For Construction of 33 KV line under construction 132 33 KV Sub Station Hasanpur (Chachora) to 3311KV Sub Station Rehra (3 INTO 5 MVA) District Amroha

Carriage/ Loading & Unloading of Material from any Store Centre under PVVNL, depending upon the availability of material, to site. (For S.no-1.01 to 1.04) 1.01- 9 Mtr. PCC Pole

11 mtr. Long STP, SP-55 round Pole.

All other Material except Poles & ACSR Dog Conductors

ACSR Dog Conductor

The excavation of foundation pit in mix soil/normal soil/soft & hard rock and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support and Erection of support in the pit, after fixing stone pad including providing of stone pad size 300x300x75mm as per Respo Norms. The work includes carriage and handling of supports from sectional store to pit site as well as fabrication work if required. ( For S. No-2.01 to 2.08) 2.01- 9M Long PCC Pole (Single Pole)

11 mtr. Long STP round Pole. (Single Pole)

9M Long PCC Pole (Double Pole Structure)

11 mtr. Long STP round Pole. (Double Pole Structure)

9M Long PCC Pole (Tri Pole Structure)

11 mtr. Long STP round Pole (Tri Pole Structure)

9M Long PCC Pole (Four Pole Structures)

11 mtr. Long STP round Pole. (Four Pole Structure)

Earthing of supports with M.S. earth Rod of (20x2500)mm long including excavation of pit and driving M.S.Rod 3.0M apart from suppor and 0.5M below the ground level and connecting belowl the earth electrodes with the help of G.I.wire No.8SWG and including providing & fixing of earthing lugs. Every support & Matelic parts shall be be earth. Respo Drawing no.-DD&SO-27 ( For S. No-3.01 to 3.08) 3.01- 9M Long PCC Pole (Single Pole)

11 mtr. Long STP round Pole. (Single Pole)

9M Long PCC Pole (Double Pole Structure)

11 mtr. Long STP round Pole. (Double Pole Structure)

9M Long PCC Pole (Tri Pole Structure)

11 mtr. Long STP round Pole (Tri Pole Structure)

9M Long PCC Pole (Four Pole Structures)

11 mtr. Long STP round Pole. (Four Pole Structure)

Fixing of 33KV V-type cross arm 100x50x6mm, 33KV F-bracket, 33KV Pin Insulator, 33KV Pin including providing of required clamps, nut & bolt as per Respo Norms. Respo Drawing No.-DD&SO-21Cross arm clamp, F-Clamp made of M.S flate of size 75x10mm ( For S. No-4.01 to 4.02) 4.01- 9M Long PCC Pole (Single Pole)

11 mtr. Long STP round Pole. (Single Pole)

The work includes carriage and handling of required accessories, from sectional store to pit site as well as any fabrication work if required & fixing of cross bracing sets 4.3mtr, from M.S.Angle 65x65x6mm/ 50x50x6mm, E-bracket, Dist insulator, top channel 125x65mm, 3200mm, 33KV Disc fitting, 33 KV pin insulator, 33KV Pin etc including providing of E-brackets, required clamps, Nut & bolts as per Respo Norms/ as per schedule with required accessories. Respo Drawing No.-DD&SO-20 Cross arm clamp, F-Clamp, Top Channel clamp, made of M.S flate of size 75x10mm, Bracing clamp made of M.S flate of size 65x8mm (For S. No- 5.01 to 5.06) 5.01- 9M Long PCC Pole (Double Pole Structure)

11 mtr. Long STP round Pole. (Double Pole Structure)

9M Long PCC Pole (Tri Pole Structure)

11 mtr. Long STP round Pole (Tri Pole Structure)

9M Long PCC Pole (Four Pole Structures)

11 mtr. Long STP round Pole. (Four Pole Structure)

Grouting of supports in CC 1:4:8 (Cement, sand & 40mm brick ballast). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grit) with muffing as per Respo Norms including providing of requried material. Work includes back filling and proper ramming. (For S. No- 6.01 to 6.08) 6.01- 9M Long PCC Pole (Single Pole)

11 mtr. Long STP round Pole. (Single Pole)

9M Long PCC Pole (Double Pole Structure)

11 mtr. Long STP round Pole. (Double Pole Structure)

9M Long PCC Pole (Tri Pole Structure)

11 mtr. Long STP round Pole (Tri Pole Structure)

9M Long PCC Pole (Four Pole Structures)

11 mtr. Long STP round Pole. (Four Pole Structure)

Grouting of stay rods (20x1800)mm including all work of excavation of earth 600x600x1300mm as per Respo Drawing DD&SO-31 & concreating in size (0.60x0.60x0.30)m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per respo norms including providing of requried material. Including back filling of soil and proper ramming etc.

Fixing, tightening & nozzling of stay wire with stay rod with the poles of required tension as per respo norms, including fixing of Stay Insulators of 33KV including providing of stay insulator and stay clamps, nut & bolts, etc. As per Respo Drawing DD&SO-31

Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with Line chart including binding and fixing of all accessories in 03Nos. Conductor in parallel.

Providing of P.G.Clamps of proper sizes at all section poles, suitable for Dog Conductor as per respo norms. ( For S. No - 10.01 to 10.03) 10.01- Sectional Double Pole

Sectional Tri Pole

Sectional Four Pole

Making Jumpers on Section Points, by fixing of P.G.Clamps of proper sizes, suitable for Dog Conductor as per respo norms. ( For S. No .11.01 to 11.03) 11.01- Sectional Double Pole

Sectional Tri Pole

Sectional Four Pole

Guarding between two poles like single poles, double poles, Tri pole, four poles, etc. to guard L.T., 11KV Line telephone and river crossing, road crossing etc. with G.I.wire No.6SWG and G.I.wire No.8SWG, including cutting with fabrication and fixing of guarding angle 75x75x6mm, including providing of requried clamps, nut & bolts, eye bolts etc, as per Respo Norms. Guarding clamp made of M.S Flate 65x8mm.

Providing of danger board at each location as per specification of the respo norms.

Fixing of danger board at each location as per specification of the respo norms.

Providing of Number Plate at each location as per specification of the respo norms.

Fixing of Number Plate at each location as per specification of the respo norms.

Chopping of branches of trees of eucalyptus, Neem, Keekar and other kind of trees along the route of the line and disposal of the same at suitable place.

Making H.T.Connection of the proposed line from Primary 220/132/33KV S/S. The work consists of fixing & fabrication of Dropper Channels, & fixing of Disc Insulators, Pin Insulators, jumpering with providing & fixing of P.G.Clamps, clamping and binding etc,as per site conditions.

Providing of barbed wire on 33KV SP-72/SP-55 ST Poles/PCC Poles, as anti-climbing device.

Wrapping of barbed wire on 33KV SP-72/SP-55 ST Poles/PCC Poles, as anti-climbing device for a length of 0.9Mtr. Wire pitch/gap 13mm and fixing upper and lower end keeping lower end at a height of 2.75Mtr. from the ground, complete with providing & fixing of lower end & upper end clamps, made of M.S.Flat 40x5mm complete with nuts & bolts as per respo norms.

Painting of following supports/structures of 33KVLine, with two coats of synthetic enamel aluminium paint after one coat of ready mix primer, including provididng of all material (red oxicide and Aluminium paint), as well as rubbing/cleaning of surface as required for proper completion of work . (For S. No-21.01 to 21.04) 21.01- Double Pole Supports (11Mtr SP-55 Poles including all channels/x-arms/clamps etc)

Single Supports (11Mtr SP-55 Poles including all channels/x-arms/clamps etc)

Tri Pole Supports (11Mtr SP-55 Poles including all channels/x-arms/clamps etc)

Four Pole Supports (11Mtr SP-55 Poles including all channels/x-arms/clamps etc)

Providing materials and fabrication fo Terminal Gantry Structure as per Respo specification

Erection and fitting all accessories of Terminal Gantry in switchyard of 33/11KV S/S Rehra as per respo specification. Providing cement, sand & 20mm stoneblast.

Fabrication of line isolator struture as per respo specification.

Erection of isolator struture on switchyard of 33/11KV S/S Rehra as per respo specification. Providing cement, sand & 20mm stoneblast.

Erection of 33KV Isolator and fitting it is main opening & closer handle and earth blade handle as per specificaion. Providing required connetors & clamps.

Connection of 33KV line to 33KV Bus-Bar at 33/11KV S/S Rehra by providing proper size of PG Clamp/connector.

BALA JI ELECTRICAL AND CONTRACTOR