Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.3 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹13.2 L+₹3.0 L (29.1%)Rejected-Finance | L2 | Rejected-Finance Second Lowest | |
| 3 | L3₹13.5 L+₹3.2 L (31.2%)Rejected-Finance | L3 | Rejected-Finance Third Lowest | |
| 4 | L4₹13.5 L+₹3.3 L (32.0%)Rejected-Finance | L4 | Rejected-Finance Fourth Lowest | |
| 5 | L5₹13.7 L+₹3.4 L (33.1%)Rejected-Finance | L5 | Rejected-Finance Fifth Lowest |
Tender Value
Refer Docs
EMD Value
₹30,000
Closing Date
29 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major Sameer Wadekar
Holta Cantt, Palampur
WELCOME MAINT AND CERTAIN REPAIRS TO OFFRS MD ACCN AT PALAMPUR MIL STN
2022_MES_536643_1
GEP-09/2022-23
Open Tender
Civil Works
Item Rate
330 days
Palampur Mil Stn
As per tender documents
8 documents required · 8 mandatory
₹500
Yes
GE Palampur
₹30,000
Yes
6 Sept 2022
8 Jul 2022
1 Aug 2022
8 Jul 2022
29 Jul 2022
22 Jul 2022
Amount
M&L for preparation of old plastered/ unplastered wall surface including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white washing, complete all as specified and directed.
M&L for preparation of old plastered/ unplastered ceiling surface including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white washing, complete all as specified and directed.
M&L for preparation of old plastered/ unplastered wall surface including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of distemper oil emulsion, complete all as specified and directed. Note : - 25 % of material shall be deposited in MES store at every qtrs before commencement of works and shall be issued to contractor as per requirement.
M&L for complete removal of existing treatment by mechanical means and preparation new wall surface and applying two coats of distemper oil emulsion, complete all as specified. Note:- 25 % of material shall be deposited in MES store at every qtrs before commencement of works and shall be issued to contractor as per requirement.
M&L for applying a coat of 2mm thick layer wall putty over wall primer, complete all as specified and directed.
M&L for preparation of old plastered/unplastered wall surface including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of cement base paint upto 15m height, complete all as specified and directed. Note:- 25 % of material shall be deposited in MES store at every qtrs before commencement of works and shall be issued to contractor as per requirement.
M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cms width or girth including preparation of surface and applying one coat of synthetic enamel paint, complete all as specified and directed. Note: - 25 % of material shall be deposited in MES store at every qtrs before commencement of works and shall be issued to contractor as per requirement.
M&L for preparation of old painted wood or wood based surfaces of any description not otherwise described and surface not exc 10 cms width or girth including preparation of surface and applying one coat of synthetic enamel paint on wooden surface, complete all as specified and directed. Note:- 25 % of material shall be deposited in MES store at every qtrs before commencement of works and shall be issued to contractor as per requirement.
M&L for preparation of old painted steel surfaces of doors/windows/railings/CGI sheet over roof or any description not otherwise described over 10 cms width or girth including preparation of surface and applying one coat of synthetic enamel paint, complete all as specified and directed. Note:- 25 % of material shall be deposited in MES store at every qtrs before commencement of works and shall be issued to contractor as per requirement.
M&L for preparation old wall surface by removing existing treatment by scrapping, brushing etc including making surface clean, dry and free from any loose paint film, dirt, chalk, grease, fungus and algae and filling holes, dents, cracks with mixture of white cement and mortar for applying one coats of acrylic, antifungal emulsion exterior weather proof paint on existing external surfaces, complete all as specified and directed. Note:- 25 % of material shall be deposited in MES store at every qtrs before commencement of works and shall be issued to contractor as per requirement.
M&L for preparation of wood surface for Varnishing including cleaning and stoping and applyng one coat of liquid transparent wood filler and finishing with a varnish coat complete all as specified and directed.
Demolition of brick work or stone /boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc complete all as specified and directed.
Dismantling timber scantlings 40 sqcm and over in section in any position framed or unframed work etc, complete all as specified and directed.
Dismantling timber scantlings as in fillets, rails, posts rafters, purlins etc in framed/unframed work, not exceeding 40 sqcm in section in any position, complete all as specified and directed.
M&L for Brick work with sub class 'B' bricks straight or curved on plan, exceeding 6 m mean radius with old size bricks, built in cement mortar 1:6 complete all as specified and directed.
M&L for Brick work with sub class 'B' bricks, straight or curved on plan, to any radius, in half brick thick wall, using old size brick, built in cement mortar 1:4, complete all as specified and directed.
