Loading…
Loading…
Tender Value
₹2.0 Cr
EMD Value
₹2.5 L
Closing Date
7 Jan 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
PLANNING
15 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Tenderer shall have a valid Electrical Contractor's License issued in the name of the firm by any State Government and shall furnish/attach all the particulars of the Electrical license along with their offer.
Technical Eligibility Criteria: (a)The Tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(i) In case of tender for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works costing not less than the amount equal to 30% of advertised value of each component of tender, or (iii)Two similar works costing not less than the amount equal to 40% of advertised value of each component of tender, or (iv)One similar work costing not less than the amount equal to 60% of advertised value of each component of tender. Note :- Work experience certificate from private individual shall not be considered. However, in addition to work experience certificate issued by any Govt. Organization, work experience certificate issue by Public listed company having average annual turnover of Rs. 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated /registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Definition of similar nature of work:- For this tender the following work only will be considered similar work for judging the technical eligibility criteria. "Supply, Installation, Testing and Commissioning of High Mast Towers of different heights with light fittings and associated works with or without AMC."
22 conditions · 3 needing a document upload
If firm ( Partnership Firm, Registered Society & Registered Trust) is required to submit Power of attorney it should be submitted as per given proforma enclosed in tender document.
if firm (Company registered under Companies Act 2013) is required to submit a copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company it should be submitted as per given proforma enclosed in tender document.
If firm LLP (Limited Liability Partnership) is required to submit a copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP, it should be submitted as per given proforma enclosed in tender document.
1.0 The tenderer should indicate clearly replies against item included in this check list. 2.0 Furnished the details of credential Alongwith attested copies of supporting document. 3.0 Quoted the accessories and essential spares. 4.0 Furnished your ITCC (income Tax clearance Certificates. 5.0 Quoted period of completion correctly. 6.0 Kept your offer valid for 60 days. 7.0 Visited the site and have studied the methodology To be adopted for completion of the work. 8.0 Submitted the integration scheme. 9.0 Submitted the BAR CHART /PERT CHART. 10.0 Submitted scheme of completion of work. 11.0 Submitted details of staff working under tenderer. 12. Submit the bid security certificate in appropriate form
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Electrical Work in connection with dismantling and replacement of Old Aged Lighting Towers and Other Electrical Assets over Lucknow Division.
1195-SrDEE-NR-LKO~NR
1195-SrDEE-NR-LKO
Open
Works - General
6 Months
Lucknow, Uttar Pradesh
₹0
₹2.5 L
7 Jan 2026
16 Dec 2025
24 Dec 2025
90 items across 27 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 54,69,091.8 | ||
| — | 23.00 | — | — | ||
| Supply , erection ,testing & commissioning of 16 meter High Mast Tower system with following work. (a)Supply Installation, testing and commissioning of 16 High Mast Tower system totally hot dip galvanized, inside and outside in single dip, suitable for wind velocity 50 meter / sec as per IS 875 part-3. The mast shaft shall be in two sections with one longitudinal seam weld per section and no circumferential weld which can be jointed by slipstress method. The system inincluding head frame, steel wire roap 6 mm dia (7/19construction) Double drum winch, galvanized lantern carriage arrangement suitable for minimum 8 lumiaries symmetrically. The mast shall have integral type high power reverseable Power tool for electrical operation of raising and lowering of lantern carriage mounted in the base compartment of high mast with arrangement to couple with the winch and torque limiter -1 Nos. (b) Supply and erection of foundation bolt manufactured from special steel with nuts, washers, anchor plates and templates-1Set. (c) Supply design and casting of suitable shallow foundation with M-25 for the high mast considering the safe soil bearing capacity at site as 10T / sq meter at 2 meter depth- 1 Nos. (d) Supply erection testing commissioning of Twin dome aviation light having twin type construction with 2 No light of LED type. - 1 Set.(e) Supply installation testing commissioning of heavy gauge hot dipped galvanized lightning finials-1 Nos.(f) Supply installation testing and commissioning of feeder panel comprising of main incoming switch of MCB's, time switch, contactor, reversing starter and protective system etc as required for operation of high mast system - 1 Nos.(g) Supply erection testing and commissioning of copper plate earthing with 600X600X3 mm copper earth plate, pipe and electrode as per drawing and confirming to specification at annexure & IS 3043 including connection to the mast with Copper strip of size 40X6 mm- 2 No. As per Technical Scope of Work. Make of High Mast Tower:- Bajaj, Philips, Crompton, Valmont, Transrail, Wipro, Utkarsh, ,BPP or Other reputed make with prior approval | — | — | — | 54,69,091.8 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .