PROVN OF 02 X ATTACHED BATHROOM NEAR BLDG NO P-378 (BDE JCO MESS) AND PROVN OF PARKING SHED IN FRONT OF BLDG NO T-309 IN ZONE N AT MIL STN AGARTALA

Amount

Schedule'A' Part-I: B&R works

Surfce excavation N.Exc 30cm deep and averaging 15cm deep and getting out in hard/dence soil.

Excavation in trenches n.exc 1.5 M wide and n.exc 1.5m deep as in soft/loose soil for foundation etc or for shaft walls, cesspit, manhole etc n.exc 10Sqm on plan

Excavating over areas, n exc 1.5 m deep and getting out in soft loose soil

M & L for PCC 1:4:8 type D-2 (using 40mm graded aggregate) as in foundation filling and mass concrete.

Material and labour for brick work with locally available sub class ‘B’, old size, best quality bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) all as specified and directed.

M and L for half brick thick brick work sub class 'B' brick straight or curved on plan to any radius in CM 1:4 complete all as spd and directed .

Returning, filling including spreading, levelling and well ramming in layers not exceeding 25 cm in each layer as in hard / dense soil complete.

Removing excavated material exc 250 Mtrs but n exc 500 Mtrs and depositing where directed by Engineer-in-Charge.

M & L for RCC type B-1 (1:2:4) using 20mm graded agregate in beams, cantilevers, bressummers, lintels over 1.5m span

M&L RCC type B-1 (1:2:4) using 20 mm grades aggregate in slab, supported on walls beams and columns in floors roofs landings

M&L TMT bars of 10mm dia and over cut to lenth, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia.

M and L for TMT bar 6 to 8mm dia as in stirrups, spacers and binders

M&L for rough finished surfaces of concrete flat formwork to sides and soffits of floor or roof beams, lintels, cantilevers shelves etc

M&L form work for flat fair finished surfaces of concrete to soffits of suspended slabs such as roof slab not exceeding 200mm thick

M & L hard core of broken stone boulders to gauge n exc 63 mm all as spd and directed by Engineer-in-charge.

M&L for sand filling under floor including watering and consolidationcomplete all as spd and directed

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm brick aggregate) as in sub-base, to floor and foothpath etc complete all as specified and directed

M and L for 75 mm thick PCC 1:2:4 type B-2 40mm graded agg in plinth protection

M&L for 15 mm thick rendering in CM 1:4 in finishing the surface even and smooth without using extra cement. Using liquid water proofing compound @ 200ml per 50 Kg of cement ( water proofing shall be paid separately )

M&L for 15mm thick plaster on fair faces of brick or concrete surfaces in CM 1:6 finshed even and smooth without using extra cement complete all as spd.

Supply of liqiud integral water proofing compound

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint and over one coat of alkali resistent priming paint complete all as specified and directed.

Matereal and Labour for preparation of new wall surfaces and apply 1mm thick putty on wall surface to make surfaces even and smoonth there after apply two coat of oil bond distember on wall.

M & L for 5 mm thick rendering in CM (1:4) on fair face of concrete surfaces as in ceiling etc finished even and smooth without using extra cement.

M and L for 02 coats of white wash on ceiling incl prep of surfaces

M and L for pressed steel frames for of size 125 x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

S & F 35 mm II nd class hard wood plain framed ,panelled shutters (any numbers of panells), with panells of timber flat on both sides (feather edged ) or of veneered particle board medium dencity , wood particle with commercial face veneers : supplied and fitted to chowkats.

S and F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

M & L preparation of new wooden surfaces with two coats of synthetic enamel paint over a coat of pink primer exc 10 cm width or girth

S&F 200mm long aluminium anodized barrel tower bolts of extruded section.

S&F 150mm size extruded aluminum alloy handles, fabricated type, anodized.

M&L mild steel work such as hold fasts, hooks, clamps etc and similar work conforming to Fe 290. Gde-165

S&F Mild steel sliding door bolts of size 300mm length of bolt, plate type, stove enamelled black with bright bolt not less than 12 mm dia with nad including a minimum of 6 bolts and nuts, four on bolt plate & two on staple plate.

M&L for 2nd class HW in small fittings such as wooden cleats stopper including all necessary labour article n.exc 200 cm each.

M&L for PCC 1:2:4 type B1 (20 mm graded stone aggregate) for fixing hold fasts.

S&F steel windows with side hung shutters including projecting type hinges with steel handle ,and steel peg stay, complete with glazing bars,dovetailed or welded .

All as per item No 36 above but without glazing bars .

S&F Steel ventilator with top hung shutter including hinges,steel peg stay complete all as directed.

S & F 4 mm thick sheet glass ordinary quality & glazing with oil putty in squares n exe 0.5 sqm in each pane

M&L mild steel work such as grills ,guard bars etc and similar work conforming to Fe290 GDE E-165

M&L for 2 coats of synthetic enamel paint over coat of red oxide zinc chrome on steel surfaces over 10cm width or girth including preparation of new surfaces.

S&F mild steel framed work such as grills grating etc with and soft bars shouldrs of riveted or forged into spikes, framed guard bars and similar work all as spd made of 12mm square bars.

M & L Non - skid Ceramic colour tile 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed in CM 1:4

M and L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match embeded over 10 thick plaster in CM 1:4 as backing.

S & F in repairs vitreous china wash down water closet pan pedestal patern white/coloured seat cover complete taking down old seat fixing bolt flush pipe complete all as specified.

S&F PVC valveless syphonic action type, flushing cistern of 10 litres capacity with all accessories incl PVC connection 15mm dia 45cm long.

S&F pvc connector 15mm size with PTMT nuts of length 600mm .

S and F 15 mm bore bib tap CP brass all as spd and directed by Engr-in-Charge

S&F 15mm bore stop valve fancy type,chromium plated , screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S and F Vitreous China wash basin, white, flat back, size 550x400mm including fixing bracket , CP waste couping , and waste pipe , front pedestral complete all spd Make - Cera or equivalent make as decided by Engr-in-Charge

S&F pillar taps 15mm dia bore fancy type with capstain heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe.

Soap dish, any type, fixed to plugs with chromium plated brass screws

S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60cm long between flangs. Make - Cera/Prayag or Equivalent as decided by Engineer -in-Charge.

Supply and fix brass chromium plated shower rose 125mm size with or without swivel joints, any size including fixing to steel pipe or union

S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or for unions and fixed .

S&F 20mm bore ball brass valve high pressure with polythene float & fly nut compelete screwed for iron pipe or brass ferrule.

Supply only flush pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern

S & F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified

S & F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified

S & F 110 mm PVC (SWR) bends any radius complete all as specified.

S & F75 mm PVC (SWR) bends any radius complete all as specified.

S F 75 mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified.

S & F 75 mm PVC (SWR) vent cowl

PVC (SWR) gully trap or floor trap 125/110 mm, setting and jointing with solvent cement

M&L 15mm bore tubes medium grade with all fittings and fixed on walls and ceiling or laid in floors.

S&F20mm bore GI tubing memdium grade fixed to wall.

S&F25mm bore GI tubing memdium grade fixed to wall or floor

Rotational moulded polye?thylene water storage tanks 1000 LTR (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

M and L for supply and fixing 2-in-1 bib tap made of copper alloy 15mm bore suitable for fixing health facet for EWC

S & F Health faucets ABS with rubbit cleaning sys, 1.25 M long PVC flexible tube and ABS wall hook

M & L for broken brick aggregate hard core of gauge not exec 63 mm deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed toa true surface all as specified and directed by Engr-in-charge.

M&L for 100 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

Excavating post holes (or similer holes) each n.exc 0.5 cum getting out,returning filling and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm watering and removing surplus soil to a distence n.exc 50m making gd surface soft/loose soil surface all as specified and directed.

S&F for rolled mild steel in joist channel angle or Tee section fxed indipendently wthout connecting plates etc confirming to Fe-410-W(Gde-E-250) quality-B of all specified and directed.

S&F froof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam,tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe-410-W(Gde-E-250) quality-B of all specified and directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified.

Material & Labour 15 mm thick screed bed or bedding layer of mortar in cm 1:4 for laying floor tiles complete all as specified and directed.

M&L pre polished machine pressed chequred 300 mm x 300 mm x 22-25 mm thick tiles set jointed in neat cement slurry & pointed with coloured cement to match over cement mortar screed bed (1:4) fixed as per manufacturer instruction.

Schedule'A' Part-I: E & M works

Point wiring with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 1.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping (ISI Mark) with all accessories including providing sunk cast pressed steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing 3 mm thick plastic laminated bakelite sheet(HYLUM BRAND) top cover alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLSH) copper conductor cable of size 1.5 Sqmm as continous earth wire connected to common earth and earth dolly complete all as specified.

One light / Fan / Bell Point controlled by one way switch 5 Amp.

One 3 pin 5 Amp socket out let controlled by one switch on same board.

Point wiring for Power point contolled by one 15 Amp switch independent with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 2.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping(ISI Mark) with all accessories including providing sunk cast pressed steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing 3 mm thick plastic laminated bakelite sheet(HYLUM BRAND) top cover alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 2.5 Sqmm as continous earth wire connected to common earth and erth dolly complete all as specified and as directed.

Supply & fixing switch piano flush type (ISI marked), single pole, one way 5/6 Amp, 240 Volts complete all as specified & directed.

Supply and fixing switch socket combination 2 in 1, 3 pin, 6 Amp piano complete all as specified & directed.

S& F switch socket combination, multipurpose 2 in 1, 5/6 pin, 15 Amp flush type (ISI marked) complete controlled by one switch complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuse 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. PF not less than 0.85 (min) , 1000 Lumen output incl.

S & F lamp holder insulated body with back plate for batten fitting incl dismentling taking down unsv one all as specified and as directed.

Supply & fixing of LED Adore 1 x 9 watt, 825 lumen output, B-22 CDL, Ball lamp (pin type), 230 volt, PF not less than 0.85 (min) incl. complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single phase, 230 V of size 300 m sweep with, blades, and frame and louvers. Complete all as specified and directed.

S & F LED light fitting 1 x 9W / 1 X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size

Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed.

Material&Labour PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 175 x 100 x 50mm .

S &F Miniature circuit breaker single pole and neutral 40 Amps, 230 volt, 10 KA, C-curve all as specified and directed.

S &F Miniature circuit breaker single pole 6 Amps to 32 Amps, 230 volt, 10 KA, C-curve all as specified and directed.

Supply & Fixing sheet metal enclosure with single door for DBs conforms to IS:8623.III , IP:43 protection, shrouded neutral bar and cement spill protector, 8 way, 240 Volt .

Suuplying and Laying testing XLPE insulated steel wire/ strip armoured cable 10 Sqmm 4 core heavy duty, 1100 volt grade, multistranded aluminium conductor cable laid into trench, passing through pipe, ducts, making electrical connection over pole / panel at one end and into the MCB DB's / Main switch / Change over switch through proper lugs / thimbles at the another end, having following nominal cross sectional area all as specified and directed.

M & L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 4.0 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 4 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces all as specified and directed. NOTE: (a)Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.

S & F GI steel tubing light grade for protection of cable on poles, under road crossing etc of 25 mm dia

Material and labour for sand filling around the cable with approved quality coarse sand for sand cushioning of under ground cable including spreading and punning down to desired thickness complete all as specified and as directed.

Supply and laying brunt brick sub class 'B' of size 23x11.5x7.5 cm locally available best quality laid in treanches for protections of under ground cable complete all as specified and as directed.

S&F as in replacement LED building security light 25 watt, 230 V, 3000 Lumen output complete, IP 66 with all accessories and including connecting upto ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20 mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener incl dismantling taking down unsv fitting any type all as specified and directed.

XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 4 sq mm. 2 core.

NOTES :- 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc, required for complete and proper execution of the work. Refer Schedule 'A' notes for details.

SHRI RAJESH DEY

M/s Amrit Gope

M/S SANKAR GOPE

M/S PAUL ENTERPRISE

Pranjit kar