Providing Street light arrangement amd replacement of old damage Street light poles in 7 Nos Different community centers in Sector- 82,104,105,110, 92, 93 Super MIG, 93B, community centers Noida.

Supply & fixing of 6 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with Single arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P completee in all respect. PS NO. 647 Make- Bajaj, Valmont, Transrail

Numbering of Poles with combination of yellow and black colour paint etc complete in all respects as per direction of E/I (AOR) Page-46

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.(DSR-2018, 12.42)

S/F of 2.5 sq.mm x 3 core cable as per AOR

Supplying and laying of aluminium conductor PVC insulated armoured, served, sheathed cable 1100 Volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick sand alround and protected with burnt bricks on sides and on top of suitable size of as directed by the Engineer-Incharge, complete in all respects the armouring of the cable shall be properly connected with the earth conductor by clamps etc. PS.No. 501 a)- 16 sq. mm 4 core

b) 50 Sq.mm. 3.5 Core

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. PS No. 504 a) 16 sq. mm

b) 50 Sq.mm.

Supplying and laying of following size DWC HDPE pipe lSI marked along with all accessories like socket, bend, ouplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 em below ground level)including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required 90 mm dia (OD-90 mm & ID-76 mm nominal)D.S.R 14.16.2 Pg No-49

Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Complete in all respect as per direction of E/I. UPPWD-2018 PS - 725B