Loading…
Loading…
Tender ID
Tender Value
₹1.3 Cr
EMD Value
₹2 L
Closing Date
4 Apr 2026, 4:30 pmClosed
Karnataka Neeravari Nigam Limited
Gururaj C
Providing C.C lining, Recontruction of Structures and Improvements to Service Road For DP-27 of Kuriganuru Distibatory under RBLLC of Ballari Dist
KNNL/2025-26/CN/WORK_INDENT3444/CALL-3
KNNL/2025-26/CN/WORK_INDENT3444/CALL-3
Open
Canals including Lining and Structures
Two Tender Document System(Two Cover)
KNNL Division Canal Div No 6 Bellary
9 documents required · 9 mandatory
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
The intending bidder should have satisfactorily completed (not less than 90% of contract value), at least one similar nature of work such as Providing CC lining for canals including irrigation structures of value not less than Rs. 74.88 Lakhs during the last five years. (2020-21 to 2024-25). The work done certificate should be obtained duly signed from an officer not below the rank of Executive Engineer of the concerned division and countersigned by the superintending Engineer of the same circle should be uploaded. The cost of the work executed in the previous years shall be updated to 2025-26 at 10% per annum.
The intending bidder should have executed in any one financial year the following minimum quantities of work (usually 80% of the peak annual rate of construction) during the last five years (2020-21 to 2024-25). The work done certificate should be obtained duly signed from an officer not below the rank of Executive Engineer 1.Concrete -M-15 and Above 773.19 cum 2.Steel-29.53 Tonne 3.Embankment CNS/Gravel -3025.08 Cum
The annual turnover from all classes of civil engineering works should be costing not less than i.e for Rs.299.53 Lakhs, in any of the two financial years during the last five years (2020-21 to 2024-25) with audited profit and loss account certified by a practicing Chartered Accountant along with the copy of income tax returns filed for the years indicated above should be furnished, Duly mentioning UDIN on Turnover certificate (from CA). The Annual turnover of Pervious Year shall be updated to 2025-26 at 10% per annum.
Liquid asset and/or availability of credit facilities of not less than for Rs.44.93Lakhs, (unconditional credit lines/ letters of credits / certificates from nationalized banks) for meeting the fund requirement etc. The contractor should upload necessary documents issued by the nationalized banks in prescribed format
A copy of the KPWD Class-III & above Contractor Registration Certificate with validity. (Active in period)
Copy of Valid Employees Provident Fund Registration Certificate
Copy of Valid GST Registration Certificate
Latest copy of the Income tax returns (ITR-V) filed duly mentioning PAN number for the Financial year 2024-25 Assessment Year 2025- 26
BID CAPACITY-Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under:Assessed available tender capacity -(AxNx1.5 - B)
₹3,180
₹2 L
4 Apr 2026
30 Mar 2026
6 Apr 2026
18 Mar 2026
18 Mar 2026
23 Mar 2026
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. as per the direction of Engineer incharge to the work.
Excavation and removal of silt and silt mixed with sand from canal bed by manual means including disposing off the same in spoil bank or on the canal embankment in layers as directed with all other ancillary operations complete. In Dry condition complete as per directions of engineer in charge of work.
Providing casing embankment for breached / damaged portion of canal using approved pervious /semi-pervious soil from Borrow areas in layers of 100 to 150 mm ( before compaction ) including cost of all materials, machinery, labour, all operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, sectioning sides / edges, watering, compacting each layer to density control of not less than 95 percent or as stipulated using power roller or pneumatic / vibrating plate compectors with all other anicillary operations complete as per the direction of Engineer incharge to the work.
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 40 mm nominal size graded crushed coarse aggregates complete as per directions of engineer in charge of work.
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates complete as per directions of engineer in charge of work.
Providing casing embankment using semi-pervious / pervious approved soil from borrow areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour, all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges / sides, watering, compacting each layer to density control of not less than 95 percent or as stipulated using power roller and all other ancillary operations complete as per the direction of Engineer incharge to the work.
Dismantling of existing structures like culverts,bridges,retaining walls and other structures comprising of masonry,cement concrete ,wood work ,steel work including T & p Scaffolding whereever necessary,sorting the dismantled material disposal of unservicable materials and stacking of servicable materials with all lifts and lead complete as per specifications and directions of the Engineer in charge of work.Morth Specification No 202 Rubble masonry by Mechanical means
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 40 mm nominal size graded crushed coarse aggregates complete as per directions of engineer in charge of work.
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates) complete as per specifications and as per directions of Engineer-in-charge.
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates complete as per directions of engineer in charge of work.
Providing and laying Reinforced Cement Concrete pipe light duty NP2 for culverts, roadway utilities& crossingsas per IS 458:2003 in Single row including pointing ends and fixing collars with cement mortar 1:2 including cost of all materials, labour, curing completeas per specifications (600mm Dia) as per the direction of Engineer incharge to the work.
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification 2.11.f (Canal & Allied Works) complete as per directions of engineer in charge of work.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Drawings-3444.pdf
Others - Drawings • 7.40 MB
BOQ-3444_Call3.xlsx
Others - BOQ • 0.01 MB
Bid Document-3444_Call3.docx
Tender Document • 10.73 MB
tender Notification works- 3444.docx
Others - Notification • 0.04 MB
specifications.pdf
Others - Specifications • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .