Kerala

Active

Works

Civil Works - Water Works

State Plan 2025-26 Optimization of Production and Transmission Rennovation of WTP CRWSS to Sreemoolanagaram and Kanjoor Panchayaths Supply and Fixing Electro magnetic Flow Meter 3 nos 150mm 200mm 300mm at 13.5 MLD WTP Chowara

Kerala Water Authority

Sreemoolanagaram Panchayath | Ernakulam, Kerala

Amount: ₹14.9 LCloses: 16 Oct 20265d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published7 Oct 2026
Closes16 Oct 2026
Bid Opening17 Oct 2026

Tender Value

₹14.9 L

EMD Value

₹37,158

Closing Date

16 Oct 2026, 3:00 pm5d left

Tender Inviting Organisation

Name

Executive Engineer KWA PH Division Aluva

Address

Executive Engineer KWA PH Division Aluva

Work Description

State Plan 2025-26 Optimization of Production and Transmission Rennovation of WTP CRWSS to Sreemoolanagaram and Kanjoor Panchayaths Supply and Fixing Electro magnetic Flow Meter 3 nos 150mm 200mm 300mm at 13.5 MLD WTP Chowara

Tender Information

Tender ID

2026_KWA_877139_1

Reference Number

CE(CR)/TR/7831/2025_16_1_1/RC 1/1

Tender Type

Open Tender

Product Category

Civil Works - Water Works

Form of Contract

Item Rate

Period of Work

60 days

Location

Sreemoolanagaram Panchayath

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

RequiredKWA Licence (.pdf)

RequiredGST Registration certificate and Copy of PAN CARD (.pdf)

RequiredScanned copy of Preliminary agreement filled (.pdf)

RequiredDigitally signed Form 83 84 (.pdf)

RequiredNon relation certificate (.pdf)

RequiredUndertaking regarding LD Clause (.pdf)

RequiredBOQ (To be submitted online only) (.xls)

Fee & Financial Details

Tender Fee Amount

₹2,760

EMD Fee Amount

₹37,158

Important Dates

Last Activity

7 Oct 2026

Published

7 Oct 2026

Bid Opening

17 Oct 2026

Download Starts

7 Oct 2026

Download Ends

16 Oct 2026

Submission Starts

7 Oct 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (20 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Working Charge
1.001	OD77472/2026-2027:Supply and Installation an electro-magnetic flow meter 100mm conforming to protection level of IP-68 for Flow Sensor and IP-67 for transmitter and having an accuracy level of 0.5% with LED/LCD Display unit. The flow meter should have the housing (flow sensor) to be made of SS 304 Carbon Steel with anti-corrosive protection and inside liner to be made up of Hard Rubber/neoprene all conforming to drinking water standards. The flow meter should be coupled with HART for data acquisition and transfer, with provision for wireless transfer through GSM. The manufacturers should have the calibration standards as per ISO 17025 and the product shall have sufficient warranty provisions. Removing existing all fixers and fitted with new flow meter with fixtures and allied all consumables such as suitable ss nut and bolt, packing, boring etc as per the direction of departmental officers .	2	Job	-	-
1.002	OD77473/2026-2027:Supply and Installation an electro-magnetic flow meter 150mm conforming to protection level of IP-68 for Flow Sensor and IP-67 for transmitter and having an accuracy level of 0.5% with LED/LCD Display unit. The flow meter should have the housing (flow sensor) to be made of SS 304 Carbon Steel with anti-corrosive protection and inside liner to be made up of Hard Rubber/neoprene all conforming to drinking water standards. The flow meter should be coupled with HART for data acquisition and transfer, with provision for wireless transfer through GSM. The manufacturers should have the calibration standards as per ISO 17025 and the product shall have sufficient warranty provisions. Removing existing all fixers and fitted with new flow meter with fixtures and allied all consumables such as suitable ss nut and bolt, packing, boring etc as per the direction of departmental officers .	1	job	-	-
1.003	OD77475/2026-2027:Supply and Installation an electro-magnetic flow meter 200mm conforming to protection level of IP-68 for Flow Sensor and IP-67 for transmitter and having an accuracy level of 0.5% with LED/LCD Display unit. The flow meter should have the housing (flow sensor) to be made of SS 304 Carbon Steel with anti-corrosive protection and inside liner to be made up of Hard Rubber/neoprene all conforming to drinking water standards. The flow meter should be coupled with HART for data acquisition and transfer, with provision for wireless transfer through GSM. The manufacturers should have the calibration standards as per ISO 17025 and the product shall have sufficient warranty provisions.	1	job	-	-
1.004	OD77474/2026-2027: Supply and Installation an electro-magnetic flow meter 300mm conforming to protection level of IP-68 for Flow Sensor and IP-67 for transmitter and having an accuracy level of 0.5% with LED/LCD Display unit. The flow meter should have the housing (flow sensor) to be made of SS 304 Carbon Steel with anti-corrosive protection and inside liner to be made up of Hard Rubber/neoprene all conforming to drinking water standards. The flow meter should be coupled with HART for data acquisition and transfer, with provision for wireless transfer through GSM. The manufacturers should have the calibration standards as per ISO 17025 and the product shall have sufficient warranty provisions. Removing existing all fixers and fitted with new flow meter with fixtures and allied all consumables such as suitable ss nut and bolt, packing, boring etc as per the direction of departmental officers	1	job	-	-
1.005	100.37.7.1:In situ fabrication of M.S. pipes of size 200mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.	4	metre	-	-
1.006	100.37.7.3:Cutting 200mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.	6	no	-	-
1.007	100.37.7.4:Welding 200mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.	6	no	-	-
1.008	100.37.2:Grinding the cut edges / welded portions in M.S. sheet, pipe and specials by grinding machine including all labour and hire charges of tools etc., complete.	407.15	cm	-	-
1.009	100.37.7.2:Fabricating M.S. flanges of diameter 200mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.	4	no	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

KWAGeneralConditionsforeTenderingV5.pdf

PDF • 0.69 MB

Tendernotice_1.pdf

PDF • 0.04 MB

Work Item Documents

NIT7831.pdf

Tender Documents • 1.98 MB

BOQ_1490355.xls

BOQ • 0.32 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Working Charge
1.001	OD77472/2026-2027:Supply and Installation an electro-magnetic flow meter 100mm conforming to protection level of IP-68 for Flow Sensor and IP-67 for transmitter and having an accuracy level of 0.5% with LED/LCD Display unit. The flow meter should have the housing (flow sensor) to be made of SS 304 Carbon Steel with anti-corrosive protection and inside liner to be made up of Hard Rubber/neoprene all conforming to drinking water standards. The flow meter should be coupled with HART for data acquisition and transfer, with provision for wireless transfer through GSM. The manufacturers should have the calibration standards as per ISO 17025 and the product shall have sufficient warranty provisions. Removing existing all fixers and fitted with new flow meter with fixtures and allied all consumables such as suitable ss nut and bolt, packing, boring etc as per the direction of departmental officers .	2	Job	-	-
1.002	OD77473/2026-2027:Supply and Installation an electro-magnetic flow meter 150mm conforming to protection level of IP-68 for Flow Sensor and IP-67 for transmitter and having an accuracy level of 0.5% with LED/LCD Display unit. The flow meter should have the housing (flow sensor) to be made of SS 304 Carbon Steel with anti-corrosive protection and inside liner to be made up of Hard Rubber/neoprene all conforming to drinking water standards. The flow meter should be coupled with HART for data acquisition and transfer, with provision for wireless transfer through GSM. The manufacturers should have the calibration standards as per ISO 17025 and the product shall have sufficient warranty provisions. Removing existing all fixers and fitted with new flow meter with fixtures and allied all consumables such as suitable ss nut and bolt, packing, boring etc as per the direction of departmental officers .	1	job	-	-
1.003	OD77475/2026-2027:Supply and Installation an electro-magnetic flow meter 200mm conforming to protection level of IP-68 for Flow Sensor and IP-67 for transmitter and having an accuracy level of 0.5% with LED/LCD Display unit. The flow meter should have the housing (flow sensor) to be made of SS 304 Carbon Steel with anti-corrosive protection and inside liner to be made up of Hard Rubber/neoprene all conforming to drinking water standards. The flow meter should be coupled with HART for data acquisition and transfer, with provision for wireless transfer through GSM. The manufacturers should have the calibration standards as per ISO 17025 and the product shall have sufficient warranty provisions.	1	job	-	-
1.004	OD77474/2026-2027: Supply and Installation an electro-magnetic flow meter 300mm conforming to protection level of IP-68 for Flow Sensor and IP-67 for transmitter and having an accuracy level of 0.5% with LED/LCD Display unit. The flow meter should have the housing (flow sensor) to be made of SS 304 Carbon Steel with anti-corrosive protection and inside liner to be made up of Hard Rubber/neoprene all conforming to drinking water standards. The flow meter should be coupled with HART for data acquisition and transfer, with provision for wireless transfer through GSM. The manufacturers should have the calibration standards as per ISO 17025 and the product shall have sufficient warranty provisions. Removing existing all fixers and fitted with new flow meter with fixtures and allied all consumables such as suitable ss nut and bolt, packing, boring etc as per the direction of departmental officers	1	job	-	-
1.005	100.37.7.1:In situ fabrication of M.S. pipes of size 200mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.	4	metre	-	-
1.006	100.37.7.3:Cutting 200mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.	6	no	-	-
1.007	100.37.7.4:Welding 200mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.	6	no	-	-
1.008	100.37.2:Grinding the cut edges / welded portions in M.S. sheet, pipe and specials by grinding machine including all labour and hire charges of tools etc., complete.	407.15	cm	-	-
1.009	100.37.7.2:Fabricating M.S. flanges of diameter 200mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.	4	no	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Working Charge

1.001

OD77472/2026-2027:Supply and Installation an electro-magnetic flow meter 100mm conforming to protection level of IP-68 for Flow Sensor and IP-67 for transmitter and having an accuracy level of 0.5% with LED/LCD Display unit. The flow meter should have the housing (flow sensor) to be made of SS 304 Carbon Steel with anti-corrosive protection and inside liner to be made up of Hard Rubber/neoprene all conforming to drinking water standards. The flow meter should be coupled with HART for data acquisition and transfer, with provision for wireless transfer through GSM. The manufacturers should have the calibration standards as per ISO 17025 and the product shall have sufficient warranty provisions. Removing existing all fixers and fitted with new flow meter with fixtures and allied all consumables such as suitable ss nut and bolt, packing, boring etc as per the direction of departmental officers .

Job

1.002

OD77473/2026-2027:Supply and Installation an electro-magnetic flow meter 150mm conforming to protection level of IP-68 for Flow Sensor and IP-67 for transmitter and having an accuracy level of 0.5% with LED/LCD Display unit. The flow meter should have the housing (flow sensor) to be made of SS 304 Carbon Steel with anti-corrosive protection and inside liner to be made up of Hard Rubber/neoprene all conforming to drinking water standards. The flow meter should be coupled with HART for data acquisition and transfer, with provision for wireless transfer through GSM. The manufacturers should have the calibration standards as per ISO 17025 and the product shall have sufficient warranty provisions. Removing existing all fixers and fitted with new flow meter with fixtures and allied all consumables such as suitable ss nut and bolt, packing, boring etc as per the direction of departmental officers .

job

1.003

OD77475/2026-2027:Supply and Installation an electro-magnetic flow meter 200mm conforming to protection level of IP-68 for Flow Sensor and IP-67 for transmitter and having an accuracy level of 0.5% with LED/LCD Display unit. The flow meter should have the housing (flow sensor) to be made of SS 304 Carbon Steel with anti-corrosive protection and inside liner to be made up of Hard Rubber/neoprene all conforming to drinking water standards. The flow meter should be coupled with HART for data acquisition and transfer, with provision for wireless transfer through GSM. The manufacturers should have the calibration standards as per ISO 17025 and the product shall have sufficient warranty provisions.

job

1.004

OD77474/2026-2027: Supply and Installation an electro-magnetic flow meter 300mm conforming to protection level of IP-68 for Flow Sensor and IP-67 for transmitter and having an accuracy level of 0.5% with LED/LCD Display unit. The flow meter should have the housing (flow sensor) to be made of SS 304 Carbon Steel with anti-corrosive protection and inside liner to be made up of Hard Rubber/neoprene all conforming to drinking water standards. The flow meter should be coupled with HART for data acquisition and transfer, with provision for wireless transfer through GSM. The manufacturers should have the calibration standards as per ISO 17025 and the product shall have sufficient warranty provisions. Removing existing all fixers and fitted with new flow meter with fixtures and allied all consumables such as suitable ss nut and bolt, packing, boring etc as per the direction of departmental officers

job

1.005

100.37.7.1:In situ fabrication of M.S. pipes of size 200mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.

metre

1.006

100.37.7.3:Cutting 200mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

1.007

100.37.7.4:Welding 200mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

1.008

100.37.2:Grinding the cut edges / welded portions in M.S. sheet, pipe and specials by grinding machine including all labour and hire charges of tools etc., complete.

407.15

1.009

100.37.7.2:Fabricating M.S. flanges of diameter 200mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.