Repair and Interior work at 1st Floor of Mrittika Building including Supplying Furniture at the Chamber of Additional Secretary and Joint Secretary Chamber under PRD Department during the year 2024-25

Amount

Building Works

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (i) With 1:6 cement mortar, (b) 20 mm thick plaster.In 1st floor

Supplying wooden moulding slanting beat of size 37mm X 18mm (finished) of approved design to finish the joint between wooden frame of door/window with masonary in true line and level fitted & fixed with adhesive and head less pins complete as per direction of Engineer -in-charge. a) Teak wood beat

Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick).In 1st floor

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (a) One Coat i) Water based interior grade Acrylic Primer

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty : (Two coats) ii) Luxury Quality

Painting with ready mixed red lead paint of approved make and brand :(a) One coat

Supplying, fitting & fixing of Aluminium fixed partion wall of all aluminium sections viz top, bottom and side member, intermediate member, glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868-1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium fixed partition wall with glass / panel board all complete as per architectural drawings and direction of Engineer-in-charge. (Excluding cost of glass/ panel board, 10-12 Micron thickness Annodizing film. Natural white.b) For unsupported length of vertical member above 1.50m. height of both ends of vertical member restrained but panel above 0.90 sqm

Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] In 1st Floor(iii) 9mm

Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-in-charge.The rate includes the cost of labour, adhesive and all incidental charges thereof. In ground floor.Glossy/Matt/Suede excluding surface texture or metallic lustre.(i) Thickness of laminate 1.5mm

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. xiii) 12mm thick cleared toughened glass coforming to IS: 2553-1992(Part-II)

Washing and cleaning with soap water and rubbing with oil cloth in all types of floor and dado.

Anodised aluminium barrel / tower / socket bolt (full covered) of approvedmanufactured from extruded section conforming to I.S. 204/74 fitted and fixedwith cadmium plated screws:(vii) 225mm long x 10mm dia. bolt.

i) Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete.(a) Heavy type (I.S.I. size 3)

(ii) Door stopper (Anodised aluminium)

Sanitary & Plumbing Works

(d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).

d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.

Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete.(a) E.W.C. (iv) Bestolite (solid type) white

Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.(ii) 600 mm X 450 mm

Supplying, fitting and fixing liquid soap container.(c) Fibre glass

Furnitures

Supplying and placing in position Main table of the following specifications.The Main table shall be of size 2400 Width mm x 900 mm Depth x 750 mm height. Top surface of the table shall made up of MDF (Medium density fibre ) board duly finished with Veneer and final coating of PU. The Main desk should contain in built key board pull out tray for keeping keyboard of computer. The front modesty panel of the table shall be made up of MDF board of size 1640 mm x 600 mm x 16mm which shall also be duly finished with Veener and PU coating. For personal storage one mobile pedestal (3 drawer unit) shall be provided of size 510 mm Width x 635 mm Height and 445 mm Depth. The storage pedestal shall also be made up of MDF duly finished with veener & final coating of PU. The Side shall be of size 1200mm Width x 445mm Depth x 660 mm Height. The side unit shall be made up of MDF board duly finshed with Veneer and final finish by PU Coating. The design of the side unit shall be such that it can be placed on either side of the main table. The side unit shall contain open space for keeping cpu in extreme right side, one closed storage shutter at extreme left end & open space in the middle with one shelf for keeping files. The thickness of the top of the side unit shall be 25mm. The manufacturer should have ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (all ISO must be from IAF recognised accreditation body), BIFMA (membership), AIOTA, Greenguard (by UL), GRIHA, Indian Design Mark, BIFMA Level-2, Indoor air quality certification.

Supplying and placing in position Back unit of the following specifications. The Size of the Back unit shall be 2215mm width x 410 mm Depth x 2000mm height. The back unit shall be made up of MDF board duly finished with veneer & final finish by PU coating. Below storage shall be provided with wooden shutters & the upper left & right side of the back unit shall also be provided with wooden shutters. The middle 3 door shutters should be of glass of minimum 5mm thick for display purpose. The hardness of the PU coating shall be 1.5H. The manufacturer should have ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (all ISO must be from IAF recognised accreditation body), BIFMA (membership), AIOTA, Greenguard (by UL), GRIHA, Indian Design Mark, BIFMA Level-2, Indoor air quality certification.

