Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.6 LAccepted-AOC BIAMATHANG BAROO KARGIL J K | KARGIL | KARGIL | J K | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹15.5 L+₹59,995 (4.03%)Rejected-Finance 6 GURU GOBIND SINGH NAGAR DHAKOLI DHAKOLI PATIALA PUNJAB 140602 | PATIALA | PUNJAB | 140602 | L2 | Rejected-Finance NOT BEING L1 | |
| 3 | Rejected-Technical 159 RANBIRPURA TEH DRASS DISTT KARGIL PIN 194102 | KARGIL | LADAKH | 194102 | - | Rejected-Technical Not Enlisted Category a(ii) |
Tender Value
₹19 L
EMD Value
₹38,000
Closing Date
18 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE KARGIL
GE KARGIL LADAKH 194103
REPAIR CLEANING OF SEWAGE LINES SEPTIC TANKS, SOAKAGE WELL AT VARIOUS UNITS AT CHHANIGUND, HARDAS, KAKSAR AND APATI UNDER GE KARGIL.
2022_MES_524421_1
GE/K-11/2022-23
Open Tender
Civil Works
Item Rate
365 days
CHANIGUND KAKSAR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE KARGIL
₹38,000
Yes
26 Jul 2022
20 May 2022
20 Jun 2022
20 May 2022
18 Jun 2022
4 Jun 2022
60 days
Amount
Dewatering and cleaning of septic tank, incl removing water sludge with water, waste material from tanks/pits and depositing off the material to a distance n.exc. 200 mtrs and burrying in pits as directed by Engineer-in-charge and filling pits with earth (rate include labour for making pits and one labour daily report to AGE B/R-II office for any complaints).
Dewatering and cleaning of soakage well/ Soakage pits, and depositing off the material to a distance n.exc. 200 mtrs and burying in pits and filling pits with earth as directed by Engr-in-Charge (rate include labour for making pits and one labour daily report to AGE B/R-II office for any complaints).
M&L dewatering & cleaning of sokage well & septic tank using honey sucker/Sludge sucker with machine carring capacity 3000 ltr and depose off material all as specified and directed by Engr-in-Charge.
M&L cleaning of sewage lines and blockage by roding using bamboo split or by mechanical means from man holes to MH, Nanhi traps to gully traps, gully trap to man holes together with vertical stack pipes (where ordered) , cleaning eye to gully trap and taking out all debris, sludges or any solid / foreign materials from sewage line and removing the debries from site and flushing with water man hole to man hole & testing after cleaning complete for pipe line of dia 100mm/150mm/200mm all as directed.
M&L for cleaning of blockage/filled any type and cleaning of freezed water and accumulated sludge by heating method with blow lamps or any other method and roding the cast iron pipes 100mm bore/SGSW pipe 150mm bore upto soakage well without damaging the WC and pipe all as directed by Engr-in-Charge.
Dismantling of floor hearth and wall tiling including cement mortar bedding (but not backing) and removing serviceable like to store and rubbish off the premises., complete all as specified and directed by Engr-in-Charge.
Demolition of PCC (un-reinforced) in ground floors & pavings n.exc 15 CM thickness below or above ground level, complete all as specified and directed by Engr-in-Charge.
Demolition of RCC of any description and in any position including disposal of old materials to a distance exceeding 500 M but not exceeding 1.0 KM, complete all as specified and directed by Engr-in-Charge.
Demolition of brick or stone/block masonry built in cement mortar including all quions, arches, pillars etc., but excluding ashlar facings, dressed stone works and precast cement articles, complete all as specified and directed by Engr-in-Charge.
Demolition and breaking up PVC drain and like pipes any size complete all as specified and directed by Engr-in-Charge.
Taking up or down steel tubing & connections, including cleaning for re-fixing or removal to store of 15mm bore, complete all as specified and directed by Engr-in-Charge.
Taking up or down steel tubing & connections, including cleaning for re-fixing or removal to store of 20mm bore, complete all as specified and directed by Engr-in-Charge.
Non-skid coloured ceramic tiles, 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm, in floors etc, set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles, comp laid over including 15 mm thick screed bead in CM 1:4, complete all as specified and directed by Engr-in-Charge.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified. and directed by Engr-in-Charge
Excavation over area not exceeding 1.5 m depth and getting out in hard/ dense soil, complete all as specified. and directed by Engr-in-Charge
Excavation over area exc 1.50 m and not exceeding 3.00 m depth and getting out in hard/ dense soil, complete all as specified. and directed by Engr-in-Charge
M & L for cement concrete type D-2 1:4:8 (using 40mm aggregate) as in foundations, filling and mass concrete complete all as specified and directed by Engr-in-Charge.
M&L for Precast cement concrete type-C-1 block masonary with solid blocks 1:3:6 (using 20mm graded crushed stone aggregate) exc. 10cm in width and setting in cement mortar (1:6), complete all as specified and directed by Engr-in-Charge.
M&L for stone masonry walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, bulit in cement mortar 1:4, complete all as specified and directed by Engr-in-Charge.
Rendering 15 mm thick on fair face of brick work or concrete/stone surfaces in CM 1:4 finished even and smooth without using extra cement.complete all as specified and directed by Engr-in-Charge.
Returning, filling in excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25 Cm thick, , complete all as specified. and directed by Engr-in-Charge.
Removing surplus excavated soil to a distance not exceeding 100 m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified. and directed by Engr-in-Charge.
M&L RCC 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregate ) as in slabs supported on walls, beams and columns in floors, roofs, complete all as specified and directed by Engr-in-Charge.
Use & waste form work to soffits of suspended slabs, such as roof slabs, landings and similar work not exceeding 200 mm thick with rough finished flat surfaces of concrete, complete all as specified and directed by Engr-in-Charge.
Supply and fixing mild steel TMT bars 6 to 8 mm dia and over, cut to length , bent to shape required including cranking , bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire ( annealed ) not less than 0.9mm dia , complete all as specified and directed by Engr-in-Charge.
Supply and fixing mild steel TMT bars 10 mm dia and over, cut to length , bent to shape required including cranking , bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire ( annealed ) not less than 0.9mm dia , complete all as specified and directed by Engr-in-Charge.
Supply only water proofing compound ISI marked complete all as specified and directed
Precast reinforced cement concrete, type B-1,1:2:4 (using 20mm graded crushed stone aggreagate)as in manhole cover set in cement mortor 1:4 , complete all as specified and directed by Engr-in-Charge.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor of 110mm bore pipe complete all as specified and directed by Engr-in-Charge.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor of 160mm bore pipe complete all as specified and directed by Engr-in-Charge.
M & L for 100mm thick concrete bed to drain pipe in PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) including packing under and haunching against the sides of pipe after laid and tested for 100 mm bore, complete all as specified and directed by Engr-in-Charge.
M & L for 100mm thick concrete bed to drain pipe in PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) including packing under and haunching against the sides of pipe after laid and tested for 150 mm bore, complete all as specified and directed by Engr-in-Charge.
S&F in repair PVC (SWR) vent cowl 110mm in bore complete all as specified and directed by Engr-in-Charge.
S&F in repair PVC (SWR) bends any radius of 110mm bore complete all as specified and directed by Engr-in-Charge.
S & F in repairs stainless steel squatting pan of pattern “long pan”, size 580 x 440 mm standard ivory with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe).
S & F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including seat cover complete all as specified and directed by Engr-in-Charge.
S& F in repair one piece EWC with seat cover and fittings 100 WD, 710 x 370 x 745 mm, mordern curvy design with flushing efficiency 3.9/2.1 LPF, the shade of EWC approved by EIC, complete all as specified and directed.
S&Fin repir PVC low level flushing cistern 10 Ltr capacity with & including brackets for fixing to walls complete and PVC flush pipe of LDPE pipe of pressure rating 6 kg (f)/ sq.cm , all as specified and directed , fixed in repairs.
S & F in repairs for 15 mm pillar taps,cast copper alloy fancy type with chromium plated screwed down,screwed for iron pipe or for fixed in repairs.
S & F in repairs urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.
S & F in repairs stop valves suitable for 15 mm bore iron pipe, cast copper alloy, chromium plated, screwed down, high pressure, fancy type, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repairs Bib taps15 mm bore,fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for brass ferrule and fixed in repair, complete all as specified and directed by Engr-in-Charge.
S&F Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and directed by Engr-in-Charge.
S&F Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and directed by Engr-in-Charge.
S&F 16mm dia 3-layer PP-R ( Polylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc., complete all as specified and directed by Engr-in-Charge.
S&F 20mm dia 3-layer PP-R ( Polylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc., complete all as specified and directed by Engr-in-Charge.
Note : Deduction for amount of Rs 23,820.00 as listed in Schedule A Part - II ( Schedule of Credit) shall be made while awarding of contract.
JP AND CO.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .