SPECIAL REPAIRS TO BLDG NO 123 (OTM) AT MIL STN NAHAN UNDER GE CHANDIGARH.

Amount

Demolition of brickwork or stone/boulder masonary, built in cement mortar including quoins arches, pillers etc, but excluding ashlar facings, dressed stone work and precast concrete article built in cement mortar or cement lime mortar

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for incl cutting of reinforcement as required to facilitate demolition

Dismantling plain or corrugated steel sheeting, any gauge, thickness, incl nainital or similar pattern roof covering complete all as specified and as directed

Taking down chowkats or frame exc 1.5sqm but n.exc 4 sqm each(without taking shutter from the frame) with all fittings

Taking down chowkats or frame n. exc 1.5sqm each(without taking shutter from the frame) with all fittings.

Taking down cement plasters on brick or conc surfaces incl racking out joints, hacking for key all as specified.

Demolitioin of cement conc in ground floors and pavings n.exc 15cms thickness (below or above GL).

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing tiles and rubish off the premises

M&L for 75 mm thick cement concrete type C-2, 1:3:6 using 40mm graded crushed stone aggregate as in plinth protection, finishing the cement concrete surface even and smooth without using extra cement.

Forming contraction (dummy) joints 25 mm deep x 10mm wide, filled with sealing compound Grade A

S&F straight edge (joint free) non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but n exc 0.11 sqm, in floors etc.in any colour or pattern, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6.

M&L Glazed ceramic coloured,,tiles 450x350x6-7mm thick in vertical surfaces such as skirting,dados and risers to steps over and including 10mm thick in CM (1:4).

M&L Plain cement concrete (1:4:8), type D-2, using 40 mm graded crushed stone aggregate as in foundations, filling , mass concrete and sub base.

M&L for machine cut kota stone slab flooring 18-20mm thick over 20mm thick cement screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

All as per above item No 14 above but on vertical surfaces over 15mm thick cement mortar backing coat in CM 1:4

Black Granite stone ,20 mm thick as in kitchen platform incl rounding or bullnosing the exposed edges over 15 mm thick screed in CM 1:3

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and as directed by Engr-in-Charge

Demolition and breaking up drain pipe 150mm bore salt glazed stone ware/AC/PVC pipe complete all as specified.

Cement concrete (1:3:6) type C2 using 40mm graded crushed stone aggregate as in bed to drain pipes 150mm bore including packing under and haunching against the sides of pipes after laying and testing complete all as specified

150mm dia UPVC pipes laid in trenches on concrete bed to required slope jointed complete all as specified.

M&L 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc, (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.

Dismantling mild steel work of any description not otherwise provided for in any location and any position

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Hard soil

Returning and filling in including spreading leveling watering and well ramming in layers not exceeding 25 cm thick using soft/disintegrated rock all as specified and as directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces , finished even and smooth without using extra cement on walls in cement mortar 1:4, (with WPC) complete all as specified and as directed by Engr-in-Charge (WPC will be measured and paid for separetely).

Rendering 15 mm thick on brick work or concrete surfaces, finished even and smooth without using extra cement on walls in cement mortar 1:6, complete all as specified and as directed by Engr-in-Charge

M&L Rendering 10 mm thick cement plaster in CM (1:3) on ceiling surfaces finished and smooth without using extra cement.

M&L Rendering 10 mm thick cement plaster in CM (1:4) on roof surfaces finished and smooth with water proofing compound without using extra cement (WPC will be measured and paid for separetely).

S&F in repair vitreous china (white colour) oval shape or any other shape wash basin to be fitted in the granite stone and ceiling it with white cement

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed

Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) with old size bricks.

M&L RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in , beams cantilevers,column,bressummers lintels over 1.5m span

M&L RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in slabs supported on walls, roofs, chhajjas, landings, shelves and the like

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works etc not exc 200mm thick, horizontal or sloping for rough finished surfaces of concrete

TMT bars 10mm dia and over cut to length , bent to shape required including , cranking hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete.

TMT bars 5mm dia and over upto and incl 10mm cut to length, bent to shape required including, cranking hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips as in stirrups, spacers, binders etc complete.

M&L stone walling built in CM 1:6 of random rubble uncoursed, well bonded, dolidly hearted built in retaining walls, abutment and sililar work but except stone. (Stone recived from item No-01)

M&L stone walling built in CM 1:6 of random rubble uncoursed, well bonded, dolidly hearted built in retaining walls, abutment and sililar work.

Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of steel Fe-410- W(Gde-E-250) quality-A

Framed work such as grills,gratings,etc..with ends of bars shouldered and/or riveted,or forged into spikes,framed guard bar,con-forming to Fe.290.Gde-E-165

S & F in repairs factory made box type steel windows steel frames 80mmx60mm(peripheral) and 80mm x75mm(internal members)made out of cold rolled 1.25mm thick sheet having steel window/ventilator shutter of MS tabular section of size 50mmx20mmx1.1mm thick fixed with box type hollow tabular section beading of glazed and wire shutter handle of 100mm size made out of Z-section 02 Nos M stove enameled black tower bolt of size 120mmx 2 Nos, 150mm mild steel hooks and eyes including a shop coat of primer fixed in repairs all as specified and directed by Engr-in-Charge.

All as per above item No 42 but without glazing bar

M&L for Preparation and applying two coast of synthetic enamel paint (Ordinary tint) over new steel surface of any description, Over 10 cm in width or girth and on already primed surfaces

S&F Hand rails, Wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-16

S&F pressed steel frame 125x60mm for door with oneor more rebate including necessary fixing lugs,hinges.lock strike plate etc as specified supplied and fixed.

PCC type C-0 (1:3:6) using 12.5mm graded stone aggregates as in filling of MS sheet chowkats, complete all as specified

M&L for 35mm thick 2nd Class hard wood panelled shutters (03 Nos of panels), with panels of timber flat on both sides (feather edged), supplied and fitted to chowkats all as specified

M&L for preparing new surfaces of wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint over priming coat.

M&L Rendering 15mm thick cement plaster in CM (1:4) on brick or conc surfaces finished and smooth without using extra cement with water proofing compound.

Two coats of acrylic distemper/ distemper oil emulsion (OBD) on old wall surfaces including complete removal of existing treatment and all necessary preparation with and incl priming plastered surface with alkali resistant primer over 1mm thick wal care putty, complete all as specified.

All as per item No 51 above but on ceiling surfaces

M&L for preparation and applying two coats of exterior grade acrylic emulsion paint over a coat of primer on new / completely cleaned wall surfaces in any pattern complete all as specified and as directed by Engr-in-Charge.

One coats of white wash on ceiling on old wall surfaces including all necessary preparation and wetting and curing, complete all as specified.

Complete removal of existing treatment from wall / ceiling surfaces including rubbing, grinding, water jetting etc complete all as specified and as directed .

M&L for preparation and applying two coats of white wash on new surfaces of ceiling complete all as specified and as directed by Engr-in-Charge.

S&F 1st class soft wood moulded hand rail 75mm x 60mm rounded or shaped with splayed faces in straignt lengths and fixed

S&F in repair concealed type stop cock chromium plated with long shank and cup

Taking down CI soil waste or vent pipe 100mm bore including all fittings like trapes,bends,junctions etc from any situation complete all as per specified and as directed

Taking down CI soil waste or vent pipe 75mm bore including all fittings like trapes,bends,junctions etc from any situation complete all as per specified and as directed

S & F 110MM PVC SWR Pipes single socketed, in any length with rubber ring joints, fixed to wall laid in trenches or in floors.

S & F 75 MM PVC SWR Pipes single socketed, in any length with rubber ring joints, fixed to walls laid in trenches or in floors.

S & F 110MM PVC SWR Bends any radius

S & F 75 MM PVC SWR Bends any radius

S & F in repair 75MM PVC (SWR) floor trap, plain with grating including jointing with solvent cement

S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed

S&F 150 mm Extruded aluminium alloy handles, fabricated type, anodised

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

Brick work with sub class 'B' bricks half brick thick straight or curved on plan to any radius in half brick walls built in CM(1:4).

S&F factory made solid PVC Door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforcved with MS sqyare tube in opening as per specified.

S&F factory made solid panel PVC Door shutter 30mm thick (stiles)consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain cover PVC 'C' channel having PVC strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rails on either side & as gap insert for top rail & bottom rails, panelling of plain colour PVC sheet to be the fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification and drawing.

S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21

Disconnecting existing tanks , setting aside (or lowering if required) for repair, cleaning, etc. and hoisting if required reconneecting and refixing in position (Cleaning repairing etc measured separately) exc 500 & n.exc 1000 ltr in capacity complete all as specified

S & F Pressed steel frames 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

S & F 4mm sheet glass ordinary quality and glazing with oil putty or in aluminium frame work in squares/rectangles n exc 0.5 sqm in each pane

All as per item No 76 above but figured/froasted/pin headed type

Dismantling old/existing wooden cupboards embeded in stone masonry, taking out all wooden menbers from masonry incl all necessary items of work complete all as specified and as directed incl making good/match the existing surface.

Dismantling existing waterproofing reatment hessian cloth base or APP membrane removal of debris from the site and depositing where directed

Dismantling of brick tiles or terrace tiles single layer on roofs

Demolition of mud in roofs, any thickness including plastering, making arrangement for getting the same from 2nd floor roof slab to the ground and removal of the same to the location as directed upto 1.50 Km

M&L for providing PCC 1:2:4 type B1 using 20mm graded stone aggregate as in roof padding rounded or chamfered complete all

M& L for preparation of plaster surfaces of roof and applying following courses of roof treatment including taking down hassen cloth, cleaning the area, complete all as described :- (a) Applying evenly compacted Bitumen primer @ 0.50 Kg/Sqm. (b) Laying of 3mm thick APP based polythene membrane min weight 3KG/sqm by torching method with 100mm side and end lap and cutting groove in stone / brick wall and inserting membrane at end, making good with cement mortar 1:3 or as per manufacture instructions. (c) Applying aluminium paint @ 0.10nKg/Sqm on APP membrane roof treatment.

M & L honey comb brick work in one brick thick construction with subclass 'B' bricks straight or curved on plan exc 6mm mean radius built in CM 1:6 including soakage wells

S&F in repair Chromium plated brass 2 in 1 health faucet with hook 1mtr tube

S & F in repair vitreous china wash down water closet pan (pedastal pattern) white (exclusing fixing bolts, flushing cistern and flush pipe)

S&F in repair 20mm dia SS 304 curtain rod including brackets, decorative balls/caps on both ends of curtain rods with comp fittings

S&F 1000 Ltr capacity Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified

S&F in repair 15mm dia Ball brass valves high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

Supply only liquid water proofing compound.(Make- Bostik, Dr fixit, Fosroc, or Equivalent)

S&F in repair Pillar tap mixer (centre hole mixer), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15 mm bore iron pipe and fixed.

S&F in repair 15mm dia bib taps CP brass,fancy type,long body, screwed down, screwed for iron pipe.

S&F in repair 15mm dia Angle cock chromium plated brass fancy type, screwed down , high pressure, scrwed both ends for iron pipe.

S & F Galvanised mild steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed stainless steel wire staples

Cutting chases in stone wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

15mm GI tubes medium grade with all fittings & fixed complete to walls or ceilings or laid in floors.

20mm GI tubes medium grade with all fittings & fixed complete to walls or ceilings or laid in floors.

25mm GI tubes medium grade with all fittings & fixed complete to walls or ceilings or laid in floors.

Taking down steel water tubing 15mm to 25 mm with all fittings from walls, ceiling and floors, complete all as specified.

Brass chromium plated Tubler towel rail, 20mm dia, D type, 60cm long between flange

S&F in repair 5.00mm thick glass corner shelf set (Each set consiting of three pieces) having stainless steel perimeter border all as specified and as directed by Engineer-in-Charge.

Cement concrete type B -1, 1:2:4 (20mm graded crushed stone aggregate) 25 mm thick, all as specified and as directed by Engineer-in-Charge.

M&L providing for PCC 1:3:6 Type C-1 using 20mm graded crushed stone aggrgate as in coping ,apex stone,

Cement concrete in surface channels and drains in cement concrete 1:3:6 type C1 (20 mm graded crushed stone aggregate)

Extra for forming fair finished drain or channel 60 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.