Providing, supplying and placing of High Back Chair. SEAT ASSEMBLY: The seat is made up of 1.5±0.1 cm thick hot-pressed plywood upholstered with fabric and moulded polyurethane foam. SEAT SIZE: 51.8cm (W) x 49.7cm (D). BACK ASSEMBLY: The Back is injection moulded in glass filled Polypropylene which is 2 upholstered with Mesh fabric. The back consist of adjustable Lumbar support made of injection moulded Polypropylene having an adjustment of 5.0 10.1 cm. BACK SIZE: 47.9 cm(W) x 66.9 cm (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m and hardness 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS (ADJUSTABLE):The height adjustable armrest is made of Polypropylene and can be adjusted to 6.010.1cm height it also has swivel and To and Fro adjustment with moulded PU armtop. ACTIVE BIO-SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features: 360° revolving type, Front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfort, Till tension adjustment can be operated in seating position, 5-position Tilt limiter giving option of variable sit angle to the chair. Seat/back tilting ratio of 1:2. The mechanism housing is made up of HPDC Aluminium & black powder coated (DFT 40 to 60 micron). HEADREST: The Headrest sub-assembly is made up of injection moulded glass filed Polypropylene which is upholstered with moulded HR polyurethane loam and fabric has an adjustment of 3.00.1cm & it is assembled over GRETA 20F The complete headrest assembly is retro fic to the main chair. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with an adjustment stroke of 10.0±0.3cm. PEDESTAL ASSEMBLY: The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia is 166.1±0.5 cm.(76.1 ± 1.0 cm. with castors). TWIN WHEEL CASTORS: The twin wheel castors are Injection moulded in black Polyamide having 6.01 0.1cm wheel Diameter. WIDTH (W) - 76.0cm. DEPTH (D) - 76.0cm, HEIGHT (H) - 114.0 cm- 123.5cm, SEAT HEIGHT - 43.5 - 54.0cm. The manufacturer should have ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (all ISO must be from IAF recognised accreditation body), BIFMA (membership), AIOTA, Greenguard (by UL), GRIHA, Indian Design Mark, BIFMA Level-2, Indoor air quality certification.

Providing, supplying and placing of High Back Chair. SEAT ASSEMBLY: The seat is made up of 1.5±0.1 cm thick hot-pressed plywood upholstered with fabric and moulded polyurethane foam. SEAT SIZE: 51.8cm (W) x 49.7cm (D). BACK ASSEMBLY: The Back is injection moulded in glass filled Polypropylene which is 2 upholstered with Mesh fabric. The back consist of adjustable Lumbar support made of injection moulded Polypropylene having an adjustment of 5.0 10.1 cm. BACK SIZE: 47.9 cm(W) x 66.9 cm (H). HIGH RESILIENCE (HR). POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m and hardness 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS (ADJUSTABLE):The height adjustable armrest is made of Polypropylene and can be adjusted to 6.010.1cm height it also has swivel and To and Fro adjustment with moulded PU armtop. ACTIVE BIO-SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features: 360° revolving type, Front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfort, Till tension adjustment can be operated in seating position, 5-position Tilt limiter giving option of variable sit angle to the chair. Seat/back tilting ratio of 1:2. The mechanism housing is made up of HPDC Aluminium & black powder coated (DFT 40 to 60 micron). PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with an adjustment stroke of 10.0±0.3cm. PEDESTAL ASSEMBLY: The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia is 166.1±0.5 cm.(76.1 ± 1.0 cm. with castors). TWIN WHEEL CASTORS: The twin wheel castors are Injection moulded in black Polyamide having 6.01 0.1cm wheel Diameter. WIDTH (W) - 76.0cm. DEPTH (D) - 76.0cm. HEIGHT (H) - 114.0 cm- 123.5cm. SEAT HEIGHT - 43.5 - 54.0 cm. Quality Certification: The manufacturer should have ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (all ISO must be from IAF recognised accreditation body), BIFMA (membership), AIOTA, Greenguard (by UL), GRIHA, Indian Design Mark, BIFMA Level-2, Indoor air quality certification. The manufacturer should have ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (all ISO must be from IAF recognised accreditation body), BIFMA (membership), AIOTA, Greenguard (by UL), GRIHA, Indian Design Mark, BIFMA Level-2, Indoor air quality certification.

Overall Dimensions of TDU shall be 900mm(W)x470mm(D)x1169mm(H) . The construction shall be Rigid Knock Down construction .All major panels -0.7 mm thick CRCA, False side panel - 0.9 mm thick ,Bottom Shelf - 0.8 mm thick CRCA sheet .Vertical Handle sections for shutters : 0.9 mm thick CRCA sheet . CRCA D Grade as per IS -513 .The Shutters shall be PVC shutters.Also there shall be 2 adjustable shelves for 1169 H TDU . Uniformly Distributed Load Capacity per each full shelf is 80 Kg maximum . For 1169 H TDU -A4 size box file can be stored vertically on two shelves and clear space above second shelf is 296 mm . The shutter opening shall be double shutters operating in opposite direction giving full accessibility to inside without disturbing aisle . The 10 lever cam lock through lock lever and color should be text. bond white - metal plus shutter - translucent white . Leveler shall be screw type with hex . plastic base with an add in unit height of min 8 mm & additional 5 mm max for adjustment. Finish shall be epoxy polyester powder coating to thickness of 50 micron (+/- 10). The manufacturer should have ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (all ISO must be from IAF recognised accreditation body), BIFMA (membership), AIOTA, Greenguard (by UL), GRIHA, Indian Design Mark, BIFMA Level-2, Indoor air quality certification.

Supplying and placing in position Main table of the following specifications. The Main table shall be of size 1800 Width mm x 900 mm Depth x 750 mm height. Top surface of the table shall made up of MDF (Medium density fibre ) board duly finished with Veneer and final coating of PU. The Main desk should contain in built key board pull out tray for keeping keyboard of computer. The front modesty panel of the table shall be made up of MDF board of size 1640 mm x 600 mm x 16mm which shall also be duly finished with Veener and PU coating. For personal storage one mobile pedestal (3 drawer unit) shall be provided of size 510 mm Width x 635 mm Height and 445 mm Depth. The storage pedestal shall also be made up of MDF duly finished with veener & final coating of PU. The Side shall be of size 1200mm Width x 445mm Depth x 660 mm Height. The side unit shall be made up of MDF board duly finshed with Veneer and final finish by PU Coating. The design of the side unit shall be such that it can be placed on either side of the main table. The side unit shall contain open space for keeping cpu in extreme right side, one closed storage shutter at extreme left end & open space in the middle with one shelf for keeping files. The thickness of the top of the side unit shall be 25mm. The manufacturer should have ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (all ISO must be from IAF recognised accreditation body), BIFMA (membership), AIOTA, Greenguard (by UL), GRIHA, Indian Design Mark, BIFMA Level-2, Indoor air quality certification.

Supplying and placing in position Back unit of the following specifications. The Size of the Back unit shall be 1000 mm width x 480 mm Depth x 2035 mm height. The back unit shall be made up of MDF board duly finished with veneer & final finish by PU coating. The mobile unit can be bought in multiples.PU coating hardness 1.5H. The manufacturer should have ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (all ISO must be from IAF recognised accreditation body), BIFMA (membership), AIOTA, Greenguard (by UL), GRIHA, Indian Design Mark, BIFMA Level-2, Indoor air quality certification.

Providing, supplying and placing of High Back Chair. SEAT ASSEMBLY: The seat is made up of 1.5±0.1 cm thick hot-pressed plywood upholstered with fabric and moulded polyurethane foam. SEAT SIZE: 51.8cm (W) x 49.7cm (D). BACK ASSEMBLY: The Back is injection moulded in glass filled Polypropylene which is 2 upholstered with Mesh fabric. The back consist of adjustable Lumbar support made of injection moulded Polypropylene having an adjustment of 5.0 10.1 cm. BACK SIZE: 47.9 cm(W) x 66.9 cm (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m and hardness 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS (ADJUSTABLE):The height adjustable armrest is made of Polypropylene and can be adjusted to 6.010.1cm height it also has swivel and To and Fro adjustment with moulded PU armtop. ACTIVE BIO-SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features: 360° revolving type, Front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfort, Till tension adjustment can be operated in seating position, 5-position Tilt limiter giving option of variable sit angle to the chair. Seat/back tilting ratio of 1:2. The mechanism housing is made up of HPDC Aluminium & black powder coated (DFT 40 to 60 micron). HEADREST: The Headrest sub-assembly is made up of injection moulded glass filed Polypropylene which is upholstered with moulded HR polyurethane loam and fabric has an adjustment of 3.00.1cm & it is assembled over GRETA 20F The complete headrest assembly is retro fic to the main chair. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with an adjustment stroke of 10.0±0.3cm. PEDESTAL ASSEMBLY: The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia is 166.1±0.5 cm.(76.1 ± 1.0 cm. with castors). TWIN WHEEL CASTORS: The twin wheel castors are Injection moulded in black Polyamide having 6.01 0.1cm wheel Diameter. WIDTH (W) - 76.0cm. DEPTH (D) - 76.0cm, HEIGHT (H) - 114.0 cm- 123.5cm, SEAT HEIGHT - 43.5 - 54.0cm. The manufacturer should have ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (all ISO must be from IAF recognised accreditation body), BIFMA (membership), AIOTA, Greenguard (by UL), GRIHA, Indian Design Mark, BIFMA Level-2, Indoor air quality certification.

