolt of suitable size with GI washer along with provision of 25mm x 3mm Flat iron stiffner 02 Nos at the ends to welded with the top of long rail as directed by GE.The Flat iron shall be painted with two coats of synthetic enamel black paint over a coat of red (FD-220)

Removing of damaged/broken long rail from charpoy GI pipe and S&F new long rail made out of GI pipe 32mm bore (ISI marked) medium grade including threading both sides all as specified in drg & directed by Engr-in-charge.

Removing of old damaged/broken long rail from charpoy and making of short rail from u/s long rail retreived from ser No.1.01 above incl threading & fixing in charpoy GI pipe all as specified in drg & directed by Engr-in-charge.

Removing of old damaged/broken short rail from charpoy and making leg from u/s short rail retreived from ser No.1.02 above incl threading, S&F 3mm thick flat iron plate in bottom to be welded with legs & fixing in charpoy GI pipe all as specified in drg & directed by Engr-in-charge.

Removing old broken/damaged GI elbow and S&F new GI elbow 3way 32mm bore (ISI marked) to charpoy GI pipe all as specified in drg & directed by Engr-in-charge.

Removing old and unserviceable parts/components of CHARPOY IP HARD TOP"and S&F in replacement plywood BWR grade ISI marked 12mm thick to the top of the charpoy with suitable nuts,bolts & washers complete all as specified in drawing and directed by Engr-in-charge. Drg No.(FD/MAP-II/01)

M&L for re-canning of "CHAIR VERANDAH" using 4 mm wide half round plastic cane of pale cream / white colour of superior quality in mat design including removal of old plastic cane and including preparation of old painted surface of chair frame and applying two coats white synthetic enamel paint all as specified and shown in Drg and as directed by Engr-in-Charge. (Drg No FD - 256)

Supply and fix in repair hard rubber shoe to chair verandah / chair verandah steel.

Removing old and unserviceable parts / components of “ CHAIR TUBULAR OFFICE STEEL WITH / WITHOUT ARMS” and S&F new parts / components of same size, existing pattern and with appropriate welding or screw, painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-75 (M)

Second class HW seat frame including black enamel painting and woven with 2.00 to 2.5 mm wide white / pale cream plastic cane as per GODREJ pattern complete.

Second class HW back frame including black enamel painting and woven with 2.00 to 2.5 mm wide white / pale cream plastic cane as per GODREJ pattern complete..

Second class HW hand rest including black enamel painting.

Rubber shoe with suitable screws.

Removing following old and unserviceable parts / components of “TABLE OFFICE CLERK STEEL” and S&F new parts / components of same size, existing pattern with beading, screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-1004)

Removing old u/s tops from table office clk steel and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Removing of unserviceable/broken/Damaged/Rusted drawers from existing table office clk steel and S&F new drawers made out 1mm thick MS sheet all as specified in drg & directed by Eng-in-charge.

M&L for removal of existing unserviceable lock of any description in any position, S& F new lock (brass) 6levers (Make:Voltas/Bajarang/lico) with duplicate key including fixing with suitable machine screws complete all as specified and directed by Engineer-in-charge.

Replacement of rubber shoe with S &F new hard rubber shoe of superior quality completed as approved and all as shown on drawings.

Removing following old and unserviceable parts / components of “TABLE OFFICE OFFICER STEEL” and S&F new parts / components of same size, existing pattern with beading, screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-1003)

All as per item No 5.01 above but top of Table Office Offr steel

All as per item No 5.02 above but drawers of Table Office Offr steel

All as per item No 5.03 above but lock of Table Office Offr steel

All as per item No 5.04 above but rubber shoe of Table Office Offr steel

Removing following old and unserviceable parts / components of “VARIOUS TYPES OF CHAIR REVOLVING” and S&F new parts / components of same size, existing pattern and same material, with beading, screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No -TP/ Godrej/Durian/HOF & etc )

Removing the existing old foam & tapestry of seat and S &F new 40 density foam cushion 75 mm with tapestry as approved By GE .

All as per item No 7.01 above but Back of chair revolving.

All as per item No 7.01 above but Arm of chair revolving.

Removing the existing U/S casteor wheel and S&F new caster wheel.

Replacement of lever system (hydraulic) for adjustment of height including all necessary fitting etc.

Replacement of complete plate base stand assembly including all necessary fitting etc.

