Constructoin of Shade, Feb rication work and Building repairing work In thaltej ward of North West Zone. (A.R.C.)

Name of Work:- Constructoin of Shade, Febrication work and Building repairing work In thaltej ward of North West Zone. (A.R.C.)

Sr.No Oty. Item Description Rate Unit Amt.Rs.

Excavation for foundation upto 1.5 m depth including sorting out and stacking of

1 useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose

1.a 50 Upto 1.5 mt Depth 201.81 Cmt

1.b 51 1.5 to 3.0 mt.depth 222.72 Cmt

Filling in foundation and plinth with murrum or selected soil in layers of 20cm. 286.20 Cmt

2 20 thickness including watering, ramming and consolidating etc. complete.

Providing and laying cement concrete1:5:10 (1-Cement: 5- coarses sand and:10- 2492.51 Cmt

3 10 hand broken stone aggregates 40mm nominal size) and curing complete excluding

cost of formworkin (A) Foundation and Plinth.

Providing and laying cement concrete1:4:8 (1-Cement: 2653.67 Cmt

4 5 4- coarses and:8 hand broken stoneaggregates 40mm nominal size) and curing

complete excluding cost of formworkin (A) Foundation and Plinth

Providing and laying cement concrete1:3:6 (1-Cement: 3- coarses sand and:6-hand 2976.00 Cmt

5 5 broken stone aggregates 40mm nominal size) and curing complete excluding cost of

formworkin (A) Foundation and Plinth.

Providing and laying cement concrete 1:3:6 (1-Cement:3-coarse sand:6-crushed 4006.15 Cmt

6 5 stone aggregates 20mm nominal size) and curing complete including cost of

formwork in (A) wall caps/coping

Providing and laying cement concrete work 1:2:4 ((1- Cement:2- coarse sand:4-

7 0 graded aggregates 20mm nominal size) curing complete excluding cost of formwork

and reinforcement.

7.a 5 Foundations, footings, base or columns and mass concrete 3923.53 Cmt

Slabs, landing, shelves, balconies, lintels, beams, girders 4012.47 Cmt

and cantilivers upto floor two level

7.c 5 Independent piers, columns, and pillars, upto floor two level 3661.30 Cmt

Provdg. & laying cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone 6487.07 Cu.M.

aggregates 20 mm nominal size) for reinforced concrete chhajjas not exceeding

cm. thickness upto floors two level including finishing the exposed surfaces with

cement mortar 1:3 (1 cement : 3 find sand) to give a smooth and even surface

centering and form work and curing complete excluding cost of reinforcement.

Providing and laying controlled cement concrete / Ready Mix Concrete of M-200

9 0 and curing complete, excluding the cost of form work and reinforcement for

reinforced concrete work in:

9.a 8 Foundations, footings, base of columns, and mass concrete. 3977.88 Cu.M.

9.b 11 Walls from top of foundations /level up to floor Two level. 4484.17 Cu.M.

Slabs,landing,shelves,Balconies Lintels, Beams, Girders and 4460.36 Cu.M.

Cantilever upto floor

9.d 8 Columns, pillars, posts, and struts, up to floor two level. 4558.20 Cu.M.

9.e 10 Staircase up to floor two level. (excluding landing) 5418.91 Cu.M.

9.k 13 Vertical and horizontal fins up to floor two level. 4701.97 Cu.M.

Providing and Laying ordinary cement concrete 1:2:4 (1-Cement 2-coarsesand: 4- 6241.78 Cum

graded stone aggregates 20 mm nominal size) and finishing smooth with curing etc.

10 2 complete including the cost of form work but excluding the cost of reinforsement

for R.C.C work in (iv) Slabs having more than 13 cm and upto 15 cm. thickness

Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2- coarse sand : 4-

graded stone aggregates 20 mm nominal size) exposed work with curing etc.

complete including the cost of formwork but excluding the cost of reinforsement for

11a 0 (i) Slabs upto 8cm thickness 9447.57 Cum

Brick work using common burnt clay building bricks having crushing strength not

12 0 less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement

: 5 -fine sand)(A) Modular

12.a 13 (A) Conventional 4011.66 Cmt

12.b 16 B) Modular 4345.02 Cmt

Extra Rate for brickwork in Above Item for super structure above plinth level upto

floor two level (B) Conventional

13.a 8 (A) Conventional 272.25 Cmt

13.b 8 B) Modular 262.35 Cmt

13.c 16 C) above floor two level Item No. 2(6.13) (A) Modular 42.66 Per Floor

13.d 16 D) above floor two level Item No. 2(6.13) (B) Conventional 40.09 Per Floor

Providing and laying in position Ready Mixed M250 grade concrete for reinforced 4853.56 Cmt

cement conctere work , using cement content as per approved Design Mix

manufactured in fully automatic batching plant and transported to site of work in

transit mixer for a lead up to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete

work including pumping of R.M.C. from transit mixer to site of laying, excluding

14 80 the cost of centering shuttering finishing and reinforcement including cost of

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting

of concrete, improve workability without impairing strength and durability as per

direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per

latest IS 456 shall be maintained) (Cement level 450 kg )

Half brick masonry in common brunt clay building bricks having crushing strength 583.49 Smt

15 16 not less than 35 Kg/Sq.Cm. in Cement mortar 1:5 ( 1-Cement : 5 coarse sand ) in

foundation and Plinth conventional brickwork

Extra for half brick masonry in super structure above plinth level upto floor two

16.b 8 (B) conventional 52.80 Smt

Providing form work in ordinary timber planking so as to give a rough finish

including centering, shuttering, strutting and propping etc. height of propping and

17 0 centering below supporting floor to celling not exceeding 4 M & removal of the

same for in situ reinforced or plain concrete work upto floor four level

Foundation, footings, bases of columns etc. and mass 171.68 Smt

(B) Flat surfaces such as soffits of supspened floors slabs Landings and the like. (1) 252.00 Smt

Floors etc. upto 200 mm in thickness.

(B) Flat surfaces such as soffits of suspended floor roof slabs Landings and the like. 270.90 Smt

(2) Floors etc. above 200mm in thickness.

Vertical surface such as walls (any thickness) partitions and the like including 229.95 Smt

attached buttresses & string course & the like.

(ii) Sides And Soffits Of Beam, Haunchings Cantilevers, Girders, Bressumers And 192.15 Smt

Lintels Not Exceeding 1 M In Depth.

(G) Columns PillarsPosts and struts. (1) Square Rectangular 297.68 Smt

Polygonal in plan.

17.g 68 (2) Circular or curved in plan. 422.10 Smt

(H) (2) Sides and soffits of Beams Beam Haunchings canti-levers Girders 259.88 Smt

Bressumers and Lintels exceeding 1M.in Depth.

Providing and fixing 35 mm thick panelled, glazed or panelled and glazed shutters

for Doors windows and clear story windows including anodised alluminium But

hinges with necessary screws and indian teak wood shutters with.

a 7 (A) Plywood sheet panels. 3459.09 Smt

b 6 (B) Particle board panels 3464.51 Smt

c 3 (C)Hard board panels. 3433.65 Smt

d 3 (D) Asbestos sheet panels. 3406.53 Smt

Providing and fixing 25 mm thick shutters for cup boards etc. including black 3006.75 Smt

19 3 enamelled M.S. butt hinges with necessary screws.(A) Indian teak wood. (i) Fully

Providing and fixing 25 mm thick shutters for cupboards etc. including anodised 3006.75 Smt

a 3 alluminiu butt hinges with necessary screws. (A) Indian teak wood. (ii) Fully

Providing and fixing 25 mm thick shutters for cupboards etc. including anodised 2814.42 Smt

b 5 alluminiu butt hinges with necessary screws.

(A) Indian teak wood. (ii) Partly panelled and partl glazed.

Providing and fixing glazed louvered glass windows and ventilators with teak wood 4102.54 Smt

20 5 frame 10 cm. x 7 cm. size including 3 coats of oil painting to wood work

Providing and fixing glazed louvered glass windows and ventilators with teak wood 4332.47 Smt

21 5 frame 10 cm.x7 cm. size including 3 coats of oil painting to wood work

etc.complete.with wooden louvers plank 12mm thick

Providing and fixing 35 mm thick shutters for Doors, windows and clere story 4595.06 Smt

windows including Indian teak wood frames 10 cm x 7 cm. size including anodized

22 10 alluminium fixtures and fastenings including primer coat of approved quality and

two coats of oil painting etc, complete.(ii) Fully Glazed.

Providing and fixing 35 mm thick shutters for Doors, windows and clere story 5285.45 Smt

windows including Indian teak wood frames 10 cm x 7 cm. size including black

23 5 enamelled iron oxidixed fixtures and fastenings including primer coat of approved

quality and two coats of oil painting etc, complete.(ii) Fully Panelled.

Providing and fixing 35 mm thick shutters for Doors, windows and clerestory 4940.25 Smt

windows including Indian teak wood frames 10 cm x 7 cm. size including anodized

a 5 alluminium fixtures and fastenings including primer coat of approved quality and

two coats of oil painting etc, complete. (iii) Partly panelled and partly glazed.