S&F in repairs 4.0mm plain mild steel wire, galvanised class 3 in detached works such as for mosquito nets and fixing to staining bolts, hooks and eyes etc complete

Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cum per sqm

Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m

M&L for cutting, grinding and mirror polishing of Kota stone in any position and in any location

S&F PVC (SWR) 'P' trap 125/110

S&F PVC (SWR) 'S' trap 125/111

M&L for preparation and applying one coat of synthetic enamel paint over old painted steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, complete all as specified and as directed by Engr-in-Charge.

S&F Brass chromium plated shower rose 125mm size,with complete fitting

S&F in repairs 10 ltr capacity PVC vlaveless syphonic action type flushing cistern low level,white with inlet ball valve,float and handle including brackets.

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including ,fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. all as specified and directed.

Taking down MCB DB of any size and disposal under schedule of credit and making good disturbed surfaces all as specified and directed.

Taking down old unserviceable light fittings any type and removal from site and making good disturbed surfaces of walls, ceiling etc complete all as specified and directed by Engineer-in-Charge to match with existing surface all as directed.

M&L for point wiring using approved colour coding as per IS ( for Phase and neutral) with copper conductor 1.5 sqmm ( Cross sectional area) single core multistranded FRLS ,PVC insulated and unsheathed cable 1100 volts grade,conforming to IS drawn and including PVC concealed coduit with fittings ISI marked ,terminated in modular switch boxes incl 1.5 sqmm (cross sectional area ) single core ,multistranded ,FRLS PVC insulated and sheathed cable as earth continuity conductor connected to earth dolly for one light point control by one way switch complete all as specified and directed.Note: 1.colour code of wiring should be ( for phase ,red,neutral ,black & earth wire green) 2.Modular switch sockets fan regulators shall be measured and paid separately under respective items deemed to be included in the quoted rates.

All as per item No - 119 above but for one ceiling fan/exhaust fan point.

All as per item No - 119 above but for one 3 pin 5 amp socket on same board all as directed.

All as per item No - 119 above but for one 3 pin 5 amp socket on indipendant board all as directed.

All as per item No 119 here in before but with 4 sqmm copper conductor for 15 amp socket with 4 sqmm earth continuity conductor Note : Make of cable for item No 119 to 123 Finolex/Havells/Plaza and Make of conduit for item No 119 to 123 Finolex/Supreme/Prince/BEC

S & F in replacement of Sub main wiring with PVC insulated, FRLS cable 2 single core 6 Sq mm 1100 V grade with stranded copper conductor on and incl PVC rigid non metalic conduit (ISI marked) in concealed incl all specials like joint, elbow , Tee ,junction , bend etc and provision of PVC insulated copper conductor single core 4 sq mm for earth continuity conductor including taking out UNSV sub main wirng alongwith conduit and accessories complete all as directed.Note: Two run of 6 sqmm and one run of 6 sqmm earth continuity conductor shall be measured as one unit.Make of cable :- Finolex/Havells/Plaza and Make of conduit Finolex/Supreme/Prince

All as per Item No-124 above but 4 single core 6 Sq mm,one single core 4 sq mm for earth continuityconductor complete all as directed by Enginer-in-charge .

All as per Item No-124 above but 2 single core 1.5 Sq mm,one single core 1.0 sq mm for earth continuity conductor complete all as directed by Enginer-in-charge .

S & F of Modular snap switch SP, one way ,5/6 Amps suitable for 1 Module complete all as specified and directed.

S & F of Modular socket 5 pin, 5/6 Amps suitable for 2 Module complete all as specified and directed.

S & F of Modular snap switch SP one way ,15/16 Amps suitable for 1 Module complete all as specified and directed.

S & F of Modular socket 5/6 pin ,15/16 Amps suitable for 2 Module complete all as specified and directed.

S&F of Modular blanking plate suitable for 1 Module complete all as specified and directed.

S & F of Modular Fan step Regulator electronic, 120 watts, 2 Module complete all as specified and directed.

Supply and fixing of Modular Indicator lamp, 2 Module size complete all as directed.

S & F of Modular white cover plate incl Modular base frame & powder coated Modular sheet metal concealed box for 12/8 module complete all as specified and directed.

All as per Item No-134 above but 6 module complete all as specified and directed.

All as per Item No-134 above but 3 module complete all as specified and directed.

All as per Item No-134 above but 2 module complete all as specified and directed.

S & F of ceiling rose surface backalite 65mm x 50 mm, two to three terminals complete all as specified and directed. Make :- Anchor/Bajaj/Philips

Supply and fixing of lamp holder insulated body with back plate suitable for any type of fitting incl one No. of LED bulb 18 watt (Base-22 retrofit type) complete all as specified and directed. Make :- Havells/Plaza/Legrand/Anchor/Roma/SSK

Supply and fixing of Indoor Decorative LED box type suitable for fixing ceiling/wall with aluminium base directly retro fit LED tube Light , 22 watt, , Color: Cool day light 4 ft white Operating Voltage: 140-270 volts complete with all accessories internally pre wired and including up with three core PVC copper flexible cable of size 23/0.0076 from ceiling rose to connector block complete all as specified and directed LED batten & LED tube rod shall be of same brand. Make :CG/Philips/Havell's/Halonix.

Supply and fixing of LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. complete all as specified and directed. Make :Halonix Model No:HLBH-15-10-CW-INV or equivalent in CG/Philips/Havell's.

Supply and fixing of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC,decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing of 25 watt LED batten with opal diffuser ,IP20, battery backup upto 4 hrs.Fitting should have inbuilt 2 No's of Li-on battery of 2600mA each.Housing of fixture should be of extruded aluminium Efficacy of fixture >100LPW,P>F>0.9,THD<30% complete all as specified and directed.Make: Halonix Model No: HLB-08-25-CW-INV or Equivalent in Crompton Greaves,Bajaj,Philips,Havell's.

Supply and fixing of 60 watt LED inverter RTC(street light with inbuilt RTC (Real Time clock) for Auto on/Auto Off. Housing made of Pressure die cast aluminium ,top maintainable and with clear heat resistant toughned glass , have secondary lens for better optics, should have LM80 certified LED of CREE,NICHIA, OSRAM,SEOUL make only with constant current RTC enabled electronic driver with 5KV SPD,IP66. Street light shall have inbuilt Li-on battery of 5200mAH and shall have>1.5 hrs battery backup at inverter load in case of power failure,Efficacy > 100LPW,CRI>70,THD<10%,PF>0.95,cut off voltage at 300 Volt + 10% and suitable for 50mm mounting GI Pipe complete all as specified and directed.Make: Halonix Model No: HLSLD-ML04-60-CWL-INV-RTC or Equivalent in Crompton Greaves,Bajaj,Philips,Havell's..

Supply and fixing of security light fitting bracket made up of 40 mm dia medium grade pipe of length 0.9 mtr with bending in shape by hot or cold method with 2 nos 50x4 mm MS flate clamps with nut bolts and washer etc all as directed

Supply and fixing of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, MCB DB 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc flushed on the existing wall , to match with existing surface and making all necessary connections complete all as directed.Make : L&T / Legrand Lexic Hager/Havell's/Indo Asian.

All as per item No: 146 here in before but TPN 04 way, 415 volts complete all as directed.

S & F of Isolator TPN 63 Amps, 415 volts complete all as specified and directed.Make : L&T / Legrand Lexic Hager/Havell's/Indo Asian.

All as per item No: 148 here in before but isolator DP, 63 amp, 230 Volt.

S & F of isolator SP, 6-40 Amps, 230 Volts complete all as specified and directed.Make :L&T / Legrand Lexic Hager/Havell's/Indo Asian/ABB.

M&L of blanking plate suitable for MCB DB's SPN/TPN complete all as specified and directed.Make :L&T / Legrand Lexic Hager/Havell's/Indo Asian.

Earthing complete with Galvanised steel earth plate electrode of size 60cmx 60cm x 6mm thick electrode buried directly in ground (earth pit not less than 2.25 meters deep below the normal ground level) with top edge of the plate not less than 1.5 m below normal Ground Level connected to GI earth wire 4 mm dia by means of bolts, nuts, check nuts and washers and earth lead protected by 15mm dia GI pipe medium grade connected to main distribution board/ earthing test point all as shown on electrical plate No-03 of SSR Part-1 and all as specified including testing on completion.Note: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bars @ 150mm c/c both ways , GI funnel with watering pipe 20 mm dia, wire mesh, salt and charcoal, protection pipe for earth lead upto 7.50m long complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified in SSR part-II earth lead wire and protection pipe beyond 7.5m shall be measured and paid separately.

M & L for Brick protection for LT cable with sub class "B" bricks laid dry and flat abutting each other with gaps between adjacent bricks not exceeding 10mm with width equal to length complete all as specified and directed by Engr-in-Charge

M & L for sand cushioning to PVC under ground cable with screened and washed sand and punning to provide a required cover.

Supply and laying of GI tubing, light grade, 50 mm bore dia as cable protection fixed on walls/poles/laid in trenches complete including dismantling corroded GI pipe all as specified and as directed.

Supply and fixing in replacement of GI Pipe medium grade 80 mm bore inclusive of all fittings such as tees bends, elbows, reducer, bell mouth tube ends and all fixing accessories such as couplers hook, nuts, saddlers, pipe hook etc (8.0 meter long) complete with GI base plate, finial taper plug, bolts, nuts & screws etc including making the holes on the pole (bottom and top) suitable size for drawing of wire 1.5 sqmm 3 core round flexible for connection of security light fitting from junction box to light fittings including of one primer coat, one under coat and one finishing coat of silver paint including dismantling/taking out old unserviceale one all as specified and directed. Make : Prakash /Tata/Jindal.

Supply, laying , jointing ,testing and commisioning LT underground cable 1100 volts grade XLPE insulated and steel strip or wire armoured heavy duty with multistranded aluminium conductor 25 Sqm 4 core size including all the fixing arrangement,making all incoming and putgoing connection to be properly fitted with lugs/thimbles incl taking out unserviceable complete all as specified and directed.Make: Grandly/Finolex/Havells/Plaza Note:- (i) Excavation and earth work cable protection and sand cushioning shall be measured and paid seperately .

Taking down and re fixing the existing water geyser/ Ceiling fan/exhaust fan any type and any size after necessary servicing/greasing complete incl painting all as specified and directed by Engr-in-Charge to match with existing surface complete all as specified and directed.

Material and labour for road / path way any type (Concrete) cutting , including excavation, returning filling in, spreading, leveling, well ramming in layers, soiling with broken boulders/ stones, WBM 7.5 cm thick coarse aggregate received from dismantling the existing road, premix, carpeting 25 mm thick using ready mix patch mate material, rolled and compacted for road patch repair work, complete all as directed.

Meterial and labour for cement concrete in foundations for pole coping or any other work type B0 1:2:4 with 12.5mm graded crushed stone aggregate all as directed

Supply and fix in replacement of Junction box made out of thermo plastic material of size 240mmx130mmx110 mm with provision of single phase cable connector incomming and out going with MCB SP 6-32 amps for security light fitting/PTL IP 65 protection totally enclosed weather proof with cable entry along with GI clamps nut bolts & washer fixed on pole including dismantling/taking out old unserviceale one all as directed.

Supply and fixing of Exhaust fan 300 mm sweep heavy duty complete with self closing MS louvers, mounted in suitable opening arrangement and suitable for operation on 230/240 Volts single phase, 50 Hz,1400 RPM , AC supply with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm and making all necessary connection and fixed by using 4 Nos 100 mm long 10 mm dia bolts, nuts and washers and grouted in wall in CM 1:3 (including opening of wall etc) completed all as directed. Make: Usha/Havells/Bajaj/Orient .

Supply and fixing Water heater (Geyser) Storage type , vertical type 5 star rating electric 230 volts AC,50 Hz capacity 50 ltrs with 15 Amps plug top fixed on wall by means of anchor fastners-04 Nos ,12mm dia and 150mm long grouted into wall and making good the disturbed surfaces with existing finishes complete all as specified and directed.Make: Havell's/Usha Luxus/Crompton Greaves/Venus.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and ccessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) ® with provision of cable PVC insulated and sheathed FRLS grade 3 core 1.0 sqmm copper conductor flexible wire 1100 volts grade from porcelain connector /ceiling rose to ceiling fan complete all as specified and directed.Make:USha/Havell's/Crompton Greaves. Note: The UNSV old one Item Srl No 162 to 164 is MES property and will be deposited in MES Store Yard of Nahan.

Meterial and labour for cement concrete in foundations for pole or any other work type C2 1:3:6 with 40 mm graded crushed stone aggregate all as directed

M/S SHANTI SARUP DINESH CHAND

M/S MANI GARG CONTRACTOR