M&L for plain fillets, square rectangular or triangular in section, wrought, bull nosed, splayed, chamfered or rounded on one edge or face, secured with nails or brad, 2nd class soft wood (kail) sec area exc 6 sqcm but not exc 13 sqcm as in cover fillets, complete all as specified and directed.
S&F 2nd class hard wood (Sal / Hollock) plain, solid, straight chowkats & frames, wrought, framed, rebated on solid, rounded or chamfered, put together with glue, pinned at joints, with one or more rebates, complete all as specified and directed.
S&F 1st class hard wood (Sal / Hollock) factory made glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass or gauge,etc.edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (a) for door shutter supplying and fitted to chowkats, complete all as specified and directed.
S&F 30mm thick flush shutters,solid core construction,with partical board core and covered with decorative face veneer with lipping/frame to match on both sides complete all as specified.
Taking down chowkats or frames including shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each, and removing from site, complete all as specified and directed.
Taking down chowkats or frames including shutters (without taking off shutters from the frames) exceeding 1.50 Sqm and not exceeding 4 Sqm each, and removing from site, complete all as specified and directed.
Taking down shutters of any description not exceeding 1.00 Sqm and removing from site, complete all as specified and directed.
Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each, and removing from site, complete all as specified and directed.
Refixing shutters including taking down, easing and ajusting and also refixing builders hardware as required including renewal of unserviceable screws, etc of any description n.exc 1.00 Sqm each in same opening complete all as specified and as directed.
Refixing shutters including taking down, easing and ajusting and also refixing builders hardware as required including renewal of unserviceable screws, etcof any description exc 1.00 Sqm and n.exc 2.00 Sqm each in same opening, complete all as specified and directed.
S&F factory made solid PVC moulded door shutters 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supply & fixing in opening as per specification & drawing shown in SSR Part-II, complete all as specified and directed.
S&F for aluminium, anodised, barrel tower bolts of extruded section, 125mm long, complete all as specified and directed.
S&F for aluminium, anodised, barrel tower bolts of extruded section, 150mm long, complete all as specified and directed.
S&F for 250mm size aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed.
S&F mild steel cold rolled butt hinges, medium weight,100mm long, complete all as specified and directed.
S&F in repair 18/19mm thick prelaminated particle board, exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to , complete all as specified.
S&F mild steel continuous piano hinges, bright finish or electro galvanised, width of flap when open 30mm, complete all as specified and directed.
S&F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F aluminium handles, cast type, anodised of size 150 mm long, complete all as specified and directed.
S&F 40mm dia cupboard knobs fixed with nut, screw and washer of mild steel bright finished, fixed in repair, complete all as specified and directed.
S&F hasp and staple (Safety type) aluminium anodised including bolt to hinge plate and fixed with screws, 100mm size, complete all as specified and directed.
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.
S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.
S&F aluminium sliding / fixed windows powder coated including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified and directed.
M&L for welding in repairs n.exc. 2.5 cm in length and n.exc. 6mm thick, complete all as specified and directed.
S&F for 4mm thick non-asbestos fibre cement board, ISI marked, fixed to timber frame works as in ceiling, flat or sloppy, as per manufacture's instructions, complete all as specified and directed.
S&F for 19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed.
M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.
M&L for glazed coloured ceramic tiles in vertical surfaces 350mm x 250mm x 7mm /450mm x 350mm x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM 1:4 to receive tiles, complete all as specified and directed.
M&L for vitrified light shade ceramic tiles 10mm thick (square or rectangular) area of each tile exc 0.36 Sqm but n.exc 0.42 Sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, with and including 15mm thick screed bed in CM 1:6, complete all as specified and directed.
M&L for vitrified light shade ceramic tiles 10mm thick (square or rectangular) area of each tile n.exc 0.36 Sqm as in vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry, pointed in white or coloured cement to match the shade of tiles, with and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement, complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of concrete surfaces as in facia or ceiling in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified.
M&L for rendering 10mm thick on fair faces of concrete surfaces as in facia or ceiling in cement mortar 1:3 finished even and smooth without using extra cement, complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
M&L for preparation of ceiling surfaces and applying one coat of white wash, complete all as specified and directed.
M&L for distempering with 1st quality acrylic distemper (ready mixed ) having VOC content less than 50gm/litre of approved manufacturer of required shade and colour complete as per manufacturers specification two or more coats on new work including preparation of surfaces with 2mm thick JK/Birla wall putty complete all as specified and directed.
M&L for appplying two or more coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 :2004, Alkali & fungal resistance dirt resistance exterior paint of required shade ( Company Depot Tinted ) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfacess complete including preparation of surfaces of walls by complete removal of existing treatment all as specified and directed.
S&F 4mm thick sheet glass ordinary quality, and glazing with oil putty or wooden beads in squares exc 0.50 Sqm in each pane, complete all as specified and directed.
S&F 3mm thick figured glass pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed.
Hacking out old broken glasses (any thickness, size, quality or description) from wooden frames or steel frames, glazed with putty or fixed with wooden beads, complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.
M&L for preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer, complete all as specified and directed.
S&F steel water tubing, 15mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work etc, complete all as specified and directed.
All as per the description of serial item No 62 above but except GI water tubing.
S&F steel water tubing, 20mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work etc , complete all as specified and directed.
All as per the description of serial item No 64 above but except GI water tubing.
Taking up or down 15mm bore steel tubing and connection, including cleaning for refixing or removal from site ,complete all as specifed complete all as specified and directed.
Taking up or down 20mm bore steel tubing and connection, including cleaning for refixing or removal from site complete all as specified and directed.
S&F in repairs fancy type, chromium plated, bib tap, cast copper alloy with quater turn flange, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed.
S&F in repairs centre hole mixer, long neck cast copper alloy, with capstan head, brass chromium plated screwed down high pressure, with or without lettered hot/cold with long screwed shanks and fly nuts screwed for iron pipe 15mm bore, complete all as specified and directed.
S&F in repairs brass chromium plated mixture for mixing hot and cold water, screwed down for iron pipe for 15mm dia bore pipe, complete all as specified and directed.
S&F in repairs 15mm bore stop valves/angle cock (two way if required), cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union, complete all as specified and directed.
S&F in repairs 15mm bore stop valves, cast copper alloy, screwed down, high pressure, with long shank and cup (concealed type) screwed both ends for iron pipe or union, complete all as specified and directed.
S&F in repairs 20mm bore stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union, complete all as specified and directed.
S&F in repairs PVC connection suitable for 15mm pipe with PTMT nuts and washers for both ends of length 450mm long, complete all as specified and directed.
S&F in repairs brass chromium plated shower rose 125mm size, with or without swivel joints, including shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour, fixing to steel pipe or union complete all as specified and directed.
S&F in repairs vitreous china squatting pan water closet, orissa pattern, size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including cast iron 'P' or 'S' trap, provn of lime concrete and jointing to flush pipe, complete all as specified and directed.
S&F in repairs vitreous china coloured wash down water closet pan (Padestal Pattern), including connection to flush pipe, 'P' or 'S' trap, with fixing bolts PVC seat cover with chromium plated mild steel hinges device (excluding flushing cistern and flush pipe), complete all as specified and directed.
S&F in repairs 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe and 15mm dia 450mm long PVC connection with CP brass coupling nuts and PVC washer at both ends, complete all as specified and directed.
S&F in repairs viterous china, wash hand basin, (white) of size 550 mm x 400 mm including brass CP waste coupling 32 mm dia with long screwed shank and fly nuts, PVC, medium grade 32 mm dia waste pipe, chain and plug, porcelain stopper , PVC connection 15 mm dia, 450 mm long with brass CP nuts and washers at both ends complete all as specified and directed.
S&F in repairs wooden boarding of 2nd class softwood clean sawn boards or planks, having thickness 20mm, fixed with screws to replace old and or decayed boarding in patches including cutting out old, piecing, heading joints, etc complete all as specified and directed.
S&F in repairs PVC coated mild steel conduit pipe 25mm bore (Drapery rod) with a pair of PVC coated MS clamps to hold drapary rod and decorative attachment at one or both ends of drapary rod, fixed to opening of door/windows, (fixed in repair) (Each opening n.exc 1.50 mtr, contained with a pair of clamps and a pair of side ornamental attachments) complete all as specified and directed.
S&F in repairs Jet for pedestal pan, chromium platedwith flexible pipe of 90cm in length complete all as specified and as directed.
S&F in repairs for health faucet for WC of any description, brass chromium plated with flexible pipe of 90cm in length, complete all as specified and as directed.
S&F GI frame work for ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 & 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section(not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed.
S&F 9mm thick laminated with PVC film on front side and polyster matalised film on back side with dew drop texture of size 610mm x 610mm as in ceiling complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.
M/S JATINDERA ENTERPRISES
dinesh enterprises
M/S PARVEEN ENTERPRISES
M/S THAKUR ENTERPRISES
Shri Karshni Builders
M/S Bharmouri Construction
BHARDWAJ BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .