REPAIRS TO JOINERY PLUMBING AND SANITARY FITTING AT ASHOKA PARK PALLAVA PARK BVY VISWAKARMA CTW NSB NAMAC WED BSO CANTEEN BLDG AND OLD MO V UNDER AGE BR III OF GE ND VISAKHAPATNAM

Amount

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and directed.

GI frame work for seamless ciling comprising of GI permeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to suurounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9mm thick having two equal flages of 15mm each and web of 45mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fateners with and including ceiling section (not exc 1.2m lenght) of 0.55 mm thickness having urled web of 50mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed

Seamless calcium silicate ceiling 12 mm thick made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish complete all as specified and directed (Frame work for ceiling shall be measured and paid separately)

Applying two coats of Oil bound distemper over alkali resistant priming paint over 1 mm thick cement based wall care putty in ceilings complete all as specified and as directed

Dismantling of corrugated or semi corrugated asbestos cement sheets or CGI/PGI sheets in roof covering complete all as specified and directed.

0.50 mm thick pre-painted corrugated/’Z’ profile galvalume roofing sheets as in roofing (in any location and any type) having high strength steel with minimum 550 Mpa strength hot dip coated with aluminium zinc alloy (55% aluminium and 45% zinc) pre-painted with primer coat of 5 micron and coated with Silicon modified polyester coating of 20 micron and alkalyed coating of 10 micron on reverse side. End rib, side over lap and over lap of sheets shall be designed for anti capillary activities to avoid any seepage of water through lateral overlap as per manufacturer’s instructions, including fixing with self drilling and self tapping screws 0.5mm dia full threaded, all Kautex coated and fitted with EPDM washers in stainless steel. The screws shall be coated with anti-corrosive substance to ensure longer life and shall be fixed using drill guns for lead proof installation. Screws shall be of “HILTI” make. Complete all as specified and directed.

Fiber glass reinforced translucent corrugated sheeting 2mm thick with two corrugations side lap fixed with self tapping self driven screws and washer 0.5mm dia full threaded, all Kautex coated and fitted with EPDM washers in stainless steel. The screws shall be coated with anti-corrosive substance to ensure longer life and shall be fixed using drill guns for lead proof installation. Screws shall be of “HILTI” make. Sheets shall be conformibg to IS-2866-1989complete all as specified and directed

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old sheets complete all as specified and directed.

Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.

Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Grade E 250 [Fe-410W Quality A] with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixingcomplete all as specified and directed.

Roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam tee, angle, channel or flat sections) including clits etc conforming to Grade E 250 [Fe-410W Quality A] complete all as specified and directed.

Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles confirming to Grade E 165 [Fe-290] complete all as specified and directed.

Painting two coats of synthetic enamel paint over a coat of red oxide primer to new steel Surfaces of any description, not otherwise described, over 10cm width or girth including prepration of surfaces complete all as specified and directed..

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) complete all as specified and directed.

Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and directed..

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sq. M each complete all as specified and directed.

Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed..

2nd class hardwood 35mm thick, factory made plain, framed, panelled shutters (two panels), with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically presure treated fitted to chowkats complete all as directed.

2nd class hard wood 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge, etc. complete all as directed.

2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc. complete all as specified and directed.

S&F in repairs Double action floor spring hydraulically regulated made up of 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Preparing surfaces of wood and wood based materials, steel and iron work new or old, of any description and girth not otherwise described, and treating ends of posts, backs of chowkats, etc., area tarred exceeding 0.1 Sq. M and not exceeding 0.5 Sq. M each with tar or coal tar black paint complete all as specified and directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed.

Factory made PVC ventilator made out of multi chamber PVC hollow section DWUF 405 (40x46mm) with 3mm pin headed glass fixed to the lower section using extruded PVC section of 9x19.5mm size OL19 with EPDM gasket (SPL 003) for both PVC sections. ventilator's centre mullion shall be made up of multi chamber hellow PVC section DWUF-406 (63.5mmX40mm) with EPDM gasket is used. GL-19 is fixed to the 3 sides of DWUF-405 and DWUF 406 (63.5X40mm) above he centre mullion. Glass panels with aluminium lower set is fixed to the frame DWUF-405 on the top of the ventilator for the glass. DWUF 405 and DWUF 406 comers shall be metre cut and welded, jointed with 12mm Ms rods (Guard bars) and necessary fixtures including necessary fixing arrangement and aluminium mosquito proof wire mesh of aperture 1.40 and dia of wire 0.36mm complete all as specified and directed

S & F in repair Cast iron body door closer hydraulically regulated, designation No. 3 universal type , suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified and directed

4 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed

Aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.

S & F in repairs 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed

S & F in repairs Aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

100mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed.

75mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed.

150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

100 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F fixed in repairs 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

Aluminium plate type II Gate and shutter, hook & eye 125 mm size complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed.

Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.

Brick work with fly ash bricks, straight or curved on plan in half brick thick wall built in cement mortar 1:6 complete all as specified and directed..

walling of random rubble stone masonary unsoursed well bonded beded & solidly hearted built in CM 1:6 complete all as specified and directed.

Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished fair and even without using extra cement complete all as specified and directed

Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish materials where directed at low lying areas in defence land complete all as specified and directed

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished fair and even without using extra cement including mixing of water proofing compound complete all as specified and directed. Water proofing compound to be measured and paid seperately.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished smooth and even without using extra cement complete all as specified and directed.

Rendering 5 mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished fair and even without using extra cement complete all as specified and directed.

Demolition of un-reinforced cement concrete above ground floor exceeding 15 cm thickness complete all as specified and directed.

75mm thick PCC (1:2:4) type B1 using 20mm graded crushed stone aggregate in floorings with out using extra cement complete all as specified and directed

Glass dividing strips, 3mm thick 38mm width inserted in position conformin to design complete all as specified and directed

50 mm thick cement concrete 1:3:6 type C-2, using 40 mm graded crushed stone aggregate as in plinth protection laid to slope , finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.

Plain cement concrete, type C-2, 1:3:6 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

100 mm thick cement concrete 1:2:4 type B-2, using 40 mm graded crushed stone aggregate as in road / path, hard standing etc. with and including all necessary form work to divide the area in panels not exc. 9 Sqm each and providing 10 mm thick joints through out the thickness of road / path duly filled with mastic filling of one part of 85 / 25 hot bitumen and three part of coarse sand (By weight) with and including making impression of expanded metal whilst concrete is green complete all as specified and directed.

Cement concrete designer tiles 25cm x 25cm x 22mm with mixture of white & grey cement in equal proportions & no pigments over and including 15mm screed bed of CM 1:4 on the foot path complete all as specified and directed.

Demolition of reinforced cement concrete in any position and any description including cutting of reinforcement bars to facilitate demolition complete all as specified and directed.

Design Mix Reinforced cement concrete M-30 grade, using 20 mm graded crushed stone aggregate, as in beams, cantilevers, bressummers, lintels over 1.50 m span and the like complete all as specified and directed.

Precast RCC 1:2:4 type B1 using 20 mm graded crushed stone aggregates as in slabs set in CM(1:6) complete all as specified and directed.

Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Taking down rain water pipes including all fittings any size and pattern complete all as specified and directed.

75 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed .

110mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

75 mm dia PVC(SWR) branch piece,single (single Y) equal or unequal with access door complete all as specified and directed

110 dia PVC(SWR) branch piece,single (single Y) equal or unequal with access door complete all as specified and directed

75 mm dia PVC Bends (any Radius) with access door complete all as specified and directed

110 mm dia PVC Bends (any Radius) with access door complete all as specified and directed

110 mm bore PVC (SWR) vent cowl complete all as specified and directed

S & F in repairs vitreous China squatting pan white orissa pattern size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron P trap including cement concrete bedding and making good the disturbed portion to match with the existing finishes of floor complete all as specified and directed.

S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

10 Ltr capacity PVC valveless symphonic action type flushing cistern, low level with inlet , ball valve, float including necessary flush pipe complete all as specified and directed.

PVC connection 15 mm dia with PTMT nuts of length 450mm long complete all as specified and directed.

S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed..

S&F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F in repairs stainless steel Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed..

S & F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed..

S & F in repairs 100 mm to 125 mm bore mild steel chromium plated grating fixed on floor trap/Nahni trap in CM 1:6 complete all as specified and directed.

S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs CP shower rose 75 mm dia with or without Swivel joints any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs 20mm dia Ball brass valves, high pressure,with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repairs 25 mm dia Ball brass valves, high pressure,with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15 mm dia Ball brass valves, high pressure,with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

15 mm bore Galvanized mild Steel tubes, medium grade for flush pipes, water supply pipes etc fixed to walls and ceilings or laid in floors including taking down and removing from site old pipes complete all as specified and directed.

20 mm bore Galvanized mild Steel tubes, medium grade for flush pipes, water supply pipes etc fixed to walls and ceilings or laid in floors including taking down and removing from site old pipes complete all as specified and directed.

Roughening surfaces of old concrete floor or concrete surfaces by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

Brushing neat cement slurry with 3 Kg cement per Sqm complete all as specified and directed..

Applying a coat of water proofing chemical NITTO PROOF 120 over a coat of NITO Primer over concrete surfances for water proofing treatment to sunken floors complete all as specified and directed..

Supply only Integral water proofing compound complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Non-skid glazed ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:4 complete all as specified and as directed.

Vitrified ceramic tiles 10 mm thick dark shade (square or rectangular) polished area of each tile exceeding 0.36 sqm but not exc. 0.42 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:4 complete all as specified and as directed

Coloured Glazed ceramic tiles 300 x 200 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick bedding layer in cm 1:4 complete all as specified and directed..

Cleaning and removing all scale and dirt, etc, from tanks of capacity exc 250 litre and not exceeding 500 litre and from mouths of circulating pipes, etc complete all as specified and directed..

Cleaning and removing all scale and dirt, etc, from tanks of capacity exc 500 litre and not exceeding 1000 litre and from mouths of circulating pipes, etc complete all as specified and directed..

Cleaning and removing all scale and dirt, etc, from tanks of capacity exc 1000 litre and not exceeding 2000 litre and from mouths of circulating pipes, etc complete all as specified and directed..

Rotational moulded polythene water storage tanks Triple Layered of 500 ltr capacity (Cylindrical vertical with closed top) hoisted and fixed in position including dismantling/taking down and removing from site of Old water Tanks of any type complete all as specified and directed..

Rotational moulded polythene water storage tanks Triple Layered of 1000 ltr capacity (Cylindrical vertical with closed top) hoisted and fixed in position including dismantling/taking down and removing from site of Old water Tanks of any type complete all as specified and directed..

Supply and fix in repairs interlocking lath section formed from cold rolled steel strips 1.25mm thick and the section of the laths shall be continuous single piece without any welded joints and each automatic lock section shall be fitted with malleable cast iron or mild steel clips at either ends complete all as specified and directed.

Labour only for repairs and servicing of rolling shutters and removing of worn-out components such as hood cover laths ball bearings helical wire spring, lock plates, bracket, plates, shaft rod, laths, straightening of existing at required places including greasing and Refixing in the same location as directed by Engineer-in-Charge

Supply and fix in repairs interlocking lath section formed from cold rolled steel strips 1.00mm thick and the section of the laths shall be continuous single piece without any welded joints and each automatic lock section shall be fitted with malleable cast iron or mild steel clips at either ends complete all as specified and directed.

Supply only 450mm long helical wire spring of 7mm dia wire complete all as specified and directed.

Supply only 300 mm long helical wire spring of 6.40 mm dia wire complete all as specified and directed.

Supply only ball bearing of size 65mm (inner dia) complete all as specified and directed.

Supply only ball bearing of size 50mm (inner dia) complete all as specified and directed.

Supply and fix in repairs MS pipe medium grade of 40mm dia bore with necessary holes for shaft all as specified and as directed .

Supply and fix in repairs MS pipe medium grade of 50mm dia bore with necessary holes for shaft all as specified and as directed .

