SPECIAL REPAIRS TO BUILDING P-28A AT INS DRONACHARYA UNDER GE FORT KOCHI

Amount

Dismanting wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete alll as specified.

S & F anodised aluminium snap grid frame work of grid size 605 x 605 mm thick for false ceiling complete alll as specified.

M & L 4 mm thick non asbestose fibre cement bldg boards fixed or laid or insert to timber or GI or aluminium frame work with screws and applying two coats of OBD over a coat of primer complete alll as specified.

Dismantling of mangalore pattern or similar tiles in roofing.

Dismantling of timber scantilings 40 sqcm and over in section in framed work, in any position.

M&L for MS work in roof trusses (framed), trussed, purlins , crane gantries , rails and fastening and heavy bracket framing( Fe-290 Gde E-165) (Beam , tee , angle, channel or flat sections) including distance pieces, cleats etc complete alll as specified.

Cutting holes in brick walls exc one brick thick walls built in cement mortar for inserting hold fasts,fixing lugs and similar articles and making good the dismantles portion in cement mortar1:3 or in cement concrete 1:2:4 type B1 all as specified and directd.

S&F pre-painted galvalume aluminum zinc coaing GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coaing GI based plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.

S&F steel work in tubular trusses, rafters and posts etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 (grade st-240)complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.

Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth, in layers not exceeding 25cm, watering, and removing surplus spoil to a distance not exceeding 50m (soft/loose soil)and making good surface complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for

M&L Cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate for foundations, fillings and mass concrete complete all as specified and directed .

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, with riveted, bolted orwelded attachment

Material and labour for preparation of new or previously untreated steel or iron surfaces, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for heavy duty designer paver tiles, 25 mm thick, set, jointed and pointed with neat cement slurry in floors fixed with grey cement and pigment complete all as specified.

Material and labour for 75 mm thick PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate) as in sub base complete all as specified and as directed.

Material and labour for 100 mm thick PCC (1:2:4) type B2 (using 40mm graded broken stone aggregate) as in hard standing complete all as specified and as directed.

Demolition of PCC (un re-inforced) of any description and in any position not otherwie specifically provide for.

Taking down cement plaster of any description from brick or stone walls etc incl railing out joint hacking for key scrubbing down with water etc all as specified and directed.

M&L for rendering 15 mm thick in two coats (10 mm thick in cement mortar 1:4 and 5 mm thick in cement mortar 1:4) mixed with water proofing compound) on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement.(Note- water proofing compound shall be measured and paid seperately) .

Supply only liquid water proofing admixture of Fosroc chemicals/Pidilite .

M & L for rendering 10mm thick on wall in cement mortar 1:6 finished even and smooth without using extra cement complete alll as specified.

M & L for rendering 10mm thick on ceiling in cement mortar 1:3 finished even and smooth without using extra cement.

Complete removal of existing treatment by scrapping wall complete all as specified and directed.

M&L for two coats of Antifungal paint (Apex ultima Protek of Asian paint or Equivalent in approved Makes) over a coat of Exterior primer (Proffesional pack of Asian paints) over a coat of external wall care piutty n.exc 2 mm thick on new or old prepared plastered external surfaces and including scafoldings and cradles including hoisting and lowering as required with bracing , support complete all as specified.

M&L for preparation of new ceiling and applying two coats of oil bound distemper over a coat of chalk whitening.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer.

M&L for preparation of new plasterd surfaces of wall and applying two coats of oil emulsion distemper over a coat of primer over a coat of 3 mm thick wall care putty, over 10 cm width or girth complete all as specified and as described.

Demolition of brick masonary built in cement mortar.

M & L precast cement concrete block masonarywith solid blocks ,exc. 10 cm in width and setting in CM 1:6 type C1 1:3:6 (20 mm graded stone aggragate)

Taking down chowkats or frames not exc. 1.5 Sqm each with shutters (without taking off shutters from the frame).

As in item No. 33 above but exc 1.5 Sqm and n.exc 4 Sqm each.

