CONSTRUCTION OF GARDEN NEAR L.E. COLLEGE IN MORBI MUNICIPAL CORPORATION AREA AT MORBI.

TOTAL AMOUNT ₹6,663,249.59

NAME OF WORK- BEAUTIFICATION OF LE COLLEGE GARDEN

Sr. No. Item Description Unit QUANTITY Estimated Cost SOR REF

Clearing and grubbing road land including

uprooting rank vegetation grass bushes,

shrubs,sapling and trees girth up to 300 mm R&B KACHCHH

1 removal of stumps of trees cut earlier and Hectare 1.00 ₹ 28,173.36 ₹ 28,173 SOR ITEM CODE-

disposal of unserviceable materials (C) By 26117C

mechanical means in area of light jungle

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful R&B MORBI SOR

2 materials and disposing off the excavated stuff CuM 426.00 ₹ 121.72 ₹ 51,853 ITEM CODE

upto 50 Meter lead.(A) Loose or soft 04001A

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful R&B MORBI SOR

3 materials and disposing off the excavated stuff CuM 32.00 ₹ 155.77 ₹ 4,985 ITEM CODE

upto 50 Meter lead.(B) Dense or 04001B

Excavation for foundation for depth from 1.5 m to

3.0 m including sorting out and stacking of useful R&B MORBI SOR

4 materials and disposing off the excavated stuff CuM 95.00 ₹ 169.00 ₹ 16,055 ITEM CODE

upto 50 Meter lead.(B) Dense or Hard soil 04002B

Excavation for foundation for depth from 3.0 m to

5.0 m including sorting out and stacking of useful R&B MORBI SOR

5 materials and disposing of the excavated stuff CuM 63.00 ₹ 298.86 ₹ 18,828 ITEM CODE

upto 50 Meter lead.(C) Hard Murrum 04003C

Rolling and consolidation using vibratory road

roller 8 - 10 tonne capacity (incl. watering)(A)

6 SqM 427.00 ₹ 32.76 ₹ 13,989 SOR ITEM CODE-

Earth work (layer not exceeding 200mm

Construction of granular sub-base by providing

close graded material, mixing in a mechanical mix

plant at OMC, spreading in uniform layers with

7 motor grader on prepared surface and CuM 50.00 ₹ 1,184.00 ₹

compacting with vibratory power roller to achieve

the desired density complete (Grade-II)

Providing and laying cement concrete 1:4:8 (1-

Cement : 4- coarse sand : 8- hand broken stone R&B MORBI SOR

8 aggregates 40 mm nominal size) and curing CuM 34.00 ₹ 2,742.27 ₹ 93,237 ITEM CODE-

complete excluding cost of formwork in (A) 05004A

Foundation and Plinth

Filling available excavated earth (excluding rock)

in trenches. plinth, sides of foundations etc. in

layers not exceeding 20 cm. in depth

consolidating each disposited layer by ramming

Filling in foundation and plinth with brick Bats

Chhara in layers of 20cm. thickness including

watering, remming and consolidating etc.

CC work M-25 for RCC footing using aggregate of RMC

size 10-20 mm, centring, curing, finishing etc. BANDHKAM

complete (without reinforcement) SOR ITEM CODE-

CC work M-25 for Column using aggregate of size RMC

10-20 mm, centring, curing, finishing etc. BANDHKAM

complete (without reinforcement) SOR ITEM CODE-

CC work M-25 for Beam using aggregate of size RMC

10-20 mm, centring, curing, finishing etc. BANDHKAM

complete (without reinforcement) SOR ITEM CODE-

Providing TMT Bar FE 500D reinforcement for

R.C.C. work including bending, binding and placing

in position complete upto floor two level

Brick Masonry work in Cement:Mortar 1:6 RMC

20mm thick sand faced cement plaster on walls

upto height 10 metres above ground level

consisting of 12mm thick backing coat of C.M. 1:3

(1-cement : 3-sand) and 8mm thick finishing coat

of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Water Proofing Treatment on Terrace and Wall RMC

sides with smooth finishing including material- BANDHKAM

labour etc. complete SOR ITEM CODE-

Supplying, laying and fixing non-woven

polypropylene geotextile fabric of minimum

150–200 GSM beneath red soil/murum pathway

over prepared GSB surface, including surface

cleaning, proper overlapping (minimum 300 mm

at joints), anchoring with U-pins/staples,

trimming, protection during subsequent layer

placement and complete as per specifications and

engineer’s direction

Providing and laying Red Soil + Lime stabilised

flooring for pedestrian pathway, comprising

approved red soil free from organic matter, mixed

with hydrated lime @ 5–7% by weight, laid over

prepared base, including thorough mixing of

materials, spreading, levelling and finishing the

surface true to line, level and required slope,

complete as directed by Engineer-in-Charge

Supplying and applying eco-friendly organic soil

stabilizer / natural polymer binder (lignin-based /

enzyme-based / plant-derived), non-toxic, non-

cementitious and water soluble, conforming to

ASTM D4609 / IRC SP-89 guidelines, compatible

with red soil / murum, applied by dilution in

potable water and mixed uniformly with top

20 75–100 mm soil layer, improving CBR, cohesion SqM 84.00 ₹ 300.00 ₹ 25,200 MR

and erosion resistance, reducing dust and surface

ravelling, executed as per manufacturer’s

specifications including curing, complete as

directed by Engineer-in-Charge

Providing and laying brick kerbing along walkway

edges using first class burnt clay bricks

(230×110×75 mm) laid to required line, level and

curvature in cement mortar 1:3, including

jointing, necessary cutting, alignment, ramming,

curing and finishing complete as directed by

Engineer-in-Charge

Providing and laying Red Agra Sandstone slabs of

60 mm thickness, machine cut, true to line and

level, of approved colour and texture, laid over

prepared RCC base on treads and risers of steps /

stepped seating & flooring, including surface

preparation of RCC, cleaning and roughening,

application of cement slurry / approved polymer

bonding agent, laying sandstone slabs in cement

mortar 1:4 of average 20–25 mm thickness,

ensuring full bedding and proper adhesion,

maintaining uniform joints of 8–10 mm, providing

necessary edge alignment, chamfering, and anti-

slip grooves where required, fixing sandstone on

risers with approved bonding mortar, filling joints

with cement mortar 1:3 in matching shade,

cleaning the surface, curing for specified period,

applying approved penetrating stone sealer, and

completing the work in all respects as per

drawings, specifications and directions of

Engineer-in-Charge

Providing and fixing 50 mm thick Red Agra

Sandstone coping slabs on top of compound wall,

machine cut to required size and shape, with

smooth dressed edges and chamfered/bullnose

finish as approved, including necessary cutting to

curvature where required, laying over 20 mm

thick cement mortar bed (1:4), proper alignment,

leveling, jointing with cement slurry, providing

mm wide drip groove on underside, maintaining

uniform slope for water runoff, curing, finishing

and complete in all respects as directed by

Engineer-in-Charge.

Providing and fixing 25 mm thick Red Agra

Sandstone cladding on compound wall, machine

cut to required size and shape, with dressed

edges and approved surface finish, fixed over

mm thick cement mortar bed (1:4), including

24 surface preparation, slurry backing, alignment, SqM 145.00 ₹ 1,758.00 ₹ 254,910 MR

leveling, jointing with white cement slurry,

necessary cutting to size, curing and complete in

all respects as directed by Engineer-in-Charge

Providing and fixing Red Agra Sandstone solid

pillar/column of size 150 mm × 150 mm ×

mm, machine cut and dressed with approved

finish, including necessary cutting, shaping, edge

finishing, providing stainless steel dowel

25 anchoring (minimum 12 mm dia) fixed with epoxy Each 28.00 ₹ 4,200.00 ₹ 117,600 MR

adhesive into coping slab, proper alignment,

leveling, grouting with non-shrink grout, curing

and complete in all respects as directed by

Engineer-in-Charge.

Providing and fixing decorative Cast Iron (CI)

railing panels of approved heritage pattern, of

required height and design, supplied in modular

sections, including necessary CI lugs/brackets,

drilling in coping stone/RCC beam, providing

stainless steel anchor bolts (minimum 12 mm

dia), grouting with non-shrink grout or epoxy

26 adhesive, proper alignment, leveling, jointing Rmt 97.00 ₹ 6,969.00 ₹ 675,993 MR

between panels, surface cleaning, one coat red

oxide/zinc primer and two coats exterior grade

enamel/PU paint in approved shade, complete in

all respects as directed by Engineer-in-Charge.

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful R&B MORBI SOR

27 materials and disposing off the excavated stuff CuM 179.00 ₹ 121.72 ₹ 21,788 ITEM CODE

upto 50 Meter lead.(A) Loose or soft 04001A

Supply of sediment soil for garden(with laying GARDEN SOR

28 work) CuM 179.00 ₹ 468.00 ₹ 83,772 RMC ITEM

Desi shade fertilizer supply work GARDEN SOR

30 Supply & laying of NPK Fertilizer SqM 597.00 ₹ 10.00 ₹ 5,970 MR

Supply & Laying of Vermicompost fertilizer

Providing, supplying and spreading cocopeat

material of approved quality for mulching in

planting beds, shrub areas, tree basins and

landscaped zones, including transportation to

site, loading and unloading, labour for spreading

and uniform application to required thickness,

proper leveling and finishing, complete in all

respects as directed by Engineer-in-Charge.

Providing and laying Cynodon dactylon (Bermuda

Grass – Selection 1) lawn by turfing/sprigging

method using healthy, well-grown and weed-free

grass, including minor surface levelling and

dressing, removal of debris and unwanted

material, preparation of surface to proper slope

and camber, laying of grass uniformly, watering

immediately after laying, rolling to ensure proper

root contact with soil, and maintaining the lawn

including regular watering, mowing, weeding and

care for a period of 2 months to ensure proper

establishment, complete in all respects as

directed by Engineer-in-Charge

Supplying, planting and maintaining Mahendi

(Clerodendron inerme) plants of minimum

foot height, grown in 6" × 8" polybags, healthy,

well-rooted, uniform in growth and disease-free,

of approved nursery quality, including placement

in prepared planting beds/pits provided by others,

34 proper alignment and spacing as per approved SqM 80.00 ₹ 517.00 ₹ 41,360 MR

layout, application of recommended fertilizer,

fungicide and insecticide treatment at the time of

planting, watering, initial trimming and shaping if

required,complete in all respects as directed by

Engineer-in-Charge.

Supplying, planting and maintaining

Tabernaemontana divaricata (Tagar) plants grown

in 10" × 10" polybags, healthy, well-rooted,

uniform in growth and disease-free, of approved

nursery quality, including placement in prepared

planting beds/pits provided by others, proper

alignment and spacing as per approved layout,

35 application of recommended fertilizer, fungicide SqM 40.00 ₹ 1,873.00 ₹ 74,920 MR

and insecticide treatment at the time of planting,

watering, initial pruning and shaping if required,

complete in all respects as directed by Engineer-in-

Supplying, planting and maintaining Cerbera Red

(Cerbera odollam – red flowering variety) grown

in 21" × 21" polybags, healthy, well-established,

true to type and disease-free, of approved

nursery quality, including placement in prepared

planting pits provided by others, proper

positioning and alignment ensuring verticality,

application of recommended fertilizer, fungicide

36 and insecticide treatment at the time of planting, Each 3.00 ₹ 3,120.00 ₹ 9,360 MR

watering, staking and necessary support where

required, initial pruning if required, replacement

of dead plants during maintenance period,

complete in all respects as directed by Engineer-in-

Supplying, planting and maintaining Champa tree

(Plumeria species / Michelia champaca or

approved equivalent species) grown in 25" × 25"

polybags, healthy, well-established, true to type,

and disease-free, of approved nursery quality,

including placement in prepared planting pits

provided by others, proper positioning and

alignment ensuring verticality, application of

recommended fertilizer, fungicide and insecticide

treatment at the time of planting, watering,

staking and necessary support where required,

removal of damaged or dry branches if required,

replacement of dead plants during maintenance

period, complete in all respects as directed by

Engineer-in-Charge.

BUILDING RESTORATION & INTERPRETATION

Providing, erecting, maintaining and dismantling

scaffolding and supporting arrangements required

for building restoration works, including double

scaffolding system using steel tubular scaffolding

with base plates, adjustable jacks, ledgers,

transoms, cross bracing, working platforms with

wooden planks/steel decks, guard rails, toe

38 boards, safety nets and access ladders, complete LS 100.00 ₹ 300.00 ₹ 30,000 MR

in all respects as per site requirement and safety

standards, including shifting, maintenance during

execution period and removal after completion,

as directed by Engineer-in-Charge.

Carefully dismantling and removing existing

cement plaster/lime plaster from walls, ceilings,

columns, beams or architectural elements to

required depth, including hacking, chiseling

manually without damaging underlying masonry

or structural members, removing loose and

39 deteriorated plaster, cleaning the surface, SqM 279.00 ₹ 120.00 ₹ 33,480 MR

stacking serviceable material separately (if

required), and disposing of unserviceable debris

outside site premises as directed by Engineer-in-

Charge, complete in all respects.

Carefully demolishing existing reinforced cement

concrete (RCC) slab of any thickness at all levels

by manual/mechanical means in a controlled

manner, including cutting of concrete into

manageable sections, cutting and removing

reinforcement steel, providing temporary

supports and propping where required,

preventing damage to adjacent structural

members, lowering dismantled material safely to

ground level, stacking serviceable steel separately

(if required), and removing unserviceable debris

outside site premises as directed by Engineer-in-

Charge, complete in all respects.

Carefully dismantling and removing existing stone

masonry/stone work of any thickness, including

stone blocks, ashlar masonry, random rubble

masonry or stone cladding, by manual means

using appropriate tools, without causing damage

to adjoining structural members or architectural

elements, including removal of mortar joints,

41 lowering dismantled stones safely to ground level, CuM 5.00 ₹ 1,800.00 ₹ 9,000 MR

stacking serviceable stones separately if required,

and disposing of unserviceable debris outside site

premises as directed by Engineer-in-Charge,

complete in all respects.

Carefully dismantling and removing existing

wooden work such as doors, windows, frames,

shutters, paneling, beams, rafters, ceiling

members, wooden partitions or other timber

elements, by manual means without causing

damage to adjoining masonry or structural

components, including removal of holdfasts,

42 hinges, fasteners and fittings, lowering the CuM 5.00 ₹ 2,640.00 ₹ 13,200 MR

dismantled material safely to ground level,

stacking serviceable materials separately as

directed, and disposing of unserviceable debris

outside site premises, complete in all respects as

directed by Engineer-in-Charge.

Repairing and restoring existing wooden doors

and windows including frames and shutters by

carefully removing damaged portions, replacing

deteriorated timber members with matching

seasoned hardwood, tightening loose joints, re-

fixing and adjusting shutters, repairing or

replacing damaged panels, providing necessary

holdfasts, screws and fasteners, applying anti-

termite treatment, minor filling with wood putty

where required, sanding and surface preparation,

making good all works to restore original

functionality and appearance, complete in all

respects as directed by Engineer-in-Charge.

Providing and constructing stone masonry work

using approved quality natural stone (random

rubble / dressed / ashlar as specified) laid in lime

mortar of specified proportion (generally 1:2 or

1:3 – lime putty : sand), including dressing of

stones, proper bonding, filling of joints,

maintaining line, level and plumb, curing with

water, scaffolding where required, and all

necessary tools, labour and materials complete in

all respects as directed by Engineer-in-Charge.

Providing and applying plaster work in two coats

over prepared masonry/stone surface, including

thorough cleaning of substrate, raking of joints

where required, wetting of surface, application of

base coat and final finishing coat to specified

thickness, maintaining proper line, level and

plumb, curing and finishing complete in all

respects as directed by Engineer-in-Charge.

Providing and laying Kota stone slabs of approved

quality, machine cut and of uniform thickness, laid

over prepared base in cement mortar bed,

including surface preparation, proper alignment,

leveling, jointing, curing, grinding and finishing

complete in all respects as directed by Engineer-in-

Providing and laying lime concrete composed of

slaked lime putty (matured minimum 7 days),

clean sand and well-graded brick ballast/stone

aggregate in proportion 1:2:5 (or as specified),

thoroughly mixed manually or in approved mixer,

laid in layers not exceeding 150 mm thickness,

47 properly compacted by ramming, brought to SqM 75.00 ₹ 2,400.00 ₹ 180,000 MR

required level and slope, including curing for

minimum 10–14 days and protection from rapid

drying, complete as directed by Engineer-in-

Providing and fixing wooden work in frames,

shutters, beams, rafters, paneling, partitions or

other architectural elements using approved

seasoned hardwood of required section and size,

including cutting, shaping, joinery, necessary

screws, nails and fasteners, holdfasts, fitting and

fixing in position, application of anti-termite

treatment, surface preparation, and making good

complete in all respects as directed by Engineer-in-

Providing and laying Kota stone / sandstone slabs

of minimum 20–25 mm thickness (or as

specified), true to line and level, laid over 20 mm

thick cement mortar bed (1:4), including surface

preparation, application of cement slurry on back

of slab, maintaining uniform joints not exceeding

2–3 mm, filling joints with matching slurry, curing

for minimum 7 days, and final finishing by

grinding, rubbing and polishing (for Kota) or

natural/honed finish (for sandstone), complete as

directed by Engineer-in-Charge.

Providing plinth protection of minimum 600 mm

width in natural stone slabs of 25–40 mm

thickness, laid over 75 mm thick PCC (1:4:8) or

lime concrete base (as specified), including proper

surface preparation, compaction, 1:50 outward

slope for drainage, drip groove near wall edge

where required, and complete finishing as

directed by Engineer-in-Charge.

Providing, fabricating and installing curved

modular wooden display/interpretation structure

comprising primary structural frame of seasoned

hardwood/engineered wood sections (minimum

50×75 mm), secondary framing members, curved

laminated ribs formed by multi-layer plywood

bending, cladded with 12 mm BWP grade

plywood panels, including CNC routing/engraving

of text and graphics where required, smooth

sanding, edge finishing, necessary screws, joinery,

internal bracing, anchoring to floor with anchor

fasteners, surface finishing with primer and two

coats PU matte polish/paint in approved shade,

complete in all respects as directed by Engineer-in-

URBAN FURNITURE

Providing, fabricating and fixing modular curved

garden bench made of Rajnagar White Stone,

machine cut and hand-finished, comprising

mm wide solid stone seating slabs of minimum

mm thickness supported on carved solid stone

pedestals/legs of approved traditional design,

assembled at site to form a continuous curved

bench of approximately 7.15 meters length,

including edge moulding, surface finishing

(honed/matte finish), dowel jointing between

segments using stainless steel dowels, stone

adhesive, proper leveling, alignment, necessary

lifting, placing, fixing in position over prepared

base provided separately, complete in all respects

as directed by Engineer-in-Charge.

