Addition/Improvement to Shivalik Guest House, Ambala Cantt.

Amount

Earth work in excavation in trenches n.exc. 1.5 M wide and 1.5M deep and getting out, returning filling in, including spreading & leveling in layers all as specified in MES SSR 2020.

M/L PCC bed 1:5:10 in fillings & Mass concrete all as specified in MES SSR 2020.

M/L RCC work 1:1½:3 for slabs supported on walls, columns , roofs, landing, balconies, canopies deck slabs and in shelves and the like all as specified in MES SSR, 2020. Note : Only OPC cement will be used for all RCC Works.

M/L RCC work 1:1½ :3 for foundation including raft footing foundation beams plinths beams bases for columns basement slabs under reamed piles and mass concrete and the like all as specified in MES SSR, 2020. Note : Only OPC cement will be used for all RCC Works.

M/L Brickwork in C. Mortar 1:4 Straight or curved on plan exe. 6 m mean radius with sub class ‘A’ bricks all as specified in MES SSR 2020

Ditto, but brick work with electric Kiln brick with fair and regular groove in C:M 1:4 all as specified in MES SSR 2020.

Ditto, brickwork with fly ash brick straight or curved on plan exe. 6m mean radius with designation 75 bricks all as specified in MES SSR 2020.

M/L sand filling under floors including watering & well ramming all as specified in MES SSR,2020

M/L screed 15-20 mm thick in C. mortar 1:4 for laying of marble/tiles all as sp. in MES SSR 2020.

S/F Ist class hardwood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified in MES SSR, 2020.

S/F of 12 mm thick toughened glass door complete with handle, L-connector, D-seal, rubber etc complete all as specified.

S/F of Dorma ES 200 automatic sensor (for opening and closeing door) complete all as specified.

Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of Foundation and Plinth Beams and similar work; vertical or to batter fair finished surface all as sp. in MES SSR 2020.

Use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, Columns, beams, landings and similar work, not exceeding 200mm thick (Horizontal or sloping)fair finished surface all as sp. in MES SSR 2020.

S/F Mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all specified in MES SSR, 2020.

M/L PCC floor in cement concrete 1:2:4 fair finished even and smooth without using extra cement (flooring 40mm thick) all as specified in MES SSR 2020.

M/L PC plaster 12 mm thick in cement mortar 1:4, fair finishes over and without using extra cement all as specified in MES SSR, 2020.

M/L Dummy plaster in C:M then making Khaprail design with cement Mortar 1:3 slope roof all as specified.

S/F of 1st class desginer shutter with teak wood in both faces and mouldings any number of panels (Bottom Rails design 8", Middle rails 6" and Top rails 4") complete all as specified.

Ditto but 1st class designer glazed or gauged shutter complete all as specified.

S/F factory made uPVC white colour two track panels sliding glazed window upto 1.50 m height made of (Small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

M/L grinding wooden Surface with sand paper 60 no. Filling with wood filler then grinding with 80 no. Sand paper, then again filling wood Filler then grindng with send paper 100 nos. Then wood Filler with stainer and grinding wiht 150 nos. Sand paper filing, then malamine coat, grinding wiht sand paper no. 320. one coat of lacker then final coat of malamine on designer door exc. 1.25 sqm and not exc. 2 sqm.

Ditto, But chowkhats single rebated or double rebated all as specified.

Bidder Name

Amount

A N BUILDERS (GSTN-06AADFA9365M1Z2) BID ID -3290274

M/s B.S.Jain (GSTN-06AAHFB5477H1ZB) BID ID -3290756

R.D Builders (GSTN-NA) BID ID -3290817

Hitech builders (GSTN-NA) BID ID -3290836

M/s. Om Jagdish Builders (GSTN-NA) BID ID -3290791

M/s Shivani Constructions (GSTN-NA) BID ID -3290718

Hitech builders (BID ID -3290836)

M/s Shivani Constructions (BID ID -3290718)

M/s. Om Jagdish Builders (BID ID -3290791)

R.D Builders (BID ID -3290817)

M/s B.S.Jain (BID ID -3290756)

M/s B.S.Jain (BID ID -3290756)

M/s Shivani Constructions (BID ID -3290718)

M/s. Om Jagdish Builders (BID ID -3290791)

A N BUILDERS (BID ID -3290274)

Hitech builders (BID ID -3290836)