Annual Rate contract for Erection and Maintenance work of HT/LT Line and TC Structure and Laying, Testing & Commissioning of 11/22KV underground XLPE cable with cable end termination & straight though jointing kits Work Under ND SR No 11517355 and Other Scheme Under Dahej Sub Division Only under Bharuch Rural Division.

SCHEDULE-B Tender No BRH-2026-27-94

Labour rates for Annual Rate contract for Erection and Maintenance work of HT/LT Line and TC

Structure and Laying, Testing & Commissioning of 11/22KV underground XLPE cable with cable end

termination & straight though jointing kits Work Under ND SR No 11517355 and Other Scheme Under

Dahej Sub Division Only under Bharuch Rural Division.

::DGVCL Circular of Revised SOR rates for the year 2024-25::

1) Letter No: DGCS/1408/01/2025 Approved Date: 27-01-2025, 2) Letter No: DGCS/1411/01/2025

Approved Date: 27-01-2025 3) Letter No: DGCS/1408/01/2025 Approved Date: 27-01-2025

The Labour rates are excluding of GST.

(A). CAPITAL WORK LABOUR RATES

HT TAPPING FROM THE EXISTING POLE INCLUDING FIXING

OF CROSS ARMS, CLAMPS ANTI-CLIMBING DEVICES, DANGER

BOARD, INSULATORS ETC. COMPLETE AND PAINTING OF

FABRICATED MATERIALS AND NUMBERING COMPLETE WITH

COST OF PAINTS AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF PSC POLES OF 8 *200 KG INCLUDING

EXCAVATION OF PIT AND REFILLING OF EARTH, FIXING

OFCROSS ARMS, TOP FITTING CLAMPS ANTI-CLIMBING

DEVICES, INSULATORS ETC. COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND

ERECTION OF STEEL POLES OF 9 TO 11 METERS INCLUDING

EXCAVATION OF PIT AND REFILLING OF EARTH, FIXING

OFCROSS ARMS, TOP FITTING CLAMPS ANTI- CLIMBING

DEVICES, DANGER BOARD, INSULATORS ETC. COMPLETE AND

PAINTING OF STEEL POLE, FABRICATED MATERIALS USED ON

THE POLEAND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF

GUY SET AND EARTHING.

ERECTION OF STEEL POLE OF 13 METERS FOR RAILWAY

CROSSING ON BG/MG/NG LINE FOR 0.400/11/22KV OVERHEAD

LINES I.E INCLUDING EXCAVATION OF PIT & REFILLING OF

EARTH, FIXING CROSS ARMS, TOP FITTING CLAMPS, ANTI-

4 9926000004 CLIMBING DEVICES DANGER BOARD, INSULATORS ETC. No.

COMPLETE AND PAINTING OF STEEL POLES, FABRICATED

MATERIALS USED ON THE POLES AND NUMBERING WITH

COSTOF PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE OF 8 METERS

KG PSC POLES INCLUDING EXCAVATION OF PITS & REFILLING

OF EARTHING, FIXING OF CHANNELS, SUPPORTING

ANGLES,CLAMPS, ANTI-CLIMBING DEVICES DANGER

5 9926000005 BOARDS,INSULATORS ETC.COMPLETE AND PAINTING OF No.

FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND

EARTHING.(WITHOUT AB SWITCH)

File No: DGVCLDBHR/TEN/e-file/4444/2026/2841/Technical

Approved By: Executive Engineer,Technical,DGVCLDBHR

Letter No: DGVCLDBHR/0082/09/2026 Approved Date: 03-09-2026 02:55

ERECTION OF DOUBLE POLE STRUCTURE OF 9 TO

11 METERS.STEEL POLE INCLUDING EXCAVATION OF PITS &

REFILLING OFEARTH, FIXING OF CHANNELS, SUPPORTING

ANGLES, CLAMPS,ANTI-CLIMBING DEVICES DANGER BOARDS,

6 9926000006 INSULATORS ETC.COMPLETE & PAINTING OF No.

POLES,FABRICATED MATERIALSUSED ON THE POLES AND

NUMBERING WITH COST OF PAINTSAS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND

EARTHING.(WITHOUT AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING

OF AB SWITCH, HG FUSES OF 8 MTRS 200 KG PSC POLES

INCLUDING EXCAVATION OF PITS AND REFILLING OF

EARTH,FIXING OF CHANNELS SUPPORTING ANGLES, CLAMPS,

ANTI- CLIMBING DEVICES, DANGER BOARDS,

INSULATORS,DOFUSES ETC. COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING WITH COSTOF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDINGOF ERECTION OF GUY SET

AND EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING

OF AB SWITCH,HG FUSES, 9 TO 11 METERS STEEL POLES

INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH,

FIXING OFCHANNEL, SUPPORTING ANGLES, CLAMPS, ANTI-

8 9926000008 CLIMBING DEVICES , DANGER BOARDS, INSULATORS, ETC. No.

COMPLETE AND PAINTING OF POLES FABRICATED MATERIALS

USED ON THE POLES AND NUMBERING WITH COST OF PAINT

AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING

OFAB SWITCH, HG FUSES, TRANSFORMERS, LIGHTENING

ARRESTORS, DISTRIBUTION BOX. OF 8 METER, 200KG PSC

POLE METERS POLES INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, CARTING OF TRANSFORMERS

FROMSTORES TO SITE, FIXING OF CHANNELS, SUPPORTING

ANGLES, BRACINGS CROSS ARMS CLAMPS, ANTICLIMBING

DEVICES DANGER BOARDS, CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS

USEDON THE POLES AND NUMBERING WITH COST OF PAINT

AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING

OF AB SWITCH,HG FUSES TRANSFORMERS, LIGHTENING

ARRESTORS, DISTRIBUTION BOX 9 TO 11 METERS STEEL

POLES INCLUDING EXCAVATION OF PITS & REFILLING OF

EARTH CARTING OF TRANSFORMERS FROM STORE TO SITE,

FIXINGOF CHANNELS SUPPORTING ANGLES, BRACING, CROSS

ARMS,CLAMPS, ANTICLIMBING DEVICES, DANGER

BOARDS,CONDUCTOR AND CABLE WIRING ETC. COMPLETE

AND PAINTING OF POLES FABRICATED MATERIALS USED ON

THE POLES AND NUMBERING AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTIONS OF GUY SETS

ERECTION OF GUY SET INCLUDING EXCAVATION OF PITS &

REFILLING OF EARTH AS PER STANDARD SPECIFICATION

11 9926000011 WITH STAY CLAMPS, STAY WIRE, ANCHOR ROD, TURN No.

BUCKLE, EYEBOLT, GUY INSULATOR, CEMENT CONCRETE

BLOCK ETC. BUT EXCLUDING CONCRETING.

CONCRETING OF POLES, GUYS, ETC. INCLUDING COST OF

CEMENT SAND METAL (1:2:4) AND WATER ETC. AS PER

STANDARD SPECIFICATION.(cement Should be 53 grade) used

for Concreting.

ERECTION OF COIL TYPE EARTHING INCLUDING COST OF

13 9926000013 COAL,SALT ETC. BUT WITHOUT COST OF GI WIRE AS PER No.

STANDARD SPECIFICATION(20kg solt+20kg coal)

ERECTION OF GI PIPE/CI PLATE TYPE EARTHING

INCLUDINGCOST OF COAL SALT ETC. BUT WITHOUT COST OF

14 9926000014 PIPE/GIPLATE GI WIRE AS PER STANDARD SPECIFICATION. No.

(20kg solt+20kg coal)

File No: DGVCLDBHR/TEN/e-file/4444/2026/2841/Technical

Approved By: Executive Engineer,Technical,DGVCLDBHR

Letter No: DGVCLDBHR/0082/09/2026 Approved Date: 03-09-2026 02:55

ERECTION OF STREET LIGHT FIXTURE COMPLETE WITH

CLAMPS, BRASS NIPPLE, BRASS HOLDER TECK WOOD

BUSH,REFLECTORS FUSE, WIRING ETC. AS PER STANDARD

SPECIFICATION BUT EXCLUDING COST OF MATERIALS.

STRINGING OF(30mm2)ACSR/34MM@,55MM2 AAA

CONDUCTOR for ALL TYPE OF CONDUCTOR (EXCEPT DOG

CONDUCTOR) FOR 11/22KV & LT LINES INCLUDING FIXING OF

INSULATORS, BINDING JUMPERING ETC.

STRINGING OF GI WIRE 8 SWG INCLUDING BINDING

PROVIDING SINGLE PHASE SERVICE CONNECTION WITH PVC

2.5/4MM2 TWIN CORE CABLE FROM TERMINAL POLE TO

18 9926000018 METERING POINT INCLUDING FIXING OF METER WITH METER No.

EARTHING COMPLETE WORK AS PER STANDARD

SPECIFICATION BUT EXCLUDING COST OF MATERIALS.

PROVIDING THREE PHASE 4 WIRE SERVICE CONNECTION

WITH PVC 4MM2/10MM2 FOUR CORE CABLE FROM TERMINAL

19 9926000019 POLE TO METERING POINT INCLUDING FIXING OF METER No.

WITH METER EARTHING COMPLETE WORK AS PER STANDARD

SPECIFICATION BUT EXCLUDING COST OF MATERIALS.

ADDITIONAL COST FOR EXCAVATION OF PIT IN HARD ROCK

AREA FOR ERECTION OF POLE/ GUY ETC. AS PER STANDARD

SPECIFICATION OVER & ABOVE NORMAL COST COVERED

AGAINST EXCAVATION OF PIT UNDER NORMAL SOIL FOR

ERECTION OF POLE, GUY, DOUBLE POLE STRUCTURE

EARTHING WITH THE APPROVAL OF SUPDT.ENGINEER.

21 9926000021 PROVIDING GUARDING TO HT LINE ON ROAD/ RAIL CROSSING. MTR

PROVIDING GUARDING OF LT LINES ON ROAD/RAIL

23 9926000023 LT LINE TAPPING- SINGLE PHASE No.

24 9926000024 LT LINE TAPPING- THREE PHASE No.

Stringing/LAYING OF OVER HEAD LT CABLE FOR ROAD

25 9926000025 CROSSING,HT LINE CROSSING AND TELEPHONE LINE No.

CROSSING ETC.(PER SPAN)

ERECTION OF SINGLE POLE STRUCTURES WITH, HG FUSES,

TRANSFORMERS, LIGHTENING ARRESTOR, DISTRIBUTION

BOX. ON 8 METERS 200 KGAND PSC POLE INCLUDING

EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROM STORES TO SITE, FIXING OF

CHANNELS, SUPPORTING ANGLES, BRACINGS CROSS ARMS

CLAMPS, ANTICLIMBING DEVICES DANGER BOARDS,

CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND

PAINTING OF FABRICATED MATERIALS USED ON THE POLE

AND NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OFGUY SETS AND

ERECTION OF SINGLE POLE STRUCTURES WITH MOUNTING

OFAB SWITCH , HG FUSES, TRANSFORMERS,

LIGHTENINGARRESTOR, DISTRIBUTION BOX. ON 9 to

11 METERS RSJ POLE INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, CARTING OF TRANSFORMERS FROM

STORES TO SITE, FIXING OF CHANNELS, SUPPORTING

ANGLES, BRACINGS CROSS ARMS CLAMPS, ANTICLIMBING

DEVICES DANGER BOARDS, CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS

USED ON THE POLE AND NUMBERING WITH COST OF PAINT

AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OFGUY SETS AND EARTHING.

ERECTION OF PSC POLES OF 10 *270 KG INCLUDING

EXCAVATION OF PIT AND REFILLING OF EARTH, FIXING OF

CROSS ARMS, TOP FITTING CLAMPS ANTI-CLIMBING DEVICES,

INSULATORS ETC. COMPLETE AND PAINTING OF FABRICATED

MATERIALS USED ON THE POLES AND NUMBERING WITH

COST OF PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND EARTHING.

File No: DGVCLDBHR/TEN/e-file/4444/2026/2841/Technical

Approved By: Executive Engineer,Technical,DGVCLDBHR

Letter No: DGVCLDBHR/0082/09/2026 Approved Date: 03-09-2026 02:55

ERECTION OF DOUBLE POLE STRUCTURE OF 10 METERS

KG PSC POLES INCLUDING EXCAVATION OF PITS & REFILLING

OF EARTHING, FIXING OF CHANNELS, SUPPORTING

ANGLES,CLAMPS, ANTI-CLIMBING DEVICES DANGER

29 9926000029 BOARDS,INSULATORS ETC.COMPLETE AND PAINTING OF No.

FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND

EARTHING.(WITHOUT AB SWITCH)

STRINGING OF 100MM2 ACSR/100MM2 AAAC CONDUCTOR ONE

30 9926000030 FOR 11/22KV & LT LINES INCLUDING FIXING OFINSULATORS, COND

BINDING JUMPERING ETC. PER KM

STRINGING OF DOG CONDUCTOR FOR 11/22KV & HT LINES ONE

31 9926000031 INCLUDING FIXING OF INSULATORS, BINDING JUMPERING COND

ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING

OF AB SWITCH, HG FUSES, TRANSFORMERS, LIGHTENING

ARRESTORS, DISTRIBUTION BOX. OF 10 METERS 270 KGAND

PSC POLES INCLUDING EXCAVATION OF PITS AND REFILLING

OF EARTH, CARTING OF TRANSFORMERS FROMSTORES TO

SITE, FIXING OF CHANNELS, SUPPORTING ANGLES, BRACINGS

CROSS ARMS CLAMPS, ANTI-CLIMBING DEVICES, DANGER

BOARDS, CONDUCTOR AND CABLE WIRING ETC.COMPLETE

AND PAINTING OF FABRICATED MATERIALS USED ON THE

POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF

GUY SETS AND EARTHING.

DISMENTALLING OF 8 MTR PSC POLE WITH CREDITING OF

33 9926000033 FABRICATION AT STORE & STACKING OF POLE SAFELY ON No.

ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF 10 MTR PSC POLE WITH CREDITING OF

34 9926000034 FABRICATION AT STORE & STACKING OF POLE SAFELY ON No.

ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC

POLE) (WITH TRANSFORMER) WITH CREDITING OF

35 9926000035 FABRICATION & TRANSFORMER AT STORE & STACKING OF No.

POLE SAFELY ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC

POLE) (WITHOUT TRANSFORMER) WITH CREDITING OF

FABRICATION AT STORE & STACKING OF POLE SAFELY ON

ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

STRINGING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM

INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN

SUSPENSION / TENSION CLAMP, FIXING OF CROSS ARM, LT

SHACKLE INSULATOR ETC. FOR FIXING OF MESSENGER WIRE

AND TO PROVIDE SERVICE CONNECTION ON AERIAL

BUNCH CABLE BY INSULATED PIERCEING CONNECTORS

THROUGH SERVICE CONNECTION BOX COMPLETE AS

REQUIRED & DIRECTED BY ENGINEER IN CHARGE.

STRINGING OF LT ABC OF 3*50 SQ MM +1*25 SQ MM+1*35 SQ

MM INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL

DESIGN SUSPENSION / TENSION CLAMP, FIXING OF CROSS

ARM, LT SHACKLE INSULATOR ETC. FOR FIXING OF

38 9926000038 MESSENGER WIRE AND TO PROVIDE SERVICE CONNECTION KM

ON AERIAL BUNCH CABLE BY INSULATED PIERCEING

CONNECTORS THROUGH SERVICE CONNECTION BOX

COMPLETE AS REQUIRED & DIRECTED BY ENGINEER IN

STRINGING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM

INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL

DESIGN SUSPENSION / TENSION CLAMP, FIXING OF CROSS

39 9926000039 ARM, BINDING TO PIN INSULATOR,PREPARING SHACKLE KM

POINT,JUMPERS ETC. AS REQUIRED & DIRECTED BY

ENGINEER IN CHARGE

File No: DGVCLDBHR/TEN/e-file/4444/2026/2841/Technical

Approved By: Executive Engineer,Technical,DGVCLDBHR

Letter No: DGVCLDBHR/0082/09/2026 Approved Date: 03-09-2026 02:55

STRINGING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM

INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN

SUSPENSION / TENSION CLAMP, FIXING OF CROSS ARM,

BINDING TO PIN INSULATOR,PREPARING SHACKLE

POINT,JUMPERS ETC. AS REQUIRED AND DIRECTED BY

ENGINEER IN CHARGE

STRINGING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+ 35 SQ

MM INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL

DESIGN SUSPENSION / TENSION CLAMP, FIXING OF CROSS

ARM, LT SHACKLE INSULATOR ETC. FOR FIXING OF

41 9926000041 MESSENGER WIRE AND TO PROVIDE SERVICE CONNECTION KM

ON AERIAL BUNCH CABLE BY INSULATED PIERCEING

CONNECTORS THROUGH SERVICE CONNECTION BOX

COMPLETE AS REQUIRED & DIRECTED BY ENGINEER IN

DISMENTALING OF RSJ (9/11 METER) POLE AND CREDITING

THE OLD MATERIAL TO STORE

DISMENTALING OF TRANSFORMER CENTER ON 10MTR,270KG

PSC POLE(WITHOUT TRANSFORMER) WITH CREDITING OF

FABRICATION AT STORE AND STACKING OF POLE SAFELY ON

ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTALING OF TRANSFORMER CENTER ON 10MTR,270KG

PSC POLE(WITH TRANSFORMER) WITH CREDITING OF

FABRICATION AT STORE AND STACKING OF POLE SAFELY ON

ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTLING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM AND

45 9926000045 CREDITING FITTING OF ALL ACESSARIES AND FABRICATION KM

TO DEPARTMENTAL STORE

DISMENTLING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM AND

46 9926000046 CREDITING FITTING OF ALL ACESSARIES AND FABRICATION KM

TO DEPARTMENTAL STORE

DISMENTALING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM AND

47 9926000047 CREDITING FITTING OF ALL ACESSARIES TO DEPARTMENTAL KM

DISMENTALING OF LT ABC OF 3*50 SQ MM +1*25 SQ MM+1*35

48 9926000048 SQ MM AND CREDITING FITTING OF ALL ACESSARIES TO KM

DEPARTMENTAL STORE.

DISMENTALING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+

49 9926000049 SQ MM AND CREDITING FITTING OF ALL ACESSARIES TO KM

DEPARTMENTAL STORE.

RESTRINGING OF ALL TYPE OF CONDUCTOR (EXCEPT DOG ONE

50 9926000050 CONDUCTOR) FOR 11/22KV & LT LINES INCLUDING FIXING OF COND

INSULATORS, BINDING JUMPERING ETC. PER KM

RESTRINGING OF DOG CONDUCTOR FOR 11/22KV HT LINES

INCLUDING , BINDING JUMPERING ETC.

LABOUR CHARGE FOR THE INSTALLATION OF NEW DTR

METER. (METER WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR THE REPLACEMENT OF DTR METER

53 9926000053 AND OLD METER SHOULD BE CREDITED TO SDN STORE. No.

(METER WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR PROVIDING CT COIL FOR DTR METER

CONNECTION. (CT COIL WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR REPLACEMENT OF CT COIL FOR DTR

55 9926000055 METER CONNECTION AND OLD CT SHOULD BE CREDITED TO PER CT

SDN STORE. (CT COIL WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR FIXING OF MMB FOR DTR METER (MMB

WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR REPLACEMENT OF DTR METER BOX.

(METER WILL BE PROVIDED BY DGVCL)

PROVIDING / REPLACEMENT OF 1.5 SQ MM 10 CORE COPPER

58 9926000058 CABLE 3.5 METER (CABLE TO BE PROVIDED BY AGENCY) No.

LABOUR CHARGE FOR PROVIDING/RECONNECTION OF PER

59 9926000059 TERMINAL CONNECTION WITH PROPER SIZE OF LUGS. (LUGS TERMINA

COST IS BORNE BY AGENCY) TION

File No: DGVCLDBHR/TEN/e-file/4444/2026/2841/Technical

Approved By: Executive Engineer,Technical,DGVCLDBHR

Letter No: DGVCLDBHR/0082/09/2026 Approved Date: 03-09-2026 02:55

LABOUR CHARGE FOR THE SPOT READING OF DTR METER

WITH DETAIL SURVEY OF DEFECT IF ANY. A DULY SIGN COPY

BY SURVEYOR PERSON OF AGENCY IN PRO- FORMA REPORT

60 9926000060 SHOULD BE SUBMITTED TO SDN OFFICE.(* ONLY IF ALL PER DTR

PARAMETER OF VOLTAGE, CURRENT & LOAD AS SHOWN IN

PER-FORMA IS FILLED) AS PER THE INSTRUCTION OF

ENGINEER IN-CHARGE.

LABOUR CHARGE FOR THE SPOT READING OF DTR METER

WITH DETAIL SURVEY OF DEFECT IF ANY. A DULY SIGN COPY

BY SURVEYOR PERSON OF AGENCY IN PRO- FORMA REPORT

SHOULD BE SUBMITTED TO SDN OFFICE. (DULY FILL PER-

FORMA IN FAULT CONDITION IN WHICH READING

PARAMETER IS NOT SHOWN IN METER)

INSTALLATION OF DTR METER INCLUDING METER BOX,

PROVIDING & FIXING OF 1.5SQ MM SINGLE STRAND 10 CORE

62 9926000062 ARMOURED COPPER CABLE (3.5METER), TERMINATION IN No.

METER & COIL ETC.(METER, METER BOX, C.T./P.T. COIL WILL

BE PROVIDED BY DGVCL)

INSTALLATION OF DTR METER INCLUDING METER BOX,

TERMINATION IN METER & COIL ETC. (WITHOUT 10CORE

COPPER CABLE) (METER, METER BOX, C.T./P.T. COIL WILL BE

PROVIDED BY DGVCL)

Binding of messenger Conductor at with a distance not more than

64 9926000064 0.75 mtr with 6 turns minimum on XLPE Cable with single strand No

binding wire (including cost of binding wire)

Supply and Installation of 11/22 kV Distribution Transformers HT

65 9926000086 Terminal protector (UV Resistance) with using 95/120/150 sq.mm PER SET

long barrel aluminium lug. (1Set = 3 Nos i.e. on R, Y, B)

Supply & Installation of HT EPR Tap on 11/22 kV Distribution

Transformer with replacement of bare conductor by HT ABC

66 9926000087 conductor (DO bottom side to transformer) after removal of PER SET

semiconductor by HT ABC (6 inch both side). HT ABC to be

supplied by DGVCL. (1Set = 3 Nos i.e. on R, Y, B)

Supply, Installation, Testing and Commissioning of Maintenance

Free, Ready Capsule, Pipe-In- Cage (Pic) Type, Earth Electrodes

67 9926000088 for HT Feeder Pole Having 2000 mm Electrode Length as per the NO

Tender Specifications and Drawing. (All Materials Will Be Supplied

Supply, Installation, Testing and Commissioning of Maintenance

Free, Ready Capsule, Pipe-In- Cage (Pic) Type, Earth Electrodes

68 9926000089 for HT Feeder Pole Having 3000 mm Electrode Length as per the NO

Tender Specifications And Drawing. (All Materials Will Be

Supplied By Agency)

Supply and Installation of 25 X 3 mm GI Strip having hot dip-

galvanized-zinc coating of 80-100 microns without any joints or

welding. Both the end of the GI strip should be connected with GI

nut bolts and required fabrication work for giving separate

earthing connections to

(1) Neutral of the transformer

(2) MS structures of the transformer centre (Approximately

meter GI strip per transformer centre

- as per requirement and instruction of Engineer in-

charge) (All Materials will be supplied by Agency)

Supply and Installation of uPVC standard make Pipe of 1.25"

diameter for covering GI strip with UV protected Cable Ties of

70 9926000092 X 7.6 mm size to bind with pole face(Approximately 25 meter uPVC Meter

pipe for GI strip covering per transformer centre -as per

requirement and instruction of Engineer in-charge.

Supply & fixing of up to 33 kV Conductor sleeve for Busbar to

Drop out Fuse and Drop out fuse to Transformer H.T. including

71 9926000093 Busbar (12 mm sleeve) as per technical specification. (All Materials Per TC

will be supplied by Agency)

Supply & fixing of upto 33 kV Conductor sleeve for Busbar to Drop

out Fuse and Dropout fuse to Transformer H.T. without Busbar (12

mm sleeve) as per technical specification. (All Materials will be

supplied by Agency)

File No: DGVCLDBHR/TEN/e-file/4444/2026/2841/Technical

Approved By: Executive Engineer,Technical,DGVCLDBHR

Letter No: DGVCLDBHR/0082/09/2026 Approved Date: 03-09-2026 02:55

Supply & fixing of up to 33 kV Conductor sleeve for Busbar to

Drop out Fuse and Drop out fuse to Transformer H.T. including

Busbar(15 mm sleeve) as per technical specification. (All Materials

will be supplied by Agency)

Supply & fixing of upto 33 kV Conductor sleeve for Busbar to Drop

out Fuse and Drop out fuse to Transformer H.T. without Busbar(15

mm sleeve) as per technical specification. (All Materials will be

supplied by Agency)

Supply & fixing of Disc type Red Colour FRP(Non-flammable)

material with Weather resistant, Non-conductive bird guard

OD=300 MM, ID=33 MM, Width =1.25 MM, one side cut from ID

to OD. (All Materials will be supplied by Agency)

Providing and fixing of LT Terminal protectors i.e. Re-useable boot

76 9926000096 (LT Side 1.1 kV) including LT (1.1 kV) insulating taps. All live part No

at LT side shall be covered with fixing of LT insulating taps.

Nylon Net around Transformer Centre

77 9926000097 Nylon Net (12 * 15 ft) Per Net

78 9926000098 Nylon Dori Per TC

Labour charge for fitting Nylon Net (All fabricated material for

fitting nylon net shall be provided by DGVCL)

(B) LINE MAINTENANCE

80 9924000001 Cutting of Tree branches surrounding HT/LT line Per Tree

Replacement of old jumpers & providing new double jumpers with

8" binding [D Type] & capsuling with PVC pipe etc

82 9924000005 Support pole for Stay PSC/STP/RSJ No.

83 9924000006 Pin binding of conductor 11/22kv Pin insulator No.

Pin binding of conductor 11/22kv Pin insulator per pole in coastal

area with cleaning.

85 9924000008 Pin binding of conductor LT shackle insulator No.

86 9924000009 Replacement of one/both disc. insulator at strain pole No.

87 9924000010 Replacement of LT shackle insulator at cut point No.

88 9924000011 Refixing of V cross Arm No.

89 9924000012 Replacement of V cross Arm (With Transportation & Painting) No.

90 9924000013 Refixing of Top fitting in proper position No.

91 9924000014 Replacement of Top fitting No.

92 9924000015 Replacement of LT cross Arm No.

Providing DO fuse on DP with carting & jumpering (ONE DO

Numbering of pole with paint by preparing back ground of one

colour and have lettering(height 3" * width 0.5") using stencil

95 9924000018 Fixing of MMB(1PH.) at consumer end No.

96 9924000019 Fixing of MMB(3PH.) at consumer end No.

97 9924000020 Replacement of (1ph.) meter for Urban area No.

98 9924000021 Replacement of (1ph.) meter for Rural area No.

painting consumer no. on MMB (Urban) (with letter size height

40mm* width 8mm)

painting consumer no. on MMB (Rural) (with letter size height

40mm* width 8mm)

101 9924000024 Replacement of deteriorated Single phase Service line No.

Fixing of new dist. Box with complete wiring including clamps, nut

Repairing of guarding involving reshaping of bearer wire cross

lacing binding etc.

Painting of steel fabricated material of RSJ DO DP structure with

Painting of steel fabricated material of RSJ pole mounted

transformer double pole structure with paint

106 9924000029 Painting of steel fabricated material of RSJ single pole with paint No.

painting of steel fabricated material of PSC Single pole (HT line)

painting of steel fabricated material of PSC DO DP double pole

painting of steel fabricated material of PSC double pole at pole

mounted transformer with paint

File No: DGVCLDBHR/TEN/e-file/4444/2026/2841/Technical

Approved By: Executive Engineer,Technical,DGVCLDBHR

Letter No: DGVCLDBHR/0082/09/2026 Approved Date: 03-09-2026 02:55

110 9924000033 Providing line separator single phase No.

111 9924000034 Providing line separator three phase No.

Replacement / Providing of stay insulator along with adjustment of

tension in stay wire

Replacement of deteriorated /providing LT dist. Box with new up

to 100KVA capacity & crediting it to store.

Replacement of deteriorated/providing LT dist. Box with new

above 100KVA capacity & crediting it to store.

115 9924000038 Adjustment of tension in stay wire No.

116 9924000039 Refitting of LA No.

Converting pin point to Shackle point including dismantling &

117 9924000040 location

restringing etc.

replacement of 11KV Pin insulator with providing new double pin

replacement of 22KV Pin insulator by new 11kv pin insulator with

spares & providing new double pin binding

120 9924000043 Providing 11kv double disc insulators with binding & restringing No.

Replacement of existing 11kv conductor (all size) with new double

122 9924000046 Plumbing of PSC Pole with straightening at pin point No.

123 9924000047 Plumbing of PSC Pole with straightening at tension point No.

Plumbing of tilted DP structure (PSC/RSJ/STP) with refilling of

stone Murom etc.

Providing new 11kv AB /GO switch with fabrication and insulated

colour code jumper, binding, lugs etc

Replacement of old 11kv AB /GO switch with providing new

insulated jumper, binding, lugs etc

Providing cage type loop guard in vertical LT line with using PVC

127 9924000052 per pole

reel insulators etc

Labour charges for replacement /providing of MMB & service with

all accessories for three phase connection

Labour charges for replacement /providing of MMB & service with

all accessories for single phase connection

Dismantling of existing Dist. X'mer centre(RSJ /STP POLE)

130 9924000055 25/63/100/200 KVA with all fabrication & crediting the old No.

material to store

131 9924000056 Disconnection from LT pole 1 phase No.

Reconnection from LT pole 1 phase ( payment after receipt of R/C

133 9924000058 Disconnection from LT pole 3 phase No.

Reconnection from LT pole 3 phase ( payment after receipt of R/C

Dismantling & removing of service line from pole & crediting to

Dismantling & removing of service line from pole & crediting to

137 9924000062 Reconnection of service line complete with PVC cable (1 Ph) No.

138 9924000063 Reconnection of service line complete with PVC cable (3 Ph) No.

Providing spiral type earthing by G.I. NO 8(weight 2kg -5mtr in

length) with salt and coal 10kg each, including pvc rigid pipe

139 9924000064 20mm dia. ( 1.5mtr length) to pass exposed part of G.I. wire at No.

consumer end with all materials, earth resistance should be less

Providing and fixing of single core 1.5 sq mm single strand copper

insulated cable with cable nail clip for spiral type earthing at

consumer end. The end of G.I. no 8 is to be connected by connector

9924000070 with copper cable of which other end shall be connected to the per meter

earth terminal of meter box. This item shall be used in location

where there is more distance between earth terminal and earthing

terminal of meter. (All materials supplied by contractor)

File No: DGVCLDBHR/TEN/e-file/4444/2026/2841/Technical

Approved By: Executive Engineer,Technical,DGVCLDBHR

Letter No: DGVCLDBHR/0082/09/2026 Approved Date: 03-09-2026 02:55

Stringing of LT ABC of 1*35 SQ MM + 1*25 SQ MM including

fitting of all accessories i.e. special design suspension / tension

clamp, fixing of cross arm, LT shackle insulator etc. for fixing of

messenger wire and inclusive of dismantling charge of existing

141 9924000065 bare conductor and crediting in to store & dismantling of service KM

line from LT bare conductor and to provide service connection on

Aerial Bunch Cable by insulated piercing connectors through

service connection box complete as required & directed by

Engineer in Charge.

Stringing of LT ABC of 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM

including fitting of all accessories i.e. special design suspension /

tension clamp, fixing of cross arm, LT shackle insulator etc. for

fixing of messenger wire and inclusive of dismantling charge of

142 9924000066 existing bare conductor and crediting in to store & dismantling of KM

service line from LT bare conductor and to provide service

connection on Aerial Bunch Cable by insulated piercing connectors

through service connection box complete as required & directed

by Engineer in Charge.

Stringing of 11KV ABC of 3*95 SQ MM +80 SQ MM including

fitting of all accessories i.e. special design suspension / tension

clamp, fixing of cross arm, binding to pin insulator, preparing

shackle point, jumpers etc. and inclusive of dismantling charge of

existing bare conductor and crediting in to store complete as

required & directed by Engineer in Charge

Stringing of 22 KV ABC OF 3*70 SQ MM +95 SQ MM including

fitting of all accessories i.e. special design suspension / tension

clamp, fixing of cross arm, binding to pin insulator, preparing

shackle point, jumpers etc. and inclusive of dismantling charge of

existing bare conductor and crediting in to store complete as

required & directed by Engineer in Charge

Stringing of LT ABC of 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM

including fitting of all accessories i.e. special design suspension /

tension clamp, fixing of cross arm, LT shackle insulator etc. for

fixing of messenger wire and inclusive of dismantling charge of

145 9924000069 existing bare conductor and crediting in to store & dismantling of KM

service line from LT bare conductor and to provide service

connection on Aerial Bunch Cable by insulated piercing connectors

through service connection box complete as required & directed

by Engineer in Charge.

(C) UG CABLE RATES

Labour charge for excavation of cable trench of 400mm width x

1200mm depth, in any type of soil for laying of cable of size up to

240 mm2 (For additional cable 200 mm additional width shall be

considered i.e. half trench length is to be considered)

Labour charge for excavation of cable trench of 600mm width x

1200mm depth, in any type of soil for laying of cable of size up to

240 mm2 (For additional cable 200 mm additional width shall be

considered i.e. half trench length is to be considered)

Labour charge for excavation of cable trench of 400mm width x

1500mm depth, in any type of soil for laying of cable of size up to

240 mm2 (For additional cable 200 mm additional width shall be

considered i.e. half trench length is to be considered)

Labour charge for laying of 11kV / 22 kV XLPE Cable of size up to

240 mm2 & preparation of sand layer 100mm thick, in the cable

trench & covering the cable with 150 mm dia (Inner), thickness

25 mm, 1.0 meter long RCC half round muffs and providing and

fixing of 4inch width yellow colour polyethylene tape with printing

"CAUTION ELECTRIC CABLE BELOW" at 0.75 m depth from

ground surface after laying cable in trench. This will provide

indication that electric cable is passing underground so as to

protect cable from mechanical injuries, refilling the same, as per

Instruction of Engineer in Charge (EIC).

File No: DGVCLDBHR/TEN/e-file/4444/2026/2841/Technical

Approved By: Executive Engineer,Technical,DGVCLDBHR

Letter No: DGVCLDBHR/0082/09/2026 Approved Date: 03-09-2026 02:55

Labour charge for horizontal drilling using Auger

machine without damage to surface road at max 2.0 mtrs depth &

putting of 6.11 kg/cm2 , class-4,Green colour, 110mm O.D.

8.5mm thickness H.D.P.E. pipe confirms to IS 4984- 1987(3rd

revision) and BIS certification and laying of 11KV/22KV XLPE cable

of size up to 240 mm2 in HDPE pipe, as per Site Condition

9925000005 (excluding cost of pipe). The detail map obtained from HDD Meter

machine and excel sheet (hard and soft copy) indicating the

respective depth and distance from adjacent landmark for each

segment for HDD is must require to be submitted. HDD to be

depth 1.5 mtrs to 2.0 mtrs as per site conditions and as per

instruction of EIC.

Labour charge for horizontal drilling manually without damage

to surface road at max 2.0 mtrs depth & putting of 6.11 kg/cm2,

class-4, Green colour, 110mm O.D. , 8.5mm thickness H.D.P.E.

pipe confirms to IS 4984-1987(3rd revision) and BIS certification

and laying of 11KV/22KV XLPE cable of size up to 240 mm2 size, as

per Site Condition (excluding cost of pipe). The detail map and

excel sheet (hard and soft copy) indicating the respective depth

and distance from adjacent landmark for each segment of cable to

be submitted. Drilling to be carried out at depth Minimum 1.2 mtrs

to 2.0 mtrs as per site conditions as per instruction of EIC.

Supply of 6.11kg/cm2 , class-4,Green colour, 110mm O.D. ,

mm thickness H.D.P.E. pipe confirms to IS 4984 and BIS

certification for laying of underground 11KV / 22KV XLPE cable up

to 240 mm2 size.

Labour work for RCC concreting on disputed location and

repairing of damage portion of road crossing for the work carried

out for roads crossing as well as concreting & muffing of

poles including all materials (1:2:4)

Providing & fixing concrete stone route marker of 300 mm width

x 150 mm thick x 650 mm height embedded in earth at least

300 mm below & 350 mm above ground level respectively at

distance approx. 50 meters along the length of cable. The RCC

concreting (1:2:4)(all necessary materials will be in bidder's scope)

of route marker is to be carried out 300 mm width x 150 mm thick

154 9925000009 x 300 mm below ground level as per instruction of EIC. The No.

route marker should be with name of company with approved

yellow colour-DGVCL. The distance from marker to cable and cable

depth with feeder name etc., marked with arrow sign is to be

painted on it. The route marker is to be fixed at location near to

any fixed permanent location (not necessary to fix exact on top of

cable) as per instruction of EIC.

Erection of D.P. (double pole) structure using 9 / 11 Mtr.

RSJ pole with cable connection arrangement along with fitting of

155 9925000010 necessary fabrication for 11KV cable including excavation of pit & No.

refilling of earth as per instruction of EIC. (Exclusive of concreting

& muffing of poles)

Erection of Single pole structure using 9 / 11 Mtr RSJ

pole with cable connection arrangement along with fitting of

156 9925000011 necessary fabrication for 11KV/22 KV cable including excavation of No.

pit & refilling of earth as per instruction of EIC. (Exclusive of

concreting & muffing of poles)

Erection of D.P. (double pole) structure using 8.0 Mtr. PSC

pole with cable connection arrangement along with fitting of

157 9925000012 necessary fabrication for 11KV cable including excavation of pit & No.

refilling of earth as per instruction of EIC. (Exclusive of concreting

& muffing of poles)

Erection of Single pole structure using 8.0 Mtr PSC pole with

cable connection arrangement along with fitting of necessary

158 9925000013 fabrication for 11KV/22 KV cable including excavation of pit & No.

refilling of earth as per instruction of EIC. (Exclusive of concreting

& muffing of poles)

File No: DGVCLDBHR/TEN/e-file/4444/2026/2841/Technical

Approved By: Executive Engineer,Technical,DGVCLDBHR

Letter No: DGVCLDBHR/0082/09/2026 Approved Date: 03-09-2026 02:55

Labour charge for erecting of 11kV / 22 kV XLPE cable of size up

to 240 mm2 on DP Structure with fixing of 02 Nos polymer

cleats on top and middle part. Polymer cleats, nut bolts etc.

fixing material to be provided by contractor.

Providing & fixing of 6.11kg/cm2, class-4, Green colour,

110mm O.D., 8.5mm thickness H.D.P.E. pipe confirms to IS

4984 and BIS certification on the erected DP structure for

the mechanical protection of cable by inserting the cable inside

160 9925000015 HDPE pipe. The HDPE pipe shall be erected in such a way that Per Job

300mm shall be below the ground level and the rest 2700mm shall

be supported on the DP Structure with 01 No Polymer cleat. All

materials including polymer cleat and Nut bolt to be provided by

Providing and fixing of pipe type earthing from 80 mm dia class-

B GI pipe with pit to be filled with salt & coke and construction of

chamber as per DGVCL Drg. No. dg /100 for DP and cable. The

earthing pit should be joined with cable by G.I. strip of size 1”

width & 2 mm thick. All material GI pipe, Coke, Salt etc will be

supplied by bidder.

Supply & fixing of heat shrink type end terminations

162 9925000017 (outdoor) for up to 11kV 3C x 185 mm2 size XLPE cable as per No.

DGVCL technical specification. (Make 3M or Raychem Only)

Supply & fixing of heat & shrinkable end terminations (outdoor)

163 9925000018 for up to 22 Kv 3C x 185 mm2 size XLPE cable as per DGVCL No.

technical specification. (Make 3M or Raychem Only)

Supply & fixing of heat shrink type end terminations (indoor)

164 9925000019 for up to 11kV 3C x 185 mm2 size XLPE cable as per DGVCL No.

technical specification. (Make 3M or Raychem Only)

Supply & fixing of heat & shrinkable end terminations (indoor)

165 9925000020 for up to 22 kV 3C x 185 mm2 size XLPE cable as per DGVCL No.

technical specification. (Make 3M or Raychem Only)

Supply & fixing of heat shrinkable straight through joint for up

166 9925000021 to 11kV 3C x 185 mm2 size XLPE cables per DGVCL technical No.

specification. (Make 3M or Raychem Only)

Supply & fixing of heat shrinkable straight through joint type

167 9925000022 for up to 22kV 3C x 185 mm2 size XLPE cable as per DGVCL No.

technical specification. (Make 3M or Raychem Only)

Labour charge for excavation of 2100mm long x 1200mm wide x

1200 mm deep joint pits for installation of 11kV / 22kV Straight

through joints as per instruction of engineer-in-charge &

covering the cable with 150 mm dia (Outer), thickness

mm, 1.0 meter long RCC half round muffs & refilling same as

per instruction of EIC.

Providing and fixing of insulating bus bar, made from 11KV/22KV

XLPE cable after removal of semi conducting layer and applying of

PVC heat shrinkable anti- tracking core insulating tubing (1.1KV),

on both end terminal using Aluminium long barrel heavy duty up

169 9925000024 to 240 sq mm lugs, Aluminium bus connector. Taping with PG- No.

clamp for bus conductor as per drawing and as per instruction of

EIC. The Aluminium lugs and PG clamp shall be covered with

11KV/22KV HT insulating tapes.(11KV/22KV XLPE cable will be in

scope of DGVCL while all other materials will be in bidder's scope)

Testing of cable at various points and commissioning the feeder

170 9925000025 as per instruction of engineer-in-charge. Test result shall be No.

submitted by contractor with bill.

Preparation and submission of 6 (six) copies, of complete layout

drawings with GIS mapping as per actual cable routing showing

road crossing, HDPE pipe sleeving, jointing locations, markers

File No: DGVCLDBHR/TEN/e-file/4444/2026/2841/Technical

Approved By: Executive Engineer,Technical,DGVCLDBHR

Letter No: DGVCLDBHR/0082/09/2026 Approved Date: 03-09-2026 02:55

Providing and fixing of Sign Board at junction point Made out of

mm aluminium sheet size 750x300 mm (2.5 x 1ft) rectangle, as per

design, pre-treated with phosphate process and acid etching

coated with one coat of epoxy primer and two coats of best quality

paints, reflectorized with Hi-Intensity retro – reflective sheeting as

per the latest and frame fabricated from suitable size iron angle.

The Sign Board is to be fixed on the base prepared from channel

and bracing angles which is grouted by means of cement

concreting of 1:2:4 for size of 300 mm dia x 800 mm height (500

mm to be grouted in ground). The details to be displayed on sign

board will be given by In-charge Engineer.

(a) Hi intensity Micro prismatic Grade

Providing and fixing of Sign Board (Danger Board) on Distribution

Transformer Centres Made out of 2mm aluminium sheet size

300x300mm (1x1ft) as per design, pre-treated with phosphate

process and acid etching coated with one coat of epoxy primer and

173 9925000028 two coats of best quality paints, reflectorized with Hi-Intensity No.

retro- reflective sheeting as per the latest and frame fabricated

from suitable size iron angle. The Sign Board (Danger Board is to

be fixed at the location as per instruction of In-charge Engineer.

(a) Hi intensity Micro prismatic Grade

Providing & fixing of aluminium tag of size 250 mm (L) x 75 mm

(W) from 3 mm aluminium sheet along with 1.0 mm dia aluminium

binding wire for fixing of aluminium tag near end termination joint

174 9925000029 at DP structure for identifying the cable. The details of feeder i.e. No.

