IMPROVEMENT OF RECREATIONAL FACILITIES AT AF-II AND PROVN OF QTY-03 HIGH MAST LIGHT (15MTRS) AT VARIOUS LOCATIONS AT AF STATION KHAMBHALIYA UNDER GE (AF) JAMNAGAR NO.2

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil complete all as specified and directed.

Removing excavated soil exc. 500 m but n exc.1000 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M & L for Cement concrete 1:4:8, type D-2, (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M & L for broken stone hardcore of broken stone of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:4:8, type D-2, (using 40 mm graded stone aggregate) as in Sub base for path / flooring complete all as specified and directed.

M&L for sand filling (using 25mm thick sand screed bed) under floors or in foundations including watering and consolidation complete all as specified and directed.

Material & Labour for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade, without correction factor for chamfering, made in rubber moulds with 0.50 mm thick scratch proof lacquer coating on top surface, with grey cement and pigment complete all as specified and directed.

M&L in repairs for filleting in any position and to any shape and the section of fillet exc. 25 sq cm but n exc. 50 sq cm in cement mortar 1:4 including all mitres, stops, etc complete all as specified and directed.

M & L for Pre-cast cement concrete block masonry with solid blocks Type C1 1:3:6 ( using 20mm gradd aggregate), exc. 10 cm in width and setting in cement mortar (1:6), complete all as specified and directed.

M&L for 10 mm thick plastering in CM 1:4 on fair faces of concrete surfaces finished even and fair on wall complete all as specified and directed.

M&L for Granite work not less than 18 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with granite shade, laid over and including 15 mm thick cement screed bed in CM 1:6 complete all as specified and directed.

M&L for rounding to edges of Granite/ Kota stone slabs one edge, such as in steps cooking platform, and other similar situation complete all as specified and directed.

S&F mild steel framed work such as grills gratings etc with ends of bars shouldered and / or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walkways railings framework of water tanks and similar work conforming to Fe 290 Grade E-165 complete all as specified and directed.

M&L for preparation of newly or untreated steel or iron surfaces of any description not otherwise described over 10cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, velley gutter fixed with self tapping screws complete all as specified and directed.

M & L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, velley gutter fixed with self tapping screws as specified

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey pigment cement and pigments complete all as specified and directed.

M&L for Reinforced cement concrete M-25( 20mm graded aggregate) (normal mix) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs,culverts and in shelves and the like all as specified and directed. Note:- Reinforcement steel will be measured & paid separately.

M & L mild steel TMT bars 10mm dia and over cut into length bend to shape required incld cranking bending spirally for hooping for column, hooking ends and binding with and incld mild steel wire (annealed) not less than 0.90mm dia or securing with clips.quality conforming to Fe-410-W( Gde,E-250) complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finished flat surface of concrete complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with need cement slurry, laid over and including 15 mm thick cement screed bed in CM 1:6 complete all as specified and directed.

Supply, testing & commissioning of 15/16 metre high galvanised mast light shaft in two sections suitable for wind speed as per IS-875 part-3,with head frame,winch monting bracket,luminaries carriage suitable to install 6 nos luminaires in a symmetrical arrangement with top dia meter 150 mm and bottom 360 mm complete all as specified and directed. Note - Incoming electric supply cable will be measured & paid seperately.

Supply and fix raising lowering system comprising double drum winch, 6mm dia stainless stell wire rope ,trailling cable, connector, integral power tool motor, manual handle junction box lighting finial,counter weight all as per manufacturer instruction complete all as specified and directed.

Material and loabour for erection of high mast with the help of suitable tools and plants, wiring of luminaire with feeder pillar with all wiring materials like PVC insulated, PVC sheathed flexible copper conductor cable with lugs & MCB complete all as specified and directed. Note : Hyadra shall be arranged by contractor.

Supply and fix in replacement 200-210 Watt LED flood light with pressure die-cast aluminium housing, complete with all accessories, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65 flood light with high power LEDs as light source, suitable for highlighting architectural facade highmast and general purpose lighting with Turo Floodlight luminaires with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion and IP 66 Protection fixed in existing clamp and connecting with existing cable, including nuts, bolts and washer etc complete all as specified and directed. Make : Havells (Ordering Code - LHFPCZBFP46J200) or equivelent make as mentioned in Appx 'B' to PS.

Supply and fixing foundation bolts manufactured from special steel along with nuts, washers, anchor plates and common templates 6 nos set with PCD 445 mm, type TS 600, 24 mm dia, length 850 mm long complete all as specified and directed.

Supply and laying in replacement XLPE insulated PVC inner sheathed, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium multi stranded conductor 1100 volt grade of size 25 Sqmm 4 core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing complete all as specified and directed. Note:-Excavation, earthwork, will be measured and paid separately under respective items of this schedule.

Material & labour for construction of shallow foundation with M25 grade concrete for the highmast considering the safe soil bearing capacity including excavation, returning & filling PCC, RCC, reinforcement, removal & form work etc complete all as per drawing and as specified and directed.

Supply & fix single dome aviation obstruction light LED type with all supporting accessories complete all as specified and directed.

Excavation in trenches not exceeding 1.5m width and not exceeding 1.5 m in depth and getting out in soft/loose soil for taking out / laying cable / pipe etc complete all as specified and directed.

Returning, filling including spreading, levelling watering & well ramming in layers not exc. 25cm for soft/loose soil complete all as specified and directed.

Removal of excavated material at a distance not exc 50 mtr and dipositing where directed at a level not exc. 1.5 mtr above the starting point for soft / loose soil complete all as specified and directed.

M&L for sand cushioing to underground cable in trench complete all as specified and directed.

Supplying and laying reinforced precast concrete cable cover, class LV Type 2, flat, size 300mm x 180mm x 40mm complete all as specified and directed.

Supply and lay in trenches in road cross / floor etc. galvanished iron light grade tube 50mm bore with all fittings for protection of cable complete all as specified and directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground vertically to depth not less than 2.5m below normal ground level with top edge of the earth plate at a depth not less than 1.5m below ground level connected to and including 25X4 GI iron strip by means of bolts nuts, check nuts and washer etc made of GI and connected to test point and earth dolly all as shown in electrical plate No 5 of MES SSR Part I, 1991 including excavation and earth work in any type of soil PCC (1:3:6) type C1 (using 20mm graded stone aggregates) in chamber, precast RCC 50mm thick in cement concrete (1:2:4) type B1 (using 20mm grade stone aggregrates), reinforced with welded steel wire fabric or XPM (weight not less than 4 KG/Square meter) with cast iron frame, funnel with wire mesh, 20 mm bore medium grade GI watering pipe, lugs, 15mm bore medium grade GI protection pipe, test point etc. complete all as specified and directed.

M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25x4 mm galvanised iron strip complete all as specified and directed.

Supply & install feeder panel by Fabrication of 3.15 mm thick sheet CRCA approved weather proof design framed on angle iron double door both side opening shutters cable entry with glands, foundation / grouting on & including PCC as per site requirement having Aluminium bus bar of 100 A capacity with 32 A TPN MCB incomer, single dial time switch, 22A TP contactor for automatic switching of luminaries, power tool control with 2 no 9A contactor and raise lower push button colour code insulation sleeves R,Y, B, N & Connecting of Cable by suitable lugs, connectors, insulator testing complete all as specified and directed.

Supply and installation, testing, commissioning outdoor type cubical type LT Panel made out of 3.0mm thick CRCA sheet, 415 Volt, 3 phase, 50 HZ supply factory made of MS angle section 40x40x5mm frame with front and back openable double door with provision of locking arrangement dust & vermin proof, gasket, TPN busbar shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on proper insulator, gland, welding hinges of dust proof duly spray painted inside and outside of panel with one coat of red oxide primer and two coat of synthetic enamel paint grey complete all as specified and directed & Consisting of the following accessories:-

(C) Outgoing:(I) MCCB 63 Amp,Icu-16KA, 4 pole, 415 volts - 04 Nos (ii) MCB SPN, 20 Amp - 01 Nos complete all as specified and directed. Note: (i) PCC 1:2:4 for grouting included in the total cost of Panel (ii) Excavation and earth included in total cost (iii) Necessarty lugs for cable fitment included in total cost of panel (iv) FRLS copper conductor cable of suitable size shall be used for Control wiring for LT panel complete for incoming/outgoing.

M&L for point wiring with PVC insulated and unsheathed multi stranded FRLS copper conductor single core 1.5sqmm (nominal area) cable using approved colour code as per IS drawing in concealed conduit with all accessories including providing sunk cast pressed steel terminal boxes of suitable size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing 3 mm thick plastic laminated Bakelite sheet (HYLUM BRAND) top cover along with copper earth wire PVC insulated & unsheathed multi stranded (FRLS) copper conductor cable of size 1.5sqmm as continuous earth wire connected to common earth and earth dolly complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper / white washing / colour washing to match with the existing surface complete all as specified and directed.

One Light/Fan point controlled by one switch

One 3 pin 5 Amp socket out let controlled by one 5 amp switch on independent board

M&L for point wiring with PVC insulated and unsheathed multi stranded FRLS copper conductor single core 2.5sqmm (nominal area) cable using approved colour code as per IS drawing in concealed conduit with all accessories including providing sunk cast pressed steel terminal boxes of suitable size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing 3 mm thick plastic laminated Bakelite sheet(HYLUM BRAND) top cover along with copper earth wire PVC insulated & unsheathed multi stranded (FRLS) copper conductor cable of size 2.5sqmm as continuous earth wire connected to common earth and earth dolly complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper / white washing / colour washing to match with the existing surface complete all as specified and directed.

M&L for Ceiling rose, 2 to 3 terminal PVC/ polycarbonate , isolated body type suitable for AC 230 volts complete all as specified and directed.

M & L for module cover plate with frame as per site requirement for following module:-

2 module

3 module

4 module

6 module

8 module

M & L for Modular metal Flush box as per site requirement.

1/2 module

3 module

4 module

8 module

M & L for modular switch 1 way 6 Amp 1 Module complete all as specified and directed. Make : Legrand Arteor series Cat Part No : 573400 or equivalent make as mentioned in Appx 'B' to PS.

M & L for modular switch 1 way 16 Amp 1 Module complete all as specified and directed. Make : Legrand Arteor series Cat Part No : 573400 or equivalent make as mentioned in Appx 'B' to PS.

M &L for Modular Socket 6A 2/3 Pin universal 2 module complete all as specified and directed. Make : Legrand Arteor series Cat Part No : 573470 or equivalent make as mentioned in Appx 'B' to PS.

M &L for Modular Socket 16A/ 6A 2/3 Pin combined 2 module complete all as specified and directed. Make : Legrand Arteor series Cat Part No :-573471 or equivalent make as mentioned in Appx 'B' to PS.

S&F energy efficient LED tube light fitting integrated batten type with built in LED Chip & integral LED driver 20 watt, channel housing & diffuser of length 1200 mm (approx.) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed. Make -Wipro cat part No.LL20-221-XXX-65NE3/Philips cat part no. BN O21C LED120S PSU CDL/NW GR(6500K) / HAVELLS or equivalent make as mentioned in Appx 'B' to PS.

M&L Sub main wiring using PVC insulated and unsheathed multi stranded FRLS copper conductor cable using approved colour code as per IS drawing in and incl PVC casing and capping of suitable size with all accessories and making good disturbed surfaces of wall, floor or ceiling with plaster and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete as specified and as directed of the following sizes of cables:-

Using two single core PVC insulated FRLS cable 2.5 sqmm copper conductor multi stranded and 2.5 sqmm copper conductor insulated cable using as earth wire Note :2 runs of 2.5sqmm copper cable & 1 run of 2.5 sqmm copper cable and one run of casing & caping shall be measured as one unit

M & L for distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 8 way with 100 Amps rated copper busbar, neutral bar, earth bar and cable ties for cable management, reversible door for IP 43 & IP 54, single pole and neutral 250 Volts, flush to wall complete with IP 54 protection complete all as specified and directed. Make : Legrand Model: IP 54 IK 09 507641 Ekinox or equivalent make as mentioned in Appx 'B' to PS.

M&L for MCB single pole & neutral 240 volt C curve 10 KA (32 to 63) Amps capacity IP 20 complete all as specified and directed.

M&L for MCB single pole,5 to 30 Amp 240 volt B curve 10 KA, IP 20 complete all as specified and directed.

S&F LED Flood Light fitting 210 watt, for opearting voltage between 110V to 320V system efficiency not less than 120 lumen / watt, PF-0.95 minimum, IP66 protection, 5700CCT(K), CRI between 80-85,confirming to LM79 and LM 80 standards or as per IS-16104:2012 and IS-16106:2012,for estimated life span of minimum 50,000 hrs consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with LED street optics LENS for uniform light distribution, weather proof gasket for lamp & driver compartment, Heat resistance toughened UV stabilized glass fitted in cast aluminium housing with SS screws, fixed on existing bracket & connecting including taking down old light fitting of any description complete all as specified and directed.

DWARKADHISH ENTERPRISE

jagdish machinery stores

SURESH ELECTRICALS

Prime Decor

Nitesh Enterprise