Construction of public toilet block at north side of coconut garden parking area belongs to SVVS Devasthanam, KAnipakam (2nd Call)

Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and 1m additional lift charges over the initial depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308)

Filling foundation trenches with good carted sand from approved quarry in layers not exceeding 150 cm, watering and ramming including cost and conveyance of water to worksite and all operational,incidental, labour charges etc., complete for finished item of work.

Plain Cement concrete in prop. (Cement : fine aggregate: coarse aggregate ) using 40mm size (SS 5) hard Granite Machine Crushed Metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , including seigniorage charges on all materials, all taxes, labour charges , machine mixing, laying of concrete in foundations and under flooring bed, ramming in layers not exceeding 15cm thick, finishing top surface to the required level, curing etc., complete for finished item of work as per (S.S. No. 402) per 1 Cum.(1:4:8)

Random Rubble stone masonry in CM (1:6) prop: (Cement: Screened sand) using hard granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., from approved quarry, to site and excluding seigniorage charges, sales & other taxes on all materials including labour for cutting stones to required size and shape, mixing, of cement, mortar, construction, curing etc.,and overheads & contractors profit complete for finished item of work in foundation and basement. (APSS No. 601 & 615)

Supply and placing of the M-20 (1:1 1/2:3) Grade Vibrated reinforced Nominal Mix Concrete corresponding to IS 456 using concrete MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including Unsupported Height upto 3.66 M with steel scaffolding pipes, jack props, steel centering plates, but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for COLUMNS, LINTELS,IN BUILDINGS Nominal Mix : M 20

Supplying, fitting and placing HYSD (Fe 500/ tmt grade as per IS 1786-1985) bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded including cost and conveyance of bars from approved sources to site of work, binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes, on cost of all materials complete for finished item of work

Filling with Morum in basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work (APSS NO.309&310)

Supplying fabrication and erection of MS Trusses with medium quality various MS-Square hollow section for coloumn and purlins etc., including cost and conveyance of all materials to site with taxes and duties and labour charges for cutting, placing , welding and erection etc complete for finished item of work.

Brick masonry 230 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using Bricks second class or ground moulded (Non-Modular or traditional size) 23 x 11 x 7 cm from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of excluding seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., complete for finished item of work as per SS 504. for:-Brick Masonry in CM 1:8 (Country)

Brick Masonry for partition walls (115 mm thick) in CM (1:5) prop.(Cement:Sand) using Bricks second class or ground moulded (Non-Modular or traditional size) 23 x 11 x 7 cm from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, excluding cost of seigniorage charges on all materials, scaffolding charges and all labour charges like mixing cement mortar, lift charges, curing, complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 509 & 501)

Plastering 12mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904)

Plastering 20 mm thick in two coats with base coat of 20 mm thick in CM (1:3) including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete for External & Uneven Surfaces of Brick Wall and RCC exposed surfaces for finished item of work. (SS 901,903 & 904) for:-Plastering 20 mm

Supply and fixing of Galvalume sheet Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.5mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile length: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours with minimum end of 15 cms etc.,complete as directed during execution.

Painting with synthetic enamel paint of approved color and brand two coats over primary coat total 3 coats) to the new Iron work, including cost and conveyance of all materials, labour charges etc.., complete

Painting to new walls with 2 coats of acrylic emulsion of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls for:-Internal Colouring - plastic emulsion - 2 Coats + 1 coat primer

Flooringwith Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and design sceramictiles,setoverbase coat ofcement rtar(1:8), 12mm thick over CC bed already laidor RCC roof slab ,including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement past eto full depth mixed with pigment of matching shade, including cost of all materials like cement, sandwaterandtilesetc.,complete,includingseignioragecharges,etc.,completeforfinisheditemofwork,butexcludingthecostofconveyanceofallmaterials.

Providing Dadooing / Skirting to internal Walls to 15cms height / raisers of steps with glazed red or white full body ceramic wall tiles of size 300 x 450 mm and thickness 7.3 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs of approved make set over 12mm thick in CM (1:4) base coat and neat grey cement slurry of honey like consistency at the rate of 3.3 Kgs per Sq.mt and jointed with white cement paste mixed with pigment of matching shade to match the shade of tiles including cost and conveyance of all materials and water to work site including sales and other taxes on all materials, cost of base coat, all operational, incidental and labour charges such as mixing mortar, fixing in position, including lift charges, curing, cleaning the surface etc., complet e but excludingSeigniorage charges for finished item of work (APSS No.701)

Providing and fixing28 -30 MM thicksolidWoodPolymerComposite(WPC)single extruded door shutter with 3MMtop and bottom rigid layer with an overalldensity of 750kg/Cum. It will be fixed tothe frame using 3 inch /4 inch hinges. Aminimum of 4 hinges will be required forfixingthe doorwith the frame Complete.

Providing and fixing factory made solidWood Polymer Composite (WPC) singleextrudedDoorFramesectionofsize with encapsulation of 8MM rigid layer onall the six surfaces. The door frame willhavearebatof32MM.Door Frame section of 45x75 MM .Thetwo Vertical members are to be joinedtogetherwiththehorizontalmember using 8x50 MM long MS Star full threadscrews to be used with reverse forwardspeedcontrolhanddrillingmachine .Theready/assembleddoorframeisfixed to the wall using hold fast or boltfasteners.Aminimumof4No.sofscrews to be provided for each verticalmember & minimum 2no.s forhorizontalmember.

Supplying and fixing of 16mm to 20 mm thick polished marble slab partitioins of size 4' 0" x 2' 0" for urinals including full rounding the edges , fixing in position, polishing, including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work for all floors.

Supplying, fabricated, assembling and fixing in position anodized aluminium partiion zindal/Hindal or equivalent make using sections in combination of plain, single groove and double grove as per requirement for the frames of over size 77.6mmx27.6mmx1.70mm etc., complete for finished item of work (Alluminium partition)

Supply of high strength Cement Concrete terrazzo/pre-polished/ chequered Step tiles with edge rounded and grooved conforming to IS: 13801 using aggregates, cement, pigments of any premium colour, design and of 25 mm hicknessset over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of seigniorage charges on all materials, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for finished item of work

Laying of Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes & diameters for - 304 Grade including Labour charges for Fabrication of stainless steel railing works using stainless steel welding rods including buffing, polishing, lacquer finishing, to present seamless finish.

Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered uPVC sections with TPV gaskets having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall size of 60 x 55 mm with reinforcement of 1 mm thickness and Mullion with overall size of 74 x 60 mm with reinforcement of 1 mm thickness. Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware. Wall thickness of frame & Mullion shall be 2.0 mm

Supplying and Laying of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kgf/Sq.cm fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326)

75 mm dia 4kgf/cm^2

110 mm dia 4kgf/cm^2

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) 28.60 mm dia CPVC SDR 13.50

Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 630 x 450 mm - Double C.P. Pillar cock

Supplying and Fixing Pedestal for Wash Hand Basin(H.S.W / Parry / Earthenware) complete

Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware / Parryware / Neycer with brick - ISI mark and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern Parryware or equivalent with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and seigniorage charges, overheads & contractors profit etc., complete for finished item of work.

Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hindustan / Neycer or Parryware make white glazed with 'S' trap,supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern Parryware or equivalent with internal components and fixed using required size of nails and screws, 12mm PVC connections with brass union nuts CP coated including cost and conveyance of all materials to site, overheads & contractors profit etc., complete for finished item of work for all floors.

Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make : 410 x 265 x 305 mm

Supplying and fixing NP soap dish heavy type of approved make ISI quality with NP screws etc., complete including cost and conveyance of all materials, labour charges for fixing , overheads & contractors profit for finished item of work in all floors

Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm , plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.

Supplying and fixing of 19.04mm dia , 609.6mm long aluminium anodized towel rods with brackets and aluminium screws including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work.