Provision of toilet inside building, floor finishing works, joinery works, brick work, plaster work etc. and water proofing treatment of roof of bldg. No. RK 101 utility house inside factory at O.F.Bhandara.

Amount

M&L for RCC type B1, 1:2:4, 20 mm graded aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under - reamed piles and mass concret complete all as specified and as directed by the E-I-C

M&L for RCC type B1, 1:2:4, 20 mm graded aggregate in slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the likecomplete all as specified and as directed by the E-I-C.

M & L for mild steel deformed or twisted bars TMT of 8 mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including M.S. wire (annealed) not less than 0.9mm

M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and beams, sides and soffits (if any) of foundation and plinth beams , and similar work, vertical or to batter, work in rough finished flat surfaces of concrete complete all as specified and as directed by E-I-C

M&L for Formwork to faces of walls, retaining walls, abutments,parapets and staircase railings and similar work includingattached pillasters, buttresses,etc.; vertical or to batte

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completeota stone

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in 1:4 cement mortar.

M & L for rendering 25mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces & is to be finished even and smooth complete all as specified and as directed by the Engineer-in-Charge

M&L for Screed bed or bedding layer of cement mortar!:4, 30 mm thick for laying floor finishes .

M&L for Framed work such as grills,gratings, etc.. with ends of bars shouldered or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings ; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L for Plain, solid, straight chowkats and frames in 1st class hard wood , wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed

S & F 40mm thick, Ist class hardwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged); fitted to chowkats complete all as specified & directed by E-I-C.

M&L for Powder coated in any colour ( minimum 50 micron ) Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

M&L Powder coated in any colour ( minimum 50 micron ) Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

M&L for 5mm thick sheet glass, ordinary quality and glazing with oil putty or aluminium clips & rubber beading in square n exc 0.5 sq. m in each pane .

M& L for liquid water proofing compound and mixing in wet concrete as directed by E-I-C

Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples

PVC (SWR) pipes single socketed in any length with rubber ring joints fixed / clamping to walls

M&L for PVC (SWR) bends in 110 mm radius & fixed .

M&L for gear operated type with bevel gear box and crank handle, laths 1.25 mm thick steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete:

S & F butt hinges 150mm size, type B-12, extruded brass, with mild steel hinge pin, bright polished complete all as specified& directed by E-I-C.

S & F 375mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts complete all as specified and as directed by the Engineer-in-Charge

S & F 300mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified

S & F 150mm extruded brass handles, fabricated type polished complete all as specified and as directed by the E-I-cin-Charge

Floor door stopper of aluminium alloy 150 mm body and tongue, anodised, with hard drawn steel spring, fixed in floor

M&L for Door closer alluminium extruded section body hydraulically egulated,d esignation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed in frame.

M&L for Brass Mortice lock in 4 levers, vertical type, size 100 mm

S & F solid pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ''C'' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet beading, and joined together with solvent cement ,supplying & fixing in the frame at site as per as specification & drawing.

M&L for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specifica- tion & drawing.

S & F butt hinges 100 mm, extruded alluminum anodised complete all as specified and as directed by the Engineer-in-Charge

Supply and fixing for ISI marked 200mm long aluminum alloy, anodized sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloys to door shutter complete all as specified and as directed by the Engineer-in-Charge.

S & F 150mm long aluminum anodised barrel tower bolt, riveted or spot welded type with back plates, with bright bolt and open staple complete all as specified and as directed by the Engineer-in-Charge

S & F only vitreous China squatting pan, ‘Orissa’ pattern, size 630x 450 mm, white, with integral foot rests (excluding flushing cistern and flush pipe),including removal of existing damaged WC and making good all to match with existing including P trap or S trap complete all as specified

S & F 10 ltrs capacity PVC Valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets,PVC flush pipe 32mm dia and PVC connection pipe 15mm dia for flush inlet with PTMT nuts of length 450mm complete all as specified and as directed by the Engineer-in-Charge

S & F for ISI Marked 15mm bore medium grade GI tubing with all fittings , fixed on wall complete all as specified and as directed by the Engineer-in-Charge.(

S & F for ISI Marked 20mm bore medium grade GI tubing with all fittings , fixed on wall complete all as specified and as directed by the Engineer-in-Charge.

S & F of ISI marked 15mm bore dia. plug type bib taps, made of cast iron, screwed for iron pipe and fixed complete all as specified and as directed by the Engineer-in-Charge

S & F of ISI marked 15mm bore stop valve, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed by the Engineer-in-Charge.

M & L for wash basins, Vitreous China (flat back or angle back type) in 630 x 450 mmsize, including cutting for and pinning in ends of brackets or erecting stand but inclusive of fixing of supply and waste pipe complete all as specified and as directed by the Engineer-in-Charge

M & L for PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and as directed by the E-I-C.

M & L for 100 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed by the Engineer-in-Charge

S & F for 110mm bore PVC (SWR) junction single (Single T) equal or unequal, complete all as specified

S & F 110mm bore PVC (SWR) vent cowl, complete all as specified

M & L for supply & fixing only wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed by EIC.

M &L vitrified ceramic Tiles 10 mm thick anti skid (square/ rectanguler ) polished area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match (anti skid)

Supply and fixing pillar cock CP to wash basin/ sink 15mm bore and weight not less than 400gm each with all accessories and taing down old cock etc. complete.

Supply and fixing PVC. Connection pipe 15mm bore dia for washbasin, sink, flush tanks, urinals with all accessories etc. complete.( make finolex, supreme plasto OR quivalent ISI marked)

Supply&fixing only vitreous China Urinal, half stall type, white, (excluding flushing cistern, flush pipe and waste pipe), complete all as specified

M & L for granite (of any type ) work ( Table rubbed and polished )for wall lining (veneering to wall)20 mm thick in cement morter (1:3)and pointing with white cement (1:2)using marble dust with admixture of pigment to match with shade of granite

Supply & fixing for vitrious china squattng pan,Orrisa pattern water closet size 580x440mm white with integral foot rest Make Parryware, Hindware, Cera, Johnson etc.OR equivalent

Glazed ceramic tiles in vertical serface 350x250x 7mm, /450x350x7mm thick set and jointed in neat cement slurry and pointed in white coloured cement to match

M&L for Vitreous China half stall urinal type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. Not less than 150 gms/sqm) land on primed surface by forced application omplete all as specified.

JAYPEE ENTERPRISES

DARSHAN SINGH PLAHA

H R LANJEWAR