Providing, supplying and fixing decorative outdoor

cast iron dustbin of capacity 100–120 litres, made

from heavy-duty cast iron body with ornamental

panels, complete with top hinged / liftable cover,

internal removable MS/HDPE liner, corrosion-

resistant primer + two coats of exterior grade

enamel / PU paint (dark grey/black as approved),

smooth edges, drain holes at base, and weather-

resistant construction suitable for urban roads,

footpaths, gardens and public places, including all

fittings, fasteners, anchoring bolts, fixing on RCC

base / hard surface, transportation, loading-

unloading, labour, tools, complete in all respects

as per approved sample and drawing.

Point wiring for Light / Bell with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch

/ bell push & accessories and earth continuity of

following type, erected on PVC /

Metallic/Wooden box, single mounting base R&B ELECTRIC

54 frame covered with textured/ metallic/ white Pt 5.00 ₹ 461.00 ₹ 2,305 SOR ITEM 1-2-1

front plate modules erected on / in wall / ceiling (F)

as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete CAT (II)

Point wiring for Individual Plug with & earth wire

of 1.5 sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch &

pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected

with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm

Cu. Wire from nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete CAT II

[II] For 16A Plug and 16 amp switch with 2-2.5

sq.mm Cu.Wire from mcb db board. (f) with R&B ELECTRIC

56 medium class Rigid PVC pipe and accessories Pt 5.00 ₹ 712.00 ₹ 3,560 SOR ITEM 1-2-3

erected concealed in wall/ceiling complete CAT (II) (F)

[III] For 16A Plug and 16 amp switch with 2-4

sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing

wire from mcb d b board. (f) with medium class

Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete CAT II

Point wiring for on board Looped Plug with 6A

Modular type switch & 5 pin socket erected on

PVC / Metallic/Wooden box, single mounting base

58 frame covered with textured / metallic/white Pt 5.00 ₹ 234.00 ₹

front plate modules erected on / in wall / ceiling

with following type accessories CAT II

Point wiring for Two Way Controlled Light Point

with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of .ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires erected

in below type of pipe with 6A Modular type

switches and following type of accessories

erected on PVC /Metallic/Wooden box, single

mounting base frame covered with textured / R&B ELECTRIC

59 metallic/white front plate modules erected on / in Pt 5.00 ₹ 576.00 ₹ 2,880 SOR ITEM 1-2-5

wall / ceiling as per pipe erected. with necessary (F)

batten/angle holder or ceiling rose or

H.D.Connector as directed. (f) with medium class

Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete CAT II

Point wiring for Tissino / Modular secondary light

point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires, in below

type of pipe to be erected complete with earth

continuity and necessary connection with primary

light with accessories erected on Metal / PVC /

wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic sheet for open / R&B ELECTRIC

60 concealed wiring. with necessary Lamp holder Pt 5.00 ₹ 166.00 ₹ 830 SOR ITEM 1-1-4

/ceiling rose / H.D.Connector as directed.Note:- (F)

Maximum up to 6 mtrs length, excess will be

considered as Mains for Secondary Point. (f)

with medium class Rigid PVC pipe and

erected concealed in wall/ceiling complete

CONDUIT & PIPES

Providing and erecting ISI mark Medium class

RIGID PVC PIPES of following size complete to be

erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed with

adhesive solution & Clamps with following dia of

pipes, in approved manner as directed (a)20 mm

(b) 25 mm R&B ELECTRIC

Providing & erecting PVC Corrugated Flexible

Conduit with required nos. of coupling, PVC

bushes, Check-nuts etc. complete of following

sizes. (1) 20 mm

(2) 25 mm R&B ELECTRIC

Supplying & erecting UPVC Mini trunking (PVC

Casing-n-Capping) having double-locking

arrangement with grooves, trunking of size not

below 12.5 mm in height as per IS with

65 accessories of PVC/Resin polypropylene not Mtr. 100.00 ₹ 22.00 ₹

below 1.8 mm thick duly sealed in joint & erected

on wall / ceiling of following size . (1) 20 mm

MAIN & SUBMAIN WIRES

Providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling,

with 1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth

continuity of following size (A) With medium class

Rigid PVC pipe and accessories

(c) 3 wire 1.5 sq. mm R&B ELECTRIC

(d) 3 wire 2.5 sq. mm R&B ELECTRIC

providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC

pipe and accessories

(d) 3 wire 4 sq. mm R&B ELECTRIC

(e) 3 wire 6 sq. mm R&B ELECTRIC

(i) 4 wire 10 sq. mm R&B ELECTRIC

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable Aluminium conductor for 1.1 KV.

to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables.

(C) 2 core 10 Sq. mm RMC ELECTRIC

(B) 2 core 6 Sq. mm RMC ELECTRIC

(A) 2 core 4 Sq. mm RMC ELECTRIC

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe of following

size of cables.