S&F second class hard wood, plain, solid, straight chowkats and frames, wrought, frames, rebated on the solid, put together, glued at joints

S&F factory made second class HW 35 mm thick (stiles & rails as per SSR part-1)plain framed panelled shutters (two panels ) with medium density ,exterior grade marine plywood 9 mm thick supplied and fitted to chowkats .

S&F factory made II class hard wood 30 mm thick glazed and skelton shutters open seperated and prepared to receiving glass, gauge etc. Size of members of shutters as specified in SSR Part I.

Supply and fix Aluminium windows casement type (34 mm Series) powder coated aluminium sections with and including 5 mm thick plain sheet glass panes of openable type with rubber lining, Casement type (34 mm Series) sections for mosquito proofing windows with aluminium alloy wire cloth , 0.45 mm nominal dia of wire and average width of aperture 1.40 mm in three panes divided with mullion section sash bars and aluminium standard decco grills 10 mm thick, fixed in with 1.3 mm thick standard aluminium "F" channels etc complete with following sections of HINDALCO or equivalent. (a) "H" frame 44.50 x 34.00 x 2.00 mm Section No 2082 (b) "Z" shutter 34.00 x 44.50 x 2.00 mm Section No 4124 (c) Mullion 57.00 x 34.00 x 25.00 mm Section No 9139 Note:- The rates are inclussive of SS friction hinges grade 304(Eye Max) for aluminium windows , jointing cleats, rubber beading, "U" channels, handles, locking arrangements etc. complete.

S&F anodised aluminium powder coated frames for doors, windows, ventilators & partitions etc.with one or more rebates including jointing cleat for fixing etc. Complete all as specified

M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L for preparation of old treated wooden surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

S&F anodised aluminium alloy body door stopper 150 mm size

S&F anodised aluminium extruded handles 150 mm size.

S&F aluminium anodised barrel tower bolts of extruded section 200 mm size.

S&F Al Anodised extruded butt hinges 125 mm size medium weight

S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy.

S&F mild steel hold fasts for fixing chowkats complete all as specified

M&L for PCC 1:2:4 type B1 (using 20mm graded aggregate) as in bed blocks for fixing hold fasts.

M&L PCC 40 mm thick, type B-0, 1:2:4, using 12.50 mm graded stone aggreage as in levelling the undulated floor area all as specified and as directed.

Material & labour for 75 mm thick PCC ( 1:3:6) type C-2,using 40mm graded stone aggregate as in plinth protection complete with bituminous joints.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails . MS frame shall be covered with heat moulded palin colour PVC 'C" channel having a PVc sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVc sheets for top rail , lock rail & bottom rail on either side & as gap insert for top rail & bottom rail , panelling of plain colour PVC sheet to be fitted in the M s frame welded/sealed to the stiles & rails with suitable PVc sheet beading and joined together with solvent cement ,supplying & fixing in the frame at site as per specification & drawing.

S&F solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specification & drawing.

Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L PCC 40 mm thick, type B-1, 1:2:4, using 20 mm graded stone aggreage as in levelling the undulated floor area all as specified and as directed.

M&L 15 mm thick screed bedding layers in cement mortar 1:6 for laying floor finishes tiles .

M&L Joint free non skid ceramic coloured tiles 7 to 8 m thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

Rendering 10 mm thick in CM 1:4 on brick or concrete surfaces , finished fair and even .for receiving wall tiles.

M&L for glazed ceramic tiles, coloured of size 300 x 400/450 x 7 mm thick as in dado/skirting and riser to steps and jointed in neat cement slurry and pointed in white or coloured cement to match complete.

S & F in repairs vitreous china wash down water closet (Pedestal pattern) white with 'P' trap complete including plastic seat cover white closed pattern with flat bottom, and cover with plastic hinges complete all as specified.

S & F PVC low level flushing cistern 10 Ltr capacity incl float valve and flush pipe complete

S&F in repairs vitreous china wash basin, white flat back, size 550 X 400 mm excluding taps, fixed to wall by anchor bolts , waste coupling, waste pipe etc complete .

S&Fin repairs fancy type pillar taps cast copper alloy, with capstan head, chromium plated, screwed down , high pressure, with or without lettered 'Hot' or Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed. Bore of pipe in 15mm.

S&F in repairs PVC inlet connections 60 cm long, 15 mm bore with PTMT nuts.

S& fix in repairs Towel rail chromium plated, fixed in repairs complete 600mm long

S&F in repairs sinks with drainage boards made of stainless steel 1 mm thick kitchen with plugs , washers and waste; including bedding in cement mortar to dwarf wall/Granite or including fixing and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete (sink counter sunk into granite platform) .

S&F in repairs drippary curtain rods 25 mm powder coated including ornamental brackets and fixing hooks and rollers,side dooms as per sample complete fixed in repairs.

M&L for broken stone or boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

S&F in repairs steel rolling shutters, 1.25 mm thick laths, without ball bearing, as pecified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete, gear operated type with bevel gear box and crank handle type (including C channel and flat iron) all as specified and as directed.

S&F in repair helical spring for counter balancing rolling shutters made from high tension steel spring, zero gauge, 115 mm bore and 600 mm long.

S&F in repair bearing pully for rolling shutters 75 mm to 100 mm dia.

S&F in repairs mild steel screw bolts (machine made) 11 to 15 mm dia, with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexcagonal or square nut, exc 5 cm but n.exc 10 cm long complete al as specifed and as directed.

S&F in repair MS tube 50 mm dia, heavy duty suitable for shaft of rolling shutters.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for( reinforcement cut as required to facilitate demolition) all as specified and directed.

Material and labour for RCC M-25 ( Design Mix ) using 20 mm grade aggregate as in Shelves, deck slabs etc using 20 mm graded stone aggregate complete all as specified and directed.

Supply and fix mild steel TMT bars 10 mm dia and over cut to length, bent to shape reqd incl cranking, bending spherically for hooping for columns, hooking ends and binding steel wires not less than 0.9mm dia with clips complete all as specified and directed.

Material and labour for formwork to sides and soffits of roof beams, lintels , cantilevers, shelves including supports etc. flat rough finished surfaces of concrete complete all as specified and directed.

Taking down copper / aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or taking credit and making good the disturbed surfaces of walls, floors, etc.

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface all as specified and directed at site.

Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Material and labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories fixed on wall and making good to the disturbed surfaces to match the existing incl plastering , clouring etc complete all as specified and directed for one light / fan point controlled by one, one way switch 06 Amps.

All as per srl item No 81 here-in-before but one bell controlled by one bell push, 06 Amps, single pole, one way, point

All as per sr item No 81 here-in-before but one 3 pin socket outlet, 05 Amps, independent with cable 1.5 5q mm size.

All as per sr item No 81 here-in-before but one 3 pin socket outlet 05 Amps on the same board with other switches with with cable 1.5 sq mm size.

All as per Serial Item No 81 here-in-before but one 3 pin socket Per outlet, 15 Amps, independent with cable 2.5 Sq mm size

Supply and fixing switch piano, flush type, single pole, one way, 5 Amps, complete all as specified.

Supply and fixing switch socket combination outlet multipurpose 2 in 1, 5 pin, 6 Amps and 2 pin 6 Amps flush type complete all as specified.

Supply and fixing switch socket combination outlet multipurpose , 6 Amps and 16 Amps flush type complete all as specified.

Supply and fixing socket outlet multipurpose 2 in 1,5 pin, 5 Amps and 2 pin 5 Amps complete all as specified.

Supply and fixing ceiling rose PVC poly carbonate, isolated body with two to three terminals including connection

Supply and fixing lamp holder, PVC / Poly carbonate type,with cord grip cap suitable for pendent/batten/angle fittings complete all as specified.

Supply and fixing in repairs Bell push, flush type, 5 Amps complete all as specified

Supply and fixing in repairs bell Ding Dong AC. 230 volts, single pole complete all as specified.

Supply and fix stepped type fan regulator flush type complete all as specified and directed.