Providing and fixing 30 mm thick FACTORY MADE SOLID PANEL PVC DOOR 1135.02 Smt

SHUTTER consisting of frame made out of M.S.tubes of 19 gauge thickness and

size of 19 mm x 19 mm for stiles and 15 mm x 15 mm for top and bottom rails.M.S.

frames hall have a coat of steel primers of approved make and manufacture, M.S.

frames hall be covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 x

50 mm formings tiles, and 5 mm thick 75 mm wide PVC sheets for to prail, lock rail

and bottom rail on either side, and 10 mm (5 mm x 2) thick,

24 8 20 mm wide cross PVC sheet as gap insert for top rail and bottom rail, Panelling of

5 stiles and rails with 30 mm wide x 5 mm thick PVC sheet beading on eighter side,

and joined together with solventcement adhesive,. An additional 5 mm thick PVC

strip of 20 mm width is to be stculkon the interiors side of the ‘c’ channel using

PVC solvent cement adhesive etc. complete as per direction of Engineer incharge,

manufacture’s specification and drawing.

Providing and fixing in position collapsible steel shutters with vertical channels 20 x 5391.23 Sq.M.

10 x 2 mm braced with flat iron diagonal 20 x 5 mm size with top and bottom rails

25 7 T iron 40 x 40 x 6 mm with 38 mm dia steel pulleys complete with bolts, nuts,

locking arrangements, stoppers, handles, including a priming coat of red lead paint

& approved make.

Providing and fixing 1 mm thick M.S. sheet sliding shutters with frame and 3652.12 Sqm

diagonal braces of 40x40x6 mm angle iron, 3.15 mm M.S.gusset plates at Junctions

and corners 25 mm dia. pulley, 40x40x6 mm angle and T-iron guide rail at top and

bottom respactively with handles, stoppers and locking agangement etc, including

applying a priming coat of red lead paint.

Providing & Fixing in position Alluminium doors with frame using approved 2900.00 Smt

quality anodised extruded alluminium section as approved by Engg.in charge(Jindal

alluminium) (a) Frame sections 101.6x44.45 mm (b) Shutter bottom vertical & top

section 83.5x44.45 (wt.1.31 kg/mt.)(at 1.31 kg/mt) (c) Shutter bottom section at

27 33 114.3x44.45 mm at (1.37kg/mt) Shutter middle section at 100x44.3 wt.(1.37 kg/mt)

incl.providing & installing 5 mm thick approved color Acrylic sheet of standard

quality fixed with glazing chips on upper pannel & Laminated sheet on lower

pannel (wtt.0.13 kg/Rmt) etc.comp.as direction of engg.in charge.(N.S.)

Providing and fixing extruded aluminum window having extruded aluminum Colour 2119.14 Sq. M.

r Powder Coated section frame main outer size 127mm x 38.10mm x 1.35mm ,@

Wt.1.384 Kg/mt,horizontal Four track member size 122.20mm x 31.75mm x

1.10mm @ Wt. 1.205 Kg/mt,vertical member of size 122.20mm x 31.75mm x

1.50mm ,@ Wt. 1.398 Kg/mt with sliding shutters of horizontal member size 40mm

28 8 x 18mm x 1.29mm @ wt.of 0.456Kg/mt,vertical member of size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt,@ with 5 mm thick transparent bronze colour tinted

float glass with powder coated aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc complete for window.

Providing & Fixing in position Alluminium vents with frame using approved 1950.00 Sq. M.

anodised extruded alluminium section as approved by Engg. In charge.(Jindal

29 8 alluminium) units equivalent Approved Rate)Frame section of 63.50 x 38.50 mm.

(wt. 0.68Kg/Rmt) incl. Providing & Installing 5 mmthick approved color Acrylic

sheet of standard quality etc. comp.

Providing and fixing standared extruded of alluminium section of size 63 mmx38.10 1163.92 Sq. M.

mmx1.2 mm (Jindal Section:2434, or equivalent @ Wt.0.643 Kg/mt) with colour

anodized alluminium frame for ventilation with 5 mm thick frosted glass as details

etc complete for Ventilation

Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 2141.88 Sq.M.

x 1.95 mm,@ Wt 1.094Kg / Rmt with colour Powder Coated alluminium frame with

31 8 5 mm thick transparent bronze colour tinted float glass as details etc complete for

Providing and laying 40 mm thick marble chips flooring rubbed and polished 811.13 Sqm

(I.E.terrazo) to granolithic finish with under layer 30 mm thick cement

concrete1:2:4 (1-Cement: 2-coarse sand: 4-graded stone aggregate 10 mm and down

gauge) and to player 10 mm thick with white, black or white and blak marble cihps

32 16 of required sizes from 1 mm to 4 mm nominal size laid in cement marble powder

mix 3:1 (3- Cement:1-Marble powder by weight) in proportion of 4:7 (4- Cement: 7-

marble chips by volume) (C) Medium Shade pigment with approx 50% white

cement and 50% ordinary cement (In top layer only) (upto 10 ton)

Providing and laying marble chips skirting (Terrazo) or dedo rubbed, and polished 869.40 Sqm

to Granolithic finish to player 6 mm white, black or white and black marble chips of

size from smallest to 4 mm nominal size laid in cement marble powder mix 3:1 (3-

Cement: 1 marble powder by weight) in proportion of 4:7 (4-cement marble powder

mix: 7-marble chips by volume) (B) Light shade pigment with white cement (In top

Providing and laying white glazed tiles 6mm thick in flooring treads of steps and 908.17 Sq.M.

34 73 landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand )

finishing with flush

Providing and laying Ceramic tiles 6 mm thick in flooring treads of steps and 960.47 Sq.M.

35 49 landing laid on a bed of 12 mm thick cement mortar 1:3 (1- cement :3-coarses and)

finishing with flush pointing in white cement.

Providing & Fixing 20 mm thick Mirror Polished Decorative Granite Board with 4304.00 No.

Computerised Golden Letters Discription as per instructions of engg. in charge to

M.S. frame structure for Inaugaration & Public Handover Function (N.S.)

Providing and laying Vitrified tiles 8 to 10 mm thick, 36''x36'' in flooring treads of 1469.91 Sq.M.

37 36 steps and landing laid on a bed of 12 mm thick cement mortar 1:3 (1-cement:3-

coarses and) finishing with flush pointing inwhite cement.

Providing and laying Vitrified tiles 8 to 10 mm thick, 24''x24'' in skrting risers of 1130.15 Sqm

38 29 steps and dedo on 10 mm thick cement plaster 1:3 (1- cement: 3-coarse sand) and

jointed with white cement slurry

Providing and laying Vitrified tiles 8 to 10 mm thick, in skrting risers of steps and 1523.61 Sqm

39 41 dedo on 10 mm thick cement plaster 1:3 (1-cement:3- coarse sand) and jointed with

white cement slurry

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of 1062.50 Sq. M.

40 41 steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1- cement : 3-

coarse sand ) finishing with flush pointing in white cement.

Providing and laying 24" x 24" vitrified 8 to 10 mm th.Double Charged Gloosy / 165.00 Rmt

Matt tiles of Approved make as Approved by Adl.C.E. / Consultants for upto 10 cm

high skirting as approved by Engineer in charge over 10 mm thick cement mortar

1:6 (1 cement : 6 coarse sand)on new surface& jointed with colour cement slurry

incl with flush pointing & cleaning the surface etc. comp.

Providing and laying polished Kota stone slab flooring over 20 mm (Average) thick 982.83 Sq.M.

base of cement mortar 1:6 (1-cement:6-coarses and) or L.M.1.1.5 (1-Lime putty:1.5-

42 70 coarses and) laid over and jointed with grey cement slurry mixed with pigment to

match the shade of slab including rubbing and polishing etc. complete. (A) 25 mm

Providing and laying marble stone slab flooring over 20mm (average)base of cement 2194.63 Sq.M.

mortar 1:6 (1-cement : 6 coarse sand) or L.M. 1:1.5(1- lime putty : 1.5 - coarse

43 8 sand) laid and jointed with gray cement slurry including rubbing and polishing

(A) Marble slab 25mm thick

Providing and laying polished Kota stone slab flooring over 20 mm (Average) thick 1085.48 Sq.M.

base of cement mortar 1:6 (1-cement:6-coarses and) or L.M.1.1.5 laid over and

jointed with grey cement slurry including rubbing and polishing etc.complete. (B)

Providing and laying polished kota stone slab 25 mm thick in risers of steps, 1176.03 Sq.M.

skirting Dedo and pillars laid on 10 mm thick cement mortar 1:3 (1-Cement :3

45 16 coarses and) and jointed with gray cement slury mixed with pigment to match the

shade of slab including rubbing and polishing etc.complete.

Providing and laying cement concrete flooring 1:2:4 (1-cement: 2-coarses and:4- 297.68 Sq.M.

46 8 graded stone aggregate 20mm nominal size) laid in one layer and finished with a

floating coat of neat cement. (A) 40mm thick.

Providing and laying cement concrete flooring 1:2:4 (1-cement: 2-coarse sand:4- 348.08 Sq.M.

47 8 graded stone aggregate 20mm nominal size) laid in one layer and finished with a

floating coat of neat cement. (B) 50mm thick.

Providing and laying broken china mosaic flooring for terrace using 12 mm to 20 739.89 Sqm

mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope

and to be tempered to bring mortar creme out upto surface using white cement

including rounding off junctions and extending them up to15 cm along the wall,

clearing with water and oxalic acid etc.as directed.

Providing and laying coloured glazed tiles of the size 300 mmx200 mmx8 mm/300 1426.95 Sqm

mmx450 mmx8 mm in skirting, risers of steps and dedo on 10 mm. thick cement

plaster 1:3 (1cement: 3 coarse sand) & jointed with white cement slurry.

Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L 719.93 Sqm

Hooks, Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer or G.I.

limpet washer. filled with white lead complete excluding the cost of purlins, Rafters

and Trusses.(1) 0.80 mm thick sheet

Providing and fixing 150 mm wide 450 mm over all semi circular plain G.I.sheet 555.71 Sqm

class-3 gutter with Iron brackets 40 mmx3 mm size Bolts, Nuts, washers etc.

including making necessary connection with rain water pipes. (i) 0.80 mm thick

Providing and fixing five courses water profing treatment with bitumen felt 466.84 Sqm

consisting of second and fourth course of blown/ bitumen or/and residual bitumen

applied hot at 1.2 kg.per Sq.M.of area for each course and first course with fibre

base bitunen saturated under lay type land third course with fibre base self finished

felt type 2 grade 1 and fifth and final course of stone grit 6 mm and down size or

pea sizes gravel spread at 0.008 Cu.Metre/Sq.metre preparation of surface excluding

grading complete.

Providing and fixing on wall face C.I. Rain water pipe including filling the joints 283.62 Rmt

53 2 with spun yarn soaked in neat cement slurry and cement mortar 1:2(1- Cement : 2-

fine sand) (A) 75 mm dia.

Providing 15 mm thick cement plaster in single coat on Rough (Similar) side of 174.83 Sqm

single or half brick walls for interior plastering up to floor two level and finished

even and smooth in (i) Cement mortar 1:3 (1-cement :3-sand)

Providing 20 mm thick sand faced cement plaster on walls upto height 10 metres 297.68 Sqm

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement :

3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc.

Colour washing with lime on wall surface (two coats) over and including a primary 12.29 Sqm

coat of white washing to give an even shade after through brooming the surface to

remove all dirt, dust, mortar drops and other foreigh matter.

Removing dry or oil bound distemper by a washing and scraping and sand papering 11.19 Sqm

57 16 the wall surface smooth including necessary repairs to scratches complete.

Distempering with dry distemper of approved brand and manufacture (two coats) 46.94 Sqm

and of required shade on wall surfaces of given an even shade, over and including a

priming coat of whiting after thoroughly brooming the surface free from mortar

dropping and other foreign matter.

Distempeing (Two coats) with oil bound distemper of approved brand and 76.08 Sqm

manufacture and of required shade on wall surfaces to give an even shade, over and

including a priming coat with distemper primer of approved brand and manufacture

after thoroughly brushing the surface

free from mortar dropping and other foreign matter and also including preparing the

surface even and sand papered smooth.

Extra Coat for Above Item over above for every subsequent coat of approved brand 30.09 Sqm

and manufacture.

Wall painting (two coats) with plastic emulsion paint of approved brand and 78.44 Sqm

manufacture on undecorated wall surface to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter and sand

papered smooth.

Extra over item for every sub sequent coat of wall painting 33.39 Sqm

with plastic emulsion paint of approved brand

Applying priming coat over new steel and other metel surface after and including 34.34 Sqm

preparing the surface by throughly cleaning, oil, grease, dirt and other foreign matter

63 325.51 and scoured with brushes fine steel wood, scrapers and sand paper with ready mixed

priming paint brushing red lead.

Painting two coats (excluding priming coat) on new steel and other metal surface 86.94 Sqm

with enamel paint, brushing, interior to give an even shade including cleaning the

surface an even shade including cleaning the surface of all dirt, dust and other

foreign matter.

Painting one coats (excluding priming coat) on previously painted steel and other 54.35 Sqm

metal surface with enamel paint, brushing to give an even shade including cleaning

the surface of all dirt, dust and other foreign matter.

66 41 Extra over item for every sub sequent coat of paint. 50.40 Sqm

Painting two coats (excluding priming coat) on new steel and other metal surface 64.66 Sqm

67 16 with synthetic enamel paint, brushing to give an even shade including cleaning the

surfaceofalldirt,dust and other foreign matter.

Painting one coats (excluding priming coat) on previously printed steel and other 43.79 Sqm

metal surface with synthetic enamel paint, brushing to give an even shade including

cleaning the surface of all dirt, dust and other foreign matter.

69 8 Extra over Above item for every sub sequent coat of paint. 43.47 Sqm

Painting two coats (excluding priming coat) on external surface of new rain water, 20.16 Sqm

soil, waste and vent pipes and fittings with ready mixed bituminous brushing, black,

anti corrosive to give an even shade including cleaning of all dirt, dustand other

foreign matter.(75 mm dia)

Painting two coats (excluding priming coat) on external surface of new rain water, 25.05 Sqm

soil, waste and vent pipes and fittings with ready mixed bituminous brushing, black,

anti corrosive to give an even shade including cleaning of all dirt, dust and other

foreign matter.(100 mm dia)

Painting two coats (excluding priming coat) on new wood and wood based surface 26.78 Sqm

with enamel paint, interior to give an even shade including cleaning the surface of

72 81 all dirt, dust and other foreign matter sand papering and stopping. (a) Ready mixed

paint brushing wood primier pink.

Painting one coats (excluding priming coat) on previously painted wood and wood 26.78 Sqm

based surface with enamel paint, to give an even shade including cleaning the of all

dirt, dust and other foreign matter.(b) Ready mixed paintbrushing priming for

74 8 Extra over Above item for every sub sequent coat of paint. 24.26 Sqm

Painting two coats (excluding priming coat) on new wood and wood based surface 104.12 Sqm

with ready mixed paint, brushing, oil, gloss, semi gloss to give and even shade

including cleaning of all dust, dirt and other foreign matters and papering and

Finishing wall with weather proof exterior emulsion paint on wall surface (two 113.40 Sqm

coats) to give an required shape even shade after thoroughly brushing the surface to

remove all dirt, and remains of loose powdered materials.etc complete

Applying two coats of Birla (white cement based) or Asian (acryliclapy-putty) or 40.19 Sqm

equivalent & two coats of primer of approved brand and manufacture on new wall

77 57 surface to give an even shade including thoroughly brushing the surface free from

mortar dropping and other foreign matter and sand papered smooth.

Painting one coats (excluding priming coat) on previously painted wood and wood 55.13 Sq.M.

78 65 based surface with enamel paint, to give an even shade including cleaning the of all

dirt, dust and other foreign matter.

Writing letter or figures on any surface with black japan paint (stops, comas, 3.15 per letter

79 81 hyphens and the like not to be measured and paid for separately) (i) Block per

(Letters/Figures) (Per 10 Letter pet CM.HT) Cm/Ht

Demolition including stacking of serviceable materilas and disposal of 1047.38 Cu.M.

unserviceable materials with all lead and lift. (i) R.C.C. work

Demolition of Brick work and stone masonry including stacking of serviceable 544.95 Cu.M.

81 24 materil as and disposalof unserviceable materials with all lead and lift.(ii) In Cement

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable 47.25 Sqm

82 33 materil as and disposal of unserviceable materials with all lead and lift.

Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. stacking 47.25 Sqm

83 2 of serviceable materil as and disposal of unserviceable materials with all lead and

lift.(i) G.I.sheet roofing.

Dismentling steel work including distempering and 2.42 Kg.

stacking the materials with all lead and lift.

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including 185.85 Each

chowkhats architraves, hold fasts and other attachment etc. complete and stacking

the material within all lead and lift.(i) Not exceeding 3 Sq.M. in area.

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including 248.85 Each

chowkhats architraves,hold fasts and other attachment etc. complete and stacking

the material with in all lead and lift.(ii) Exceeding 3 Sq.M.in area.

Dismentling barbed wire in fencing including making rolls and also including 66.15 Rmt

dismentling fencing posts including all earth work concrete in base and making

87 49 good the disturbed ground stacking useful materials as directed and disposing as

directed and disposing of the unserviceable materials with all lead and lift.

Dismentling C.I. pipes G.S.W. pipes abd A.C. rain water pipes with fittings and 74.03 Rmt

88 49 clamps including stacking the materials with all lead and lift (for any dia, of pipe)

Dismantling santtary fittings like wash basin . W.C. pan Indian and Europe an type, 401.63 Each

89 46 flushing tank etc. including stacking the materials with all lead and lift

Scraping oil paint from steel and other metal surface and making the surface even 48.83 Smt

(with Hand Scraping.)

Removing and scraping of old deteriorated plaster of any thickness from wall / 19.38 Smt

91 8 R.C.C member including stacking of serviceable material and disposal of

unserviceable from site of work with all lead and lift

Providing and fixing M.S. fan clamps of shape and size as specified in existing 168.53 Each

R.C.C. slab including cutting chase and making good.

Cutting out cracks of roof terrace to V-section, cleaning out, wetting, grouting with 64.58 Rmt

cement and sand slurry 1:3 (1-cement 3-sand )

Cutting out cracks roof terrace to V-Section cleaning out and 75.29 Rmt

94 8 filling solidly with a hot mixture of bitumen and clean dry sand (1:1 by weight)

Providing & Fixing in position Alluminium doors with frame using approved 2900.00 Sq. M.

quality anodised extruded alluminium section as approved by Engg.in charge(Jindal

alluminium)(a) Frame sections 101.6x44.45 mm (b) Shutter bottom vertical & top

section 83.5x44.45 (wt.1.31 kg/mt.)(at 1.31 kg/mt) (c) Shutter bottom section at

95 5 114.3x44.45 mm at (1.37 kg/mt) Shutter middle section at 100x44.3 wt.(1.37

kg/mt) incl.providing & installing 5 mm thick approved color Acrylic sheet of

standard quality fixed with glazing chips on upper pannel & Laminated sheet on

lower pannel (wtt.0.13 kg/Rmt) etc.comp.as direction of engg.in charge.(N.S.)

Providing & Fixing in position Fully Panelled / Partly Panelled Partly Glazed / Fully 4583.00 Sq.M.

Glazed Alluminium doors with frame using approved quality anodised extruded

alluminium section as approved by Engg. In charge.(Jindal alluminium )(a) Frame

sections 101.6x44.45 mm b) Shutter vertical & top section 83.5x44.45 (wt.

kg/mt.)( at 1.31 kg/mt) © Shutter bottom section at 114.3 x44.45mm at ( 1.37 kg/mt

) Shutter middle section at 100x44.3 wt. (1.37 kg/mt ) incl. providing & installing

mm thick Glass of standaed quality fixed / 12 mm thick Laminated sheet with

glazing chips (wt. 0.13 kg/ Rmt) in panels etc. comp. as per Detail Given &

direction of engg.in charge.

Providing & Fixing in position Alluminium window 2/3/4 track sliding / fix type 4518.00 Sq. M.

with frame using approved anodised extruded alluminium section as approved by

97 5 Engg. In charge.(Jindal alluminium) units equivalent. including P/F installing 5 mm

thick clear/tinted Glass of standard quality etc.comp.

Providing & Fixing in position Alluminium vents with frame using approved 4218.00 Sq. M.

anodised extruded alluminium section as approved by Engg. In charge.(Jindal

98 7 alluminium) units equivalent Frame section of 63.50 x 38.50 mm. (wt.0.68 Kg/Rmt)

incl. Providing & Installing 5 mm thick Glass of standard quality etc. comp.

Providing and fixing of Ridge flashing for roof panel shall be made out of 0.5 mm 510.10 Sqm

thick pre coated GI sheet. The Pre coatedsheet shall be of minimum 240 mpa steel

grade confirming to IS 14246:1995 and shall have zinc coating of minimum

gsm as per IS:277:1992, 5-7 microns epoxy primer on both side of the sheet and

99 3 polyester top coat 15-18 micron. The PP GI Sheet shall have plastic protective guard

film of minimum 25 microns to avoid scratches during transportation. The ridge

shall be fixed to the steel members by poprivetor self drilling/self stitching fastners

@ maximum 450mm c/c along length of capping/flashing etc complete .

Supplying and fixing vinyl flooring over the surface having 1- 2 mm thickness as 963.00 Smt

per directed by engineer incharge etc as completed (N.S.)

Providing and laying 15mm bamboza wooden flooring as per architect's drawing 2690.00 Smt

with all necessary details as directed by the project consultants. Use underlay for

better result as per Detail specifications and directed by the project consultants.

(N.S.) Approved Rate )

Providing and fixing 1.20 Metre high fencing with 2.0 Metre long M.S. Angle posts 385.40 Rmt

40 mm x 40 mm x 6 mm and oil painting 3 coats fixed at 2.5 Mt, C/c. with five

Horizontan lines and two diagonals of galvanised steel barbed wire weighting

Kg. per 100 Metre, strained and fixed to posts with G.I, staples including fixing the

posts in ground with 0.5 M x 0.5.M x 0.5 M. block in C.C 1:5:10 etc complete.

Renovation and Repairing work in Chainlink fencing any size and also refixing 735.00 Rmt.

103 5 work incl. febrication work with all materails to be painted one coat of primer and

twocoats of paint as directed inline and level. (N.S.)

Constructing a sink (chowkedi) with C.C. 1:2:4, 12 cm. thick over B.B. masonry in 2235.66 Rmt

C.M, (1:6) in front and dwarf wall 1.0 Mt. high and 23 cm. thick cement plaster to

masonry / in C.M.1:3) and cement concrete flooring in 1:2:4: mix 5cm.dia.drain

pipe etc.complete.

Constructing a cooking platform 60 cm. width and 70 cm high resting on B.B. 933.98 Rmt

Masonry walls 23 cm. thick in C.M. (1:6) with

105 8 (i) Fixing or precast R.C.C. 1:2:4) 8 cm. thick slab with marble chips set in C.M.

(1:6) (6 mm thick terrazo) with plastering on exposed faces walls in C.M. (1:4) etc

Extra rate for using Ready Mix Concrete of any grade for below ground level to 760.00 Cmt

vertical upto any floor with delivery & suction Pipe & Pump etc. The rate includes

106 5 fule, pump operator, skilled labor, driver etc completed and as per direction

of engineer in charge

P/A Tremix with dewartering machine and floater machine on constructed CC work 54.00 Sq.M.

for finishing the surface as per requirement. The rate including all machinaries,

labor, loading, unloading, transportaion etc complete as per direction given by

engineer incharge.

Carrying out timber treatment to all wood work including drilling holes and 54.98 Smt

spraying oil based chemical solution on surface of timber work for termite control

including labor and material etc. complete. Using Chlorpyriphos20 EC as per

2013 Part III (1% concentration by mass) is recommended one litre chemical

108 8 emulsion diluted with 19 liters of kerosene. Total diluted concentration will be

liters inclusive of 1 liter chemical emulsion application in drilled holes and 0.75 /

Litre chemical per one Sqmt two coat on wood surface not protected by paint or

Applying general insecticide pest control treatment to floors, cupboards etc 88.40 Smt

including labour materials etc. complete. Using Imidacloprid 30.5 SCas Per IS

109 8 part -II( (0.075% concentration by mass) is recommended 10.5ml chemical diluted

with 5 liters of water application 0.5 litre chemical /Sqm of surface is recommended

Carring out plinth treatment to post construction / existing structure by spraying 104.90 Smt

chemical solution for termite control treatment including labour and material consist

ment with I.S. specification. Using Chlordene and Chior purfiles 20 EC. As Per

6131_paret-II Consentration Weight on percentis recommended i.e one litre 20 EC

chemical emulsion with 19 liter give 1% concrentration inclusive of one litre

chemical emulsion appication attherate of 5 Litre chemical / Sqm of surface is

recommended as per I.S

Carrying out wall treatment for termite control including spraying with chemical 37.34 Smt

solution in oil base including labour and material Using Chlorpyriphos 20 ECAs per

IS 6313 part - II (1% concentration by mass) is recommended i.e one litre chemical

111 5 emulsion diluted with 19 liter oil base. Total solution will be 20 liters inclusive of

one liter chemical emulsion application at the rate of 7.5 litre chemical / Sqm of

surface is recommended as per I.S.S

Providing erecting and fixing double coated Syntex or equivalent PVC.(ISI) water 3.91 Litre

112 8 tank of required capacity each with all necessary fittings and connection etc.

complete on terrace.

Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes (Medium

113 0 grade) of the following nominal bore, tube fitting and clamps including making

good the wall ceiling and floor.

Providing and laying in trenches galvanised mild steel tubes (Midium grade) of the

following nominal bore, and tube fitting (Earth work in trenches to be measured and

paid for separately)

Making connection of galvanised Mild steel distribution branch with galvanised 600.08 Each

115 8 mild steel main 50 mm to 80 mm nominal bore by providing and fixing tee

including cutting and threading the pipes complete.

Providing and fixing to wall ceiling and floor 6.0 Kg.F/Cm2 working pressure

poluthene pipes of the following out side Dia. Low densidy, complete with special

falnge compression type fittings,wall clips etc.including making good the wall

ceiling and floor.

Providing and fixing to wall ceiling and floor 10.0Kg.F/Cm2 working pressure

polythene pipes of the following out side Dia. Low densidy, complete with special

falnge compression type fittings, wall clips etc. including making good the wall

ceiling and floor.

Providing and fixing cast iron (Spun) Nahni trap of the following nominal diameter 600.08 Each

of self cleaning design with C.I. screaed down or higned grating including cost of

cutting and making good the walls and floor 100 mm inlet and 50 mm

outlet.(C)100mm dia.

Providing and fixing water closet squatting Pan (Indian type W.C.Pan) size 580 mm 926.10 Each

(Earth work, bed concrete, foot rest and trap to be measured and paid for separately)

(A) Vitreous China. (I)Long pattern = White colour

Provdg. & fixing wall mounted White / Color Vitreous China European water closet 4250.00 No.

with integral P trap of "Cera" - Clair Series or equivalent incl. seat cover , Chair

Bracket etc. complete as per direction of engg. In charge.(N.S.)

Provdg. & Fixing Flat Back Large Urinal of White/ colour of "Cera" or " Hindware" 1850.00 No.

121 10 incl. C.P. Brass waste coupline , waste pipe, pvcconnection etc. Complete.( size

Providing & Fixing Angle cock of " Ess Ess" - Trend series or equivalent standard 675.00 No.

make as approved by engg. In charge all complete. (N.S.)

Providing and fixing 100 mm size P or S trap for water closet squatting pan 311.85 Each

123 16 including jointing the trap with the pan and soil pipe in cement Mortar1:1 (1-

Cement : 1-Fine sand)(A) Vitreous China.

