Fire fighting and fire alarm system works for DRRF unit at Velakode Thrissur

Amount

Supply, installation, testing and commissioning of Electric Driven terrace pump for automatic pressurization of down comer system in cases of leakages, consisting of the following: a) Horizontal, end suction, monoblock type Centrifugal fire pump CI Body, Bronze impeller,SS Shaft,mechanical seal, running at suitable RPM capable of delivering 900 LPM at 30Mtr IS1520 b) Squirrel cage TEFC induction motor suitable for 415V, 3 phase, 50Hz AC supply of suitable HP conforming to IP-55 protection & class ‘F’ insulation. c) The rate shall include base plate common to pump and motors, foundation bolts, Coupling, coupling guards and standard mounting Accessories. RCC foundation as per the soil condition, AVM Padsetc Included in the Scope complete as per CPWD Specification.

Supply, installation, testing and commissioning of Heavy duty PN-25 grade Flanged Expansion Rubber Bellow with CU for Pump Suction & Delivery to overcome vibrations. 100 mm dia

Supply, Installation, Testing and Commissioning of Pressure switches of suitable range for pump sets with required accessories.

Supply, Installation, Testing and Commissioning of Pressure gauge of suitable range for pump sets. Glycerine filled 100mm dia pressure gauges to use on pump discharge & test lines. Cost shall be inclusive of cock, short pieces, nipples etc as required.

Supply, Installation, Testing & Commissioning of M.S class 'C' (heavy class) pipes confirming to IS 1239, IS3589 including cutting, welding complete with fittings like elbow, bends, flanges, reducers, G.I nuts,bolts and washers etc... The pipes shall be painted with one coat of primer & two coats of synthetic enamel Paint using approved shade, Galvanized hanging supports with standard spacing, suitable structural supports, fasteners, threaded rods etc., fixing in/on walls/ ceiling as per standards. 100 mm dia

Supply, Installation, Testing & Commissioning of M.S class 'C' (heavy class) pipes confirming to IS 1239, IS3589 including cutting, welding complete with fittings like elbow, bends, flanges, reducers, G.I nuts,bolts and washers etc... The pipes shall be painted with one coat of primer & two coats of synthetic enamel Paint using approved shade, Galvanized hanging supports with standard spacing, suitable structural supports, fasteners, threaded rods etc., fixing in/on walls/ ceiling as per standards. 80 mm dia

Supply, Installation, Testing & Commissioning of M.S class 'C' (heavy class) pipes confirming to IS 1239, IS3589 including cutting, welding complete with fittings like elbow, bends, flanges, reducers, G.I nuts,bolts and washers etc... The pipes shall be painted with one coat of primer & two coats of synthetic enamel Paint using approved shade, Galvanized hanging supports with standard spacing, suitable structural supports, fasteners, threaded rods etc., fixing in/on walls/ ceiling as per standards. 65 mm dia

Supply, Installation, Testing & Commissioning of M.S class 'C' (heavy class) pipes confirming to IS 1239, IS3589 including cutting, welding complete with fittings like elbow, bends, flanges, reducers, G.I nuts,bolts and washers etc... The pipes shall be painted with one coat of primer & two coats of synthetic enamel Paint using approved shade, Galvanized hanging supports with standard spacing, suitable structural supports, fasteners, threaded rods etc., fixing in/on walls/ ceiling as per standards. 50 mm dia

Supply, Installation, Testing & Commissioning of M.S class 'C' (heavy class) pipes confirming to IS 1239, IS3589 including cutting, welding complete with fittings like elbow, bends, flanges, reducers, G.I nuts,bolts and washers etc... The pipes shall be painted with one coat of primer & two coats of synthetic enamel Paint using approved shade, Galvanized hanging supports with standard spacing, suitable structural supports, fasteners, threaded rods etc., fixing in/on walls/ ceiling as per standards. 40 mm dia