Disconnection of electrical wire from ceiling rose, taking down ceiling Fan of any type 1200 mm sweep and any make, dismantling the ceiling Fan for rewinding incl replacement of bearing/bushes etc without causing any damage and refixing same location after complete the necessary repair work all as per direction of engr inc harge

All as per item No 95 here-in-before but but exhaust fan 300 mm

Supply and fix in replacement of surface mounted LED integrated batten, 20/22 Watt, with IP 20 protection comprises of aluminium extruded channel, extruded aluminium body, integrated electronic driver, etc and all accessories pre-wired including connecting up complete all as directed.

All as per item No 97 here-in-before but but 10/9 watts 2 feets LED light fittings

M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size 4 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc two runs of PVC insulated with 4 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- two runs of 4 sqmm cable, one run of 4sqmm cable and one run of PVC conduit will be measured as one unit

S&F in repair sheet metal enclosure DB SPN AC 240 Volts 8 way with 200 Amps rated bus bar and double door complete all as specified

Supply and fix in repair of MCB, SP, AC, 240 volts of 06 to 32 Amps capacity complete all as specified & directed..

Supply and fix in repair of MCB, DP, AC, 240 volts of 32 Amps capacity complete all as specified & directed.

Supply and fixing LED Bldg light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

S & F for Ventilation fan of 200 mm sweep made of PVC body complete with louver and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to ventilation fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted).

Material & labour for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, buried directly in Set ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel Gl protection pipe 15mm bore light grade all as shown in electrical plate No 3 on serial page No 497 of SSR part 2009 and connected to main switch board / Main DB's including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, Gl pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 75mm center to center both way with 12mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40mmx40mmx3mm frame for pit cover including testing on completion complete all as specified and directed.

Taking out old unsv GI pipe 15 mm bore with all connecting accessories complte from wall/ floor as as specified

Taking out old unsv GI pipe 25 mm bore with all connecting accessories complte from wall/ floor as as specified

S&F CPVC pipes, SDR 11, 15 mm outer dia of pressure rating 6kgf/sqcm conforming to IS-15778 with all CPVC fittings with such as brass elbow ,Tee, bends, unions ,sockets ,Threaded Adoptor and end pieces etc to receive fittings and fixed with solvents fixed to walls / ceiling with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure etc complete all as specified and as directed.

S&F CPVC pipes, SDR 11, 25 mm outer dia of pressure rating 6kgf/sqcm conforming to IS-15778 with all CPVC fittings with such as brass elbow ,Tee, bends, unions ,sockets ,Threaded Adoptor and end pieces etc to receive fittings and fixed with solvents fixed to walls / ceiling with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure etc complete all as specified and as directed.

S&Fin repair 25 mm gun metal globe/gate valves, with CPVC body, screwed /pasted both ends for CPVC pipe, complete all as specified

S/F in repair of Ball/float valve of size 25 mm dia high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed ( Make:- PRAYAG / SYMET).

Supply and fix in repair of 15 mm bore bib tap long body half turn, cast copper alloy chromium plated with crutch or butterfly handle, complete all as specified and directed.

Supply and fix in repair of 20mm Stop cock, cast copper alloy chromium plated fancy type with long shank and cup crutch or butterfly handle suitable for CPVC pipes complete all as specified

Supply and fix in repair of 25 mm Stop valves, cast copper alloy chromium plated fancy type with long shank and cup crutch or butterfly handle suitable for CPVC pipes complete all as specified

Supply and fixing in repair of shower rose 125 mm size with 300 mm long arm chromium plated with swivel joints suitable for CPVC pipe 20mm or union all as specified complte

Supply only Health faucet suitable for ABS Body chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete suitable for working pressures of high rise buildings all as specified and directed.

Supply only half/quarter turn 15 mm dia Angle cock, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down high pressure with crutch or butterfly handle, screwed both ends iron pipe suitable for CPVC pipes including taking down old cock,complete all as specified

S&F 500 ltr capacity rotational moulded polythene water storage tank cylindrical vertical with closed top, hoisted three layer and fixed including taking out old tank, all as specified.

K.V.GEORGE AND COMPANY

ZOOM ENTERPRISES

K R JOSEPH AND SONS

T.I.John and Sons