REPAIR AND MAINT TO FENCING BOUNDARY WALLS STEPS GATES, FOOTPATHS, CULVERTS AND DRAINS IN OLD TAB N AREA, BSO YARD SEC HOSPITAL COMPLEX AND OTHER LOCATIONS UNDER AGE B/R-II AT IMA DEHRADUN

Taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water etc complete as specified

M&L for Rendering 15mm thick plaster on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement and mixed with water proofing compound as per manufactures instructions, complete all as specified and directed. Note-water proofing compound shall be measured and paid separately.

Supply only Liquid water proofing compound ISI marked

M&L for for Factory made Precast heavy duty RCC drain cover 80mm thick type B1 (1:2:4) with 20 mm graded aggregates, with using 10mm dia reinforcement TMT bar (150 mm C/C both ways) including 1.00mm thick MS black sheet frame on edges 80mm wide with two coats of anti-corrosive paint over primer all complete, as specified and directed.

M&L for heavy duty vitrified exterior grade tiles 300mmX 300mmX10-12 mm thick, set, over and incl 20 mm thick cement mortar 1:4 bedding and jointed and pointed in neat cement surry in floors with pigments incl taking down old tiles complete all as specified and directed.

M&L for Machine cut kota stone slab flooring mirror finished 20-25 mm thick (each slab not less than 0.25 Sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 20 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing and polishing complete incl dismantling of Old kota stone all as specified and directed.

M&L for mirror polishing incl Cutting and grinding of existing Granite/kota/terrazo stone floor surface on horizontal and vertical surface and finally finishing the surfaces uniformally by applying floor polish to give high gloss finish complete all as specified and directed by Engr-in-Charge.

M&L for 300x300x25mm thick (M-35) glossy finish polished red color Chequered cement concrete tile of any pattern as decided by Engr-in-charge as in floors/pavings laid over 20 mm thick screed bed in cement mortar 1:6 laid and jointed with white cement slurry mixed with pigment to match the shade of tile complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed.

S&F Coloured machine pressed/vibro mechanically floated interlocking paver block any shape and size confirming to IS - 15658-2006 of 80 mm thickness, M-40 grade, with topping of cement mixed with imported pigment colour and shape shall be approved and including dismantling old paver tiles complete all as specified and directed by Engr-in-Charge.

M&L for dismantling precast coloured concrete Interlocking paver blocks any shape and size and refixing with & including 25mm thick sand cushioning layer complete, all as specified and directed.