Supply, Installation, Testing & Commissioning of M.S class 'C' (heavy class) pipes confirming to IS 1239, IS3589 including cutting, welding complete with fittings like elbow, bends, flanges, reducers, G.I nuts,bolts and washers etc... The pipes shall be painted with one coat of primer & two coats of synthetic enamel Paint using approved shade, Galvanized hanging supports with standard spacing, suitable structural supports, fasteners, threaded rods etc., fixing in/on walls/ ceiling as per standards. 32 mm dia

Supply, Installation, Testing & Commissioning of M.S class 'C' (heavy class) pipes confirming to IS 1239, IS3589 including cutting, welding complete with fittings like elbow, bends, flanges, reducers, G.I nuts,bolts and washers etc... The pipes shall be painted with one coat of primer & two coats of synthetic enamel Paint using approved shade, Galvanized hanging supports with standard spacing, suitable structural supports, fasteners, threaded rods etc., fixing in/on walls/ ceiling as per standards. 25 mm dia

Supply, Installation, Testing and Commissioning of wafer type lever operated Cast Iron butterfly valves, EPDM gaskets, stainless steel shaft, SS - 304 disc, with flanges, nut bolts & necessary accessories. The valve shall be PN16 rated. 100 mm dia

Supply, Installation, Testing and Commissioning of wafer type lever operated Cast Iron butterfly valves, EPDM gaskets, stainless steel shaft, SS - 304 disc, with flanges, nut bolts & necessary accessories. The valve shall be PN16 rated. 80 mm dia

Supply, Installation, Testing and Commissioning of CI Dual plate Non- return valves as per API 594( PN 16) Wafer type,SS - 304 disc with required flanges, nuts, bolts, washers and gaskets etc. complete as required. 100 mm dia

Supply, Installation, Testing and Commissioning of forged Brass Ball valves (PN 25) with fittings of screwed end type. 20 mm dia

Supply, installation, testing and commissioning of approved make 25 mm dia automatic air release valve.

Supply, Installation, Testing & Commissioning of Single headed Hydrant valve as per IS 5290, made of stainless steel with 63 mm dia oblique type, with instantaneous out & 80 mm dia flanged inlet,PVC blank cap, chain & hand wheel etc complete.

Supply, Installation, Testing & Commissioning of Stainless steel grade-304, 63mm dia instantaneous pattern short Branch pipe, Inlet male threaded outlet, fitting with 20 mm dia nozzle conforming to IS 903.

Supply & Installation of Hose cabinet made of 16 gauge MS Sheet. and marked "FIRE HOSE" on outside with door and locking arrangements, suitable to accommodate of hose pipe along with one pair of male and female coupling and one branch pipe, suitable for wall mounting/pedestal type. The cabinet shall be painted to scarlet red colour outside and off-white inside. The pedestal shall be made of MS Supports and mounted on a PCC foundation on the ground.

Supplying and fixing 63 mm dia, 15 m long CP hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & Pipe and socket.

Supply, installation, testing and commissioning of fire brigade inlet connection of 4 way with 4 nos. 63 mm dia built - in Gun metal Non- return valves instantaneous coupling type arranged on 150 mm dia flanged outlet complete with bolts, nuts and gaskets etc as required. Pipe manifold and connected to discharge header.

Supply, installation, testing and commissioning of Sprinkler quartzoid bulb type of 68 deg. C. temperature rating and K80 and orifice Not less than 6 mm. Sprinklers shall be UL Listed. 1/2" threaded with required accessories. Pendant type 68 deg C

FIRE ALARM PANEL:- Supply, installation, testing and commissioning of Control Panel of 4 Zonecomplete with charger, rectifier, alarm display with all other necessary attachments with Battery

Supply ,installation,Testing and commissioning of manual call points of break glass type

Supply, installation, testing and commissioning of audio alarm hooters.

Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.

Supplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required

Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes. 1.00 sq.mm 2 Run

Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required 20 mm dia

Supply and Installation of ABC type fire extinguisher of 5 Kgs.IS 4308. Capacity with initial filling in brand new cylinder with powder coated finish, discharge hose, wall mounting bracket etc. complete. The Extinguisher is manufactured strictly as per IS: 15683:2018.

Supply and installation of CO2 type Fire Extinguishers of following capacity - 4kgConforming to IS:13849 with initial gas, filled in steel cylinders, safety valve with lock, discharge hose and horn etc and with ISI mark.

Supply and Installation of self-glowing type single side Sign Boards made out of 3mm thick "Opaque" PVC foam board having minimum SIZE:- 100 X 300 MM The Sign boards shall be hanged with chain and reading as FIRE EXIT/EXIT/FIRE EXTINGUISHER/MANUAL CALL POINT/FIRE BREAK GLASS etc

Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br> Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc. Supply and fabrication of MV panel board using 2.00mm CRCA sheet, powder coated (excluding base frame)

Supply and providing SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc. 2mm thick

Supply and providing heavy duty "U " section neoprene gasket in the panel board.'U' section rubber beeding suitable for 1.60/ 2.00 mm sheet

Fabrication, supply, conveyance and installation of angle iron frame for wall mounting panel board .

Supply and providing copper earth bus in the panel board.

supply, convence and fixing the following types and current rated control gears and switch gears conforming to IS 13947 suitable for 440V, 50 Hz, AC supply in the existing pannel assembly as required- MCCBS 32/40A, 25/35 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with current limitting based release with thermal setting of 80 - 100% having adjustable OL & SC

Supply and providing 0.5A to 2A SP MCB and giving connection etc as required

: Supply and providing electronic on delay timer for star delta starter

Supply and providing Auxilary contactor for Control Relay , Type MCX, 2 No: + 2NC:, 415V, L&T&

Supply and providing Plug in Relay , 10Amps, 2Pole, 240V AC, for proper mounting and giving connections etc: as required. (Salzer/L&amp;T Make

Supply and fixing one number 25 A (AC 23 A 3 pole, power contactor with AC coil in the existing panel assembly as required

Supply and fixing rotary handle, Direct type (including BUC handle with door interlock ) in the existing MCCB of rating up to 250 A

: Supply &amp; fixing spreader upto 125A MCCB

Supply &amp; fixing Red, Green, Black, Yellow, Orange colours LED indicator, AC/DC, 22.5 mm cut out dia

od1370916/2021_2022 : Supply &amp; fixing Blue colour LED indicator, AC/DC, 22.5 mm cut out dia

od1370918/2021_2022 : Supply &amp; fixing multi function meter suitable for V, A ,F, 3 phase accuracyclass 1

Supply & fixing 100/5 A, 5 VA, accuracy class 1, Resin Cast Metering CT

Enameled Danger Notice Board of size 250 x 200 mm. with inscriptions ( both in English and Malayalam) and conventional Skull and Bone in Red colour.

Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.1x1.00 sq mm

3 x 4 sq. mm

3 KVAr, 3 phase, 440 V, delta connected standard duty Metalised Poly Propylene Capacitor, Cylinderical Type suitable for direct connection to motors.

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 6 sq mm with factory made clamp

:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 6 sq. mm (19mm)

od1370999/2021_2022 : Supplying and providing copper earth clamps for siemens/ tropodur type cable glands of suitable length and other dimensions noted along with each size of glands for the following sizes of cables as required.4sqmm-16 sq mm with 12 mm wide x 1 mm thick clip

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

od1370897/2021_2022 : S&amp;F 25X6MM Brass nut , bolt &amp; washer

Exit Way signages & Emergency Exit lights, LED Exit / Egress Edge lit lights with rechargeable battery, white powder coated housing, having input voltage of 230V 50Hz.

Supply, Installation, Testing & Commissioning of self-glowing type single side Sign Boards made out of 3mm thick "Opaque" PVC foam board having minimum SIZE:- 100 X 300 MM.

Supplying and installing in position laminated sheet of "Fire Evacuation Plan". Providing wall mounting display board with double side 3mm thick imported acrylic sheet & Autoglowsheet with SS Studs Digital color print on Traceperacy Sheets : Size 24"X18"

Fee to be remitted to fire&rescue department for getting NOC ( actual amount will be rembursed on production of documents).