Providing and fixing 600 mm x 450 mm bevelled edge mirrror of superior glass 825.48 Each

124 24 mounted on 6 mm thick A.C. sheet or ply wood sheet and fixing to wooden pluge

with C.P. brass screws and washers.

Providing and fixing chromium plated brass halftrun flush cock of approved quality

including fixing in pipe line etc. complete.

Provdg. & fixing White / Color Vitreous china Counter wash basin with signle hole 2950.00 No.

for pillar tap of "Cera " - Concord series of 550 x425 mm size to be fiited in stone

counter with necessary brackets painted white incl. cutting holes and making good

126 16 the same .Cost Includes P/F C.P. brass waste coupline, 32 mm dia fisher union

mm dia. Pillar cock & Angle cock of " Ess Ess"- Trend series ,32 mm dia. Waste

pipe etc. complete as per dir. of engg. in charge.

Providing & Fixing S.S.304 Grade Sink of Nirali / Krishna or Equivalent Make for 4650.00 No.

127 8 Kitchen Platform of size : 24":x18" as per Direction of engg. In charge

Providing and fixing C.P. brass towel rail comlete with C.P.brass brackets fixed to 597.22 Each

wooden plugs with C.P. brass scews.(B) 600mm x 20mm size.

Providing and fixing 600 mmx120 mm glass shelf with C.P. brass bracket and guard 561.03 Each

rail complete mixed to wooden plug with C.P.brass screws.

130 8 Providing and fixing toilet paper holder. (A) C.P.Brass 414.53 Each

Providing and fixing screw down bib taps of following size. (A)

Brass screw down bib tap polished bright.

20 (i) 15mm dia. 184.98 Each

16 (ii) 20mm dia. 212.68 Each

Providing and fixing screw down bib taps of following size. (B)

Brass chromium plated screws down Bib Tap.

24 (i) 15mm dia. 184.98 Each

16 (ii) 20mm dia. 212.68 Each

Providing and fixing screw down bib taps of following size. ©

Gun metal screw down bib tap.

41 (i) 15mm dia. 157.29 Each

24 (ii) 20mm dia. 176.09 Each

Providing and fixing pillar tap, capstan head, screw down

high pressure with screws, shanks and back nuts.

33 (i) 15mm dia. 305.67 Each

24 (ii) 20mm dia. 351.18 Each

Providing and fixing Gun metal check or non-return fullway

16 (i) 15mm dia. 184.98 Each

13 (ii) 20mm dia. 201.80 Each

24 (III) 25 MM DIA 416.47 Each

20 (E) 40mm dia 656.86 Each

Providing and fixing chromium plated brass half trun flush cock of approved quality

including fixing in pipe line etc. complete.

24 (i) 20mm dia. 252.26 Each

16 (ii) 25mm dia. 261.16 Each

13 (iii) 32mm dia. 273.03 Each

Providing and fixing chromium plated, bottle trap with necessary couplings of 292.87 Each

approved quality for wash basin.

Providing and fixing ball cock ofapproved quality as directed. 131.57 Each

(A) Copper Metal (i) 25mm dia.

Providing and fixing ball cock of approved quality as 101.89 Each

directed. (B)Abonite (i) 25mm dia.

Filling with good Quality thor as and where directed by the Architect / Engineer-in- 3850.00 Cmt

charge, in sunk in layers of 15 cm. thickness, including watering, ramming well etc.

complete, as directed by the Architect / Engineer-in-charge .

Providing laying and jointing in true line and level 15 mm dia. 71.93 Rmt

U.P.V.C. Pipe (SCH-40) for cold water including fittings make PRINCE/

SUPREME/ ASTRAL/ FINOLEX or equivalent as approved by Engineer In Charge.

145 57 Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with solvent, including cost of all

materials.adhesive

Providing laying and jointing in true line and level 25 mm dia. 90.93 Rmt

U.P.V.C. Pipe (SCH-40) for cold water including fittings make PRINCE/

SUPREME/ ASTRAL/ FINOLEX orequivalent as approved by Engineer In Charge.

146 24 Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 32 mm dia. 117.97 Rmt

U.P.V.C. Pipe (SCH-40) for cold water including fittings make PRINCE/

SUPREME/ ASTRAL/ FINOLEX or equivalent as approved by Engineer In Charge.

147 24 Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 40 mm dia. 146.65 Rmt

U.P.V.C. Pipe (SCH-40) for cold water including fittings make PRINCE/

SUPREME/ ASTRAL/ FINOLEX or equivalent as approved by Engineer In Charge.

148 16 Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 50 mm dia. 193.73 Rmt

U.P.V.C. Pipe (SCH-40) for cold water including fittings make PRINCE/

SUPREME/ ASTRAL/ FINOLEX or equivalent as approved by Engineer In Charge.

151 16 Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent, including cost of all

Providing in line level plumb, fabricating and fixing three row horizontal barbed 390.00 Rmt

wire fencing and punched tape concertina coil of 9 turns per meter of 610 mm dia

fixed with clips on top of the angle iron posts. The punched tape concertina coil

having sharp barbs at every 25 mm spacing shall be 0.5 mm thick and 19 mm width

and weighting 13 kg/100 mt. (Average) as per manufacture's specification. The rate

shall also include providing and fixing 1.20 mt.total long MS angle 40 x 40 x 6 mm

@3.00 mt.c/c spacing embaded in RCC column, angle posts shall be painted with

one coats of red oxide and two coats of enamel paint of approved quality at top

Fixing sun film for protection sunlight in black or any colour as as 850.00 Smt

directd by engineer In Charge.(Market rate)

Providing & Fixing 3 mm thick F.R.P.sheet of Approved Quality & Color / Pattern 1930.00 SqM

as per Consultant's design also includes required fabrication structure in the grid of

2'-0x2'-0 size using hollow pipe of16 gauge & size 2"x1" & 1"x1" ,G.I. & Bitumen

154 244 Washers, Silicon paste application for fixing the sheet . Rate also includesnecessary

bending, cutting, labor charges , Zinc Primer coat & Two coats of oil painting of

color as approved by consultants & making good the wall. (N.S.)

Providing 2 mm thick F.R.P. Gutter with necessary M.S. 400.00 Rmt

Supporting Brackets. (N.S.)

Hiring charges for J.C.B.machine inclduing cost of fuel, operator, dirver etc.. ( 12 600.00 Hrs.

hours sift day/night) (N.S.)

To provide tractor with hydraulic trolley, driver, 4 Nos. of Labor with all tools like 1661.02 No.

bucket drum, showels, trikam, pavadas, etc,, to carryout different works during

157 8 monsoon for 12 Hrs. Shift. Work shall be carried out as per the instrucitons of

Engineer In-Charge.No extra charged shall be paid for night shift.

Roller Blind Providing and fixing Roller Blind curtain fixed on window level on 3285.00 Smt

wooden batten and curtain lift with cotton thin rope, make of aerolax or equivalent

158 8 design and colour as per instruction by engineer – in – Charge with necessary

hardware fitting, material and labour etc complete.

Providing & Fixing Door closer - Door closers (Heavy type of 765 474.58 No.

number) Hardwire or Everite Prabhat or Equivalent

Providing and fixiing M.S. Fan clamps type 1 of 16 mm dia M.S. bar bent to shape 124.74 No.

with hooked ends of R.C.C. slabs during laying incl. painting the exposed protion of

loops, all as per standard

design complete.

Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 23.45 Rmt

including neat cement finishing, watering etc. complete.

162 16 Making Water connection from exi.Muni. Water line (N.S.) 250.00 No.

Providing and applying fibere reinforced cementitious micro concrete work in 530.00 Smt

cellings and beams incl.mixture of CEMSCREED HM (F) fair mate company

material, FBR bonding agent material with water in suItable proportion anti

corrosive treatment on exposed beam,celling steel bars with safeCore R incl.all kind

of labour etc.comp.including three coat of white wash.(Approved Rate)

Providing and Fixing 1 H.P. Electrical monoblock or submarcible water pumps 6800.00 Set

164 8 withmotor and required cable and switch board of approved brand and make

etc.comp.as directed.

ProvidingTMTBarFE500/500Dreinforcement for R.C.C.workincluding 75.46 Kg.

bending,binding and placing in position complete upto floor two level placing in

position complete upto floor two level placing in position complete upto floor two

Providing and fixing 30mm thick solid both side prelam PVC door shutter (sintex 2867.00 Smt

166 24 door-equivalent) with necessary alluminium fitting with EL-7 section frame

Conveyance charge of Earth,Lime, Murrum, building rubbish earch manure or 235.51 Cu.M.

167 41 sludge and excavated rock and fly ash,aggregate of any kind etc.comp.upto 5 km

Providing and laying polished granite stone slab 18 mm thick in risers of steps, dedo 2690.00 Smt

and pllars laid on 10 mm thick cement mortar 1:3 (1 cement:3 coarse sand) and

jointed with gray cement slurry including rubbing & polishing etc.complete.

Wall panelling with 12 mm MDF fixed to existing alluminium framing and making 1688.00 Smt

169 20 grove as per design and finished with royal plastic paint as per instruction of

engineer incharge. (N.S.)

Providing and laying 15mm bamboza wooden flooring as per architect's drawing 2690.00 Smt

with all necessary details as directed by the project consultants. Use underlay for

better result as per Detail specifications and directed by the project consultants.

(N.S.) (Approved Rate )

Applying two coats of Birla (whitecementbased) or Asian (acryliclapy-putty) or 40.19 Sq.M.

equivalent & two coats of primer of approved brand and manufacture on new wall

surface to give an even shade including thoroughly brushing the surface free from

mortar dropping

Finishing wall with weather proof exterior emulsion paint on wall surface (two 113.40 Sq.M.

coats) to give an required shape evenshade after thoroughly brushing the surface to

remove all dirt, and remains of loose powdered materials.etc complete

Providing and fixing flush door shutters, solid core construction with frame of first 4686.36 Smt

class hardwood with cross board and face veneer or plywood face panels, with both

side 1 mm laminate finishing including anodized aluminum butt hinges with

necessary screws. Decorative type and pine wood core anodized minimum 3 no

mm long aluminum butt hinges in flush door shutters with 2 no of brass holdfast

325 mm long 1 no brass tower bolt 250 mm long and two no of 150 mm long brass

door handle . Decorative both side laminated Flush door 35 mm thick. with frame of

10 cm x 7 cmt Indian teak wood frame including all necessary fitting fixtures

hardware screw and adhesive etc fixing up to all lead and lift height up to 45 mtr

from GL etc complete as per direction of engineer in charge

P/M/F chainlink jali 8'x4' size as per details sketch & instructionof engineer in 1230.00 Rmt

charge same as lal darwaja garden pattern consisting of 3'dia. M.S black pipe 'A'

class 5'4" ht. fixed at 8'9" c/c in C.C 1:2:4 block of 9"x9"x9" size chain link jali of

size 2"x2"x10 gauge fixed in 35x35x5 mm MS angle frame 8'x4' size with MS flat

of size 25x3 mm welded jali etc.comp.The jali is to be welded to MS pipe with MS

flat as instruction given.The M.S pipe and the M.S angle frame are to be painted one

coat of primer and two coats of paint as directed in line and level. (N.S)

Supplying and fixing of 300 mm-L x 15 mm-B x 380 mm-H Kerb block for 393.00 Rmt

Footpath in M-20 grade using 20 mm nominal size black trap aggregate of

Sevaliya/Timbaor equivalent quality for pre-cast blocks, reasonablyexposed finish/

formwork , mould with

well equippedwith vibratory system for kerb stones of approved design including

curing, etc. complete, including thecost of formwork etc. complete. The rate shall

also include necessary cutting of asphalt, fixing the Kerbstones in line and level on

cm thick sand bedding

withnecessary equipments and materials. The rate shall also include the flush

pointing in CM (1:3) for all joints of the kerb stones. Filling of zari alone the sides

of the kerbstone fixed with Bituminous concrete Bituminousconcrete / C.C. mixed

in proper position to flush withthe road surface as directed by Engineer in change to

form a portable mixture.a) Laying on 5 cm thick Sand Bedding

Providing and Laying of Rubber Moulded Paver Block Grey/Coloured 60 mm thick, 429.00 Smt

M-35 Grade of any size shape (Usually Uni-Paver Blocks) using black trap good

quality aggragate of 20 mm nominal size for footpath,parking areas, service lanes

and other areas as mentioned in the drawing / instruction of engineer in charge. Cost

includes formworks using rubber mould, Rate providing and laying paver blocks as

per required grading and specification. The paver block shall be mechanically

compacted. The work of paving blocks shall be executed in line and level by skill

176 65 mason of flooring work only. It should be laid in such a way that the no cutting of

the paver block to be necessary. if cutting of paver block necessary then it should be

cut by machine only and carting. The finished surface of the paver block shall have

resonably good, plain finished. Paver blocks shall be compacted and shall be relaid

if necessary. Gravel or such type of materials shall not be allowed for production.

Laying on 5 cms thick sand

Provoding and fixing flush door shutters, solid core construction with frame of first 1779.97 Smt

class hard wood with cross board and face veneer or ply wood face panels, including

anodised alluminium butt hinges with necessary screws. (B) Non- decorative type

177 46 and block board core anodised alluminium butt hinges in flush door shutters (2)

mm thick. Labour work for fixing any kind of paving with cement pointing in CM

1:2, including watering, ramming etc comp. as dir.For pavement

Box type metal letters forming composite box made from 1mm thick stainless steel

plate of grade 304 having brush finish of following font size to be fixed at Main

178 0 Gate in english and or Gujrati and including fixing charges approved before fixing

clent / consultant.

178.a 8 400mm high 1000.00 Nos.

178.b 8 300 mm high 750.00 Nos.

178.c 8 230 mm high 565.00 Nos.

Providing and fixing false ceiling at all height including providing and fixing of 850.00 Smt

frame work made of special sections, power pressed from M.S. sheets and

galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS :

and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of

mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with

dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat

fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of

required size and other end of angle hanger fixed with intermediate G.I. channels

45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the

ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of

mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a

direction perpendicular to G.I. intermediate channel with connecting clips made out

of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing

perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm

long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at

450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including

fixing of gypsum board to ceiling section and perimeter channel with the help of dry

wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a

flush finish of tapered and square edges of the board with recomme-nded jointing

compound , jointing tapes , finishing with jointing compound in 3 layers covering

upto 150 mm on both sides of joint and two coats of primer suitable for board, all as

per manufacturer’s specification and also including the cost of making

openings for light fittings, grills, diffusers, cutouts made with frame of perimeter

channels suitably fixed, all complete as per drawings,

Providing & Fixing SPEED BUMP - #2 No (1 black, 1 yellow) 350 x 500 x 50 mm, 2185.00 Rmt.

Size per color End Cape 350 MM x 175 MM x 50 MM TOP DESIGN - Lining Top

flat ANTI SKID PATTERN FOR GRIP COLOUR :- YELLOW & BLACK BODY

MATERIAL :- MODIFIED THERMOPLASTICS (Polymer Rubberized ) • ECO

FRIENDLY RECYCLE RUBBER Packing :- 4 pcs/ woven Bag Load Capacity :-

MT Fitting ( Fixing on TRAKE) :-4 holes & END CAPE :- 2 HOLE HEX Bolts

with Washer Epoxy for Bolt Fitting etc. complete as directed by EIC .

Providing and fixing PVC/Gpsysum plain colour false ceiling with grid type with 933.00 Smt

aluminium frame from gypsteel, fastners ,props, Finishing as per architectural

181 8 drawing allowing openings for A.C. Diffusers, Light/Electrical Points etc

–complete, Prior to fixing on frame.(Brand : Anutone or equivalent ) (N.S.) or as

directd by engineer In Charge.

Provdg. & laying S.W. Gully trap with brick masonry chamber & water tight 1263.15 No.

182 8 G.T.Stone including fixing of covervSquare mouth trap

100 mm x100 mm size P-Trap

Providing cement vata (10cmx10cmsize) quarter roundin cement mortar 1:1 23.45 Rmt.

including neat cement finishing, waterin getc. complete.

Providing and laying (to level or slopes) and jointing with stiff mixture of Cement 211.05 Rmt.

184 5 Mortar in proportion 1:1 Salt glazed stoneware pipes including testing of pipes and

joints complete.(A) 100mm dia.

Providing and laying (to level or slopes) and jointing with stiff mixture of Cement 288.23 Rmt.

185 8 Mortar in proportion 1:1 Salt glazed stoneware pipes including testing of pipes and

joints complete.(B) 150mm dia.

Constructing brick masonry chamber for underground C.I. Inspection chamber and 2903.89 Each

bends with bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and

bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm deep

for single pipe line.

Constructing brick masonry chamber for underground C.I. Inspection chamber and 3624.51 Each

bends with bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and

bed concrete etc. complete.(i)Inside dimensions 500mm x 700 mm and 450mm deep

for pipe line with one or two inlets.

Providing, supplying and fixing precast C.C. blocks (M-20) edge kerb having size 219.00 Rmt.

of 75 x 300 x 300 mm depth and as per design conveying it to the site, jointing into

C:M 1:3 and racking out the joints incl. necessary excavation of asphalt, soil

etc..completed.

Constructing a cooking Sandwich platform 60 cm. width and 70 cm high resting on 754.95 Rmt.

B.B.Masonry walls 23 cm.thick in C.M.(1:6) with (ii) Fixing black Granitee 30mm

thick laid on precast R.C.C. (1:2:4) slab with plastering on exposed faces of wall in

C.M. (1:4) etc complete

Providing and fixing hard drawn steel wire fabric 75mm x 25mm mesh or weight 754.65 Smt

190 8 not less than 7.75 kg. per Sq.M. to window frames etc. including60 x 20mm

beading of teak wood.

Providing & fixing 15 cm wide chicken mesh jali with nails & then application of 35.00 Rmt.

191 16 15 mm plaster on R.C.C.& masonary joints as per

dir.of engg.in charge

Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4- 348.08 Smt.

graded stone aggregate 20mm nominal size) laid in one layer and finished with a

of neat cement. (A) 50mm thick.

Providing and constructing, Underground (U/G) water tank of specified capacity, on 6.50 Litre

specified location, for all depths, in controlled CC of M-200 grade with bottom slab,

top slab and RCC walls, including cost of form work and reinforcement,with inside

and outside plaster in CM 1 :3 and water proofing treatment as per IWP

specification,including injection, grouting, etc. complete. The rate includes for

providing and fixing two nos. 0.6m. x 0.6 m. size medium duty CI manhole cover/s

at top, including wash out pipe line and inlet and outlet connections etc. complete.

Providing and fixing PVC Printed pain colour false ceiling with grid type with 300.12 Smt

alluminium frame consisting of 600mm x 600mm 3mm thick plain PVC sheet used

as panel insert in a frame work made using anodized alluminium T section of size

x 1 (235 x 25mm, 19 gauge or 1 mm thick) in square pattern of grid sizes of 2 x

(600 x 600mm) The alluminium frame work is supported from the cceiling with the

help of G.I. hook and G.I. wire/6mm M.S. rods of required sizes to maintain proper

level etc. The aluminium frame work is supported on side wall with the use of

alluminium L section of size 1 x1 (25 x 25mm) angles etc. complete as per direction

of Engineer in charge. Manufactures specification and drawing.

Providing and supplying of labour for necessary manual excavation, cleaning, 551.00 No

Shifting of Material Or any other, or for any other work as directed by Engineer In

charge. The Rate includes Handcart with Mazdoor

A 8 Mukadam/supervisior/karigar 425.00 No

B 10 Fitter/Plumber/Mason 697.00 No

C 8 WELDER/ Gas cutter at Day /night 689.00 No

Supplting of welding machine / gas cutter including cost of welding rods/gas, 1500.00 No

D 8 Transportation, including carting from site

E 13 Mazdoor at Day Female 450.00 No's

E 13 Mazdoor at Day Male 493.00 No's

Supplying electric breaker machine for RCC slab or asphalt demolishing work on 1071.42 Shift

site by using operator, fuel, power supply etc.complete as directed. (no payment

197 8 should be allowed for non working condition of machinery and for pipe line

excavation and M.H. work. Allowed only for break down work) (Based on

Previously approved rate by CE sir )

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR

13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of

198 0 following dia. Nominal bore tube fittings and clamps including making good the

wall, ceiling and floor etc. complete.

A 24 15 MM DIA 165.21 Rmt

B 13 20 MM DIA 202.97 Rmt

C 16 25 MM DIA 247.25 Rmt

D 24 32 MM DIA 330.36 Rmt

E 16 40 MM DIA 437.66 Rmt

F 13 50 MM DIA 647.30 Rmt

Supplying and fixing C.I. cover 300mm x 300mm without frame for Gulley trap 491.80 Each

(Standard pattern) te weight of cover to be not less 4.53 Kg.)

Providing and fixing to wall ceiling and floor 10.0Kg.F/Cm2 working pressure

polythene pipes of the following out side Dia. Low densidy, complete with special

falnge compression type fittings, wall clips etc. including making good the wall

ceiling and floor.

0 Furniture Item

Proviging and Fixing Storage Shutter made out of 50mm X 25 mm Indian 6805.00 Sq.mt.

Teakwood Frame and 18 mm Ply Board. With 1 mm thick laminate finish in the

front and 0.8 mm thick Laminate on Back Side with 12 mm thick Indian teakwood

beading. The scope also include providing and fixing s.s. finish hardware as per the

201 16 Requirement. The rate include cost of all labour, material and with all hardware like

handle, magnate, tackels, adhesive, screws, etc.for satisfactory completion of this

items.All Exposed Wood Work shall have

malamine polish etc. complete.

Providing & Fixing Sun Control Reflective Type Film / Frosted Film as Selected by 646.37 Sq.mt.

202 16 Architect/ Engg. In Charge For Glass Doors / Windows etc. as Directed.

Providing & Fixing in Position Vertical Roller Blinds with Minimum 3 1372.03 Sq.mt.

% and Maximum 5 % Light Transperace Screen Fabric Incuding Providing &

Fixing of Powder coated G- Channel at the Topof Window with necessary Screw

Cleats etc. and PVC Roller ( Weight Pipe) and PVC Chain For Up and Down

Movement of Blinds etc. of Approved Make and as per Drawings / Instruction of

Engg. in Charge For All Colors and Shades. Rates Includes all Lead and Lift For All

Floor Level, All Height , All Material , Accessories, Fixing , Scaffolding , Labor etc.

Complete in All Respects. All Required Accessories & Material must be From Same

Providing valleys 900mm overall in plain 1.6mm thick G.I. sheet fixed with G.I. J or 1042.78 Sqm

L Hooks, Bolts and nuts glavanised iron J or L Hooks Bolts and nuts 8mm dia G.I.

Limpet and bitumen washers

Structural steel work ( Confirming to IS 4923-1997) riveted, bolted or welded in 126.68 Kg

builtup for all type sections, in framed work, including cutting, hoisting, fixing in

205 309 position and applying a priming coat of approved steel primer all complete as per

the structural designs and directions of Engineer in charge.Column ( 122 x 61 x

Providing and applying approved coloured chips 20mm thick STONE CREAT 709.60 Sqmt

PLASTER for exterior / interior side on wall up to full height from ground level

consisting of 12mm thick backing coat of CM 1:3 (1 cement : 3 Bodeli sand) and

8mm thick finishing coat of CM 1:1 (1 cement (Grey / White / Colour : 1 stone grit

(approved coloured chips)) including providing & fixing 300mm wide strip of

chicken net at vertical and horizontal joints of RCC and masonary including 10mm

alluminium channel for expantion joint / grooves, curing, necessary scaffolding in

true line and level etc. complete as

directed by EIC.

Providing and laying 18 mm thick polished granite stone machine cut in single 3279.00 Sqmt

piece (Max. available) in sill and jambs of door

,window,ventilation & lift wall cladding,staircase flooring landing, risers & treads,

skirting laid over 10 mm thick cement mortar 1 : 3 (1 cement : 3 coarse sand) and

207 2 jointed with grey cement slurry with matching pigment incl. rubbing and

polishing,half rounding edge and incl. fixing of hilty fastener at every 1/3 span of

sill as required size etc. complete colour and shed as approved by architect

engineer in charge.

Filling in foundation and plinth with brick Bats Chhara in layers of 20cm. thickness 594.61 Cmt

including watering, remming and consolidating etc. complete.

Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6- 4006.15 Cmt

209 2 crushed stone aggregates 20 mm nominal size) and curing

complete including cost of formwork in (A) Wall Caps / Coping

Supply and Installation of High Density Rubber Flooring having thickness of 3917.79 Smt.

8.0mm made of 85% black rubber granules and 15% synthetic EPDM granules.

Rich colors, Environmental friendly, non-toxic, Recycled, non-pollution, Moderate

and adjusted hardness, Excellent resilience, wear well, Soft, anti-slip, anti-fatigue,

Density (kg/m3):1000-1200, Hardness (Shore a):68, Stretch (MPA):2.2, Length

(m):10m ±5cm, Width (m):1.0m ±5mm, Thickness: 8mm +0.3mm etc. complete as

directed by Engineer-In-Charge.

Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2- coarse sand : 4- 8508.71 Cmt

graded stone aggregates 20 mm nominal size) and finishing smooth with,curing etc.

211 2 complete including the cost of formwork but excluding the cost of reinforcement for

R.C.C work in (A) BEAMS :(i) Having cross-sectional area 0.05 to 0.08 Sq.M

Providing and Fixing retro reftlective Engineering grade Board using C.R.C. (M.S.) 12550.96 Smt.

sheet 2mm, angle iron 75 X 75 X 6 mm. Descaling and degreasing the board as per

requirement using epoxyprimer epoxy paint and carrying retro reflective process by

212 10 screen painting as directed etc. complete including transportating and fixing in CC

1:4:8 with Mecessary excavation curing etc. complete as per I.R.C. type design. (A)

Engineer Grade.

Providing and fixing of only type-4 for class B high intensity Grade Sheeting as per 2835.00 Smt.

213 10 IRC 67:2012 reflective sheeting of size including lettering and signs as application(

As per s.o.r year 23-24

Repairing and Removing of Existing Boards and Re-Fixing the same with the help 3128.00 Job

of Required machinery. The item rate includes Repairing, welding, Painting etc..

Comp work as Directed by Engineer in Charge. The Rate Includes necessary

Staging with all tools and tackles with Required Manpower at any Height

Providing and fixing complete sliding shutter solid PVC window 25mm thick 2576.85 Sq.mt.

factory made glazed solid PVC window shutter consisting of frame made out of

M.S. tube of 19 gauge of size 15 x 15mm for styles top, bottom rail. M.S. frame

shall have a coat of steel primer of approved make and manufacture, M.S. frame

shall be covered with 4mm thick heat mouled PVC ‘C’ channel of size 58mm x

25mm x 38-mm out of which 8mm shall be bent at 90 degree towards inner side on

front face of the window shutter forming stiles. For top rail and bottom rails, M>S.

frame shall be covered with 4mm thick, 58mm wide PVC sheet out of which 8mm

shall be bent at 90 degree towards inner side on front face and 38mm wide PVC

sheet shall cover the M.S. frame at top and bottom rail on back side of window

shutter, 4mm thick 15mm wide cross PVC sheet as gap insert for top and bottom

rail. PVC sheet beading of 8mm thick (4mm x 2) to be stuck internally with solvent

cement adhesive in top and bottom rails. Glass panel will be fitted externally in the

clear space available between stiles & rails and fixed

between PVC sheet of stiles and rails bent at 90 degree on front face 12mm x

123mm ‘L’ shape outer PVC beading nailed on stiles and rails at theback side so

that ‘L’ shape outer PVC beading can be removed when required for replacement of

broken glass etc. complete as per direction of etc. complete as per direction of

Providing and fixing PVC Printed pain colour false ceiling with grid type with 766.00 Sq.mt.

alluminium frame consisting of 600mm x 600mm 3mm thick plain PVC sheet used

as panel insert in a frame work made using anodized alluminium T section of size

x 1 (235 x 25mm, 19 gauge or 1 mm thick) in square pattern of grid sizes of 2 x

(600 x 600mm) The alluminium frame work is supported from the cceiling with the

216 8 help of G.I. hook and G.I. wire/6mm M.S. rods of required sizes to maintain proper

level etc. The aluminium frame work is

supported on side wall with the use of alluminium L section of size 1 x 1 (25 x

25mm) angles etc. complete as per direction of Engineer in charge. Manufactures

specification and drawing.

Providing and fixing sheet glass, selected quality (Type-C) bedded in putty and 1143.05 Sq.mt.

fixed with wooden beading including the cost of wooden beadings of first class

teakwood and necessary cutting of glass.

(1) 5 mm thick.

Providing 20 mm thick double coat mala cement plaster on interior brick / concrete 269.78 Sq.mt.

work for plastering comprising of base coat of 12 mm thick cement plaster in

cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top

coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including

scaffolding curing etc. complete.

Pointing on brickwork with cement mortar 1:3 (1- cement : 3-coarse sand) (A) Flush 91.20 Sq.mt.

Cutting out cracks of roof terrace to V- section , cleaning out, wetting , grouting 64.58 Rmt

with cement and sand slurry 1:3 (1-cement 3-sand )

Acoustic sheet 3500.00 Sq.mt.

PET acoustic sheets are high-density, porous sound-absorbing panels made from

polyethylene terephthalate (polyester) fibers. They feature an NRC rating of 0.75 to

0.95, a density of 180–240 kg/m³, and standard dimensions of 2400 mm ×

R-Value: Approximately 3.0 to 3.3 per inch of thickness.Density Range: Varies

from 30 kg/m³ (lightweight batts/rolls) up to 150+ kg/m³ (high-density industrial

boards and slabs).

Acoustic and Water PropertiesSound Absorption: High open-porosity matrix yields

221 50 exceptional noise reduction coefficients (NRC 0.85 to 1.05 depending on

thickness/density).

Fire and Thermal SafetyFire

Classification: Non-combustible, Euroclass A1 rating (highest grade).

Gypsum perforated

Perforation and Acoustic

PerformanceHole/Slit Types: Circular (6 mm to 20 mm), square (10x10 mm), petal,

or linear slotsPerforation Rate: Open area ranging from 9.5% to 23% of the board

surfaceAcoustic Backing: Sound-absorbing non-woven acoustic fleece or tissue on

the rear sideNRC Rating: 0.55–0.65 standard; increases up to 0.75–0.85 when

paired with mineral/glass wool infill mats

Structural steel work (ConfirmingtoIS4923-1997) riveted, bolted or welded in built 126.68 Kg

up for all type sections,in framed work,including

222 500 cutting,hoisting,fixing in position and applying apriming coat of approved steel

primer all complete as per the structural designs and directions of Engineer

incharge.Column(122x61x3.6mm )

Providing and fixing of Self Supported Roofing systems Galvalume Cladding sheet 2857.14 Smt

from with proper overlapping and seaming between different sheets without making

holes or preventing the overturning the roof by wind addition made up from superior

quality, structural grade steel. Base metal thickness (BMT): 0.80 mm (tolerance as ±

0.04mm) metal width 610 mm with tolerance of +/- 4 mm, Steel Grade : Grade D

Regular Modified Polyster Color Coated Galvalume Steel having Profiled width of

305 mm +/-10 mm. Design, supply, & fabrication of Verticale cladding sheet

mechanically seamed manufactured by American Hydraulic Machines to profiles of

223 10 Galvalume Cold Rolled Structural Steel

coils as per standard ASTM A792, Steel Sheet, Aluminum-Zinc Alloy Coated by

Hot-Dip Process. The work should be carried out by specilialize and approved

agency only. The rate of item is including fitting as per standerd specification. The

vendor shall give windload calculation before start of the work and the vendor shall

be entirely responsible for the damage of the same during transport, installation and

even after installation upto 5 years.

Providing and fixing of Self Supported Roofing systems with proper 3852.00 Sq.mt.

overlapping and seaming b/w different sheets without making holes or

preventing the overturning the roof by wind addition made up from superior quality,

structural grade steel. Base metal width 912 mm, Steel Grade : Grade D and

Thickness 1.30 mm BMT, 0.85 mm APT with tolerance of +/- 0.04 mm, Regular

Modified Polyster Imported

Color Coated Galvalume Steel having Profiled width of 625 mm +/-10mm.

Design,supply, & fabrication of self supported single span arch roof fabricated from

mechanically seamed manufactured by American Hydraulic Machines to profiles of

Imported Galvalume Cold Rolled Structural Steel coils as per standard ASTM A792,

Steel Sheet, Aluminum-Zinc Alloy Coated by Hot-Dip Process,Alloy Coating AZ-

224 1080 150(Aluminium-55%, Zinc-43.5% & Silicon 1.5%), Yield strength: 350 MPa, Paint

coating: Regular modified polyester, Top coat of painting:

micron minimum (colour 20 micron and primer 5 micron).Bottom coat of

painting: 12 micron minimum (colour 7 micron and primer 5 micron) using make of

ThyssenKrupps, Germany/Dongbu Steel Co. Limited, Korea/ Corus Steels, U.K./

Union steel(Dongkuk) Korea/ Yjeh phuf Enterprises Ltd. Taiwan roofing systems

including corrugation from single piece raw material eliminating overlaps ridges &

making leak proof water tight structure. The work should be carried out by

specilialize and approved agency only. The rate of item is including fitting as per

standardspecification. As Approved By Architect

Providing and fixing FRP frame size 125x65mm and 35 mm thick FRP shutter with 1999.98 Sq.mt.

wood grain raised pannel edde sign finish shutter having extra reinforcement on

sides & edges in Gel coat finish. The core of the shutter & frame is to be filed up

with injected polyurethene foam done in situa long with embedded wooden pieces

225 100 for stiffening & also taking hinges & fintures. The whole FRP frame &shutter is to

be water proof weathe rproof ,termite proof & resistance to mild acid/alkali. Rate

sare to be inclusive of S.Shinges with fastener sleeve & alluminium fixtures &

Providing and fixing extruded aluminum Three / Two track window having 1568.27 Sq.mt.

extruded aluminum Colour Powder Coated section frame main outer size 127mm x

38.10mm x 1.35mm ,@ Wt.1.384 Kg/mt,horizontal

Four track member size 122.20mm x 31.75mm x 1.10mm @ Wt.

Kg/mt,vertical member of size 122.20mm x 31.75mm x 1.50mm ,@ Wt.

226 40 Kg/mt with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm @

wt.of 0.456Kg/mt,vertical member of size 40mm

x 18mm x 1.29mm @ wt.of 0.456Kg/mt,@ with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc complete for

Providing, Fabricating & Fixing signage's using 304 grade Stainless steel 1.5 mm 69.00 Sqinch

thick brushed steel finish plate (2 nos) with 8mm thk. Acrylic sheet covered

withvinyl of approved colour, sandwiched between two S.S plate and fixed with s.s

struds . Sandwiched plates should be fixed in 12mm X 12mm S.S 1.5mm thk.304

grade frame and punched (laser cut) lettering carried out on both the s.s plates of

required size and text as directed by Engineer and hanged to ceiling with the help of

S.S 8mm thick chain at both ends with making all the fixing arrangement to the

ceiling and to the plate etc. complete all As per drawings and design supplied by

architect and instruction given by authority and E.I.C.

Point wiring for secondary light point with 2-1.5 sq.mm & earthwire of 1.5 sq.mm 122.21 Pt

(green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of pipe to be erected concealed in / flushed on

wall/ceiling, complete with earth continuity and necessary connection with primary

228 10 light with accessories erected on Metal / PVC box covered with 3 mm thick

PC(Polycarbonet) / Acrylic sheet for open / concealed wiring. with necessary

Lampholder / ceiling rose / H.D.Connector as directed. (a) with medium class Rigid

PVC pipe and accessories

Providing and fixing Anutone / usg / saint govind wall acoustical paneling using 7059.00 Sq.mt.

Stretch NRC Fabric fixing with FS 25 Griper system,Strand 2400 x 600 x

20mm,Tracks ( Perimeter Track , Half wrap, mid seam whatever is required) fixed

directly by staping to the SB25/SB50 which is screw fixed directly to the wall along

the perimeters with backing of Anutone make NSS SoundSmooth MB Primer

X 600 X 15 mm thick Panels with fixed horizontal/Vertical to the wall at 300mm

229 10 c/c & Anutone make Synth PF 25 x 10 with SoundStick S7adhesive used as backing

material. As per manufactures specification. High NRC, class A fire rating,Fire

Hazard Classification of class I or A in accordance with ASTM E-84 or UL-

testing parameters,The colour shade of malamine and veneer as approved by

Architect and as specified by manufacturer including all accessories, material &

Providing valleys 900mm overall in plain 1.6mm thick G.I. sheet fixed with G.I. J or 1042.78 Sq.mt.

L Hooks, Bolts and nuts glavanised iron J or L Hooks Bolts and nuts 8mm dia G.I.

230 20 Limpet and bitumen washers