11 / 22 KV with feeder name should be punched on the tag by

letter punch of size 16 mm as per instruction of In-charge

Supply & fixing of heat shrink type end terminations

175 9925000030 (outdoor) for 11kV 3C x 240 mm2 size XLPE cable as per No.

DGVCL technical specification. (Make 3M or Raychem Only)

Supply & fixing of heat & shrinkable end terminations

176 9925000031 (outdoor) for 22 kV 3C x 240 mm2 size XLPE cable as per No.

DGVCL technical specification. (Make 3M or Raychem Only)

Supply & fixing of heat shrink type end terminations

177 9925000032 (indoor) for 11kV 3C x 240 mm2 size XLPE cable as per DGVCL No.

technical specification. (Make 3M or Raychem Only)

Supply & fixing of heat & shrinkable end terminations

178 9925000033 (indoor) for 22 kV 3C x 240 mm2 size XLPE cable as per DGVCL No.

technical specification. (Make 3M or Raychem Only)

Supply & fixing of heat shrinkable straight through joint for

179 9925000034 11kV 3C x 240 mm2 size XLPE cable as per DGVCL technical No.

specification. (Make 3M or Raychem Only)

Supply & fixing of heat shrinkable straight through joint type for

180 9925000035 22kV 3C x 240 mm2 size XLPE cable as per DGVCL technical No.

specification. (Make 3M or Raychem Only)

Installation, Testing and commissioning of 11 KV,630 A SCADA

Compatible, RRL type- 3 Way RMU including Two numbers of

earthings as per Drawing (material is in bidder's scope) and as per

DGVCL Technical specification.

Installation, Testing and commissioning of 11 KV,630 A SCADA

Compatible, RRLL type- 4 Way RMU including Two numbers

of earthings as per Drawing (material is in bidder's scope) and as

per DGVCL Technical specification.

Installation, Testing and commissioning of 22KV,630 A SCADA

Compatible, RRL type-3 Way, RMU including Two numbers of

earthings as per Drawing (material is in bidder's scope) and as per

DGVCL Technical specification.

Installation, Testing and commissioning of 22KV,630 A SCADA

Compatible, RRLL type-4 Way, RMU including Two numbers of

earthings as per Drawing (material is in bidder's scope) and as per

DGVCL Technical specification.

Construction of plinth for 11KV, RRL type- 3 Way (i.e. Two

numbers of Isolator & One number of Breaker) Ring Main Unit as

185 9925000042 per DGVCL's technical specification mentioned in drawing no: Drg. No.

11kv-01. All required material will be supplied by contractor.

File No: DGVCLDBHR/TEN/e-file/4444/2026/2841/Technical

Approved By: Executive Engineer,Technical,DGVCLDBHR

Letter No: DGVCLDBHR/0082/09/2026 Approved Date: 03-09-2026 02:55

Construction of plinth for 11KV, RRLL type- 4 Way (i.e Two

numbers of Isolator & Two number of Breaker)Ring Main Unit as

per DGVCL's technical specification mentioned in drawing no:Drg.

11kv-02.All required material will be supplied by contractor.

Construction of plinth for 22KV, RRL type- 3 Way (i.e Two

numbers of Isolator & One number of Breaker) Ring Main Unit as

per DGVCL's technical specification mentioned in drawing no: Drg.

22kv-01. All required material will be supplied by contractor.

Construction of plinth for 22KV, RRLL type- 4 Way (i.e. Two

numbers of Isolator & Two number of Breaker) Ring Main Unit as

per DGVCL's technical specification mentioned in drawing no:Drg.

22kv-02.All required material will be supplied by contractor.

Modifications e.g. Providing and fixing of Terminal protectors i.e.

Re-use able boot (HT Side 11/22KV, LT Side 1.1KV) including

11/22 KV insulating taps and L.T.(1.1 KV) insulating taps ,Busbar,

Tapping from Bus Bar (11/22 KV XLPE cable) through P.G. Clamp

for H.T. Jumper to D.O. Fuse to bushings of Transformer Centre,

providing & Fixing of jumper and providing & fixing of Heat

Shrinkable Anti Tracking Core Insulating Tubing (Insulation Level

189 9925000046 11/22 KV) in H.T. jumper , Clamping arrangement of cable support No.

frame on both side of existing Over Head type Distribution

Transformer to utilize in Under Ground cable network as per

drawing & as per instruction of Engineer in charge. All live parts

i.e. PG-Clamp, connections of D.O. fuses, HT bushings etc. shall be

covered with fixing of 11/22 KV HT insulating tapes. (11/22 KV

XLPE cable will be in scope of DGVCL while all other materials will

be in bidder's scope).

Laying of any size of 11/ 22 KV XLPE /PILC Cable in readymade Per Cable

trench or in open space Per Mtr

191 9925000060 Labour charges for Lying of O/H XLPE cable pole to pole KM

Supply of 150 mm dia (Inner), thickness 25 mm, 1.0 meter long

RCC half round pipe

Laying, Testing & commissioning of Specially designed 11 KV

193 9601000866 55mm2 AAAC Medium Voltage Covered conductor as per the CKM

technical specifications (with accessories)

ESTIMATE COST Thirty Lakh Rupees Only. Rs. 30,00,000/-

1. DGVCL will provide key material like M.S. materials, ABC/Bare conductors, PSC/RSJ Poles, Insulators,

Fabricated materials etc. to the contractor.

2. All fabricated items shall be fabricated as per DGVCL approved drawing and by welding rods

confirming to the relevant ISI specification and as directed by Engineer in charge.

3. Necessary electricity connection for fabrication items shall be provided by DGVCL on payment of

required charge for connection & electricity bill of the same shall be paid by the agency.

4. All the rates are inclusive of PF & Exclusive of GST applicable time to time.

5. All steel material are to be painted as below:

1. Scrubbing of rusted surface properly before applying the paints on to the RSJ poles & steel

fabricated materials of RSJ/PSC poles is must require.

2. Two coats of approved ISI mark red oxide (primer) is to be properly painted for the RSJ poles &

steel fabricated materials of RSJ/PSC poles.

3. Two coats of approved ISI mark silver paint (i.e. triple mangoes or equivalent quality silver paint)

is to be properly painted on to the RSJ poles & steel fabricated materials of RSJ/PSC poles.

6. Cable End Termination and Straight Joint should be of Make 3M or Raychem Only.

Executive Engineer,

Bharuch Rural Division,

DGVCL, Bharuch.

File No: DGVCLDBHR/TEN/e-file/4444/2026/2841/Technical

Approved By: Executive Engineer,Technical,DGVCLDBHR