Mechanical works at Lift Irrigation scheme Hanjiwera Bala of MISD Pattan.

Amount

Fabrication, providing and fitting of M.S Door of size 6' 6'' x 4' (width) by way of cutting and welding of MS angles, MS rectangular strips and MS sheets with following specifications and quantity Frame of MS door to be fabricated out of ISA 40x40x5 Total length of ISA 40x40x5 = 6.5 mtr Total weight of ISA 40x40x5 (@ 3kg/mtr) = 19.5 kgs Frame of two partitions of MS door to be fabricated out of ISA 35x35x5 Total length of ISA 35x35x5 = 10.5 mtr Total weight of ISA 35X35X5 (@2.6 kg/mtr) = 27.5 kgs Two partitions of the MS door to be covered with rectangular sheets of 2mm thickness Total area of rectangular sheets (2mm thickness) = 2.5 sqmtr Total weight of rectangular sheets(2mm thickness) = 38 kgs Securing the rectangular sheets in place by way of providing and fitting of rectangular strips of size 35 x3mm The strips should be fixed around periphery of sheets Total length of 35x3mm rectangular strip = 10.5 mtr Total weight of 35x3mm rectangular strip = 9 kg Total approximate weight of latches and hinges = 3 kgs Total weight = (19.5+27.5+38+9+3)kgs = 97 kgs Contingencies = 3kgs Total = 100 kgs Note: The MS Door should be made as per the actual site conditions and the contractor has to take the measurements before taking up the Job

Fabrication of staircase by way of of cutting and arc welding of mild steel angles, MS hollow sections, square bars The Job also includes two coats of red oxide primer and two coats of enamel paint. Total length of ISA 50x50x5 = 5 mtr Total weight of ISA 50x50x5 = 19 kg Total length of ISA 40x40x5 = 22 mtr Total weight of ISA 40x40x5 = 66 kg Total length of 12mm X 12mm square bars = 56 mtr Total weight of square bars = 62 kgs Total length of 50mm x 50mmx3mm MS square tubing = 11 mtr Total weight of square tubing = 55 kgs Total length of 80mm x 80mmx3mm MS square tubing = 4.5 mtr Total weight of square tubing = 37 kgs Total length of ISMC 100 = 2 mtrs Total weight of ISMC 100 = 19 kg Total weight of 150mm x150mmx8mm Gusset plates = 6 kgs

Fabrication & providing of MS operator sleeping beds by way of cutting and electric arc welding of mild steel angle ISA-40x40x5 with height of 1.5 feet and each end length to be fitted with gusset plates of size 80mm x 80mmx5mm with following specifications a. 6 feet x 5 feet Intermediate horizontal (in plus shape) supporting fabricated out of ISA-40x40x5 Total length of ISA-40x40x5= 11.9mtrs@3kg/m=36kgs Job includes fitting of 6’ X 5’ ply board (19 mm Thick ) to bed and applying of two coats of red oxide primer then shifting of same to site after its fabrication at workshop. The Job also includes providing and fitting of Thermocol and versa matting of 30sft. The firm has also to provide bedding of size 6'x5' consisting of quilt matress, two pillows, two bed sheets, two pillow covers, two quilt covers.

Preparing of surface of door, Staircase, MS bed using blue lamp and metallic sand paper and then applying of two coats of red oxide anti corrosive primer followed by two coats of enamel paint of reputed make. Shade of paint to be specified by the site engineer.

Providing of tools of Taparia/Stanley with following items: a. Ring spanner 30"- 32" - 01 no. b. Ring spanner 24"- 26" - 01 no. c. Flat spanner 24" - 26" - 01 no. d. Flat spanner 20" - 22” - 01 no. e. Flat spanner 14" - 15" - 01 no. d. Combination plier heavy duty - 01 no o. Screw driver 18" & 9" - 01 no each

Providing and fitting of 20W Led light with IP 65 rating. The Job includes wiring of the light with 1sqmm FRLS copper wire and 6A MCB with gang box for ON and OFF operation.

Providing of LED Lantern with Twin Charging mode – Charging Cable or Solar Panel (inclusive of panel) (Syska/ Havells/ Andslite/ Philips)

M/s Sopore Engineering Works

M/S FANCY ELECTRIC AND STEEL FABRICATORS