BED-109/2025-26

New HT line

AAAC 7/3.81 mm (80mm²)

Steel Tubular Pole (9 mtr.)

Muffs with concerete filling

Run Thro' Structures (∆ Formation): on Single Pole Structures (Adopt Eight (8) No. Run -through Structures per Km)-

Cross Arm: [Channel Iron (100x50x6 mm), Length (1270) mm i/c tolerance of 100mm either side x 8 structure

Angel Iron (50x50x6 mm), Length (2x750) mm x 8 structure

Pole top Bracket

11 KV Pin Insulators (Porcelain, 12 KV, 10 KN): 3 No per pole structure

Dead End Structures: (Adopt three (3) No. per Km) on Double Pole (Prefer along road side)

Belt Set- MS Angle Iron : 50X50X6, Length 1800mm X 2 No.

X-Bracing Set - MS Angle Iron: 50x50x6, Length [2125 mmx 2 No.]

X-Arm (Horizontal)- MS Channel Iron: 100X50X6, Length 2340mm X 2 No.

Discs insulator sets on Dead End structures (comprising 1 No. Disc: (Porcelain, BS, 12 KV, 80 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides)

HT Stay / Guy Arrangement

Stay set complete in all repect (1 No. / Single Pole, 4 No. / Double Pole Structures)

Stay Wire (7/3.15 mm) (6.0 kg Per Stay Set)

Earthing

HT Earthing set complete

GI 8 SWG Earth Wire

Cross lacing

Eye hook for Earth wire

Earth wire clamp

MS Channel Iron 75*40*6, Length 1500 mm for earth wire

Half Clamp

Full Clamp

Danger Plate (250x200x1.6 mm)

Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)]

Barbed Wire

Alluminium Paint

Prov. Megger 5000 v

GO AB Switch Unit (11kV, 400A, 25 KA )

X-Arm: [Channel Iron (75x40x6 mm), Length: 2800mm x 4 No. for supporting GO Switch & DO Fuse Unit

Erection for HT line

Transportation for HT line

GST on Erection and Transportation Charges

New LT line

LT 3.5X120MM2 1.1 KV XLPE CABLE ARMOURED (double Circuit)

Steel Tubular Poles (8 mtr)

Muffs with concerete filling

Angle Iron (75x75 x6)mm2 length 1.50 mtr + 0.02 mtr

Capacitor Bank 36 kVAr

Cross Arm: [Channel Iron (100x50x6 mm), Length (1270) mm i/c tolerance of 100mm either side x 8 structure

LT Stay Set

Stay Wire (7/3.15 mm)

Full clamp [2 no. for A.I. 1no. For stay]

LT Cable Jointng kit for LV(tee and straight)

Cleat HDPE for cable support

Kit Kat I.C. 63 Amp

Earthing Set Complete

Pipe HDPE

Route and joint indicating stone

Cost of digging and restoratin charges

Nuts and Bolts of Various Sizes

Aluminium Paint

Prov. Tong tester

Erection for LT cable

Erection for Poles

Erection for LT Stay set

Erection for Earthing set

Transportation for LT line

GST on Erection and Transportation Charges

Distribution Transformer 250kVA

Distribution Transformer (Ordinary), 11/0.4 kV, 250 KVA

Steel Tubular Poles (9 m, Working Load > 200 kgf/m²)

Muffs with concerete filling

X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos]

MS Angle Iron (50x50x6 mm), Length : 2800 mm X 1 Nos] for LA's

X-Arm: [Channel Iron (75x40x4.8 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch

Transformer Bed, Belting & Knee Bracing

X Arm Channel Iron (100X50x6 mm), Length : 2800 mm x 2 Nos for Transformer Bed

X Arm Channel Iron (100X50x6 mm), Length : 460 mm x 2 Nos for supporting main channel of Transformer

MS Angle Iron (50X50x6 mm), Length : 2800 mm x 2 Nos

MS Angle Iron (35X35x5 mm), Length : 460 mm x 2 Nos

MS Angle Iron (50X50x6 mm), Length : 950 mm x 2 Nos for Bed Knee Bracing

CT-PT Combined Unit with HT meter

CT-PT Combined Unit [PT:11 kV/110 V) ; CT:10-400/5A]

Energy meter 3 Phase 4 Wire CT PT Operated HT Meter

PVC Multistrand 4 mm² copper wire with Φ-1 inch GI

X-Arm: [Channel Iron (100x50x6 mm), Length : 2800

X-Arm: [Channel Iron (75x40x6 mm), Length : 2800 mm

X-Arm [Channel Iron (100x50x6 mm), Length : 460 mm

MS Angle Iron (50X50x6 mm), Length: 2800 mm x1 Nos

Transformer LT Distribution Box and G.O. fixing Assembly

MS Angle Iron (50X50x6 mm), Length : 2800 mm x 2 Nos

MS Angle Iron (50X50x6 mm), Length : 450 mm x 1 Nos

GO Switch Handle supporting (Channel Iron (75x40x6mm), Length 460mm

GO AB Switch Unit (11kV, 400A, 25 KA ) tripple Pole O/D type

D.O Fuse Unit

Surge Arrester, 9 kV Station Class (Porcelain Type)

Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.)

Stay set complete

Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set)

Pipe Earthing Set

LT Distribution panel box with MCCB and SFU for 250 KVA

Half Clamp (M.S. Flat 50X6 mm)

Full Clamps (M.S. Flat 50X6 mm)

Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)]

Aluminium Thimble

Aluminium Thimble

Danger Plate

Barbed Wire

LT Cable (3.5 Core) 185 mm²

Aluminium Paint.

LT Switched Capacitors 9 KVAr for 250 KVA (rate per KVAr)

Transformer Bed (Civil Work) & Chain Link fencing , Angle Iron ,Gate etc for transformer fencing

Erection charges for DTR

Transportation charges for DTR

GST on Erection and Transportation Charges

Please Enable Macros to View BoQ information