Construction of forest guard hut in Boh Beat , SHAHPUR Forest Range, Dharamshala Forest Division During 2020-21

Amount

Cutting in earth work and disposal of excavated earth upto a lead 20 mtr

Excavation in foundation trenches. Etc.in earth work lift upto 1.50 mtr stacking the excavated soil not more then 3 mtrs clear from the edge of the excavation and then returning the starked soil in 15cm layers, when required into the plinth sides of foundation extra ,consolidating each disposed layer by remming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 mtrs in pick & jumper work

Providing & Laying of Cement Concrete 1:6:12(1 cement : 6 sand : 12 graded stone aggregate 40mm nominal size ) and curring complete excluding cost of centring and shuttering in foundation and plinth

Random rubble stone masoney in cementmortar 1:6 in foundation i/c dressing of stoneof approved quility in foundation and plinth including levelling up with CC. 1:6:12 (1 cement : 6 sand :12 Stone agrigates 20mm nominal size) at plinth level in cement mortar 1:6 (1 cement : 6 Sand)

Providing form work with steel plates 3.15mm thick welded sheet with angle iron 30*30*5mm so as to give a fair finish i/c centering , shuttering , strutting and proping etc. with wooden bettens and bellies and removels of the same for insitu- rainforced concrete &and plain concrete work in beams, cantilevers, girders and lintals. sides and soffics of beams ,haunchings,Cantilivers, bressumers and limtels not exceeding 1 mtr in depth.

R.C.C Work 1:2:4 (1cement ;2 Sand :and 4 graded stone 20mm nominal size i/c curing complete but excluding cost of form work and reinforcement.

providing for mild steel/ tor steel rainforcement for RCC work including bending , binding and placing complete

brick work using common work brunt clay building bricks with rat trap bond in super structure in cement mortar 1:6 (1 cement : 6 sand) Second class bricks 1) above plinth level upto flour two level .

wood work in frames of door windows and clestering windows and other frames wrought framed and fixed in position in 1st class deodar wood.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped mettlic zinc coated sheet with top of reguler modified polyster organic coating of 20 microns over 5 micron primer coating + back coat of polyster of 5 microns over 5 microns primer including fixing with screw prepainted iron J and L hooks, bolt and nuts 6mm diameter with prepainted limpet and rubber washers complete with all accesories as required as per the direction of engineer in charge

Providing & fixing ridges or helps 60cm over all with 0.60mm thick prepared steel sheet in roofing with hot dipped mettalic zinc coated sheets with top coat of reguler modified polyster of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns primer including fixing with screw prepainted iron J or L hookes ,bolt and nuts 6 mm dia meters and prepainted G.I. limpet and bitumen washers complete with all accesories as required as per the direction of engeneer in charge

Providing & fixing ridges or helps 60cm over all with 0.60mm thick prepared steel sheet in roofing with hot dipped mettalic zinc coated sheets with top coat of reguler modified polyster of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns primer including fixing with screw prepainted iron J or L hookes ,bolt and nuts 6 mm dia meters and prepainted G.I. limpet and bitumen washers complete with all accesories as required as per the direction of engeneer in charge

Providing and fixing 100mm dia pipes on wall face PVC (D-plast) rail water pipes of working pressure not less then 4.5 kg /sqm including filling the joints with approved adhesive complete.

Providing and fixing PVC concrete type bend 100mm dia on wall faces PVC (D-Plast) accessories for rain water pipes incliding filling the joint with approved adhesive complete.

Providing eves board 200*25mm thick including fixing in position in 1st class shisham wood

Filling in plinth with sand under floors including watering ,ramming , consoilding and dressing complete

Stone filling under floor including consolidating complete

White glazed tiles 6mm thick in flooring treads of steps and landing laid on a bed on a bed of 12mm thick CM 1:3 (1 cement: 3 Sand) finished with a flush pointing in white cement

White glazed tiles 6mm thick in flooring treads of steps and landing laid on a bed on a bed of 12mm thick CM 1:3 (1 cement: 3 Sand)and joint with cement slurry

15 mm thick cememt plaster 1:5 cement and Sand in respective rato in rough sides of bricks stones concrete walls for plastering up to flour two level finishing even and smooth including scaffolding

providing &fixing m/s gril of required pattern plain gril in wooden frames of windowa etc plain grill

steel work welded in built up sections ,trusses and frames work includng cutting, hoisting, fixing in postion and applyingpriming coat of red lead paint (tursses and trussed purlins in buildings)

providing and fixing of panalled glazed or panalled glazed shutter for door and windows including black enamelled iron butt hings with necessery screws 40mm thick 1st class shisham wood

Providing and fixing wir gauge shutter using GMS wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for door and windows . Including bright finish / black

Providing and fixing anodized aluminium sliding door bolts anodised colour and shade with boult and nutts screw etc. complete 300*16mm

Providing and fixing anodized aluminium sliding door bolts anodised colour and shade with boult and nutts screw etc. complete 250*10 mm

Providing and fixing anodized aluminium sliding door bolts anodised colour and shade with boult and nutts screw etc. complete 150*10mm

Providing and fixing aluminium handles anodized transparent or dyed to requried colour of shade with necessary screws etcetera complete.125mm

Providing and fixing aluminium handles anodized transparent or dyed to requried colour of shade with necessary screws etcetera complete.75mm

providing & fixing 100mm of bright finished brass flour door stoper with rubber cushin screw extra to suit sutter thickness complete

providing & fixing 100mm of bright finished hard drawn hooks and eyes

Providing and fixing partical board ceiling of approved quality with butt jointing and nail (frame work and cover fillets to be paid for separetely) cement bounded partical board 8 mm thick

distempering (two caots) with oil bound washeble distemper of approved brand and manufecture and of required shade on undecorated wall surfaces to giver an even shade over and including priming cate distemper primer of approved brand and manufucture after brushing surface free from mortar dropping and other foreign metter and also including preparing the surface even and sand prepared

finishing wall with water proofing cement paint of approved brand and manufucture and of requied shade on undecoated wall surface two coate togive an even shade after throughly burshing the surfase to remove all dirt and remaine of loose powdered materials

applying priming coat over new wood and wood based surface afer and includingpreparing the surface by throughtly cleaning oil , grease, dirt and other foreign metter sand preparing and knotting ready mixed paint brushing with white leadfor priming .

painting two coate (excluding primary coat)on new wood wood based surfase with enamal paint to give an even shade including cleaning the surface of dirt, and dust and other foreigen matter and sand papering and stopping with white enamel paint

providing under layer for plinth protectionof 75 mm thick bed of dry brick / stone aggregate 40mm nominal size wali rammed and consolidating and grouted with fine sand including preparation ground

providing pllnth protection 50mm thick with cment concrete 1:2:6(1 cement :3sand 6 graded stone aggregate 20mm nominal size

construction coursed rubble hummer dress u shape opensurfase drain

providing and fixing to wall, seling and floor galvanized mild steel tubes ( medium greed tube fiting and clams including making good the wall, seling and floor of 15mm nominal bore.

providing and laying in treches, galvanized mild steel tubes ( medium greed) tube fiting of 15mm nominal bore (earth work in trenches to be majoured and paid sepretly

providing and fixing sintex tank of 1000 Ltr. Capacity with 400 mm nominal bore galvanized mild steel scour steel tube with fitting, 25 mm nominal bore galvanized mild steel over flow tube with fitting, and mosquito proof coupling of approved municipal design, 15 mm nominal bore before valve and mousquito proof gavnized mid steel cover with locking arrangement including providing pads to size of required for inlet and outlet tubes including hoisting up to height of 10 meter above ground level.

providing and fixing15 mmdia nominal bore syntax nipple including rubber washer with 15mm nominal dia brass wheel cock including threading complete.

proving and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. 75mm nominal size.

proving and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. 110 mm nominal size.

providingand fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc complete. 110 mm nominal size

providing and fixing high pressure PVC spigot and socket, wast and ventilating pipes ISI marked fittings and accessories including fixing with approved adhesive etc. complete. Blend of required degree (any radius) with oal access door insertion rubber washer 3mm thick, bolts and nuts complete. 75 mm Nominal Size

Plain ( 110 mm nominal size.)

with oval access door insertion rubber waher 3mm thick, bolts and nuts complete 110 mm nominal size

Collar ( 75mm N=nominal size)

Collar ( 110 mm N=nominal size)

providing and fixing PVC Cowl 110mm nominal size.

proving and fixing PVC floor trap ISI marked of self cleaning design icluding fixing with approved adhesive, cost of ccutting and making good wht walll and floors etc. complete 110x75 mm nominal size

cutting chase in stone/ bricks masonry walls for fixing PVC pipes and fittings inlcuding making good the same with stone/brick wirk in emtn mortar 1:3 (1cement :3 Sand) 75 mm nominal size

cutting chase in stone/ bricks masonry walls for fixing PVC pipes and fittings inlcuding making good the same with stone/brick wirk in emtn mortar 1:3 (1cement :3 Sand) 110 mm nominal size

providing and fixing vitreous China water closet squatting pan) (indian type W.C. Pan) size 580mm (earth work, bed concrete, foot rest, and trap to be measured and paid for separately. Orrisa pattern

Proving and fixing PVC 'P' or 'S' trap for water closet (sqquatiing pan) ISI marked including jiointing the trap with the pan and PVC pipe with approved adhesive etc. complete.PVC 110 mm dia.

