Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.7 LAdmitted-Finance | ₹4.7 L | L1 | Admitted-Finance |
| 2 | L2₹4.9 L+₹16,931.80 (3.57%)Admitted-Finance | ₹4.9 L+₹16,931.80 (3.57%) | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | RAJARSHEE DEY L2 | GULANUR HUSSAIN CHOUDHURY L1 |
|---|---|---|---|---|---|
| 1.00 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.
(Windows) | 122.4 | kg | 120 ₹14,688 Lowest | 150 ₹18,360 |
| 2.00 | 6 mm cement plaster of mix :
1:3 (1 cement: 3 fine sand) | 22.6 | sqm | 140 ₹3,164 Lowest | 300 ₹6,780 |
| 3.00 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters
9.20.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | 9.5 | sqm | 3,000 ₹28,500 Lowest | 3,000 ₹28,500 Lowest |
| 4.00 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | 22.6 | sqm | 140 ₹3,164 | 100 ₹2,260 Lowest |
| 5.00 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | 61 | sqm | 10 ₹610 Lowest | 10 ₹610 Lowest |
| 6.00 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).
Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
(W/R t- IV) | 272.88 | kg | 450 ₹1,22,796 Lowest | 500 ₹1,36,440 |
| 7.00 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) | 11.25 | sqm | 1,100 ₹12,375 Lowest | 1,500 ₹16,875 |
| 8.00 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall
18.7.1 15 mm nominal outer dia. Pipes. | 200 | rm | 400 ₹80,000 | 150 ₹30,000 Lowest |
| 9.00 | 18.7.2 25 mm nominal dia | 32 | rm | 500 ₹16,000 | 300 ₹9,600 Lowest |
| 10.00 | Providing and fixing brass bib cock / stop cock of approved quality :
18.49.1 15 mm nominal bore | 3 | nos | 1,100 ₹3,300 | 700 ₹2,100 Lowest |
Tender Value
₹4.8 L
EMD Value
₹9,682
Closing Date
26 May 2026, 11:00 amClosed
EXECUTIVE ENGINEER CIVIL I/C
ENGINEERING SECTION, ASSAM UNIVERSITY SILCHAR
Repairing work in Type II quarter no. 3 (Simul Das), type IV no. 16(Pawan kr. Pal), including kitchen, toilet floor repairing and tiling, Aluminium wordrobe doors, toilet pipes and fittings, flush doors, painting etc. at Assam University,Silchar
2026_AUS_909313_1
AU/ENGG/MAINT/CIVIL/34/2022
Open Tender
Civil Works
Works
40 days
ASSAM UNIVERSITY SILCHAR
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
Assam University Silchar
₹9,682
29 May 2026
19 May 2026
27 May 2026
19 May 2026
26 May 2026
19 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.
(Windows) | 122.4 | kg | 1 | ₹122.4 |
| 2 | 6 mm cement plaster of mix :
1:3 (1 cement: 3 fine sand) | 22.6 | sqm | 1 | ₹22.6 |
| 3 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters
9.20.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | 9.5 | sqm | 1 | ₹9.5 |
| 4 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | 22.6 | sqm | 1 | ₹22.6 |
| 5 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | 61 | sqm | 1 | ₹61 |
| 6 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).
Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
(W/R t- IV) | 272.88 | kg | 1 | ₹272.88 |
| 7 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) | 11.25 | sqm | 1 | ₹11.25 |
| 8 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall
18.7.1 15 mm nominal outer dia. Pipes. | 200 | rm | 1 | ₹200 |
| 9 | 18.7.2 25 mm nominal dia | 32 | rm | 1 | ₹32 |
| 10 | Providing and fixing brass bib cock / stop cock of approved quality :
18.49.1 15 mm nominal bore | 3 | nos | 1 | ₹3 |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.42 MB
BOQ_955704.xls
BOQ • 0.40 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .