Estimate for repairing and maintenance work over the damage surface in stretch Km 0.80 to Km 2.30 of Joypur- Pathdanga Road under Murshidabad Highway Division No. II PW(R)Dte in the District of Murshidabad during the year 2026-27.

Tack Coat Providing and applying tack coat with Cationic bitumen emulsion (RS1) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular /cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503). i) On bituminous surface @ 0.25kg /sqm Using Cationic RS 1

Repairing Pot-holes with Bituminous Macadam (Grading-II,for compacted thickness of upto 75mm):-Filling Pot Holes with Bituminous Macadam using Mobile Hot Mix plant (6-10 TPH) with approved crushed aggregates of specified grading premixed with bituminous binder @3.4% by wt. of the total mix, transported to site and laid in the pot hole prepared before hand by cutting the edges to get a firm vertical face and by removing all the failed and loose materials including dust and applying tack coat evenly on the sides and on the surface as per specification, rolling the filled depression with 8-10 tonne smooth wheeled roller to achieve the desired compaction, including the cost and carriage of stone aggregates and bitumen, hire charges of machinery and equipment, cost of fuel and lubricants and wages of all operational staff, quality control except the cost of tack coat complete as per direction of Engineer-in-charge. Payment to be made on the basis of the loose net volume of the stone aggregates used in the work.

Filling Pot-holes and Patch Repairs with open-Graded Premix surfacing, 20mm. Removal o fall failed material,in the pavement courses and if necessary below the pavement,until the root causes of the failure is removed,thetrimming of completed excavation to provide firm vertical faces; specified for the pavement layer; application of tackcoat conforming to cl. 503 of MORT&H'sspecification ,on to the sides and base of excavation prior to placing hot bituminousmaterial as per clause 510 and the compaction, trimming and finishing of the surfaces of all patches to form a smooth continuous surface, level with the surrounding road as per the requirement of clause 3004.2 of MORT&H's specification .

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using. Type A and B seal coats (Reference to MORT&H's specification clause 511). Case - II : Type B Providing and laying of premix sand seal coat with HMP using approved crushed stone chipping and viscositygrade paving bitumen of suitable approved grade.