(A) 3 core 2.5 Sq. mm R&B ELECTRIC

(B) 3 core 4 Sq. mm R&B ELECTRIC

(C) 3 core 6 Sq. mm R&B ELECTRIC

(D) 3 core 10 Sq. mm R&B ELECTRIC

(E) 3 core 16 Sq. mm R&B ELECTRIC

Providing and erecting XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables

(B) 4 core 6 Sq. mm R&B ELECTRIC

(C) 4 core 10 Sq. mm R&B ELECTRIC

Providing and erecting XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe of following

(A) 4 core 16 Sq. mm R&B ELECTRIC

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Copper

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at

road crossing or floor of following size of cables.

(C) 4 core 6 Sq. mm R&B ELECTRIC

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cables.

(A) 4 core 10 Sq. mm R&B ELECTRIC

providing and erecting Mains with ISI marked,

1.5KV grade electrolyte multi stranded, annealed

copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor

starters & control wiring) with required size of

copper lugs, nuts and bolts if required. (f) One

wire 10.00 sq. mm

(g) One wire 16.00 sq. mm R&B ELECTRIC

Providing and, fixing heavy duty flange type brass

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.

(A) 2 to 4 core 2.5 / 4 Sq. mm R&B ELECTRIC

(B) 2 to 4 core 6 Sq. mm R&B ELECTRIC

(C) 2 to 4 core 10 Sq. mm R&B ELECTRIC

(D) 2 to 4 core 16 Sq. mm R&B ELECTRIC

Solder less crimping type Aluminium lugs

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

(A) 1.5/ 2.5/4/6 Sq.mm R&B ELECTRIC

(B) 10 Sq.mm R&B ELECTRIC

(C) 16/25 Sq.mm. R&B ELECTRIC

Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to

IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion

resistance with diffuser housed in aluminium

casted body with company mark/name 160V to

270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 % ( fitting required LM-

79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(I) Adjustable spot light with COB led having

aluminium reflector of following wattage (ii)

(B) LED Panel Light with provision for Plane front

frame with translucent cover fixed to housing

complete.IP20 (iii) 12-15 watts, 6" x 6", Surge-2

(iv) 18 to 20 watts, 8" x 8", Surge- 2 KV

(v) 24 watts, 12" x 12" , Surge-2 KV

(vi) 36 watts, 24" x 24", Surge- 2KV

(F) Spot Light 425 Lumens, Surge-2KV (i) 3 to

Providing and erecting PVC body surface or

mounting LED Bulk type 9 watt Lighting Fitting

electronic driver. And lumen output from

luminaire 720lm , input voltage range 90-300VAC

, 50Hz cool white(3000 to 6500k), inbuilt driver, -

20degC to +60degC working temperature, AL

frame with Beam Angle 120deg

Providing and fixing LED Spike Light (9W–12W) for

outdoor landscape applications, complete with

LED driver, IP65 protection, die-cast aluminium

housing with powder-coated finish,

clear/toughened glass diffuser, suitable spike rod

for soil fixing, tiltable/adjustable mounting

bracket, waterproof connectors, screws and

fasteners, making all waterproof electrical joints,

placing spike firmly into soil, angle adjustment,

connection to power supply, testing and

commissioning, including all labour, materials,

tools and tackles, complete in all respects as

directed by Engineer-in-Charge.

Providing and fixing LED Focus Light (30W–50W,

COB type) with IP66 protection, die-cast

aluminium body with powder-coated finish,

tempered front glass, high-efficiency reflector

optics, adjustable tiltable mounting bracket, surge

protection ≥4 kV, complete with external or in-

built LED driver, waterproof connectors,

mounting clamps, nuts and bolts, including aiming

adjustment, installation, testing and

commissioning, all labour, materials, tools and

tackles, complete in all respects as directed by

Engineer-in-Charge.

SWITCHGEAR & ACCESSORIES

Providing and erecting Sheet Steel powder coated

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company

of MCB to be used) suitable for (B) three phase

incoming and single phase horizontal type

outgoing Per phase isolation type (PPI) (b)

sheet steel double door (iii)8 way

(A) single phase incoming and horizontal single

phase outgoing (b) sheet steel double door (IP-

Providing & erecting 415V MCB Four Pole Switch

Lighting Load (B curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box

having following capacity (b)40 Amp. CAT (ii)

providing and erecting Miniature circuit breaker

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA to

be erected in existing box. confirming to IS

8828/1996 with ISI Mark CAT (ii)

Providing & erecting 240 V MCB double pole

switch for motor & inductive load (C Curve)

having 10 KA breaking capacity & confirms to IS :

8828 in existing box having following capacity (A)

6 to 32 Amp. CAT(ii)

Supply of Approved make Iron Clad or metal clad

four pole change over switch 415V. confirming to R&B ELECTRIC

IS of following capacity (A) 63 A SOR ITEM 3-6-3

Supplying & erecting 20 Amp 10 KA ‘C Curve’

pole MCB with 20 Amp. Plug socket, company R&B ELECTRIC

110 fabricated powder coated sheet steel enclosure Each 2.00 ₹ 472.00 ₹ 944 SOR ITEM 3-10-

erected as directed with connection. [A] Metal 6-A

Clad Socket with metal clad top CAT (ii)

Providing and erecting Three pole Miniature

isolator A.C. 22 duty confirms to IS 13947-3 in

existing box. (b) for 63 Amp. CAT(ii)

Approved make ELCBs / RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 6 KA and suitable for

operation on single phase 240 V. having

characteristic of quick action & tripping with all

advance feature & do not incorporate any

electronic component. for following Max. rating

erected as directed (i) 25 Amps.DP Cat. III

Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking

capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed

thermal & magnetic release suitable to work on

113 A.C. supply 50 c/s. with all internal connections, Nos. 3.00 ₹ 6,112.00 ₹

spreader tinned copper & complete erected in

existing 16 G.M.S. housing. ICS=100% of ICU

STREET LIGHT POLES

Providing, supplying, erecting, testing and

commissioning decorative aluminium pole light of

2.90 m overall height, complete with heavy-duty

aluminium pole, cast aluminium base and

aluminium post-top double arm luminaire, fitted

with 2 × 50 W high-efficiency Bridgelux LED

modules, Nextor make LED driver with required

surge protection, internal copper wiring, PP

powder-coated finish suitable for outdoor

conditions, Havells make MCB with in-pole

connector strip, including pole mounting

hardware, base plate, anchor bolts, electrical

terminations, earthing provision, transportation,

unloading, installation, alignment, testing,

commissioning at site, and providing 2-year

warranty on luminaires, complete in all respects

as per approved drawing, sample and technical

specifications.

Making trench in soft soil of suitable width of

cm deep for laying cable or locating the fault all

115 over the run and back filling the same and making Mtr. 100.00 ₹ 55.00 ₹

the surface as normal ground.

Supplying and erecting Fabricating terminal box

for street light pole made from 16 SWG M.S.

sheet having following size complete with fixing

arrangement for terminal board, with necessary

hole for wire entry and exit from the box. The box

shall be provided with cover and hinges on one

side and bolting at other end The box shall be R&B ELECTRIC

fixed by clamps fabricated from 25mm x 6mm SOR ITEM 6-4-2

flat.The box shall be painted with one coat of red

oxide and two coats of paint having following box

330 mm x 260 mm x 140 mm (depth)

Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as

per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia

of 25 mm having 200- 250 Micron galvanising,

connection terminal dia of 12mm with constant

ohmic value surrounded by highly conductive

compound with high charge dissipation suitable

for following type of applications with chamber

and heavy duty cover.(approved make OEM has

R&B SOR - 2025-

to submit test certificate) & having back filling

compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 • / meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be

capable to retainmoisture for long time Necessary

test report must be submitted.(c) For Electrical

Installation covering Transformer Neutrals,

Lightning arrester Earthing, A.C.Plant & Sensitive

Computer System(like Automation, SCADA) i.e

independent (c) For Electrical Installation

covering Transformer Neutrals, Lightning

arrester Earthing, A.C.Plant & Sensitive

Computer System(like

Providing and Automation,

erecting Pipe SCADA)

type earthing with

mm dia 2.5 mtr long 'B' grade G.I. pipe with

R&B SOR - 2025-

necessary coupling buch buried in specially

prepared earth pit & G.I. earth wire of 8 SWG

erected & connected as directed (For panel)

For using salt and charcoal / coke as required for

pipe type earthing.

Providing one bag of 25 Kg. Additional Back Filling

120 Compound (BFC) suitable for safe earthing Ea. 10.00 ₹ 700.00 ₹ 7,000 3-14-11.

Providing and erecting required size Copper strip

for earthing of H.T. OCB / ACB/ Transformer, LT

panel board, Motors etc. using copper clamp.

Providing, supplying, installing, testing and

commissioning 64-channel Network Video

Recorder (NVR) of (CP Plus / Hikvision / Dahua or

approved equivalent), supporting IP cameras up

to 8 MP, with minimum 8 SATA interfaces for

HDD storage, H.265+/H.265/H.264 video

compression, dual HDMI/VGA output, multiple

network ports, alarm input/output, USB ports,

RAID support (where applicable), ONVIF

compliance, remote monitoring through web and

mobile application, complete with power adapter,

rack mounting accessories, configuration,

integration with CCTV network and all

accessories, complete in all respects as per

specifications and directions of Engineer-in-

Providing, supplying, installing, testing and

commissioning 8 MP colour dome IP camera of

CP Plus / Hikvision / Dahua or approved

equivalent with built-in microphone, featuring

minimum 8 MP (3840×2160) resolution, 1/2.8”

CMOS sensor, full-colour low-light imaging (hybrid

IR / warm-light where applicable),

H.265+/H.265/H.264 compression, ONVIF

compliance, fixed lens 2.8 mm / 4.0 mm as

specified, minimum 30 m IR / white-light

illumination, IP67 weatherproof and IK10 vandal-

resistant housing, PoE (IEEE 802.3af) power,

including fasteners, alignment, configuration,

testing and commissioning, complete in all

respects as per specifications and directions of

Engineer-in-Charge.

Providing, supplying, installing, testing and

commissioning 8 MP colour bullet IP camera of CP

Plus / Hikvision / Dahua or approved equivalent

with built-in microphone, having 1/2.8” CMOS

sensor, minimum 8 MP (3840×2160) resolution,

colour imaging in low light (supplementary warm

light where applicable), H.265+/H.265/H.264

compression, ONVIF compliance, fixed lens (2.8

mm / 4.0 mm as specified), minimum 30 m IR /

124 white-light illumination, IP67 weatherproof Nos. 3.00 ₹ 13,200.00 ₹ 39,600 MR

housing, PoE (IEEE 802.3af) support, integrated

audio capture, including all fasteners, alignment,

configuration, testing and commissioning,

complete in all respects as per specifications and

directions of Engineer-in-Charge

Providing, supplying, installing, testing and

commissioning 8-port Gigabit PoE Ethernet switch

of CP Plus / Hikvision / TP-Link or approved

equivalent with SFP uplink, comprising 8 nos.

10/100/1000 Mbps RJ-45 PoE ports compliant

with IEEE 802.3af/at, with minimum 2 nos. SFP

ports for fibre uplink, total PoE power budget not

less than 120 W, supporting VLAN, QoS, IGMP

125 snooping, surge protection, fanless / low-noise Nos. 1.00 ₹ 4,500.00 ₹ 4,500 MR

operation (where applicable), including power

cord, mounting accessories, patching, basic

configuration, testing and commissioning,

complete in all respects as per specifications and

directions of Engineer-in-Charge

Supply, installing, testing and commissioning of

central management software for Viewing, multi-

NVR management, suppoerting all cameras at one

single screen and maximum devices management,

auto search configuration and status monitoring

as per instruction by EIC/Consultant.

Providing, supplying, installing, testing and

commissioning 8 TB capacity surveillance-grade

hard disk drive of Seagate / Western Digital /

Toshiba or approved equivalent, specifically

designed for 24×7 continuous video recording,

compatible with Network Video Recorders

(NVRs), supporting SATA III interface, minimum

127 5400–7200 RPM, cache not less than 256 MB, Nos. 1.00 ₹ 25,500.00 ₹ 25,500 MR

optimized for multi-camera environments, low

power consumption and high reliability, including

mounting in NVR, formatting, configuration,

health check and testing, complete in all respects

as per directions of Engineer-in-Charge

Providing, supplying, installing and commissioning

24U floor-mounted network/server rack,

fabricated from heavy-gauge CRCA steel, 19-inch

standard, with front toughened glass door,

lockable rear/perforated door, removable side

panels, adjustable mounting rails, cable entry

provisions at top and bottom, complete with

nos. cooling fans, 1 no. rack-mount Power

Distribution Unit (PDU) with surge protection,

earthing provision, hardware accessories, leveling

feet/casters, installation, alignment and testing,

complete in all respects as per specifications and

directions of Engineer-in-Charge.

Providing, supplying, installing, testing and

commissioning PoE junction box for IP CCTV

camera, made of weatherproof polycarbonate /

powder-coated aluminium enclosure, suitable for

outdoor installation, including RJ45 CAT-6

termination, PoE pass-through / coupler, cable

glands, internal mounting plate, gasket sealing,

fixing on pole / wall / structure, proper cable

dressing, weatherproofing, testing and

commissioning, complete in all respects as per

specifications and directions of Engineer-in-

Providing, supplying, installing and fixing junction

box of size 5" × 5", made of heavy-duty PVC /

polycarbonate / powder-coated metal as

specified, suitable for indoor / outdoor

application, including cover with gasket, cable

130 entry knock-outs, terminal connectors, screws, Nos. 7.00 ₹ 75.00 ₹ 525 MR

rawl plugs, fixing on wall / pole / structure, proper

alignment, sealing, testing and making good,

complete in all respects as per directions of

Engineer-in-Charge

Providing, supplying, installing, testing and

commissioning 40-inch LED television of LG /

Panasonic / Nextview or approved equivalent

with Full HD resolution (1920×1080), minimum

two HDMI ports and one VGA port, USB interface,

built-in speakers, wide viewing angle, suitable for

24×7 display operation, including wall-mount

bracket / table stand (as specified), power cord,

basic configuration, connection testing and

commissioning, complete in all respects as per

specifications and directions of Engineer-in-

Supplying & erecting approved make LAN cable of

132 following size in existing pipe as per direction Mtr. 200.00 ₹ 47.00 ₹

AE/AAE DY ENGINEER CITY ENGINEER