Providing, supplying and placing of High Back Chair. SEAT ASSEMBLY: The seat is made up of 1.5±0.1 cm thick hot-pressed plywood upholstered with fabric and moulded polyurethane foam. SEAT SIZE: 51.8cm (W) x 49.7cm (D). BACK ASSEMBLY: The Back is injection moulded in glass filled Polypropylene which is 2 upholstered with Mesh fabric. The back consist of adjustable Lumbar support made of injection moulded Polypropylene having an adjustment of 5.0 10.1 cm. BACK SIZE: 47.9 cm(W) x 66.9 cm (H). HIGH RESILIENCE (HR). POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m and hardness 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS (ADJUSTABLE):The height adjustable armrest is made of Polypropylene and can be adjusted to 6.010.1cm height it also has swivel and To and Fro adjustment with moulded PU armtop. ACTIVE BIO-SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features: 360° revolving type, Front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfort, Till tension adjustment can be operated in seating position, 5-position Tilt limiter giving option of variable sit angle to the chair. Seat/back tilting ratio of 1:2. The mechanism housing is made up of HPDC Aluminium & black powder coated (DFT 40 to 60 micron). PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with an adjustment stroke of 10.0±0.3cm. PEDESTAL ASSEMBLY: The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia is 166.1±0.5 cm.(76.1 ± 1.0 cm. with castors). TWIN WHEEL CASTORS: The twin wheel castors are Injection moulded in black Polyamide having 6.01 0.1cm wheel Diameter. WIDTH (W) - 76.0cm. DEPTH (D) - 76.0cm. HEIGHT (H) - 114.0 cm- 123.5cm. SEAT HEIGHT - 43.5 - 54.0 cm.The manufacturer should have ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (all ISO must be from IAF recognised accreditation body), BIFMA (membership), AIOTA, Greenguard (by UL), GRIHA, Indian Design Mark, BIFMA Level-2, Indoor air quality certification.

Overall Dimensions of TDU shall be 900mm(W)x470mm(D)x1169mm(H) . The construction shall be Rigid Knock Down construction .All major panels -0.7 mm thick CRCA, False side panel - 0.9 mm thick ,Bottom Shelf - 0.8 mm thick CRCA sheet .Vertical Handle sections for shutters : 0.9 mm thick CRCA sheet . CRCA D Grade as per IS -513 .The Shutters shall be PVC shutters.Also there shall be 2 adjustable shelves for 1169 H TDU . Uniformly Distributed Load Capacity per each full shelf is 80 Kg maximum . For 1169 H TDU -A4 size box file can be stored vertically on two shelves and clear space above second shelf is 296 mm . The shutter opening shall be double shutters operating in opposite direction giving full accessibility to inside without disturbing aisle . The 10 lever cam lock through lock lever and color should be text. bond white - metal plus shutter - translucent white . Leveler shall be screw type with hex . plastic base with an add in unit height of min 8 mm & additional 5 mm max for adjustment. Finish shall be epoxy polyester powder coating to thickness of 50 micron (+/- 10). The manufacturer should have ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (all ISO must be from IAF recognised accreditation body), BIFMA (membership), AIOTA, Greenguard (by UL), GRIHA, Indian Design Mark, BIFMA Level-2, Indoor air quality certification.

Storwel plain shall have an overall size of 916mm(W)x486mm(D)x1981mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available. The manufacturer should have ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (all ISO must be from IAF recognised accreditation body), BIFMA (membership), AIOTA, Greenguard (by UL), GRIHA, Indian Design Mark, BIFMA Level-2, Indoor air quality certification.

Overall Dimensions of TDU shall be 900mm(W)x470mm(D)x1169mm(H) . The construction shall be Rigid Knock Down construction .All major panels -0.7 mm thick CRCA, False side panel - 0.9 mm thick ,Bottom Shelf - 0.8 mm thick CRCA sheet .Vertical Handle sections for shutters : 0.9 mm thick CRCA sheet . CRCA D Grade as per IS -513 .The Shutters shall be PVC shutters.Also there shall be 2 adjustable shelves for 1169 H TDU . Uniformly Distributed Load Capacity per each full shelf is 80 Kg maximum . For 1169 H TDU -A4 size box file can be stored vertically on two shelves and clear space above second shelf is 296 mm . The shutter opening shall be double shutters operating in opposite direction giving full accessibility to inside without disturbing aisle . The 10 lever cam lock through lock lever and color should be text. bond white - metal plus shutter - translucent white . Leveler shall be screw type with hex . plastic base with an add in unit height of min 8 mm & additional 5 mm max for adjustment. Finish shall be epoxy polyester powder coating to thickness of 50 micron (+/- 10). The manufacturer should have ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (all ISO must be from IAF recognised accreditation body), BIFMA (membership), AIOTA, Greenguard (by UL), GRIHA, Indian Design Mark, BIFMA Level-2, Indoor air quality certification.

Decor 9 (BID ID -5612320)

JYOTI COMMERCIAL CORPORATION (BID ID -5624401)