Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.8 LAccepted-AOC | ₹4.8 L | L1 | Accepted-AOC L1 Below PAC |
| 2 | L2₹5.4 L+₹58,692.98 (12.2%)Rejected-AOC | ₹5.4 L+₹58,692.98 (12.2%) | L2 | Rejected-AOC L2 Below PAC |
| Sl No | Description | Qty | Unit | vinu L2 | RAGHUNATHAN NAIR L1 |
|---|---|---|---|---|---|
| 1.00Additional work | |||||
| 1.00 | 4.1.8
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | 8.1 | m3 | 7,900 ₹63,990 | 7,059.48 ₹57,181.79 Lowest |
| 1.00 | 11.41.2
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by
the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | 126 | m2 | 1,775 ₹2,23,650 | 1,580.64 ₹1,99,160.64 Lowest |
| 1.00 | 21.5
Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in- Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ). | 77.28 | kg | 840 ₹64,915.2 | 752 ₹58,114.56 Lowest |
| 1.00 | 50.12.4.1
Providing and fixing false ceiling with 7.5 mm thick PVC plain panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete
(aluminium frame work shall be paid separately) | 128.1 | m2 | 793 ₹1,01,583.3 | 706.66 ₹90,523.15 Lowest |
| 1.00 | OD33575/2026-2027
Providing and fixing metal mesh of size 50mm x 50mm | 10.5 | m2 | 585 ₹6,142.5 | 522 ₹5,481 Lowest |
| 1.01 | 50.6.2.1
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm
or nearest available size confirming to IS 2185 part I of 1979 for foundation and
plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete | 0.77 | m3 | 6,830 ₹5,224.95 | 6,079 ₹4,650.44 Lowest |
| 1.01 | 13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 5.4 | m2 | 369 ₹1,992.6 | 328 ₹1,771.2 Lowest |
| 1.01 | 2.25
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. | 8.55 | m3 | 318 ₹2,718.9 | 283 ₹2,419.65 Lowest |
| 1.01 | 13.60.1
Wall painting with acrylic emulsion paint of approved brand and manufacture to give
an even shade:Two or more coats on new work | 183.12 | m2 | 172 ₹31,496.64 | 153 ₹28,017.36 Lowest |
Tender Value
₹5.4 L
EMD Value
₹13,562
Closing Date
11 Aug 2026, 5:00 pmClosed
Regional Engineer
Regional Engineer Kerala State Nirmithi Kendra, Regional Office, Vallichira P.O, Pala PIN 686574
PCC, Tile work, Aluminium work, ceiling work etc
2026_KSNK_864049_1
KSNK/TECH/PALA/CWSP-171/2026
Open Tender
Civil Works - Buildings
Item Rate
270 days
Pampady
Refer NIT
6 documents required · 6 mandatory
₹1,085
₹13,562
Yes
11 Sept 2026
4 Aug 2026
13 Aug 2026
4 Aug 2026
11 Aug 2026
4 Aug 2026
4 Aug 2026 - 11 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Additional work | |||||
| 1.001 | 4.1.8
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | 1 | m3 | 1.25 | ₹1.25 |
| 1.002 | 11.41.2
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by
the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | - | m2 | 1.25 | - |
| 1.003 | 21.5
Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in- Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ). | - | kg | 1.25 | - |
| 1.004 | 50.12.4.1
Providing and fixing false ceiling with 7.5 mm thick PVC plain panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete
(aluminium frame work shall be paid separately) | 1 | m2 | 1.25 | ₹1.25 |
| 1.005 | OD33575/2026-2027
Providing and fixing metal mesh of size 50mm x 50mm | - | m2 | 1.25 | - |
| 1.006 | 50.6.2.1
Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm
or nearest available size confirming to IS 2185 part I of 1979 for foundation and
plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete | - | m3 | 1.25 | - |
| 1.007 | 13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | - | m2 | 1.25 | - |
| 1.008 | 2.25
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. | - | m3 | 1.25 | - |
| 1.009 | 13.60.1
Wall painting with acrylic emulsion paint of approved brand and manufacture to give
an even shade:Two or more coats on new work | - | m2 | 1.25 | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.28 MB
Agreement.pdf
Tender Documents • 0.13 MB
TenderCondition.pdf
Other Document • 0.50 MB
EpaymentForm.pdf
Additional Documents • 0.01 MB
BOQ_1461885.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .