RequiredExperience with Government
RequiredOEM Authorization Certificate Bid to RA enabled No Shorts - Sports ( 262 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) UTILITY Utility For Sports For Sports
RequiredFor Physical Training SIZE/DIMENSIONS Size Medium Small
RequiredMedium
RequiredLarge
RequiredX-Large Side Length with Waist Band 460mm (Medium) * Waist relaxed width 405mm (Medium) * Waist Stretched 580mm (Medium) * Hip 200 mm down from 570mm (Medium) * 1/6 waist Thigh at crotch 375mm (Medium) * Front rise including waist band 285mm (Medium) * Back rise including waist band 405mm (Medium) * Bottom hem Double needle lock stitched
Requiredmin depth 25mm * Side Pocket opening 180 * In seam 205 ( Medium ) * Minimum stitch per inch 9 * MATERIAL Body and other parts Any other material Blend as per buyer's requirements 100 % Polyester
Required100 % Nylon
Required100 % Cotton
RequiredPolyester- 65 % and Cotton- 35 %
RequiredPolyester- 65 % and Viscose- 35 %
RequiredAny other material/Blend as per buyer's requirements Any other material Blend as per buyer's requirements - * Mass ( gram per square meter ) 120 110
Required120
Required130
Required140
Required150 Count of Warp 60 * Count of Weft 120 * Mesh Lining No Yes
RequiredNo Mesh Lining composition Not Applicable * Mass of Mesh Lining ( gram per square meter ) Not Applicable 50
Required55
Required60
Required65
RequiredNot Applicable Mesh Lining - Netting Mesh Nos of Holes on base and bias within 625 square mm Not Applicable * Sewing Thread Polyester
Required( 145 dtex X 3 ) Polyester
Required( 145 dtex X 3 )
RequiredPolyester
Required( 125 dtex X 3 ) Embroidery thread Polyester * Width of Elastic band for waist 38mm * Technical requirements of No IS 9686 latest
RequiredNo 2/6 Elastic Band Draw Cord Polyester * Diameter of Draw Cord 4 * Slide Fastners for opening and Closing of Side Pockets No Yes
RequiredNo Technical Requirements of Slide Fastener Not Applicable IS 14181-2002 latest
Requiredmedium
Requiredclosed end
RequiredIS 14181-2002 latest
Requiredmedium
Requiredspecial
Requiredclosed end
RequiredNo
RequiredNot Applicable MANUFACTURING DETAILS Front Two panels joined at crotch * Inseam Five thread overlocked stitched * Mesh lining attached at waist and Leg opening No * Mesh lining stitching Not Applicable * Lining seams Not Applicable * Bartack Stitching ( Reinforcement Stitching ) at stress bearing areas No * Contrast panels attachement Not Applicable * Back parts Two Parts * Waist band stitching Stitched in two rows with chain stitch on the elastic * Tunnel at waist band Two holes stitched to allow the draw cord with insertion free movement * Waist Band Pocket No Yes
RequiredNo Size and material of Waist Pocket Not Applicable 7 cm X 12 cm
Requiredof Mesh Lining fabric
Required7 cm X 12 cm
Requiredfront side of mesh fabric and back side of base fabric
RequiredNot Applicable Side Pockets Two Side Pockets with Slide Fastener * COLOUR Colour of Fabric Any other colour/print as per buyer;s requirements * Other colour/Print ( - * 3/6 Other than colours mentioned above ) Sublimation Printing (For 100 % polyester only) Available Available
RequiredNot Available
RequiredNot Applicable Sublimation colour Any other colour required by buyer's * Other colour for sublimation - * Sublimation Print Finish Not Applicable * Colourfastness to Light ( IS 2454 ) - Base Fabric Not Applicable * Colourfastness to Washing ( IS/ISO 105-C10
RequiredTest- C (3))- Base Fabric Not Applicable * Colourfastness to Rubbing ( IS 766 )- Base Fabric Not Applicable * Colourfastness to perspiration ( IS 971 )- Base Fabric Not Applicable * Colour of Mesh Lining Any other colour as per buyer's requirements * Any other colour of Mesh as per buyer's requirements - * Colourfastness to Washing ( IS/ISO 105-C10
RequiredTest- C (3))- Mesh Lining Not Applicable * Colourfastness to perspiration ( IS 971 )- Mesh Lining Not Applicable * OTHER REQUIREMENTS Pilling Resistant (after 5 hours Test as per IS 10971 (Part 1))
Requiredmin 4 * Dimensional stability to washing
RequiredShrinkage or Elongation Percentage
Requiredmax ( IS 2977 latest)
Requiredin lengthwise and widthwise direction 1 1
Required2
Required3 LOGO AND MARKING Logo/Totem Marking As per buyer's requirements As per buyer's requirements
RequiredNo Type of Logo Not Applicable Embroidery
RequiredEmbossed
Required4/6 Printed
RequiredNot Applicable Numbers of Logos 1 1
Required2
Required3
RequiredNot Applicable Size
RequiredDesign and Location of Logo as per buyer's requirement - * TEST REPORT Availability of test report from NABL/ILAC accredited or central government lab to prove conformity of products to the specification No Yes
RequiredNo Test Report No - * Test report date (hint:) - * Name of lab - * Address of lab - * Test reports to be furnished to buyer on demand
Requiredif claimed to be available Not Applicable * ADVANCE SAMPLE Agree to provide Advance Sample(s) for buyer's approval before commencement of supply Yes Yes
RequiredNo
RequiredNot Applicable * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
