WBPWD/EE/BNWD/NIT26e/2025-26

Restoration work of Vivekananda Yuba Bharati Krirangan Football Stadium against damages occurred on 13th December 2025 during the year 2025-26.

Item Rate BoQ

BoQ_Ver3.0

anshu66

Bidder Name :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Supplying fitting and fixing VGS-WHT- 0559 decorated Counter top oval basin(Jaguar make oval basin of size size 150mm x 865 mm x 520 mm). The rate includfing the cost of all materials, labour charges for scaffolding etc. complete in all respect as per direction of the Engineer-in-charge.

Supplying, fitting and fixing of bucket seat of smooth matt finishe are moulded from virgin UV resistant polypropylene (co-polymer 5mm th.) with fire resistant additives and truly versatile design etc. Excluding supporting structure as per direction of Engg-in-charge.

Renewing of MS supporting structure for bracket seat replacement of dammege portion including welding, cutting, fitting, fixing & mending good damages etc. as per direction of Engg-in-charge.

Percentage BoQ

BoQ_Ver3.0

Bidder Name :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Supplying,fitting & fixing granite slab 15mm to 18mm thick in floor, lobby, stair, landing and treads etc. over 20mm (avg) thick base of cement morter (1:2) laid with white cement slurry@ 4.40Kg per Square meter before placing of granite and jointed with white cement slurry @ 2.0 Kg per square meter with necessary pigments and complete as per direction of Engineer-in-charge including cost of all materials, labours, curing and roughening of concrete surface complete. In ground floor (c) Area of each Granite slab above 1.00 Square meter. 1st. floor

Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite doorframe as per approved section with glass fibre reinforced plastic moulded skinsand a special sandwich core, so as to impart monolitaheic composite structure asper approved technology of Department of Science and Technology (DST) tosafisfy IS: 4020 door testing performance criteria..

Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skinsand a special sandwich core, so as to impart monolitaheic composite structure asper approved technology of Department of Science and Technology (DST) tosatisfy IS:4020 door testing performance criteria.In ground floor. (i) 32 mm thick. 1st. floor

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (vii) 100 mm x 58 mm x 1.90 mm.

Anodise aluminium barred /tower/ socket bolt (full covered) of approved manufactured from extruded section conforming to I.S.204/74 fitted and Fixed with cadmium plated screws:. (iv) 150 mm long x 10 mm dia. bolt.

Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S.230/72) fitted and fixed complete:. (a) With continuous plate base (hexagonal/round rod). (iv) 125 mm grip x 10 mm dia rod.

Dismantling all type of plain cement concrete works, stacking serviceable materrials at site and removing rubbish as directed with in a lead of 75 m In ground floor including roof. (a) upto 150 mm. thick. 1st. floor

2nd floor

3rd floor

Artificial stone in floor, dado, staircase etc. with cement conctrete (1:2:4) with stone chips laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works, using cement @ 1.75 kg./sq.m. all complete including all materials and labour In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted) with ordinary cement. Using grey cement. (iii) 35 mm.thick 1st. floor

2nd floor

3rd floor

Supplying and application of chemical for post Installed rebar connection by using ETA approved for seismic criteria In rebar connection, Including drilling hole to the required depth by rotary hammer drill, cleanlng with brush & jet of clean air, fillng chemical usIng serrated noule to eliminate mIxIng error and in a voldless manner IncludIng charges for all tools & plants. Application to be designed for post• Installed rebars as per ECZ/TR023 or relevant tested and accepted design guidelines and the design document to be furnished by the manufacturer. The chemical should have ETA apprOVal for seIsmIc criteria of rebar fixing whIch should be furnished by manufacturer. The installation and the setting instructions should be strIctly followed as per manufacturer's specificatlons as approved by EICprior to drlll/ng along with post· Installed rebar embedment design report. The existing concrete member should be scanned using rebar scanner to avoid hitting existing reinforcement in concrete. Cost of post installed rebaring application with chemical as speclfled for 10 mm dia per cm of depth

Supplying, fitting & fixing polycarbonate sheet of approved make & brand conforming to IS: 14443-1997 and having 50micron UV protection layer under co-extrusion technology,Fire rating being B-s1 as per EN13501-1 certification, fittedand fixed with 60mm wide aluminium channel section topand bottom member in dry-glaze sandwitch system, (unit wt.of top and bottom members: 0.375 kg/m & 0.69 kg/m) ofapproved brand and profile, EPDM quality rubber gaskets,anti dust tape, end closer "C" channel and 75 mm long Selftapping screw being drilled through the centre leg of thebottom section with nuts placed at 300 mm apart withoutanyway puncturing the polycarbonate sheet, EPDM Washer16 mm dia & 3 mm thick washer etc complete strictly as permanufacturers specification and direction of Engineer-in-Charge. (Payment to be made on area of finished work) .In Roof:-Natural/ Blue/Green/Bronze/Opal/Metallic grey colour e)With 4 wall 10 mm overall thickness (wt.1.75kg /sqm,Ug value being 2.5 W/m2K, Min. cold bending radius of 1500 mm)

Supplying, fitting and fixing glass reinforced polyester translucent fiber sheet 300mm wide in half round gutter in roof as per IS: 12866 - 1989 fitted and fixed with 50 X 6mm MS Clamp with necessary bolts and nuts, screws and jointing material complete as per direction of Engineer - in - Charge. i) Natural white or tinted blue colour

M.S. works in brackets made from flats, angles, tees etc. to sizes specialy bent, twisted, forged; making holes drilled and fitted to rafter of trusses with necessary bolts, nuts, washer or screws etc. (length of straight not less than 230 mm)

Supplying fitting and fixing I.R.C. fabric mesh with covering battens including cost of screws etc complete (excluding the cost of battens). e) 75mm x 50mm x 2.7mm x 2.7mm.

Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I marking with fittings(tested to 21 kg per sq.cm.). 25 mm.

Supplying, fitting and fixing bib cock or stop cock. Chromium plated Bib Cock short body (Equivelent to Code No.511 & Model- Tropical /sumthing special of ESSCO or Similar brand).

Chromium plated plated angular Stop Cock with wall flange (Equivelent to Code No.5053 & Model- Florentine of Jaquar or Similar brand).

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. Specification with P.V.C. fittings complete, C.I. brackets including two coats of painting to bracket etc.

Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75mm X 75 mm X 75 mm wooden blocks complete. (ii) 470 mm X 280 mm X 340 mm

Supplying, fitting and fixing Closet seat of approved make with lid and C.P.hinges, rubber buffer and brass screws complete. (a) E.W.C. (ii) Plastic (hallow type) white

Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silve ring as perI.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm

Supplying, fitting and fixing pillar cock of approved make. c) CP Pillar Cock- 15 mm. (Code No. 5011 & Model- FLORENTINE of JAQUAR or equivalent).