Removing following old and unserviceable parts / components of “CHAIR WRITING” and S&F new parts / components of same size, existing pattern and same material, with screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No -FD/E6/MAP/12 & TP )

Removing the existing old foam & tapestry of seat and S &F new 50 density foam cushion 50 mm with tapestry as approved By GE .

All as per item No 8.01 above but Back of chair writing.

Arm rest made up of polyurethane with 75-85 shore 'A' hardness

Removing the existing rubber stopper and S&F new rubber stopper.

Removing following old and unserviceable parts / components of “CHAIR SCHOOL WITH HAND BOARD” and S&F new parts / components of same size, existing pattern and same material, with beading, screw, nut, bolt, & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD / E6 / MAP / 05)

S & F in repair PVC Seat & back one piece of chair school with hard baord. (Drg No.FD/ E6/ MAP/ 05) Make:- Blowplast / Supreme / Cello / National, Amko)

Removing old u/s tops from chair school hand board and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Hard rubber shoe.

Removing following old and unserviceable parts / components of “TABLE 3X3 STEEL” and S&F new parts / components of same size, existing pattern and same material, with beading, screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-1009)

Removing old u/s tops from Table 3X3 steel and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Leg fabricated with 25 mm size steel square tube with 1.6 mm wall thickness.

Removing following old and unserviceable parts / components of “RACK SHOE STEEL” and S&F new parts / components of same size, existing pattern and same material, with beading, screw, nut, bolt, & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/E6/MAP/ 02/R)

Creedal (selves) made of 25 mm conduit pipe & 3 mm MS wire mesh

Removing following old and unserviceable parts / components of “TABLE COMPUTER” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw, nut, bolt etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/E6/MAP/03)

Removing old u/s tops from Table computer and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Drawer made out of 18 mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around as per manufacturer's instructions and other side French polishing with 02 Nos Telescopic Channel of best quality as approved by Engr-In-Charge.

Pull out tray for mouse made all as per items ser No 12.02

Pull out tray for Key Board made all as per items ser No 12.02.

Removing following old and unserviceable parts / components of “TABLE BED SIDE ” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/E6/MAP/15 (R) )

Back of 6 mm thick commercial face plywood.

side (right & left) made out of 18 mm thick pre-laminated particle board exterior grade(ISI marked) PVC edging fixed to frame 25mm projection on all three sides all as specified in drg as directed by Engr-in-charge.

Complete drawer made out of 12 mm thick plywood of size and specification as per drawing.

M&L for spot Welding of steel items of broken joints etc not exceeding 2.5 cm in length and thickness of weld 6 mm, including scraping preparing surface of welded portion by grinding and buffing to match with existing.

Removing old and unserviceable parts / components of “ALMIRAH LARGE / MED / SMALL STEEL ”and S&F new parts / components of same size, existing pattern and same material, with appropriate welding or screw & painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-1031 & 1032)

MS lock 6 levers best quality with brass livers & duplicate key (Make:- Harrison/Samrat/Lico or equivalent as approved by the GE)

Mild steel chromium plated handle 125 mm size . Make : link/Lico/MK/Man

Three way locking assembly with iron plate and two rods 10 mm dia and lock cover as per drawing.

Leg made out of 1.00 mm thick mild steel plane black sheet size as per drawing including painting with two coats synthetic enamel paint over one coat of red oxide primer with spray machine.

Removing the existing U/S plywood from BED HARD STEEL & supply and fix 12 mm thick BWR plywood, ISI marked of same size, existing pattern with beading, screw etc complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD / E6/ Map / 08 (R)

Removing the existing U/S pre-laminted partical board from head rest of Bed Hard Steel, and S & F 18/19 mm pre laminated patical board of same size, existing pattern with beading, screw etc complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD / E6/ MAP/08 (R))

Removing the existing U/S pre-laminted partical board from foot rest of Bed Hard Steel, and S & F 18/19 mm pre- laminated patical board of same size, existing pattern with beading, screw etc complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD / E6/ MAP / 08 (R))

Removing following old and unserviceable parts / components of “TEAPOY VARANDAH” and S&F new parts / components of same size, existing pattern and same material, with beading, screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-255)

Removing old u/s tops from teapoy verandah and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Leg fabricated with 20 mm dia mild steel conduit pipe of wall thickness 1.6 mm including bending in 'U' shape.

Removing following old and unserviceable parts / components of “BED PLYWOOD TOP” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD 246, 247)

Head rest complete of size and specification as per drawing.

Foot rest complete of size and specification as per drawing.

Plywood top with 12 mm thick BWR commercial .

Long rail of first class hard wood (teak wood) of size and specification as per drawing.

Short rail of first class hard wood (teak wood) of size and specification as per drawing.

Both side veneered of Head Rest of size and specification as per drawing.

Both side veneered of Foot Rest of size and specification as per drawing.

Removing following old and unserviceable parts / components of “CHAIR DINING with cushioned ” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/MAP-II/04)

Front leg made out of teakwood of size and specification as per drawing.

Rear leg made out of teakwood of size and specification as per drawing.

Bottom stiffener long first class hard wood (teak wood) of size and specification as per drawing.

Bottom stiffener short first class hard wood (teak wood) of size and specification as per drawing.

Short rail and made of first class hard wood (teak wood) of size and specification as per drawing.

long rail made of one piece of first class hard wood (teak wood) of size and specification as per drawing.

Complete seat made out of 75 mm thick 32 density foam with 12 mm thick plywood base, upholstered with tapestry as directed by Engineer-in-charge.

Removing following old and unserviceable parts / components of “CHAIR EASY” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-229)

Front / Rear legs made of first class hard wood (teak wood) of size and specification as per drawing.

Arm rest made of first class hard wood (teak wood) of size and specification as per drawing.

Seat Front / Rear / side rail made of first class hard wood (teak wood) of size and specification as per drawing.

Back Upper / bottom rail made of first class hard wood (teak wood) of size and specification as per drawing.

Removing following old and unserviceable parts / components of “CHAIR DINING ” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge.(Drg No FD-279, FD/MAP-II/05)

Front legs made of first class hard wood (teak wood) of size and specification as per drawing.

Rear legs made of first class hard wood (teak wood) of size and specification as per drawing.

long / short rail of seat made of first class hard wood (teak wood) of size and specification as per drawing.

Stiffener of back made of first class hard wood (teak wood) of size and specification as per drawing.

Short & long stiffener of bottom made of first class hard wood (teak wood) of size and specification as per drawing.

Complete seat made out of 4mm thick PVC with holes and screwed with frame as per drawing directed by Engineer-in-charge (FD/MAP-II/05).

Removing following old and unserviceable parts / components of “CHAIR WRITING ” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-250, 280, 285)

Front legs made of first class hard wood (teak wood) of size and specification as per drawing.

Rear legs made of first class hard wood (teak wood) of size and specification as per drawing.

Front / Rear / Side rail of seat made of first class hard wood (Teak wood) of size and specification as per drawing.

Stiffener of Back made of first class hard wood (Teak wood) of size and specification as per drawing.

Short / long stiffener of bottom made of first class hard wood (Teak wood) of size and specification as per drawing.

BIN SOILED LINEN SMALL/LARGE : (FD244M) M&L for dismantling underviceable parts Bin Soiled Line Small / large and S&F the following parts of Bin Soiled Linen Small as specified in drawing or as directed by Engr-in-Charge:-

Leg with 1st Class Hard wood

Stainless steel wire mesh for side of Bin Soiled Linen of size as specified in drawing with reak wood beading 15 x 15mm

Front with 6mm thick commercial plywood BWR grade with teak wood beading 25 xmm. (Make : green ply/Archid ply/Century ply)

Back with 6mm thick commercial ply (Make : green ply/Archid ply/Century ply)

Front with 6mm thick commercial ply (Make : green ply/Archid ply/Century ply)

Bottom with 12mm thick commercial ply (Make : green ply/Archid ply/Century ply)

Removing following old and unserviceable parts / components of “PEG TABLE” and S&F new parts / components of same size, existing pattern with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-236 & 277)

Removing old u/s tops from peg table and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Legs of first class hard wood (teak wood) of size and specification as per drawing.

Short rail of first class hard wood (teak wood) of size and specification as per drawing.

Long rail of first class hard wood (teak wood) of size and specification as per drawing.

Removing following old and unserviceable parts / components of “REPAIRS TO HAT STAND WITH MIRROR” and S & F new parts / components of same size, existing pattern and same material, with beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-233)

5 mm thick looking mirror of size and specification as per drawing.

3 mm thick Veneered plywood of size and specification as per drawing.

9 mm thick Back Plywood of size and specification as per drawing.

Aluminium Peg of size and specification as per drawing.

Repairs to Sofa set 5 Seater by Replacing of unsv seat / back cushion foam with tapestry cloth/rexin/leatherite and other aceesories what so ever required as per existing pattern/structure and sample approved by Engr - in - Charge. (Drg No. HOF/Godrej/Durian.

Removing following old and unserviceable parts / components of “SOFA 4 SEATER & SOFA 5 SEATER” and S & F new parts / components of same size, existing pattern and same material, with beading, screw,etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No - FD - 281 / 258 / 373)

Arms made out of teakwood of size and specification as per drawing.

Front leg made out of teakwood of size and specification as per drawing.

Rear leg made out of teakwood of size and specification as per drawing.

Batten for seat and back made out of teak wood of size and specification as per drawing.

M&L for replacement of old u/s seat/back cushions, S&F new foam cushion of size 21''x20''x100mm thick, 32 density (Make: Sleepwell/kurlon) duly covered with tapestry cloth of approved quality/colou/texture (Cost of tapestry shall not be less than Rs.380/- per metre) all as specified and directed.

M&L for replacement of old u/s tapestry cloth of seat/back cushion, S&F new tapestry cloth of approved quality/colou/texture (Cost of tapestry shall not be less than Rs.380/- per metre) all as specified and directed.

Removing following old and unserviceable parts / components of “TABLE DINING 6 / 8 PERSON ” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. Drg No FD-239 & 273)

Removing old u/s tops from Table dining and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Top for TABLE DINING 8 PERSON made all as per items ser No 13.01

Legs made of first class hard wood (teak wood) of size and specification as per drawing.

Short rail made of first class hard wood (teak wood) of size and specification as per drawing.

Long rail for TABLE DINING 6 PERSON made of first class hard wood (teak wood) of size and specification as per drawing.

Long rail for TABLE DINING 8 PERSON made of first class hard wood (teak wood) of size and specification as per drawing.

Removing following old and unserviceable parts / components of “Table DRESSING GENTS WITH MIRROR” and S&F new parts / components of same size, existing pattern same texture to match with existing, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD 230)

5 mm thick Looking Mirror with 06 mm thick plywood at the back with complete frame of hard wood for mirror and specification as per drawing.

Lower wooden box made out of 18 mm thick pre-laminated particle board exterior grade(ISI marked) and one side French polishing, 6 mm thick back plywood & knob 40mm dia complete all as specified in drg as directed by Engr-in-charge.

Removing following old and unserviceable parts / components of “TEAPOY WOODEN” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-232 & 278)

Removing old u/s tops from Teapoy wooden and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Legs of first class hard wood (teak wood) of size and specification as per drawing.

Short rail of first class hard wood (teak wood) of size and specification as per drawing.

Long rail of first class hard wood (teak wood) of size and specification as per drawing.

Removing following old and unserviceable parts / components of “TABLE 3' x 2' WITH & WITHOUT DRAWER” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-41, 224, 283)

Removing of old u/s top of table 3 x 2 and S&F new top made out of 18mm thick pre-laminated particle board exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around all as specified in drg & directed by Engr-in-charge.

Leg made of first class hard wood (teak wood) of size and specification as per drawing.

Long rail made of first class hard wood (teak wood) of size and specification as per drawing.

Short rail made of first class hard wood (teak wood) of size and specification as per drawing.

Long bottom stiffeners made of first class hard wood (teak wood) of size and specification as per drawing.

Short bottom stiffeners made of first class hard wood (teak wood) of size and specification as per drawing.

Complete drawer made out of 12 mm thick plywood of size and specification as per drawing.

Removing following old and unserviceable parts / components of “TABLE 3' x 3' WOODEN” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-88 M, 291)

Removing of old u/s top of table 3 x 3 and S&F new top made out of 18mm thick pre-laminated particle board exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around all as specified in drg & directed by Engr-in-charge.

Leg made of first class hard wood (teak wood) of size and specification as per drawing.

Long rail made of first class hard wood (teak wood) of size and specification as per drawing.

Short rail made of first class hard wood (teak wood) of size and specification as per drawing.

Long bottom stiffeners made of first class hard wood (teak wood) of size and specification as per drawing.

Short bottom stiffeners made of first class hard wood (teak wood) of size and specification as per drawing.

Removing following old and unserviceable parts / components of “TABLE WRITING (STUDY) ” and S & F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-33 & 275, 249)

Top made out of 18 mm thick pre-laminated plywood board with exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around all as specified in drg & directed by Engr-in-charge.

Legs made of first class hard wood (teak wood) of size and specification as per drawing.

Complete drawer made out of 12 mm thick plywood of size and specification as per drawing.

Shutters made out of 18 mm thick pre-laminated plywood board with exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around all as specified in drg & directed by Engr-in-charge.

Removing following old and unserviceable parts / components of “TABLE DRESSING LADIES” and S & F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD - 251)

Looking Mirror of approved quality with back of 06 mm plywood and frame of size and specification as per drawing.

Lower wooden box with drawer made out of 18 mm thick pre-laminated plywood board with exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around, 6 mm thick back plywood, 4 mm thick sliding glass, Aluminium channel etc complete all as per drawing.

S & F wooden bracket made of first class hard wood (Teak wood) fixing legs to long and short rail veries type of woodend table(Table dining, table writing, Table 3x2, Bed plywood top) fixed with 2 Nos screw and duly polishing to match with existing complete as direction by Engr-in-charg.

M&L for Removing the existing worn-out cane and Recanning of furniture articles except chair verandah with new standard 2 mm wide plastic cane of semi circular type with border of 4 mm wide plastic cane all as specified and as directed by Engr-In-Charge.

Repairs to Recliner by replacing of unsv seat / back cushion foam with tapestry cloth/rexin/leatherite and other aceesories what so ever required as per existing pattern/structure and sample approved by Engr - in - Charge. (Drg No.Stellar,Godrej,Durian).

M&L for preparation of old polished surface of following wooden furniture article by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of French polish / clear Varnish as directed by Engr-in-Charge :-

Bed plywood (FD-246 & 247)

Chair dining (FD- 279 & FD/MAP-II/05)

Chair Dining (FD/MAP-II/04)

Chair dining long back (FD-357 )

Chair easy (FD-229)

Chair writing (FD 250 & 280)

Hat stand with mirror (FD-233 & 362)

Peg table (FD- 236 & 277)

Sofa set 5 seater (FD-258, 281 & 373)

Sofa set 4 seater (FD-258, 281 & 373)

Table dining for 6 persons (Drg No - FD 239, 273)

Table dining for 8 persons (Drg No - FD 239, 273)

Table writing (Drg No - FD 249,275)

Table centre (Drg No - FD-274)

Table dressing gents with mirror (Drg No - FD 238, FD/E6/MAP/16)

Table dressing ladies with mirror (Drg No - FD 378,251 FD/MAP-II/07 )

Teapoy (Drg No - FD-232,278)

Table 900 x 600 x 760 w/o drawer (Drg No - FD 223,224,283)

M & L for Preparation of old painted surfaces of the following steel furniture article including removal of dent etc to get the surfaces smooth by applying of putty wherever necessary, and Painting with one coat of synthetic enamel paint with spray gun as per existing colour and all as specified and directed by Engr-In-Charge.

Almirah med steel (Drg No - FD 243 /1032)

Almirah large steel (Drg No - FD 67/1031)

Book case steel 1675 x 840 x 305 (Drg No - FD-1028)

Book Shelf Open Small Steel (Drg No - FD-69 M)

Chair Writing (Drg No - FD/E6/MAP/12)

Rack 6 tier steel (Drg No - FD-1038)

Rack Shoe Steel (Drg No - FD E6 MAP 02)

Table office officers steel (Drg No - FD 84 M,1003)

Table office clerk steel (Drg No - FD 84 M,1004)

Table 900 x 600 x 760 (Drg No - FD 1007)

Table with drawer steel frame 900 x 600 x 760 mm (Drg No - FD 1008)

Table 900 x 900 x 760 Steel (Drg No - FD-1009)

Teapoy verandah (Drg No - FD 35 / 255 / 383)

Bed hard steel (Drg No - FD / E6 / MAP / 8 (R))

Charpoy IP with hard top (Drg No - FD / MAP- II /01)

Chair School Hand Board (Drg No FD / E6 / MAP / 05)

Locker Bed Side” (Drg No / FD - 1029)

Chair varandah Steel (FD- 256)

motwani and associate

S t modi

M/S Super Steel Works