Shifting of electrical poles, Transformer sub-stations, HT(11KV)/LT line etc./ shifting of utilities lines falling in the newly constructing RCC covered drain / proposed alignment for RCC covered drain with the approch road NH8 right side

Supply of 8.0 mtr. Long PCC Pole, 200Kg. Working load as per specification and drawing.

Supply of 12.0 Mtr. Long steel tubular pole 410 SP 60

Supply of Galvanized Stranded stay wire (7/2.5mm)

Supply of 8 SWG GI Wire

Supply of Polimer insulators 5KN with hardware fittings, hardware etc. as required as per the technical specification, approved drawing and scope of work. 11KV Pin insulator with hardware fittings.

Supply of 11 KV Polimer composite Disc Insulator 45KN

Supply of 11 KV Disc Fittings (6/1/2.59SQMM)

Supply of Triple pole (3 phase), vertical type 12 KV, 200 Amp. Manually gang operated, air brake switch, 3 post vertical type single brake, complete with post insulator for operation in 11 KV, 50 Hz, AC system as per relevant IS specification.

Supply of Triple pole (3 phase), 12 KV, 200 Amp. drop out fuse unit for operation in 11 KV, 50 Hz, AC system as per relevant IS specification along.

Supply of 9 KV, 5KA Gapless Silicon Polymeric Lightning Arrestors conform to IEC 60099-4 /IS-3070 Part-3 - 1993 with latest amendments

Supply of PVC insulated PVC sheated 1100 V Grade single core PVC cable 120sq.mm

Supply of Brown glazed porcelain shackle insulator of size 4''X4.5'' with hole

Supply of G.I. Straps and Bolts, 185 mm x 30 mm x 3 mm including Supply of Nuts & Bolts etc. as required.

Supply of MS Nuts & Bolts (16x90mm,16x75mm &12X250mm )

Supply of 100X50X50X6MM MS channel

Supply of 65X65X6MM MS angle

Supply of PVC insulated PVC sheated 1100 V Grade single core PVC cable 4 sq.mm

Supply of 60Kg Salt & 55Kg Charcoal ( For 1 Pit).

Supply of 1/2'' dia polythene pipe

Supply of Febricated clamps of assorted size of MS flat (50 x 6 mm) with double coat of red oxide primer coating .

Supply of Lugs 120Sqmm (Aluminium)

Erection of 12mtrs length of Steel Tubular POLE at any kind of soil upto a depth of 1/6 th of pole height, including excavation of earth, refilling the pit with soil upto the ground level, ramming and making complete in all respect.

Laying & strining & commissioning of 1KM (Single Conductor) , 8 SWG GI wire including hoisting & binding etc. Complete as required.

Erection & commissioning of 11KV Polimer Pin insulator along with Pin.

Erection & commissioning of 11KV Single Disc insulator set along with necessary fittings.

Erection & commissioning of shackle insulator of size 4''x4.5'' with straps & bolts/U clamp on poles ( Excluding the cost of cost of straps/ U Clamp, Nuts & Bolts)

Erection of "C" type bracket for LT 5-wire of 65 x65 x 6 mm( Excluding the cost of Back Clamp, Nuts & Bolts)

Earthing with G.I pipe 2.5mtr. Long and 40mm dia, including excavation, refilling with alternate layer of salt & Charcoal as per drawing (excluding supply of G.I.Pipe, Salt & Charcoal, Gi wire, nuts &bolts, etc. as required)

Installation/Positioning of 11/0.430KV,3-Phase 200KVA of Distribution Transformer on Pole with necessary connections & fitting fixing of all allied accessories components as required for making complete in all respect for energizing.

Installation/Positioning of 11/0.430KV,3-Phase 100KVA of Distribution Transformer on Pole with necessary connections & fitting fixing of all allied accessories components as required for making complete in all respect for energizing.

Erection of 11KV protective Guarding by GI wire 8 SWG as per technical specification,across road/River/Telecom line etc. in horizonta formation complete .

Erection of protective Guarding/Cross lacing for 415/240Volt line BY GI wire 8/10SWG as per technical specification,across road/River/Telecom line etc. in horizontal/Verticle formation complete with Spool/Reel insulator.

Maintaining adequate clearance from overhead live conductors by Trimming of tree branches for Way Leaves .

supply and making straight through cable jointing with heat shrinkable jointing kits complete with all accessories for following size of 3 core XLPE UG Cable of 11 KV grade as required - 185sqmm

Febrication of different sizes Cross-Arms by MS Channel/MS Angle as per specification

Dismantling of Stay set from the earth complete with 19mm x 1800 mm long stay rod, anchor plate of size 300 x 300 x 8 mm ,thimble, turn buckle, 7/3.15 mm dia G.I Standed stay wire and stain insulator etc. and making complete in all respect.

Dismantling of M.S.Angle Cross-Arm bracket of 2/3/4 wire ,upto 1100Mtr. Long of 50 x 50 x6mm/ 65 x65 x 6 mm

Dismantling of M.S.Channel Cross-Arm,0.3 to 1.6 Mtr. Long75 x40 x 40 x 6 mm

Dismantling of shackle insulator of size 75mm x 90mm /100mm x 15mm with straps & bolts/U clamp on poles

Dismantling of 11KV Pin insulator along with Pin.

Dismantling of 11KV Single Disc insulator set along with necessary fittings.

Dismantling of protective Guarding/ Cross lacing for 415/ 240 Volt line BY GI wire 98 / 10 SWG as per technical specification, across road/ River/ Telecom line etc. in horizontal/ Verticle formation complete with Spool/ Reel insulator.

Dismantling of 1KM (Single Conductor) , 10/8SWG GI wire including coiling etc. Complete as required.

Dismantling of 11KV DOF unit set of three nos. including necessary connections .

Dismantling of 11KV 200 Amp. GOS unit set of three nos. including necessary connection .

Dismantling of 11/0.430KV,3-Phase 200KVA of Distribution Transformer on Pole with necessary connections .

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a leadof 50 m. -All kinds of soil

Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. -All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level: i)1 : 4 : 8 ( 1 cement : 4 fine sand : 8 graded stone aggregate of 40 mm nominal size)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor five level. i) Thermo-Mechanically Treated bars of grade Fe-500D or more

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- -All work upto plinth level: i).1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishingand reinforcement- 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement- i).1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)

Centering shuttering including struttings, propping etc. and removal of form work for: i) Foundations, footings, bases for columns. . for mass concrete with timber plank

ii) Columns, piers, abutments, pillaras, posts and struts. Shuttering with ply

iii) Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply

iv) Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply

First class brick work in foundation and plinth including cost of all materials as required complete:- i). In Cement mortar 1:4 ( 1 cement : 4 fine sand )

ii). 12 mm cement plaster of mix i)Cement mortar 1:6 ( 1 cement : 6 fine sand )

Neat cement punning.

Providing structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required.

Providing and fixing hard drawn steel wire fabric 75 x 25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62 x 19 mm beading of Gamair wood.

Providing and fixing ISI marked oxidised M.S.sliding door bolts with nuts and screws etc. complete i) 300x16mm

Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. [Payment shall be made after submission of Test Certificate issued by the Manufacturer] i) two coats

Finishing walls with water proofing cement paint of required shade of approved brand and manufacture on new work ( two or more coats applied @ 3.84 kg/10 sqm) complete. [Payment shall be made after submission of Test Certificate issued by the Manufacturer) New work ( two or more coats applied @ 3.84 kg/10 sqm)