Kerala

To Be Opened

Goods

Raw Materials

Supply of PET Preforms for 500ml packaged drinking water bottle for our Plant at Aruvikkara Thiruvananthapuram District and for Thodupuzha Idukki District (Kerala)

Kerala Irrigation Infra Devlp Corp Ltd

Aruvikkara, Thoduppuzha | Thiruvananthapuram, Kerala

Amount: ₹80 LCloses: 23 Sept 202614 Sept 2026Closed

Timeline

Published2 Sept 2026
Closed23 Sept 202614 Sept 2026
Bid Opening25 Sept 202616 Sept 2026

Corrigenda

Corrigendum

1 updatesLatest on 16 Sept 2026Submission Ends:14 Sept 202623 Sept 2026

Date changes

Download Ends14 Sept 202623 Sept 2026Submission Ends14 Sept 202623 Sept 2026Bid Opening16 Sept 202625 Sept 2026

Tender Value

₹80 L

EMD Value

₹50,000

Closing Date

23 Sept 2026, 11:15 amClosed

Tender Inviting Organisation

Name

Chief Engineer, KIIDC

Address

KIIDC,KWA CAMPUS, VELLAYAMBALAM THIRUVANTHAPURAM- PIN 695033

Work Description

Supply of PET Preforms for 500ml packaged drinking water bottle for our Plant at Aruvikkara thiruvananthapuram District and for Thodupuzha Idukki District

Tender Information

Tender ID

2026_KIIDC_867361_1

Reference Number

KIIDC /Tender /489 / 2026-27

Tender Type

Open Tender

Product Category

Raw Materials

Form of Contract

Item Rate

Period of Work

180 days

Location

Aruvikkara, Thoduppuzha

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender Document

Documents Required

5 documents required · 5 mandatory

Fee/PreQual/Technical

RequiredNotice Inviting Tender (.pdf)

RequiredPreliminary Agreement (.pdf)

RequiredSpecial Conditions of Contract (.pdf)

RequiredStandard Conditions of Contract (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹2,950

EMD Fee Amount

₹50,000

Important Dates

Last Activity

23 Sept 2026

Published

2 Sept 2026

Bid Opening

25 Sept 2026

Download Starts

2 Sept 2026

Download Ends

23 Sept 2026

Submission Starts

2 Sept 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (2 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Appendix A
1.01	Supply of 28mm neck size PET Preforms as per the following Techincal Specifications: Weight: 12.5 gms ± 0.50 gms, Raw Material: Polyethylene Terepthalate resin with IV 0.80 +/- 0.02. Only virgin raw material shall be used. Proof for the quality shall be produced , if asked for. Material (PET- Resin) should be as per BIS standards; 12252 : 1987, 12229 : 1987 as suitable for packing mineral water / food stuff. Overall migration should be as per IS - 14543 : 2004. , deviation can be accepted. Neck: 28 mm, Three start / half twist thread Color of preform : Clear , Length: 85 mm ± 2 mm, max. deviation can be accepted. However, performs with minus grammage deviation in 1000nos shall be limited to 5% Foreign/Black Particles: Preforms should be fully free from any Foreign or Black particles. Flashes are not acceptable. Fused Preforms: Preforms should not be stuck together. Crystallinity: Crystallinity in the end of the Preform shall not exceed more than 10 mm from the gate. Bubbles are not acceptable. Scratches: Scratches should not be visible to the naked eye Acetaldehyde Content: < 3 ppm. The product should be in line or superior in quality comparing with the leading soft drink and mineral water manufacturers. It is desirable to have plastic bottles made of polyethylene terephthalate resin containing only a very low level of aldehyde or of any other material that may give a taste to a drink bottled therein. Cost shall be inclusive of all conveyance and delivery at the factory at Aruvikkara(Thiruvananthapuram) and shall be inclusive of all unloading charges at site	5,00,000	Each	-	-
1.02	Supply of 28mm neck size PET Preforms as per the following Techincal Specifications: Weight: 12.5 gms ± 0.50 gms, Raw Material: Polyethylene Terepthalate resin with IV 0.80 +/- 0.02. Only virgin raw material shall be used. Proof for the quality shall be produced , if asked for. Material (PET- Resin) should be as per BIS standards; 12252 : 1987, 12229 : 1987 as suitable for packing mineral water / food stuff. Overall migration should be as per IS - 14543 : 2004. , deviation can be accepted. Neck: 28 mm, Three start / half twist thread Color of preform : Clear , Length: 85 mm ± 2 mm, max. deviation can be accepted. However, performs with minus grammage deviation in 1000nos shall be limited to 5% Foreign/Black Particles: Preforms should be fully free from any Foreign or Black particles. Flashes are not acceptable. Fused Preforms: Preforms should not be stuck together. Crystallinity: Crystallinity in the end of the Preform shall not exceed more than 10 mm from the gate. Bubbles are not acceptable. Scratches: Scratches should not be visible to the naked eye Acetaldehyde Content: < 3 ppm. The product should be in line or superior in quality comparing with the leading soft drink and mineral water manufacturers. It is desirable to have plastic bottles made of polyethylene terephthalate resin containing only a very low level of aldehyde or of any other material that may give a taste to a drink bottled therein. Cost shall be inclusive of all conveyance and delivery at the factory at Thodupuzha(Idukki) and shall be inclusive of all unloading charges at site	6,00,000	Each	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.18 MB

Tendernotice_2.pdf

PDF • 0.21 MB

Tendernotice_3.pdf

PDF • 0.26 MB

Tendernotice_4.pdf

PDF • 0.33 MB

Work Item Documents

BOQ_1468682.xls

BOQ • 0.31 MB

Corrigendum Documents

corrigendumtimeextention.pdf

PDF • 0.22 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Appendix A
1.01	Supply of 28mm neck size PET Preforms as per the following Techincal Specifications: Weight: 12.5 gms ± 0.50 gms, Raw Material: Polyethylene Terepthalate resin with IV 0.80 +/- 0.02. Only virgin raw material shall be used. Proof for the quality shall be produced , if asked for. Material (PET- Resin) should be as per BIS standards; 12252 : 1987, 12229 : 1987 as suitable for packing mineral water / food stuff. Overall migration should be as per IS - 14543 : 2004. , deviation can be accepted. Neck: 28 mm, Three start / half twist thread Color of preform : Clear , Length: 85 mm ± 2 mm, max. deviation can be accepted. However, performs with minus grammage deviation in 1000nos shall be limited to 5% Foreign/Black Particles: Preforms should be fully free from any Foreign or Black particles. Flashes are not acceptable. Fused Preforms: Preforms should not be stuck together. Crystallinity: Crystallinity in the end of the Preform shall not exceed more than 10 mm from the gate. Bubbles are not acceptable. Scratches: Scratches should not be visible to the naked eye Acetaldehyde Content: < 3 ppm. The product should be in line or superior in quality comparing with the leading soft drink and mineral water manufacturers. It is desirable to have plastic bottles made of polyethylene terephthalate resin containing only a very low level of aldehyde or of any other material that may give a taste to a drink bottled therein. Cost shall be inclusive of all conveyance and delivery at the factory at Aruvikkara(Thiruvananthapuram) and shall be inclusive of all unloading charges at site	5,00,000	Each	-	-
1.02	Supply of 28mm neck size PET Preforms as per the following Techincal Specifications: Weight: 12.5 gms ± 0.50 gms, Raw Material: Polyethylene Terepthalate resin with IV 0.80 +/- 0.02. Only virgin raw material shall be used. Proof for the quality shall be produced , if asked for. Material (PET- Resin) should be as per BIS standards; 12252 : 1987, 12229 : 1987 as suitable for packing mineral water / food stuff. Overall migration should be as per IS - 14543 : 2004. , deviation can be accepted. Neck: 28 mm, Three start / half twist thread Color of preform : Clear , Length: 85 mm ± 2 mm, max. deviation can be accepted. However, performs with minus grammage deviation in 1000nos shall be limited to 5% Foreign/Black Particles: Preforms should be fully free from any Foreign or Black particles. Flashes are not acceptable. Fused Preforms: Preforms should not be stuck together. Crystallinity: Crystallinity in the end of the Preform shall not exceed more than 10 mm from the gate. Bubbles are not acceptable. Scratches: Scratches should not be visible to the naked eye Acetaldehyde Content: < 3 ppm. The product should be in line or superior in quality comparing with the leading soft drink and mineral water manufacturers. It is desirable to have plastic bottles made of polyethylene terephthalate resin containing only a very low level of aldehyde or of any other material that may give a taste to a drink bottled therein. Cost shall be inclusive of all conveyance and delivery at the factory at Thodupuzha(Idukki) and shall be inclusive of all unloading charges at site	6,00,000	Each	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Appendix A

1.01

Supply of 28mm neck size PET Preforms as per the following Techincal Specifications: Weight: 12.5 gms ± 0.50 gms, Raw Material: Polyethylene Terepthalate resin with IV 0.80 +/- 0.02. Only virgin raw material shall be used. Proof for the quality shall be produced , if asked for. Material (PET- Resin) should be as per BIS standards; 12252 : 1987, 12229 : 1987 as suitable for packing mineral water / food stuff. Overall migration should be as per IS - 14543 : 2004. , deviation can be accepted. Neck: 28 mm, Three start / half twist thread Color of preform : Clear , Length: 85 mm ± 2 mm, max. deviation can be accepted. However, performs with minus grammage deviation in 1000nos shall be limited to 5% Foreign/Black Particles: Preforms should be fully free from any Foreign or Black particles. Flashes are not acceptable. Fused Preforms: Preforms should not be stuck together. Crystallinity: Crystallinity in the end of the Preform shall not exceed more than 10 mm from the gate. Bubbles are not acceptable. Scratches: Scratches should not be visible to the naked eye Acetaldehyde Content: < 3 ppm. The product should be in line or superior in quality comparing with the leading soft drink and mineral water manufacturers. It is desirable to have plastic bottles made of polyethylene terephthalate resin containing only a very low level of aldehyde or of any other material that may give a taste to a drink bottled therein. Cost shall be inclusive of all conveyance and delivery at the factory at Aruvikkara(Thiruvananthapuram) and shall be inclusive of all unloading charges at site

5,00,000

Each

1.02

Supply of 28mm neck size PET Preforms as per the following Techincal Specifications: Weight: 12.5 gms ± 0.50 gms, Raw Material: Polyethylene Terepthalate resin with IV 0.80 +/- 0.02. Only virgin raw material shall be used. Proof for the quality shall be produced , if asked for. Material (PET- Resin) should be as per BIS standards; 12252 : 1987, 12229 : 1987 as suitable for packing mineral water / food stuff. Overall migration should be as per IS - 14543 : 2004. , deviation can be accepted. Neck: 28 mm, Three start / half twist thread Color of preform : Clear , Length: 85 mm ± 2 mm, max. deviation can be accepted. However, performs with minus grammage deviation in 1000nos shall be limited to 5% Foreign/Black Particles: Preforms should be fully free from any Foreign or Black particles. Flashes are not acceptable. Fused Preforms: Preforms should not be stuck together. Crystallinity: Crystallinity in the end of the Preform shall not exceed more than 10 mm from the gate. Bubbles are not acceptable. Scratches: Scratches should not be visible to the naked eye Acetaldehyde Content: < 3 ppm. The product should be in line or superior in quality comparing with the leading soft drink and mineral water manufacturers. It is desirable to have plastic bottles made of polyethylene terephthalate resin containing only a very low level of aldehyde or of any other material that may give a taste to a drink bottled therein. Cost shall be inclusive of all conveyance and delivery at the factory at Thodupuzha(Idukki) and shall be inclusive of all unloading charges at site

6,00,000

Each