Shifting and erection of 33 KV , 11 KV and LT 3-Phase overhead lines along E3 Phase-2 , E10 , E11,E15, N3B,N4 , N5 and N9 Roads including dismantling of existing lines and poles obstructing road development works in Amaravati Capital City

Supply, transportation and erection of 12.5 m Spun Pole with working load of 350 kg conforming to IS 1678-1998 and REC specification with latest amendments thereof, in position, aligning and setting to work as per specification, back filling the earth, ramming for consolidation, including cost, conveyance, T&P and labour charges for loading, unloading etc., complete, but excluding pit excavation. [Makes: As per approved makes of APCPDCL]

Excavation of pits in all soils, i.e, mixture of gravel and soft disintegrated rock like shales ordinary gravel, stony earth and earth mixed with fair sized boulders for 12.5 m Spun Poles (2'6"x2'6"x7' or 0.75 m x 0.75 m x 2.1 m) including T&P and labour charges etc., complete.

Supply, transportation and erection of 9.1 m PSCC pole (280 kg) conforming to IS 1678-1998 and REC specification with latest amendments thereof, in position, aligning and setting to work as per specification, back filling the earth, ramming for consolidation, including cost, conveyance, T&P and labour charges for loading, unloading etc., complete. [Makes: As per approved makes of APCPDCL]

Excavation of pits for 9.1 m PSCC Poles 2'x2'x5' or (0.6 m X 0.6 m X 1.5 m) in all soils, i.e, mixture of gravel and soft disintegrated rock like shales ordinary gravel, stony earth and earth mixed with fair sized boulders.

Supply, transportation and erection of 8 m PSCC pole (200 kg) conforming to IS 1678-1998 and REC specification with latest amendments thereof, in position, aligning and setting to work as per specification, back filling the earth, ramming for consolidation, including cost, conveyance, T&P and labour charges for loading, unloading etc., complete. [Makes: As per approved makes of APCPDCL]

Supply, and fixing of 11 kV Polymer Pin Insulator with GI Pin including labour charges etc., complete as per APCPDCL standards.

Supply, and fixing of 11 kV Polymer Disc insulator (C&T) and Fittings (C&T Type metal parts) including labour charges etc., complete as per APCPDCL standards.

Supply, and fixing of LT Pin Insulator with GI Pin including labour charges etc., complete as per APCPDCL standards.

Supply, and fixing of 11KV V 'X' ARM(75X40) WITH CLAMP FOR 9.1 including all accessories as directed by Engineer-In-Charge

Supply, and fixing of 11KV 3Ph HG FuseSets with PolymerType Insulators including all accessories as directed by Engineer-In-Charge

Supply, and fixing of 11KV TOP CLEAT WITH CLAMPS FOR 9.1 POLE including all accessories as directed by Engineer-In-Charge

Supply and laying of 25mm x 6mm GI Flat (1.18Kgs/1Mtr) size Earth wire/Strip in horizontal /Vertical run in Ground/surface/Recess including, riveting, soldering, saddles, making connection etc as required

Supply and laying of CI EARTH PIPE 80 MM DIA 2.5MTS LENGTH including all accessories as directed by Engineer-In-Charge

Supply, paving, stringing & jumpering, testing and commissioning of 55 Sq.mm AAA Conductor conforming to REC specification and IS-398 Part-IV 1994 with latest amendments thereof, including fixing of suitable rollers, bamboos, paving out conductor on suitable supports, providing temporary stays, tensioning, sagging correctly, fixing at strain point, transporting to pin points, binding, rectification of poles, guys and jumpering of various Conductors including cost of conductor, transporting of materials and T&P from road side to location including loading and unloading and providing watch and ward till the lines are handed over to APCPDCL etc., complete for finished item of work. (Make: As per APCPDCL approved make).

Supply and fixing of MS BOLTS & NUTS 5/8 X 4" including labour charges etc., complete as per APCPDCL standards.

Supply and erection of 11KV 200A TT AB SWITCH WITH INSULATORS including labour charges etc., complete as per APCPDCL standards.

Dismantlement of 25 KVA Distribution Transformer on the plinth/pole carefully without causing and damaging to bushing including labour and transport complete including earthing as per department standards.

Erection of 25 KVA Distribution Transformer on the plinth/pole carefully without causing and damaging to bushing including labour and transport complete including earthing as per department standards.

Supply and fixing of MS Flat 50X6 including all accessories as directed by Engineer-In-Charge

Supply and fixing of MS Channel 100X50 including all accessories as directed by Engineer-In-Charge

Supply and fixing of MS ANGLE 50X50X6 including all accessories as directed by Engineer-In-Charge

Supply and fixing of M.S.STAY CLAMPS FOR 8 MPSCC POLES (SET) including all accessories as directed by Engineer-In-Charge

Supply and fixing of 11 kV Tapping Channel Cross arm with clampfor 9.1 including labour charges etc., complete as per APCPDCL standards.

Supply, laying and termination of LT XLPE CABLE SINGLE CORE 150 SQMM XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I

Supply and fixing of MS BOLTS & NUTS 5/8 X 9" including labour charges etc., complete as per APCPDCL standards.

Supply and fixing of MS BOLTS & NUTS 5/8 X 6" including labour charges etc., complete as per APCPDCL standards.

Supply and fixing of 33KV M.S.BACK CLAMPS FOR SPUN POLES including labour charges etc., complete as per APCPDCL standards.

Dismantelling of all the accessories along the N3B Road and handing of dismantelled material to the section office of APCPDCL or as directed by the Engineer-In-Charge.

Supply and erection of M+6 type GI heavy structure tower as per ASCI specifications with minimum weight of WT 1.99 MT and founadtion Pit dimensions of 1.2X1.2X3.3 Mts. i.e. 4.752CUM as per drawing including earthwork excavaion and foundation of Tower as directed by Engineer-In-Charge.

Supply and laying of MS ANGLE 65X65X6 including all accessories as directed by Engineer-In-Charge

Supply and fixing of 11KV 400A CONV. AB SWITCH WITH P.T.I including all accessories as directed by Engineer-In-Charge

Supply, paving, stringing & jumpering, testing and commissioning of 100 Sq.mm AAA Conductor conforming to REC specification and IS-398 Part-IV 1994 with latest amendments thereof, including fixing of suitable rollers, bamboos, paving out conductor on suitable supports, providing temporary stays, tensioning, sagging correctly, fixing at strain point, transporting to pin points, binding, rectification of poles, guys and jumpering of various Conductors including cost of conductor, transporting of materials and T&P from road side to location including loading and unloading and providing watch and ward till the lines are handed over to APCPDCL etc., complete for finished item of work. (Make: As per APCPDCL approved make).

Supply and laying of 33KV METAL PARTS (B&S) including all accessories as directed by Engineer-In-Charge

Supply and fixing of 33KV M.S.STAY CLAMPS including labour charges etc., complete as per APCPDCL standards.

Supply and fixing laying of MS Flat 75X8 including all accessories as directed by Engineer-In-Charge

Supply and erection of LT 3PH HG FUSE SET WITH SCI including all accessories as directed by Engineer-In-Charge

Dismantelling of all the accessories along the N4 Road and handing of dismantelled material to the section office of APCPDCL or as directed by the Engineer-In-Charge.

Supply and erection of 33KV TAPING CHANNEL X ARMS (100x50MM ) including all accessories as directed by Engineer-In-Charge

Supply and erection 33KV V CROSS ARMS WITH CLAMPs (100x50 MM channel) including all accessories as directed by Engineer-In-Charge

Supply and erection 33KV TOP CLEAT WITH CLAMPs including all accessories as directed by Engineer-In-Charge

Supply and erection M.S.BACK CLAMPS FOR 9.1 M PSCC POLE including all accessories as directed by Engineer-In-Charge

Supply and erection 33KV 70KN COMPOSITE POLYMER INSULATOR including all accessories as directed by Engineer-In-Charge

Supply and erection 33KV PIN INSULATORS (Polymer) with GI pin including all accessories as directed by Engineer-In-Charge

Dismantelling of all the accessories of 33kV along the N9 Road and handing of dismantelled material to the section office of APCPDCL or as directed by the Engineer-In-Charge.

Supply, laying and termination of 95 Sqmm 3 Core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I

Supply and installation of 11KV 3C X 95 SQMM HEAT SHRINKABLE STRAIGHT THROUGH JOINTING KIT as per IS specification.

Supply and installation of 11KV 3C X 95 SQMM HEAT SHRINKABLE END TERMINATION KIT OUTDOOR TYPE as per IS specification.

Supply and fixing of M.S.BACK CLAMPS FOR 9.1 M PSCC POLE including all accessories as directed by Engineer-In-Charge

Dismantelling of all the accessories of 11kV along the N9 Road and handing of dismantelled material to the section office of APCPDCL or as directed by the Engineer-In-Charge.

Providing POLE MOUNT ARGMT FOR 16/25KVA DTR(CHANNEL)

Supply and fixing of LT porcelain shackle insulator as per IS 1443-1979 suitable for working voltage 1100 V including all accessories like Hot dip GI spindle and nuts etc.,

Supply and fixing of 11kV Side with stutt including all accessories as directed by Engineer-In-Charge

Supply and laying of LT AB Cable XLPE 3C X 25+25 Sq. mm including all accessories as directed by Engineer-In-Charge

Supply and fixing of LT 3 PH. 5 WIRE CROSS ARMS WITH CLAMP including all accessories as directed by Engineer-In-Charge

Supply and fixing of LT 3PH SIDE ARMS WITH STUTT including all accessories as directed by Engineer-In-Charge

Supply, laying and termination of 70 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I

Supply and fixing of LT DISTRIBUTION BOX WITH MCCB-63KVA including all accessories as directed by Engineer-In-Charge

Supply and fixing of MS BOLTS & NUTS 5/8 X 8" including labour charges etc., complete as per APCPDCL standards.

Dismantelling of all the accessories along the N5 Road and handing of dismantelled material to the section office of APCPDCL or as directed by the Engineer-In-Charge.

Construction of DTR plinths- Size 4'x4'x6'(above ground) and 4'x4'x3' (below ground) with brick masonry/RR masonry wall - Excavation of pit of size 4’x4’x3’, laying bed concrete with CC(1:4:8) using 40mm and 20mm HBG metal for 6” depth, Construction of distribution transformer plinth with 9” thick 8' height brick masonry wall in CM (1:6) all- round, filling the hollow portion with sand, laying of 6” thick PCC (1:3:6) using 20 mm and 12mm HBG metal on top and plastering all-round the outer side of wall with CM (1:5) 12mm thick and white washing two coats, including cost and Transport of all materials

Erection of 100 KVA Distribution Transformer on the plinth/pole carefully without causing and damaging to bushing including labour and transport complete including connections to earthing as per department standards.

Supply, , fabrication and fixing of M.S.STAY CLAMPS FOR 9.1 M PSCC POLE including all accessories as directed by Engineer-In-Charge

Supply, laying and termination of LT XLPE CABLE SINGLE CORE 150 SQMM XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I

Supply, and fixing of LT DISTRIBUTION BOX WITH MCCB-100KVA including all accessories as directed by Engineer-In-Charge

Supply and fixing of MS BOLTS & NUTS 5/8 X 3" including labour charges etc., complete as per APCPDCL standards.

Supply and fixing of of LT 1 PH. 3 WIRE CROSS ARM WITH CLAMPMS including labour charges etc., complete as per APCPDCL standards.

Supply and fixing of of M.S.STAY CLAMPS FOR 9.1 M PSCC POLE including labour charges etc., complete as per APCPDCL standards.