Supply and fix in repairs lock plate (width 125mm) made out of MS sheet 3.15mm thick welded with MS angle 35 x 35 x 3 mm at the bottom and shall be fitted with MS sliding door, interior and exterior sides of lock plates complete all as specified and directed.

Supply only gear mechanically operated system with spur wheel gear worn wheel and bevel gear box with handle for free movement of rolling shutters complete all as specified and directed.

Supply only MS hood cover of 1.00 mm thick sheet to the rolling shutter for various openings complete all as specified and directed.

Supply only MS guide channel of 3.15mm thick and 65 mm wide for rolling shutters as required at site complete all as specified and directed.

Preparation of newly plastered wall surfaces and applying three coats of white wash on walls complete all as specified and as directed .

Preparation of newly plastered wall surfaces and applying two coats of cement base paint on wall complete all as specified and as directed .

Preparation of ceiling surfaces and applying three coats of white wash on ceiling complete all as specified and as directed.

Preparation of New or previously untreated surfaces of plastered surfaces, of any description and girth, not otherwise described and applying cement based wall care putty on wall surface to achieve even and smooth surface and applying two coats of oil bound distemper over one coat of primer on walls complete all as specified and directed.

Complete removal of existing treatment and applying one coat of cement based wall care putty over two coat of distemper oil emulsion on surface of walls complete all as specified and directed.

Preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Preparing plastered or unplastered old decorated surfaces by brooming down or steel wire brushing and applying one coat of white wash on walls and cornices complete all as specified and directed.

Preparation of old decorated surfaces of ceiling by washing, rubbing down and stopping of painted surfaces and applying one coat ofwhite wash complete all as directed.

Preparation of old decorated surfaces of walls by washing, rubbing down and stopping of painted surfaces and applying one coat of colour wash complete all as directed.

Preparation of old decorated surfaces of walls by washing, rubbing down and stopping of painted surfaces and applying one coat of cement base paint complete all as directed.

Preparing old painted surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of oil emulsion distemper complete all as specified and directed.

Preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint complete all as specified and directed. .

Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Supply & fix in repairs curtain rods of aluminium annodised alloy fixed alongwith 2 Nos. of brackets complete all as specified and directed..

Applying two coats 100% premium acrylic exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 Lit/10 Sqm over old painted surfaces by washing, rubbing down and stopping of painted surfaces on walls complete all as specified and directed.

Writing letters or figures (Block, Roman, Italic or Indian) not exceeding 30 cm high complete all as specified and directed.

Dismantling chain link fencing wire mesh including MS line wires any type complete all as specified and directed..

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embeded portion and making good disturbed ground complete all as specified and directed..

Precast Reinforced cement concrete fencing posts of Type B1, 1:2:4 (using 20 mm graded crushed stone aggregate complete all as specified and directed.

4 mm dia M S galvanised PVC coated chain link fencing of 50mmX50mm mesh inculding line wires fixed with any of standards, rails, straining bolts, etc including provision of binding wires all as directed.

Mild steel work in hand rails, wind ties, posts and struts in fencing screwed or welded to shape as directed, including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe 290 Gde E-195 complete all as specified and directed.

S & F in repairs Galvanized, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins,complete all as specified and directed.

S/F in repairs Aluminium anodised doors, door frame of size 101.60x44.75x1.75mm thick, shutter style of 85x44.45x1.56 ,bottom rail of size 114.30x44.45x1.55 including aluminium beading, rubber/neoprene gasket, mortice lock, Aluminium round handles of dia 150mm on both sides, 200mm long tower bolts including double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box and main body with stainless steel cover and governing pivot made up of brass, other parts made up of mild steel heavy duty and including 5.5mm thick tinted glass at both pane including fittings and fixture complete all as specified and as directed by engr-in-charge.

S&F in repairs 19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber to timber frame work complete all as specified and directed.

S&F in repairs Continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30 mm in repairs complete all as specified and directed..

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

M/s SIRI CONSTRUCTIONS

ALLURI CONSTRUCTIONS

B RAMAKRISHNA

M/s Sai Venkata Durga Constructions