Providing and fixing 10.0/12.50/15.00 liyters PVC low level flushing cistern with a pair of C.I or mild steel brackets, complete with fitting such as lead valve less siphon, 15mm nominal size brass ball valve with ploythene float, C.P brass handle unions and coupings for connections with inlet, outlet and overlow pipes, 40mm dia C.P flush bend including cutting holes in walls and making good the same and connecting the flush end with cistern and closet (overflow pepe to be measured and paid for separately).

providing and fixing G.I inlet connection for flush pipe with W.C pan

providing and fixing vitreous China wash basin with single hole for piller tap with C.i or M.S brackets painted white including cutting holes and making good the sam ebet excluding fittings (flat back) 550mm x 400 mm)

providing and fixing kitchen sink with C.I or M.S brakckets painted white including cutting hole in walls and making good the same but excluding fitting; vitreous China 600mm x 450mm x 150mm

Proving and fixing C.P Brass waste for wash basin or sink of 32 mm dia

Proving and fixing M.I. union for wash basin or sink of 32mm dia.

providing fixing 32 mm dia, PVC waste pipes for wash basin or sink inlcluding brass check nut.

providing and fixing 600mm x 450mm bevelend edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers.

providing and fixing C.P brass towel rail complete with C.P brass brackes fixed to wooden plugs with C.P. Brass screw of 600mm x 20mm

providing and fixing choromium plated brass soap sidh with C.P brass brackets fixed to wooden cleats with C.P brass screws.

providing and fixing C.P Brass bib tap with capstan Head 15mm dia

providing and fixing C.P Brass piller tap with capstan Head 15mm dia

Providing and fixing C.P Brass piller stop cocks 15mm dia.

Providing and fixing PVC connection pipe with brass unions 45 Cms length (15mm nominal board)

Wiring for light point/fan point/exhaust fan/call bell point with 1.5Sq.mm.PVC insulated heat resistant flame retardent (HRFR) and smoke single core (flexible)copper conductor cable in surface/recessed steel conduit and earthing the light point with 1.5Sq.mm.HRFRLS/PVC insulated single core copper conductor cable as required. (a) Group -C.

Supplying and fixing following rating Piano-type switch /socket on the existing switch box / cover including connections etc. as required. S.P. 5/ 6 Amps one way switch, piano type.

Supplying and fixing following rating Piano-type switch /socket on the existing switch box / cover including connections etc. as required. S.P. 5/ 6 Amps one way switch, piano type. 5 pin 5/ 6 Amps socket outlet, porcelain base/ piano type.

Bell push, piano type.

Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size)on surfaces/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16amps socket outlet and 15/16 amps,piano type switch, connections,painting etc.as required.

Wiring for circuit/sub main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable is surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. 2x1.5mm

Wiring for circuit/sub main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable is surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. 2x4.0mm

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. 2x6 Sq. mm.

Supplying and fixing bakelite batten/angle holder including connections etc as required

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-

Providing and installation of exhaust fan of following sizes in the existing opening,including making the hole to suit the size of the above fan making good the damages, connections, testing and commissioning etc as required Exhaust Fan,Light duty,(Domestic)300mm sweep.

Providing Installation, testing and commissioning of ceiling fan with regulator,including wiring the down rods of standard length(upto 30cm)with 16/0.20mm twin twisted flexible,cotton braided ,copper cable,including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc as required Ceiling fan 1200mm sweep Ceiling Fan 1200 mm sweep, Category-A

Supplying and fixing of following way ,single pole and neutral sheet MCB distribution Board, 240 Volts, on surface/recess,complete with tinned copper bus -bar,wire-set,neutral link,earth bar,din-bar, detachable gland plate, blanking plate, cable, identification labels, interconnections, phosphatized and powder painted,including earthing etc. as required Signle door -8 Way

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- single Pole Cat-B

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- single Pole Cat-A

Supplying Installation, testing and commissioning of LED lamps 7 Watt Havel make in the existing batten holder, pendent holder and wall brackets etc. as required.

Supplying and fixing of bulk head fitting of all sizes and shapes, containing one No. thread type CFL lamp holder (s), complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. Bulk head fitting, CFL type (Category-A)

Earthing with G.I earth pipe 4.5mtr.Long and 40mm dia,including accessories and providing masonry enclosure with cover palte having locking arrangement and watering pipe etc(but without charcol or coke and salt)complete as required.

Extra for using salt and charcol for pipe earth electrode complete as required.

Supplying and laying 6 SWG G.I. wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required.

excavation in foundation trenches. Etc.in earth work lift upto 1.50 mtr stacking the excavated soil not more then 3 mtrs clear from the edge of the excavation and then returning the starked soil in 15cm layers, when required into the plinth sides of foundation extra consolidating each disposed layer by remaining and watering and then disposing of all surplus excavated earth as directed with in a led of 20Mtrs. in pick & Jumper work.

Providing & laying of Cement Concrete 1:6:12(1 cement : 6 sand : 12 graded stone aggregate 40mm nominal size ) and curring complete excluding cost of centring and shuttering in foundation and plinth

Brick work usin common clay brunt building bricks with rat trap bound in super structure in cement mortar 1:6 (cement:6 sand :12 graded stone aggregate 40mm nominalsize ) and curing complete excluding cost of centring and shuttering in foundation and plinth

15mm cement plestering 1:4 (1cement :4 sand ) in respect ratio in rough sindes of brick stone concrete wall for plastering upto floor two level finished even and smooth including scaffolding.

Providing and laying cement concrete 1:2:4 1(1cement: 2 sand: and 4 graded stone 20mm nominal size i/c curing complete excluding cost of centring and shuttering

providing form work of ordinary timber/ planking so as to give rough finish i/c centering shuttering and propping

Mild steel Reinforcement forRCC work i/c bending binding and placing position complete

R.C.C Work 1:2:4 (1cement ;2 Sand :and 4 graded stone 20mm nominal size i/c curing complete but excluding cost of form work and reinforcement.

boulder/ brick pieces, graval filling in soak pit

excavation in foundation trenches. Etc.in earth work lift upto 1.50 mtr stacking the excavated soil not more then 3 mtrs clear from the edge of the excavation and then returning the starked soil in 15cm layers, when required into the plinth sides of foundation etc, consolidated each deposite layer by raming and watring and then desposing of all surplus excavated earth as directed with in a lead 20Mtr. in pick Jumper work

Stone soling under floor property hand packed and packed and consolidationby hand ramming complete.

Providing and laying in Cement concreate 1:5:10 (1 Cement /5 Sand /10 graded stone aggrigate 20mm nominal Size) and curing complete excluding cost of centring and shutring in foundation and plinth.

Providing and laying in Cement concreate 1:1.5:3 (1 Cement /1.5 Sand /3 graded stone aggrigate 20mm nominal Size) and curing complete excluding cost of centring and shutring in foundation and plinth.

suspended flour ,roofs, landing, shelves and their sport belconies beams ,girdeds, bresssmurs and cantiliver upto floor two level

providing from work withsteel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm so as to give a fair finish including centring, shuttering, strutting and proppping and shutterng belw supporting floor to ceiling not exceeding 4 mtrs and removal 4 mtrs and removal of the same for insutu- reinforcemed concrete & plain concrete work in ordinary imber planking so as give rough finish i/c centering and shuttring. (seismic bond) on plinth and Lintel level. vertical surface such as walls (any thickness) partitions and the like i/c attached pillasters, buttresses, plinth and string courses and the like.

Flats surfaces such as soffites of suspended floors, roof ,landing and the like.upto 200mm in thickness

providing tor mild steel/for tor steel reinforcement for RCC work including bending, landings and the placing complete

6 mm thick Cement plaster 1:3 (cement: sand in respective ration in rough sides of brick stones/ concrete walls for plastering upto floor two level finished even and smooth including scaffolding.

Proving and fixing high pressure PVC Spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. Including carriage as per approved brand of Architec/ site Engineer. 110 mm nominal size ISI

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage approved brand of Architect/ Site Engineer. 110 mm nominal size ISI

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage approved brand of Architect/ Site Engineer. 110 mm nominal size ISI

providing and fixing PVC plain bend Isi marked including fixing with approved adhesive etc. complete including carriage as per approved brand of Architect/ Site.110 mm nominal size ISI

proving and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete including carriage as per approved brand of Architect/ sote Engineer. 110 mm nominal size ISI

Suppling and fixing cast iron cover with frame for man holes frame of 600mm internal dia C.I cover (medium duty) the weight of cover to be not less than 58 Kg.

Excavation in foundation trenches. Etc.in earth work lift upto 1.50 mtr stacking the excavated soil not more then 3 mtrs clear from the edge of the excavation and then returning the starked soil in 15cm layers, when required into the plinth sides of foundation etc., consolidationg each depostited layer by ramming and watering and then disposting of all surplus excavated earth as directed with in a lead of 20 meters.

Providing and laying cement concrete 1:6:12 (1 cement:6 sand : 12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centring and shuttering in Foundation and plinth.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 sand : 12 graded stone aggregate 20mm nominal size) at plinth level in Cement Mortar 1:6(1 cement:6 sand)

Square Rubble Stone Masonry with hard stone of approved quality in Cement Mortar (1:6)

Brick work using common burnt clay building bricks in super structure upto floor two level in cement mortar 1:6

Half Brick masonary 1:4

Providing and laying cement concrete 1:6:12 (1 cement:6 sand : 12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centring and shuttering in Foundation and plinth.

Cost of Gate

Sushil Sharma