SPECIAL REPAIRS TO 08 PASSENGER LIFTS OF BUILDING NO P 68 TO 79, P 91, P 92 AND P 97 BLOCK G TO U AT SVN COLONY, 104 AREA UNDER GE U II, VISAKHAPATNAM

Amount

Supply and fix Auto door Car operator for 800mm Centre opening door consisting of Car Door Motor 230 Volts, 50Hz, with built-in Rotary Encoder and suitable VVVF Drive, Full Length Infra Red Sensor 64 Beams along Car Door, Transmitter, Receiver and control Unit working on 230 Volts, AC with and including provision of Moon rock finished Stainless steel Car Door panels of existing size made out of 1.5mm thick AISI 304 Grade Stainless Steel sheet with 8mm Toughened Glass Vision Panel of size 200x800mm alongwith bottom aluminium sill, and electromechanical overload sensor/switch with overload indication in COP calibrated to rated load capacity of lift and door closing prevention in case of overload including taking down existing Auto Door Car Operator and Car door panels and sill complete all as specified and directed by Engineer-in-charge. Make : As per OEM

Supply and fix Auto door Landing Mechanism alongwith MS Powder coated frame and bottom Aluminium sill with all fixing accessories sill support and brackets, suitable for existing 800 mm Centre opening Landing door including carefully taking down the existing SS Landing door shifting to civil workshop for necessary modification to the existing SS door panels for cutting and provisioning of vision panel of size 200x800mm with 8mm toughened glass to match with the car door vision panel, re-shifting back to site of work, refixing and testing on completion including taking down existing Auto Door Landing mechanism complete all as specified and directed by Engineer-in-charge. Make : As per OEM Notes: Rates quoted shall deemed to be inclusive of following: (a) Fixing of temporary wooden/plywood shutters at all landing doors opening for safety of the users till installation of modified landing door panels. (b)Repair / making good of any surface flaws found on landing door panels like bend/ buldging including buffing for complete cleanliness at workshop with suitable machinery. (c) Making good/ filling of gaps of damages occured during replacement of landing door frames / mechanism.

Supply and fix COP[Cabin Operating Panel] made out of AISI 304 Grade hairline design mirror finished Stainless Steel Sheet 1.5 mm thick including push Buttons alongwith Digital Display Card, Lock, all relevant features, wiring and provision of inbuilt hands free / Push to talk(PTT) 3 way intercom system for ground floor, cabin and machine room including taking down existing COP complete all as specified and directed by Engineer-in-charge. Make : As per OEM

Supply & fix LOP[Landing Operating Panel] made out of AISI 304 Grade hairline design mirror finished Stainless Steel sheet of 1.5mm thick including push Buttons, Lock alongwith Digital Display Card, all relevant features & wiring etc, including taking down existing LOP complete all as specified and directed by Engineer-in-charge. Make : As per OEM

Supply & fix Main Hoist Steel Wire Rope of size 13 mm, Heavy Duty including taking down existing hoist steel rope complete all as specified and directed by Engineer-in-charge. Make : Usha Martin

Supply & Fix VVVF Drive 11KW to 15 KW as per site requirement for existing lift motor including feeding all parameters and interfacing with controller micro processor and drive including setting of basic parameters to obtain the desired and designed value of various motions of the lift complete all as per manufacturer's instructions including taking down existing VVVF Drive complete all as specified and directed by Engineer-in-charge. Make : Toshiba / YASAKAWA / GEFRAN / WEG

Supply & fix Micro Processor based Controller panel for full collective operation to match with existing Auto Door Lift including software development complete all as to match with existing one side opening lift for G+9 Floors suitable for 08 passenger capacity lift including all accessories, Microprocessor, Input, Output Modules, BCD Card, Relays, Power contactor, Auxiliary contactor, Transformer, MCB etc complete with enclosure made out of 1.6mm thick CRCA sheet duly powder coat painted including testing and commissioning and taking down existing controller complete all as specified and direted by Engineer-in-charge. Make of Microprocessor : Allen Bradley / Toshiba Make of Panel & accessories : As per OEM

Supply & fix Automatic Rescue Device of UPS based with Battery voltage of 72 Volts (12Vx6Nos, 7 AH) with Battery Charging Unit/ Circuit, converter card and microcontroller based Mosfet card complete with encloser including provision of all indications like Battery Charging, Rescue Operations ON / OFF, Lift Moving Up / Down, Safety complete for the safe and satisfactory operation of the ARD suitable for 08 Passenger capacity Lift of multi-storeyed Buildings up to G+9 Floors complete, including taking down existing ARD complete all as specified and directed by Engineer-in-charge. Make : As per OEM

Supply, fixing, Connecting & testing of Trailing cable 12 CoreX0.75 Sq.mm stranded copper conductor including taking down existing trailing cable of any description complete all as specified and directed by Engineer-in-charge. Make : As per OEM

Supply & fix Gear Box suitable for 08 Passenger Capacity Lifts, with 1.5 MPS speed serving G+9 Floors with a travel distance of 30 Metres along with Traction Sheave complete coupled with existing/new motor and testing all as per manufacturer’s instructions, including taking down existing gear box complete all as specified and directed by Engineer-in-charge. Make : As per OEM

Supply & fix Induction Motor AC, 3ph, 380V, 50Hz, 1440RPM copper wound with class 'F' insulation suitable for Gear Box of 08 Passenger capacity Lifts for 1.5 MPS speed, serving G+9 Floors with a travel distance of 30 Metres along with Break Assembly and Drum including testing all as per manufacturer’s instructions, including taking down existing Induction motor complete all as per specified and directed by Engineer-in-charge. Make : As per OEM

Material and Labour for MS base frame made out of MC100 cut to required size and shape, drilled holes including necessary welding/fixing with suitable nuts, bolts & washers grouting in cement concrete etc, complete suitable for mounting gear and motor unit of 08 passenger capacity lift with and including suitable anti vibration rubber mounting pads and arresting clamps welded to base frame complete including taking down existing MS base frame complete all as per specified ad directed by Engineer-in-charge.

Supply & fix Hollow Shaft Rotary Encoder, incremental pulses 1024 pulses, shaft dia 30mm, working voltage 24V DC for Speed feedback of Main Drive complete, including taking down existing Rotary Encoder complete all as specified and directed by Engineer-in-charge. Make : YUMO /FENAC /MONTANARI

Supply & fix cabin axial flow fan 300mm sweep, suitable for recessed mounting in false ceiling complete, including taking down existing cabin fan complete all as specified and directed by Engineer-in-charge. Make: As per OEM

Supply and fix recessed mounted circular LED light fitting 5W capacity suitable for lift cabin ceiling, including taking down existing cabin LED light complete all as specified and directed by Engineer-in-charge. Make : Philips/Havells/Wipro

Supply & fix in replacement of hand rail made out of 38mm dia 304 grade stainless steel pipe with closed and smooth finished ends of length suitable for 08 Passenger capacity lift complete all as specified and directed by Engineer-in-charge. Make : As per OEM

Notes for Serial Item No. 1 to 16 of BoQ: [a] The work shall be carried out in the Lifts installed at Building No P-68 to 79, P-91, P-92 & P-97 (Block G to U) at SVN Colony, 104 Area. [b] Make of the Lifts : IES [c] The contractor shall carryout the repair works under this contract through the Original Equipment Manufacturer of the lifts . The contractor shall submit MoU from the Original Equipment Manufacturer of the Lifts to provide technical support, trained persons for carrying out repairs/ replacement & testing of lift components/ accessories/ controllers alongwith technical bid. The spares shall be of the make as per existing or as per OEM recommendations.

INDUSTRIAL ENGINEERING SYSTEMS (BID ID -3238322)

UNIVERSAL ENTERPRISES (BID ID -3238835)

REAL ENGINEERING WORKS (BID ID -3239130)

SERVO-TECH ENTERPRISES (BID ID -3238223)