Miscellaneous maintenance work in HWB at 4th floor (South wing), 5th floor (South and North wing) and Zero floor V.S.Bhavan, Anushaktinagar.

Amount

Providing, applying plastic emulsion paint of approved brand and shade as per manufacturers specification, roller finish including scrapping the old paint thoroughly, one coat of plastic paint primer, sealing of crack with plaster of paris , providing and applying Birla make wall care putty-SF for leveling of the wall surface ,all as per site instructions of the engineer-in-charge etc. complete including scaffolding, cleaning and protecting the furniture, computer, floor surface etc by covering properly, complete as per specification and as directed by the Engineer -In- Charge.

One coat

Two coat

Providing and painting with synthetic enamel paint in one coats of approved make and shade on existing painted surface of door & windows frames and shutters, wall panelling etc. including repairing, cleaning, filling cracks, if any with putty etc. complete as per specification and as directed by the Engineer-In- Charge.

Providing and applying 2 coats of French spirit polishing on wooden cladding, railing , furniture etc with approved tint and make and tint to obtain required finish over a coat of wood filler including spray gun, sand papering, cleaning, filling up holes, cracks and crevices with putty etc. to give an even shade complete to give an even shade etc. complete as per specification and as directed by the Engineer.

Same as above but for mouldings and edges of existing furniture i.e workstation, storages etc

upto 50 mm wide

above 50 to 100 mm wide

Providing and applying two coats of epoxy paint of approved brand on exisitng flooring and wall surfaces including appropriate priming coat ,preparation of surface etc complete as per specifications and as directed by EIC.

Providing & Fixing frosted film manufactured by 3 M approved equivalent on glass partition wherever required as per the instruction etc. complete as per specification and as directed by the Engineer.

Providing and fixing 25micron thick non reflective type sun control film of M/s. Garware or approved equivalent make for windows door glasses etc. including cutting to size, solution for fixing, cleaning the glass, removal of existing film if any, disposal of debris to outside of colony premises etc. all complete as per specifications and as directed by EIC.

Supplying and fixing in position Roller blinds of approved brand for windows made with fabric of approved quality, design, make and shade comprising of polymer coated fiber fabric approved by the EIC. The roller mechanism shall be a molded unit made from engineering grade plastic polymer with steel spring support. The fabric shall be finished on the sides with edge tape duly welded for waviness control. The fabric shall be attached to the roller tube with high quality selfadhesive tape, with smooth manual operation, with all fittings complete as per manufacturer's specifications. Rate should including removing existing vertical blinds and disposing the material as directed by EIC etc. all complete as per specifications and as directed by EIC.(Measurement to be made on the opening size of the window).

Providing and fixing false ceiling with eco-friendly light weight calcium silicate tiles of Spintone/cosmos surface textured "Aerolite " make or equivalent of size 595 x 595mm having 15 mm thick densified microlook edge and 100% humidity resistence, incombustible as per BS 476 Part IV and thermal conductivity 0.043 w/m° KC and NRC 0.50 placed in true horizontal level suspended grid of size 600x600 mm made from hot dipped GI steel sections on Sillhoutte profile, rotary stitched double webbed white with 6mm reveal profile (white/black), where in main T runner of size 24 mm x 38mm and 0.33 mm thick @ 1200mm center to center and cross T of size 24mm X 28 mm and 0.33 mm thick, 1200 mm long spaced between main tee at 600 mm centre to centre and secondary cross T of Size 24mm X 28 mm x 0.33 thick of length 600 mm to be inter locked at middle of the first cross T in each panel to form grids of 600 mm x 600 mm and resting on periphery wall profile wall section 24 mm x 24mm x 0.40 thickness and laying false ceiling for services like diffusers grills including cutting, making opening for light fitting, fixtures, smoke detectors etc. wherever required, main tee runner to be suspended form ceiling using G.I. soffit cleats of size 25 x 35 x 1.6 mm of required length fixed to the ceiling with12.5mm dia and 50 mm long dash fastener, 4 mm dia G.l adjustable rods with good quality G.I level adjustment clips of 85 X 30 X 0.8mm spaced at 1200 mm center to center along main tee all complete at all heights as per specifications, drawings and as per direction of Engineer - in - Charge.

P&F in position Gypsum board false ceiling with 12.5mm th. Gypsum boards, screwed/ fixed to the under struct of suspended G.I. Grid const& suspended from the main ceiling of ceiling sectn at max c to c distance of 450 mm perimeter channel and intermediate channels at max c to c distance 1200 mm galvanised grid should be fixed to RF CC slab.The gypsum board should be fixed to galvanised iron grid with necessary screws.The boards should be taped and filled from underside to give smooth, seamless ceiling.The rate should include necessary additional ceiling sections and intermediate channels to be provided at openings for light fixtures, asbestos cement ducts, vertical drops, offsets etc. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 mm item to be comp in all respect.(G.I. perimeter channel size-27mmx0.5mm thk.,flange-20mm &30mm,intermediate channel. size-45mm & 0.9mm thk., hanger size-25mmx0.5mm thk.)complete.

Providing and fixing bright finished Good quality heavy duty Stainless steel hanging type floor door stopper of size 150 mm etc. complete as per specifications and as directed by EIC.

Providing and fixing SS soft closing heavy duty telescopic channel (500 mm long) of approved make or equivalent for drawers with all necessary fittings and fixtures etc. Complete as per specifications and as directed by EIC.

Providing and fixing multipurpose furniture lock wherever required including removing of damanged lock etc. complete as per specifications and as directed by EIC.

Labour charges for repairing of existing drawers , locks, shutters etc. complete as per specifications and as directed by EIC.

Providing and fixing Bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. as per specifications and as directed by EIC.

Labour charges for repairing work of existing aluminium doors which includes aligning of door, repairing and refixing existing fittings including handles, lock, floorspring etc. complete as per specifications and as directed by EIC,

Providing and fixing double action hydraulic floor spring of approved brand and manufacturer confirming to IS:6315 with SS cover plate having logo embossed on the body/ plate with double spring mechanism for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot etc. complete as per specifications and as directed by EIC.

Providing and fixing Stainless steel matt finished 32 mm thick 600 mm long double handles ('H' shaped) with concealed screws including making necessary holes in glass/ Aluminium door for fixing the handles complete as directed by engineer in charge (both inside and outside handle put together measured as one handle)

Providing and fixing approved vinyl plank flooring having 2 mm thick of approved pattern and shade including necessary adhesive over the IPS/ Mosaic flooring / Skirting including cutting to the required size and shape including wastage, removal of old existing flooring , levelling of existing flooring if required and cleaning the flooring before and after the completion of works all as per generally manufacturer's specifications and as per pattern and including disposal of debris outside colony and as directed by EIC

Repairs to plaster of thickness 12 mm to 20 mm including cutting the existing plaster in ,raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish outside the colony premises etc. complete as per specifications and as directed by EIC.

Providing and laying at all floors and levels 6mm.(min.) thick or as per specifications of approved manufactuer first quality matt finished/ white/ivory coloured ceramic glazed tile flooring / dado/ cladding as per of M/s H . R Johnson (I)Ltd. laid in cement mortar bedding / backing, close jointed and grouted with matching cement slurry to match the colour of the tiles, finished to level, line, slope and plumb including cutting of tiles, making openings/ cutout if necessary, wastage and final cleaning of surfaces as required, curing etc. complete all as per drawings, specifications & as directed by Engineer in Charge.

Providing and fixing second class teak wood in frames of required sections of doors, windows, cupboards, panelling etc. Wrought framed and fixed in position including fixing with screws, nails including applying one coat of appropriate primer and etc complete as per specifications and as directed by EIC.

Providing and fixing wooden shelves made of 19 mm marine plywood confirming to IS :303 (1989) finished with 1.0 mm thick white laminate on all surfaces and all edges finished with TW beading etc. Complete with all nesessary fittings and as per specifications and as directed by EIC

Providing and fixing wooden shutters made of 19 mm marine plywood confirming to IS :303(1989), shutters finished with 1.0 mm thick decorative laminate on exposed surface and 1.0 mm thick white laminate on inner surfaces , all edges finished with TW beading etc. complete with all fittings i.e ss hinges, ss handles, lock and towerbolt etc. complete as per specifications and as directed by EIC.

Providing and supplying storages made up of required size. Top made of 25mm Marine ply (IS 303 :1989), having post formed decorative laminate of 1.0 mm on top and all external surfaces and 1.0 mm thick white laminate on all internal surfaces etc. complete. Sides, Sides in 18mm thk Marine ply (IS 303 : 1989). Adjustable shelf made in 18mm thk Marine ply (IS 303 : 1989) placed on standard shelf pins etc. complete. Storage Back made of 9mm thick Marine ply (IS 303 : 1989) etc. Sides, Shutters, Bottom, adjustable shelf, finished 2mm thick machine pressed PVC Edge banding of required size etc. Hardware set to include 110 degree opening self- closing box hinges, Counter Sunk screw, S.S.Brush Finished, Handles L’ Clips Selves support etc. complete. Multipurpose lock, Levelling Bolt with inserts etc. complete. Aluminium furniture feet – Round tube, diameter 40 mm with 100 mm height with suitable finish to match handles’' Shape SS Brush finished handles as indicated in the drawing, suitable locking provision etc. complete.

Providing and fixing wall paper / Graphic for highlighting the walls with proper adhesive in line level for reception, conference & Auditorium rooms and wherever required as per the drawings. Basic rate of Wall paper is Rs..100/- per Sft. Make - D'decor / Nilaya By Asian Paints or equivalent.

Providing and applying at all levels approved silicone sealant at the junction aluminium frame and adjucent RCC/brick/stone work by providing weather silicon sealant over backer rod of approved quality as directed, wherever required or instructed by the Engineer etc. complete as specified in manufacturers specificaitons and directed.

Dismantling aluminium/ Gypsum/wooden partitions, workstations , doors, windows, fixed glazing and false ceiling with framework including stacking of all serviceable material and handing over the same to departmental stores, disposal of debris to designated place within BARC colony or to a designated BMC dumping ground etc. complete with all leads and lifts and as directed by the Engineer In Charge.

Removing existing doors and aluminium windows including stacking of all serviceable material and handing over the same to departmental stores, disposal of debris to designated place within BARC colony or to a designated BMC dumping ground etc. complete with all leads and lifts and as directed by the Engineer In Charge.

Dismantling of existing 6"-9" brick wall with plaster & tiles (if any) as per demolition layout as per approved drawing/as directed by Engineer In Charge, removing door / windows, stacking of all serviceable material and handing over the same to departmental stores, disposal of debris to designated place within BARC colony or to a designated BMC dumping ground etc. complete with all leads and lifts and as directed by the Engineer In Charge.

Renewing glass panes with float glass panes of thickness 4 mm with wooden fillets wherever necessary including racking out the old putty:

Brick work in CM 1:4 with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 and above in superstructure above plinth level upto floor five level in all shapes and sizes including transporation,loading, unloading, necessary curing etc. complete as per specifications and as directed by EIC

Providing and fixing panelling to existing wall with 8mm multipurpose cement board reinforced with suitable fibre cement screws including aluminium framework @ 600C/C distance etc. complete as per specifications and as directed by EIC.

Providing general pest control service to the buildings to control the nuisance of cockroaches, lizards, bed bugs and other insects etc. by minimum four operation as and when directed in a year including monthly check up with additional operations if required and as directed by Engineer-In-Charge.

Providing, fabricating and fixing MS stand, grill, frames and grating of required pattern for AC outer Unit with M.S.flats, squares or round bars with screws, rawl plugs etc. including priming coat of approved primer and two coats of approved synthetic enamal paint etc. complete as per specifications and as directed by EIC.

Providing and fixing bird net made of 2mm S.S. 316 pvc coated Wires including framework made of aluminium sections of approved make etc. complete as per specifications and as directed by Engineer in Charge.

Providing and applying 12mm thick average premixed formulated one coat gypsum light weight plaster having additives and light weight aggregates as vermiculite /perlite respectively confirming to IS:2547 (part I & II)1976 applied on hacked/ uneven background on walls at all floors and location, finished in smooth line and level including cleaning and preparation of existing surface etc. complete as per specifications and as directed by enigneer in charge.

Providing and applying white cementicious wall putty with avg. thickness 1 mm of approved brand and manufacturer finish at all heights and locations for concrete/plastered surfaces etc. complete as per specifications and as directed by engineer in charge

Providing and fixing panelling with 6 mm thick WPC (Wood Polymer composite) solid boards with decorative finish with aluminium framing work etc. complete as per specifiations and as directed by EIC

Providing and fixing 35 mm ISI Marked flush door shutters conforming to IS 2202 (Part I ) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters fixed to pressed steel frame (which will be paid in seperate item) including necessary SS fixtures and fittings, SS butt hinges, 6 lever Chromium pleated brass Mortice locks with handle, 150 mm SS tower bolt, door stopper, 20 x 4 mm size MS hold fasts welded to angle frames and grouted in 100 mm thick cement concrete 1: 2 : 4, providing and applying two or more coats of synthetic enamel paint of approved quality and shade over a coat of approved primer on putty finished surface of door etc., all complete as per drawings, specifications and as directed by the Engineer.

Providing & fixing pressed steel door frames confirming to IS:4351, profile B, manufactured from commercial mild steel sheet of 1.60 mm thickness including jamb, lock jamb, bead and base ties of 1.60mm pressed mild steel welded or rigidly fixed together by mechanical means including M.S.pressed butt hinges 2.5mm thk with motar guards, lock strike plate and shock absorbers including fixing with adjustable lugs with split end tail to each jamb as specified and applying coat of approved steel primer including two coats of synthetic enamel paint etc. complete as per specifications as directed by EIC.

Labour charges for removing and refixing of existing aluminium window etc. complete as per specifications and as directed by engineer in charge

Providing and fixing approved quality 6mm thick best quality bevelled edge plate Glass Mirror of average1800x900 mm size with 6mm thick multipurpose bison board backing with plastic moulded frame of approved make and shade including providing & fixing rawl plug in wall / RCC, drilling suitable size hole, wooden packing if necessary,reinstating the damages to original condition etc., complete all as directed by Engineer incharge.

Providig & Fixing 100 mm dia.UPVC 'P' trap Suspended type floor Drain of standard design. with EPDM rubber gasket jointng as pe DIN- 19543, ASTM C 1277-4 including cutting the floor/wall tile/masonry work of required area for fixing the trap and finishing the same after installation etc. complete as per specifications and as directed by EIC.

Disposal of building rubbish/ malba/ debris/ dismantled or waste material within BARC colony or to a designated BMC dumping ground upto lead of 10 km including loading , unloading , transport, spreading and levelling etc. complete with all leads and lifts and as directed by the Engineer In Charge

Providing & fixing anodised aluminium work for windows of sliding type at all level with extruded built up standard tubular and other sections of 'Jindal' make or equivalent conforming to IS : 733 and IS : 1285 , anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including filling up gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing , C.P. brass/stainless steel screws, including heavy duty superior quality rollers, fasteners. fitting ,Handles , locking system etc complete, also includes finishing of the surfaces with proper material and plastic emulsion paint to match the surround surfaces etc. complete as per specifications and as directed by EIC. It also includes : 1) Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone/wood work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 2. Necessary mastic is to be provided against leakage of air. .etc.all complete as per the directions of Engineer-In-Charge (Glazing will be paid for separately). Aluminium sections will be approved by EIC. Note: Aluminium sections for window only shall be measured in weight & paid. Locking arrangement, fixtures shall not be measured & paid. Tenderers are required to consider the cost of all fittings, cleats, fixtures, locking arrangement ,handle, pegstays, screws, hinges etc. while quoting the rate for unit weight of aluminium sections for window.

Extra for providing & fixing glazing with 4.0 mm thk float glass of M/s. Triveni, M/s. Modi or equivalent with PVC / Neoprene gasket etc complete as per the the directions of engineer in charge ( Cost of aluminium snap beading shall be paid in item No. 3.) (Clear area of Glass shall be measured for payment)

Refurbishing of existing sofa by replacing fabric as approved etc. complete as per specifications and as directed by EIC. ( basic cost of fabric should not be less than 325/SQm)

Two seater sofa (1.31m)

Three seater sofa (1.80m)

Rebate for following items which includes removing the scrap & disposal of the same outside the premises

Rebate for scrap material i.e door shutters

Rebate for scrap material Ventilators , shutters etc.

Rebate over dismantling existing Aluminium sliding/openable door and window ventilatior etc

M/S LUXUS INC (BID ID -3271004)

Bombay Construction (BID ID -3272156)