Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹66.7 LAccepted-AOC | L1 | Accepted-AOC Tender awarded to M S K Ramakrishna Rao Co A 129 CEEC for Rs 6668450.00 being the lowest tenderer and rates are found reasonable | |
| 2 | L2₹69.1 L+₹41,076 (0.60%)Rejected-Finance | L2 | Rejected-Finance Being other than the Lowest tenderer |
Tender Value
₹72 L
EMD Value
₹1.3 L
Closing Date
2 Jun 2020, 6:00 pmClosed
Commander Works Engineer 2 Visakhapatnam
Commander Works Engineer 2 ,Chief Engineer Navy Visakhapatnam Complex, Station Road, Visakhapatnam, 530004
DEMOLITION AND RECONSTRUCTION OF WATER TANK AT NAD,SUNABEDA
2020_MES_330867_1
82441
Open Tender
Civil Works
Lump-sum
270 days
GE P N Visakhapatnam
Class C cat a i
6 documents required · 6 mandatory
₹1,000
Yes
GE P N Visakhapatnam
₹1.3 L
Yes
9 Jul 2020
3 Mar 2020
5 Jun 2020
3 Mar 2020
2 Jun 2020
18 Mar 2020
3 Mar 2020 - 9 Mar 2020
Amount
Total amount of Schedule "A" Part-I ( BUILDINGS AND STRUCTURES )
Total amount of Schedule "A" Part-II (DEMOLITION AND DISMANTLING)
Total amount of Schedule "A" Part-III (SITE CLEARANCE AND AREA DEVELOPMENT)
Total amount of Schedule "A" Part-IV (ROAD/PATH/CULVERT/HARDSTANDING )
Total amount of Schedule "A" Part-V (EXTERNAL ELECTRIFICATION )
SCH 'A' PART-VI ( EXTERNAL WATER SUPPLY AND MISCELLANEOUS ITEMS FOR PART-III to V) NOTE : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.6 siginifies this fact only.
Supply,installation and testing of Water level indicator of size 16.80m x 9.25m x 3.55 m made out of MS and SS assembly including scale with radium numbering,indicator with radiator brackets to fix scale & wall tank, indicator rope,float,float rope,lockable pin to lock float & indicator by rope,pulley assembly, pully housing,800 mm adjustable pipe for fixing on top of tank with flange inbuild with pulley housing with following accessories fixing in water (semi under ground sump) complete all as per manufacturers instructions and as directed by Eng-in-charge. Make :Model No.11 of BIMCO
(i) Board: Aluminium powder coated having 150 mm width & acid proof paint marking at every 10 cm with PP roller for frictionless sliding on board. (ii) Cable float : SS 316 (iii) Float assembly : SS 316 (iv) Sheave assembly : Pully housing, aluminium die cast acid proof (v) Top board connector : steel (vi) Board bracket : steel (vii) Indicator assembly : steel (viii) Guide wire indicator/rope : SS-304 (ix) Bottom bracket : Steel (x) Tank length : 3.5 mtrs (xi) Mounting : 1 inch NB,ASA 150 Flange (xii) All wetted parts : SS-304 (xiii) Nozzle length : 800 mm adjustable (xiv) Application : water
Supply, lay,installation and testing of Cast Iron pipes of size 150 mm bore with spigot and socket ends centrifugally cast,class A,in any length laid in trenches including taking down old unserviceable pipes complete all as specified and as directed. Make: Electrosteel/Kesoram/Tisco
S&F Cast iron fittings for spigot and socketed / flanged ends, such as bends (any type, radius and angle), tapers any type (straight ,bend ,increasing,decreasing or double socket,etc), collars, Tee single and double junction / branch cross,Y junction,caps and plugs 150 mm bore etc.,complete all as specified and directed. Make: Electrosteel/Kesoram/Tisco
S&F 150 mm dia cast iron sluice valve both ends flanged non- raising stem type with hand wheel and suitable for pressure rating of PN : 1.6 as per IS- 14846/2000 duly dirlled holes for fixing of nuts and bolts, stem made of high tensile brass ISI marked and conforming to IS 780 Part I including rubber gasket, nuts, bolts and washers,etc and taking down old unserviceable valve,complete all as directed. Make:Kirloskar/L&Tl/Upadhay/Leader
S&F 150 mm dia cast iron sluice valve both ends flanged non- raising stem type with hand wheel and suitable for pressure rating of PN : 1.6 as per IS- 14846/2000 duly dirlled holes for fixing of nuts and bolts, stem made of high tensile brass ISI marked and conforming to IS 780 Part I including rubber gasket, nuts, bolts and washers,etc complete all as directed. Make:Kirloskar/L&Tl/Upadhay/Leader
M&L for cutting existing CI line 150 mm dia bore and reducing to required length in position including insertion of TEE and bends for branch connection with necessary CI specials etc,as required at site complete all as directed.
S&F New generation energy saving and environmental friendly long life LED street light 60 W made up of pressure die cast aluminium with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP-66 ptotection and impact resistance of IK 07 with 10 KV built-in-surge protection device including suitable GI tubing for mounting of street light fitting with brackets,MS clamps,nuts and bolts complete and taking down old light fittings all as specified and directed. Make : Model/cat No.ENDURAPEARL PLUSSL 60 W LED 757 PASYTOPC of Havells or equivalent model in Bajaj/Philips/Surya Roshini/CG/C&S
S&F LED Aviation obstruction light 12 V, power rating 6 W,IP-65,two lamps with all accessories including fixing properly on top of the tank and taking down old light fittings complete all as specified and directed. Make : BINAY/ALTOS/BALIGA/GEC/BAJAJ
S&F Weather proof cable 1100 volts grade heavy duty PVC insulated,stranded aluminium conductor, served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of size one twin core 6 sqmm nominal cross section,flat or circular in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire complete all as specified and directed.
Supply, laying and testing LT UG XLPE cable ,FRLS Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 2 core 10 sq mm laid in trenches /ducts / wall /under road,etc and taking down old cable complete all as specified and directed.
M & L for steel tubular swaged poles complete with cast with iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.0meters long), pole coated with black bituminous paint throughout internally, and externally up to the planting depth and the remaining exterior surface painted with two coats of aluminium paint over a coat of primer including removal of old unserviceable pole complete all as specified.
M&L Brick masonary valve chamber of internal size 750 mm x750 mm x750 mm comprising of 100 mm thick PCC 1:3:6 type C2 foundation, 200 mm thick brick work in CM 1:6 with fly ash bricks, plastering 10 mm thick in cement mortar 1:6 internally and externally, 50 mm thick PCC 1:3:6 type C-1 coping on top of walls, 6 mm thick MS sheet cover fixed on 40X40X6 mm MS angle iron frame with two Nos 150 mm long hinges and one number handle made of MS round bar of 10 mm dia and necessary locking arrangement and painting to steel surface with two coats synthetic enamel paint over a coat of redoxide primer including excavation and earth work in any type of soil,etc complete all as specified and directed.
M/S SANTOSH SATAPATHY
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .