REPAIR/REPLACEMENT OF TILLING PLASTERING, PLUMBING AND SANITARY APPLIANCES, MISC REPAIR IN MD AND OTM ACCN AND PERIODICAL SERVICES AT AF STN MSSAMRI

Amount

Dismantling plain or corrugated steel sheeting any gauge, thickness in roof covering.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets.

S&F for Anodised aluminium/ GI snap grid power coated framed work of size main runner 39x24.70x0.80 mm, cross tee size 29.x24.70x0.80 mm, wall angle 22.2x22.2x0.65 mm and size of grid 605x605 mm for false ceiling all as specified with 4mm thick GI suspender complete all as specified and as directed.

M & L for 4mm thick Non Asbestos designed fibre Cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with screw in ceiling flat or sloping,complete all as specified and as directed.

Dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises.

Glazed ceramic coloured tiles in vertical surfaces 450x 350x 7 mm thick set and jointed in neat cement slurry & painted in white or colour cement to match incl sreed bed 10 mm thick in CM 1:4 .

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes.

Material and labour for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing type in slab flooring or in skrirting laid over brushing neat cement slurry with 3.0 Kg of cement per sq. meter and 20mm thick cement screed bed or bedding layer in CM (1:6) complete all as specified and directed.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to latest I. S

S&F pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

S & F pre painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

Taking down/Dismantlinig wrought iron or mild steel work of any description not otherwise proveded for.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates to Fe-290 (Gde E- 165) complete all as specified

Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames)

Taking down Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame)

S & F factory made Second class hard wood kiln seasoned and chemically pressure treated plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

S&F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides.

S & F Solid pvc Door Frame of size 100mmx45 mm made out of 5mm wood grain colour PVC Sheet reinforced with MS Square etc.

Supplying and fixing in frame at site, factory made solid panel pvc moulded door shutter 28 to 30 mm thick (style) with 2,4,or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.

S&F anodised aluminium frame for doors, windows, ventileters with one or more rebates including joining cleat for fixing etc complete all as specified in cl power coating above aluminium section.(minimum thickness of poweder coating 50 micron).

S&F for anodised window shutters, side hung type without sash bars aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips,ruber neoprene packing,anodised aluminium snap beading screws,anodised aluminium fittings such as peg stays 150 mm long(1 no),hinges type-B-21 100 mm long( 2 no) suitable handle 1 no complete all as specified incl power coating of any colour (thick ness of powder coating not less than 50 micron).

S&F for power coated aluminium (minimum thickness of powder coating 50 micron) work in doors, windows,venteleters, partitions ( fixed portion with extruded built up standared tubular sections/ appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixing with dash fasteners of required dia and size inclu necessary fillings up the gaps at junctions i;e top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechinically wherever required inclu cleat angle, Aluminium snap beadingfor glazing/ panelling, CP brass/ staineless steel screws as as per direction by Engr-in Charge.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi?chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.

M&L fixed in repairs for 12 mm thick pre laminated particle board, interior grade prelaminated one side with decorative choice lamination &other side balancing white lamination fixed in screws to timber frame work.

M&L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) as in hold fast.

S&F mild steel flat iron of size 50x3mm as in hold fast

Hacking out old broken glass ( any thick ness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and provoding and fixing new ones

S & F 3 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sq. M in each pane

S&F Stainless Steel wire netting with 1.40 nominal dia of wire with tinned tacks of stainless steel wire staples ,12 mm mesh size complete all as specified and directed.

S & F 100 mm long medium weight, cold rolled mild steel Butt hinges and fixed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section

S & F 300 mm long MS sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts .

S&F in repairs 10 Ltrs. Capacity PVC flusing cistern low level slimline or equivalen make / model with all accessories. complete all as specified and as directed

S&F in repair PVC long bend for low level cistern all as specified and as directed.

Repair to low level flushing cistern PVC or chinaware for making it fully functional and leakproff by replacing the defective parts as required complete all as specified and as directed

S&F soap dish holder fixed to plugs with chromium plated brass screws all as directed.Make- Jaquar(code-ACN-1131N)

S&F in repair mirror cabinet PTMT size 350x 445 mm complete all as specified and as directed

S&F in repair chromium plated telephonic hand shower with 1.5 mtr flexible tube & hook complete all as specified and as directed (Make: JAQUAR/PRAYAG/ESSCO).

S&F in repair 32mm waste coupling PTMT (half or full threaded) in basins , etc, with bedded n red lead cement and other end fixed complete all as specified and as directed

Supply only rubber washer to pillar cock, bib taps, stop valves, 15/20mm size as per the size and make suitable for the existing fitting complete all as specified and directed.

Supply and fix in repair stainless steel plate rack made out of size 750 x 600 x 230 mm fixed to wall complete all as specified and directed.

S&F in repair for wall mixer telephonic with "L" bend (Provn for overhead shower/hand shower) without popup waste system with 450 mm long copper pipe complete all as specified and as directed (Make: JAQUAR/PRAYAG/ESSCO).

S&F in repairs Vitreous China squatting pan "Orissa" patern size 630x450mm white with integral foot rest (Excluding flushing cistern & flush pipe)

S& F in repairs brass CP mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed.

S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including cutting for and pinning ends of brackets or erecting stand. complete all as specified and as directed

S&F in repairs plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device. complete all as specified and as directed.

S &F in repairs Vitreous china urinals, bowl typeflat back size 465 x 355x 265 mm whiten minimum with grating and union for discharge pipe , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws.

PVC connection 15 mm bore 450 mm long complete all as specified and as directed

Removing complete existing treatment incl pcc pedding of roof surfaces by picking, sweeping clean and washing down with water to remove dust etc.,

M&L for brushing neat cement slurry with 03 Kg of cement per Sqm complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 . (Internal water proof compound measured seperately)

M&L 25 mm thick cement concrete PCC Type B (0 1:2:4) using 12.5 mm graded aggregate. complete all as specified and as directed.

M&L for water proofing treatment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top including taking down existing treatment complete all as specified and directed. (i) Applying one coat of cold bituminous primer 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces. (ii) APP based polymeric membrane 3mm thick, minimum weighing 3.5 Kg/sqm, reinforced with polyester non woven fabric (weighing not less than 160 gms/Sqm) shall be applied over bituminous primer as specified above by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction and sealing the joints with application of cold bitumen. (iii) Applying two coats of aluminum paint over the APP membrance .

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed

M&L for 15mm thick plaster on fair faces of brick work or concrete surface in cm (1:4) with wpc @2% by weight face of conc work to wall surface and the surface is finished even and smooth without using extra cement. complete all as specified and as directed

M&L rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth. complete all as specified and as directed.

Supply only Integral water proofing compound complete all as specified and as directed.

Material and labour for applying One coats of oil bound distemper using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to areas and penetration of distemper on the surface complete all as specified and directed. Note – Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application.

M&L for preparation of wall surface incl for One coat water based premium acrylic smooth exterior emulsion i.e. Berger Weathercoat Long Life 10 (of approved colour) with PU & silicon additives, excellent dirt pick up resistance with low VOC less than 50 gram/litre as per the LEEDS specifications, Anti Algai properties in two coats @1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat of HS Seal-o-prime with Berger Pro spray 3.21 fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed.

Material & Labour for Preparation old decorated plastered surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint of approved camouflage pettern and colour by user having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surface, complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of ceiling and applying one coat of white wash, complete all as specified and as directed.

M&L for Preparation old decorated plastered surfaces of wall and applying one coat of cement base paint,using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS as in wall and complete all as specified and as directed.

M&L for Preparation old decorated plastered surfaces of wall and applying two coat of cement base paint,using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS as in wall and complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of old painted iron/steel surface , CGI/PGI steel roof sheets, over 10cm in with or girth and applying one coat of synthetic enamel roof paint complete all as specified and directed.

M & L for rendering in cement mortar (1; 3), 5mm thick as in ceiling finished even & Smooth w/o using extra cement, preparation of newly plastered surfaces of ceilings and apply three coats of white wash, complete all as specified and directed. complete and including taking down cement plaster including racking out joints, hacking for key scrubbing down with water etc including removal of rubbish material from site. all as specified and directed.

Material and labour for 15mm thick rendering in cement mortar (1:6) on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement including taking down cement plaster of any description, thickness and in any position including raking out joints, hacking for key, scrubbing down with water etc and Material and labour for preparation of new plastered surfaces and preparation of newly plasterd surface and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification over and including one coat of primer over newly plastered surfaces and 1mm thick wall care putty(POP) complete all as specified.

M&L for 15 mm thick rendering in CM 1:4 with and incl water proofing compound @2% by weight of cement including finishing the surface even and smooth without using extra cement, including taking down cement plaster of any description, thickness and in any position including raking out joints, hacking for key, scrubbing down with water etc and M&L for two coat of cement base paint over new plastered surface including preparation of surface complete all as specified and directed. (WPC shall be measured and paid seperately)

Markson (BID ID -3160543)

M/s R R Enterprises (BID ID -3160313)

Sunrise Enterprise (BID ID -3159466)

S M STORE (BID ID -3160997)

Satya Enterprises (BID ID -3160909)