Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.6 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹19.4 L+₹1.4 L (8.04%)Rejected-Finance VPO DHANNA DISTT KATHUA J K PIN 184152 | KATHUA | JAMMU AND KASHMIR | 184152 | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹20.5 L+₹2.5 L (13.9%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹20.5 L+₹2.6 L (14.2%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹21.1 L+₹3.1 L (17.5%)Rejected-Finance VILL CHOMON ADAMPUR JALANDHAR PUNJAB 144103 UDYAM PB 10 0011450 | JALANDHAR | PUNJAB | 144103 | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹21 L
EMD Value
₹42,000
Closing Date
26 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SAMBA
GE SAMBA
SPL REPAIR TO BLDG NO T 40 AND T 37 OTM ACCN AT BHIM LINE AND CERTAIN MINOR WORKS UNDER GE SAMBA
2022_MES_551309_2
GE/SMB/T-49/2022-23
Open Tender
Civil Works
Item Rate
180 days
SAMBA
REF NIT
8 documents required · 8 mandatory
₹500
Yes
GE SAMBA
₹42,000
Yes
8 Dec 2022
5 Nov 2022
28 Nov 2022
5 Nov 2022
26 Nov 2022
12 Nov 2022
5 Nov 2022 - 7 Nov 2022
Amount
Taking down cement plaster on brick/concrete surfaces or stone walls, ceiling, etc, including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed .
Rendering 10+5 mm thick on fair faces of brick or concrete surface walls in two layers, in cement mortar 1:4 , rendering is to be finished even and fair without using extra cement (WPC shall be measured and paid separately) complete all as specified and as directed .
Rendering 10 mm thick cement plaster in cement mortar 1:6 on on brick /stone/concrete surfaces finished even and smooth without using extra cement , complete all as specified and directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for ,complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for ,complete all as specified and directed.
Demolition of brick work or stone masonry, built in cement mortar incl all quoins, arches pillars etc complete all as specified and directed .
Brick work with sub class 'B' burnt bricks straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and directed .
Brick work with sub class 'B' burnt old size bricks straight or curved on plan exc. 6 m mean radius bult in CM 1:6 but except bricks,complete all as specified and as directed.
Taking down asbestos cement, corrugated or semi-corrugated sheets in roofs incl ridge, complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
Dismantling timber scantlings 40 sq. cm and over in section, in any position, framed work, complete all as specified and directed. Note- all the truses, rafter, purline to be dismantle carefully with out damage of existing floor and wall ties using sand cushion and wall screen.
Pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in roof covering/cladding to wall fixed with self tapping screws including side and end lap as per manufacturer’s instructions complete all as specified and directed.
Pre-painted galvalume aluminium zinc coated GI based plain steel sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in ridges, fixed with self tapping screws including side and end lap as per manufacturer’s instructions complete all as specified and directed.
Roof trusses (framed), trussed, purlins, rafters, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, flat, hollow sections) including distance pieces, cleats, welding/rivets/nut/bolts/washer etc, conforming to Fe-410-W (Gde-E-250) Quality-'A' ,complete all as specified and as directed.
Designer ceiling board tiles 600x600x4mm thick white prelaminated self embosed reinforced of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24 mm wide T-section exposed flanges which shall be power coated white. The frame work shall comprise of main runner made from 0.33mm thick G S sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers/suspended with 2 run of 2 mm dia of GI wire to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600 mm to be supported independently. 600x600 mm modulesto be formed by fitting 600 mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS shgeet of size 19x19mm and 300 mm long of white colour all as specified by manufacture instruction.
PCC 1:2:4 type B-1 (using 20 mm graded stone crushed aggregate) as in coping, bed blocks, junction of parapet wall, fixing of truss etc including preparation of surface and fair without using extra cement, complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.5 square metre each including cutting holes for taking out hold fasts of dismantling brick work ( holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed. Note- Scrap iron for window grill and angle measured separetely)
Taking down chowkats or frames with shutters (without taking off shutters from frames) area exc 1.5 sqm but not exceeding 4 square metre each including cutting holes for taking out hold fasts of dismantling brick work ( holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed. Note- Scrap iron for window grill and angle measured separetely)
Pressed steel frames 105mm x 60mm made out of size 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hold fast,hinges, lock strike plate, etc and making good in CM 1:3 or cement concrete 1:2:4 Type B-1 including PCC 1:3:6 C-1 as in back filling to chowkhats .complete all as specified and directed .
Pressed steel frames 125mm x 60mm made out of size 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hold fast,hinges, lock strike plate, etc and making good in CM 1:3 or cement concrete 1:2:4 Type B-1 including PCC 1:3:6 C-1 as in back filling to chowkhats .complete all as specified and directed .
2nd class hard wood 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed .
2nd class hard wood Glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and directed .
Box type steel windows comprised of tubular frame and shutters made out of outer frame ERW tube 'P' section (60x45x25)mm and shutters of ERW tube 'P' section (50x35x20)mm openable shutters side hung including piston hinges with two nos of MS tower bolts 150 mm size on each shutter steel handle and stopper of 'Z' section as specified complete with sash bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitable fittings / opening for cooler / AC where required. Steel windows will be double shutter external glazed and internal wire glazed complete all as specified and as per drawings no. CEPZ/TD-324/07 sheet 1/3 to 3/3. NOTE- The quoted rate against the above item shall also include- (i) 4 Nos MS steel lugs of 20x5 mm MS flat 20 cm long over all welded to frames (ii) PCC block for embedding lugs.
Factory made solid PVC door frame of size 50x47mm made out of 5mm thick prelam PVC sheet with one or more rebate reinforced with MS square tube, fixed in opening as per specification & drawing No CEPZ/TD-378/11 sheet No 1/1, etc complete all as specified and directed.
Factory made Solid panel PVC Door Shutter, 30mm thick (style),consisting of frame made of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded / sealed to the stiles & rails with suitable PVC sheet beadding and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.
Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified fixed with stainless steel wire staples.complete all as specified and as directed .
Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified fixed with stainless steel wire staples fixed in repair,complete all as specified and as directed .
Aluminium alloy, anodised, sliding door bolt Size- 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.
Aluminium handles, cast type, anodised Size-150mm, anodised section and fixed complete all as specified.
Aluminium anodised, barrel tower bolts size 150 mm of extruded section and fixed complete all as specified and as directed
150mm, MS rat tail helical door spring plate type incl roller and roller plate complete all as specified and directed .
3 mm thick sheet glass ordinary quality glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel/Wood/Aluminium as required at site including hacking out old glass, fixed in repair, complete all as specified .
3 mm thick sheet glass ordinary quality glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel/Wood/Aluminium as required at site complete all as specified
Taking down GI pipe 15 mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed
GI water tubing medium grade of bore 15 mm dia with all fitting like as (Elbow, Tee, Sockets, Union, Nipple, and bend etc) on wall for water heater, complete all as specified and directed.
G.I. pipe 15 mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling or laid in floors , but except pipe, complete all as specified and directed
Taking down GI pipe 20 mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed
GI water tubing medium grade of bore 20 mm dia with all fitting like as (Elbow, Tee, Sockets, Union, Nipple, and bend etc) on wall for water heater, complete all as specified and directed.
Dismanting of floor hearth or wall tiling including cement mortar bedding , removing serviceable tiles to store and rubbish off the premises , complete all as specified and directed.
Non-skid Coloured ceramic tiles (1st quality) 7 to 8 mm thick (square / rectangular joint free) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a layer of mortor 15 mm thick in CM 1:6, complete all as specified and directed
Glazed coloured ceramic tiles (1st quality) joint free in vertical surfaces of wall of size 450x250x7mm/ 350x250x7 mm thick set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:3 on brick /concrete surfaces complete all as specified and directed .
Vitreous china ,Squatting pan 'Orissa' pattern size 580x440mm white with integral foot rest including all joints and making good to the floor etc fixed in repair ,complete all as specified and directed.
Vitreous china urinal, half stall type, white (excluding flushing cisteren, flush pipe and waste pipe) including spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60 gms), complete all as specified and directed.
Vitreous China, wash basin white, flat back , size 550mmx400 including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of chromium plated brass. complete all as specified and as directed.
PVC valveless, 10 ltrs, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, & flush pipe of polythylene of low or high density or PVC 32 mm dia, fixing chain and pull, or lever, if any fixed in repair, complete all as specified and directed
15mm bore CP Bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
15mm bore angle valve with wall flange , cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe, fixed in repair,complete all as specified and directed.
15mm bore CP Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repair, complete all as specified and directed.
Brass chromium plated shower rose with or without swivel joints, 125mm size, including fixing to steel pipe or union, fixed in repair, complete all as specified and directed.
Tubular towel rail, 20mm dia, D type, 60cm long between flanges, fixed in repair, complete all as specified and directed.
PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore.complete all as specified and directed.
20 mm dia decorative aluminium anodised alloy curtain rod fixed with two brackets in each window length, complete all as specified and directed.
CP brass grating with hole size 100 mm dia including embeding in tiles with white cement. complete all as specified and directed. Make:- Jainko, Essco, Parko.
75 mm thick cement concrete 1:3:6, type C1, using 20mm graded crushed stone aggregate as in plinth protection, laid in slope of 1:20 and surface finished even and smooth without using extra cement including making joint at 3m interval and at each corner the joint shall be filled with bitumen mastic filling to full depth (comprising one part hot blown bitumen 85/25 and two part of sand), complete all as specified and directed.
Dismantling of CI or concrete drain pipes up to 150 mm dia, jointed in cement mortar and taking out of trenches, if required, complete all as specified and directed .
PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed
PVC (SWR) pipes 75 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed
PVC (SWR) 110mm bore bends any radius with access door, complete all as specified and directed .
PVC (SWR) 75mm bore vent cowl complete all as specified and directed
Rotational moulded polye- thylene water storage tanks of capacity 1000 ltrs (cylindrical vertical with closed top) three layeres hoisted and fixed in position including all necessary connections all as specified in SSR Part I & including dismantling old unserviceable tank, complete all as specified and as directed.
30 mm thick cement concrete 1:2:4, Type B-0 (12.5 mm graded crushed stone aggregate) as in sub-base for floor tiles/Kota stone finished even & rough, complete all as specified and directed
Kota stone floor 18 to 22 mm thick, in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick in CM 1:6, complete all as specified and directed.
Kota stone floor 18 to 22 mm thick, in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick in CM 1:4, complete all as specified and directed.
Supply only of liquid water proofing compound ISI marked complete all as specified and directed
PCC 1:3:6 Type C-2 ( using 40mm graded crushed stone aggregate) for foundation filling and mass concrete, complete all as specified and directed.
Tubular towel rail, 20mm dia, 600 mm long of PTMT fixed with and including CP brass screws and wooden / plastic cleats (minimum weight 190 gms), complete all as specified and directed.
RCC M-15 (Nominal mix) 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in cover slabs for manholes, slabs supported on walls, beams and columns in floors, roof slab, landing, balconies, canopies, deck slabs, shelves and the like etc complete all as specified and directed.
Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
Preparation of new plastered/ concrete surfaces of walls and applying two coats of cement based paint over and including one coat of primer, complete all as specified and directed by Engr-in-charge.
Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etc and applying two coats of cement base paint on walls, pillars, cornice etc (upto 2nd storey with necessary scaffolding complete all as specified and directed.
Preparation of new plastered surfaces of walls & applying two coats of oil bound distemper over a coat of wall care putty, complete all as specified.
Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, ceilings,Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying two coats of oil bound distemper over a coat of wall care putty , complete all as specified and directed.
Preparation of new wooden surfaces and applying Two coats of synthetic enamal paint on wood/wood based surfaces over a coat of pink primer exc. 10cm width or girth. complete all as specified and directed .
Preparation of old painted wooden surfaces having width/girth exceeding 10 cm including necessry putty filling with knife of same colour where required to achieve smooth and even surface and applying two coat of synthetic enamel paint on wood surfaces of any description , complete all as specified and directed
Preparation of new steel surfaces and applying Two coats of synthetic enamal paint on steel/steel based surfaces over a coat of pink primer exc. 10cm width or girth. complete all as specified and directed .
Preparation of old painted steel surfaces having width/girth exceeding 10 cm including necessry putty filling with knife of same colour where required to achieve smooth and even surface and applying two coat of synthetic enamel paint on steel surfaces of any description , complete all as specified and directed
Surface dressing, n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out clean adjacent to plinth protection of building for free flow to rainwater, complete all as specified and directed .
Excavating in trenches, n.exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sq m on plan and getting out in any type of soil, complete all as specified and directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick (available excavated soil). complete all as specified and directed.
15mm bore Stop valves, cast copper alloy,fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair, complete all as specified.
20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed in repair minimum weight 20 mm size-210 gms),complete all as specified and as directed.
Chequered cement concrete tiles 30cm x30cm x 25mm thick, with greay cement and pigment, set, jointed and pointed in neat cement slurry in floors and laid over and including 20mm thick screed bed in CM 1:4 etc complete all as specified and as directed
Providing cement concrete 1:2:4 Type-B0( 12.50mm graded crushed stone aggregate) in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.
Removing excavated soil to a distance n.exc 50m and depositing where directed at a level n.exc. 1.5m above the starting pointing, complete all as specified and directed.
Aluminium frame anodised aluminium powder coated for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc, complete all as specified.
5.5 mm thick sheet glass , coloured and glazing with rubber beading for aluminium doors/ window in squares/ rectangles exc. 0.5 sqm in each pane, complete all as specified and directed.
Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, othe parts made of mild steel heavy duty and fix, complete all as specified.
Taking down old unserviceable aluminium point wiring (light, fan, socket , power socket and bulk head fittings) from PVC/metallic conduit,on surface wiring, on wooden batten/casings & caping complete, including fixture and fittings such as switches, ceiling roses,pendents holder, regulators, sockets and defective main switch/DB/MCB/Metal plug etc. by unscrewing carefully from boards etc complete all as specfied and directed.
Point wiring for one light/ fan/ exhaust fan controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) in and including PVC concealed conduit having thickness not less than 1.8 mm with sunken box having thickness not less than 2.0 mm thickness with 3 mm bakelite laminated socket ISI marked for switches and sockets , including 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping as required and making good disturbed surface area and white wash /colour wash to matching with the existing colour and all as specified and directed . Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green)
All as per srl item No 91 above but for 3 pin 5 amps on independent board complete all as specified and directed.
All as per srl item No 91 above but for 3 pin 5 amps on same board complete all as specified and directed.
Point wiring for one power point controlled by one switch with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) with in and including PVC concealed conduit having thickness not less than 1.8 mm with all fittings including anodise pressed steel sunken box having thickness not less than 2mm with 3mm bakelite laminated sheet ISI marked for switches and sockets , including 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface area and white wash /colour wash to matching with the existing colour and all as specified and directed. Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green)
Switch piano flush type one way 5 amps SP complete all as specified and directed.
Switch piano flush type one way 15 amps SP, 230 volts complete all as specified and directed.
Socket outlet 3 pin 5 amps flush type complete all as specified and directed.
Switch Socket multipurpose 2 in 1, 6 pin 5 and 15 amps controlled by one switch flush type universal.
Ceiling rose 65 x 50mm three terminals complete all as specified and directed.
Ceiling fan regulator electronic type 5 stage speed variation,socket type is size, ISI marked complete all as specified and directed.
Lamp holder/batton holder/angle holder insulated body(Metal ring) with back bakelite plate suitable for batten fittings, complete all as specified and directed.
LED tube light fitting 20 watt, 230 volt,box type complete bipin holders, connector block and retro LED rod of 20 watt polycarbonate diffuser having high efficacy (single side connection) complete with all accessories internally pre wired batten(single side connection) including connecting up with three core twisted flexible copper conductor cable of suitable size and mounted on PVC square block complete all as specified and directed,LED tube rod ,make :Havells ,cat part no: TITANIANEO1213T8SSTL20WLED865SPC and LED tube light batten ,make :Havells ,cat part no: REGALBATTANT8UPTO1X22WSSBSWH or technocommerically equivalant make of Crompton/Philips/Halonix/Benlo. Note: (i) Contractor shall produce LM 79 & LM 80 test report form OEM owned NABL accredited laboraory. (ii) Contractor shall give gurantee of complete fitting/ fixtures for minimum of 2 years form the date of completion. (iii) Contractor shall conduct the inspection of company representative at site before installation of fittings/fixtures at no extra cost.
Environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head Back-lit LED luminaire comprising of high brightness LEDs. suitable for 10W IP-66 Make: Havells ,cat part no :HEXAFT10WLED857SSYMBOPC or technocommerically equivalant make of Crompton/Philips/Halonix/Benlo.
Sheet metal enclousre for DBs when MCB to be used double door powder coated factory made flush fixed complete with 200 amps rated bus bar 240 volts single phase 12 ways complete all as specified and directed,
MCB SPN 63 amps 240 Volt 'C' series complete all as specified and directed.
MCB SP 6 to 32 amps 240 Volt 'C' series complete all as specified and as directed.
Propeller type AC ventilating fans, Single phase , 230 volts 300 mm sweep metallic with louver shutter complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (inner surface of the wall ) and connecting with and including PVC insulated three core 1.5 Sqmm copper cable from ceiling rose to exhaust fan with black synthetic enemel paint 2.0 cm high complete all as specified.Make of Exhaust fan - Havells, Model Turbo Power(1Ph) or technocommerically equivalent Polycab / Crompton / Bajaj / Usha / Orient
Bib taps, 15 mm dia cast copper alloy with crutch or butterfly nuts screwed for iron pipe and fixed in 20mm bore dia pipe complete all as specified and directed .
Stop valves of 15 mm bore, cast copper alloy screwed down high pressure, with cruch or butter fly handle, screwed both ends 20 mm GI water tubing complete all as specified and directed.
Water heater storage type, electric, capacity 25 Ltrs, BEE 5star rated pressure 8 bar 3 level safety capillary thermostat, automatic thermal cut-out & multifunctional valve to provide higher safety with set of hot and cold flexible connection pipe and connecting electrically complete all as specified and directed.
House service bracket (hook type) complete with 3.0 m long G.I. pipe 40 mm dia medium grade, two nos 900 mm bend, MS hook and stay or guy, complete all as specified and directed.
1100 volts grade heavy duty cable16 sqmm 2.0 core PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular soild conductor , complete all as specified and directed.
Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in the ground (earth pit not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized iron wire 4mm dia as earth lead by means of nuts bolts,washers of GI upto test point,GI tubing light grade 15mm bore protection pipe and GI watering pipe 20mm light grade with funnel and wire mesh ,charcoal and salt,40mm thick pre-cast RCC M-15 (nominal mix) cover reinforced with XPM weight not less than 4 kg /sqm with suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover ,PCC M-15 (nominal Mix) pit,excavation and earth work in any type of soil and removing surplus soil to a distance n.exc.50m) and connecting, Testing on complition, Complete all as specified and shown on Electrical Plate No 3 of SSR-2009 Part-1. complete all as specified and directed. Notes:- 1. Earth lead & protection pipes length upto & including 7.50 mtr is included in the quoted rate. 2. Soil should be free from stone, boulders, aggregate, gravels etc.
Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents.
stage.html
html • 0.07 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .