PROVN OF ACP CLADDING OF BUILDING NO P-16 AT ICGAE PORBANDAR UNDER GE (I) CG PORBANDAR

Amount

Schedule 'A' B/R

Material and labour for rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc., of grade Fe-410-W (Gde E-250) quality-A, complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-290 (Grade E-165), complete all as specified & directed by Engineer-in-Charge.

Providing and fixing Aluminum Composite panels in all colours of approved brand for external / internal wall cladding at all heights and elevations including necessary aluminium composite panel consist of 3mm thermoplastic core of anti-oxidant LDPE sandwiched between two skin of 0.5mm thick alloy sheet making a total sheet thickness of 4mm. The surface shall be finished with PDVF base coating on the top side and service coating on the reverse side shall be with a polymer paint. The system to be fixed to the brick/stone/masonry/RCC walls/framed structure with necessary clamps, bracket and anchor fasteners fixed over and including base frame fabricated with aluminium square pipe of size 25mm x 25mm with 1mm thickness in 600mm x 600mm size grid including stainless steel screws, nut, bolts, washers, cleats, weather silicone sealant for groove filling, backer rods etc, complete all as per Manufacturer instruction, complete all as specified & directed by Engineer-in-Charge. Note:- (i) All Clamps and brackets shall be hot dip galvanised minimum 80 micron thick and confirmed to IS : 4759-1996. The extruded aluminium sections shall be anodised in approved colour with anodic coating minimum 20 microns. (items include cost of aluminium frame, ACP, Cramps, weather sealant, gasket, foam, fixtures, scaffolding and making louvers in front face with ACP, all machineries and any other fastening strips, nuts, bolts, rivets, washers, etc., complete). Note:- (ii) The manufacturer shall also give guarantee/warranty for ACP for a period of Five years. Notes: a) The Contractor should have working experience of similar nature of work for last three years. b) The ACP should have installed by authorized company/agent. Make of ACP:- ALUCO Bond/ALSTONE/ ALSTRONG/VIVA/ ALUDECOR/ REYNOBOND INDIA BRAND “REYNOARCH”

Providing and fixing CNC cutting designed (any design approved by GE) Aluminum Composite panels in all colours of approved brand for external / internal wall cladding at all heights and elevations including necessary aluminium composite panel consist of 3mm thermoplastic core of anti- oxidant LDPE sandwiched between two skin of 0.5mm thick alloy sheet making a total sheet thickness of 4mm. The surface shall be finished with PDVF base coating on the top side and service coating on the reverse side shall be with a polymer paint. The system to be fixed to the brick/stone/masonry/RCC walls/framed structure with necessary clamps, bracket and anchor fasteners fixed over and including base frame fabricated with aluminium square pipe of size 25mm x 25mm with 1mm thickness in 600mm x 600mm size grid including stainless steel screws, nut, bolts, washers, cleats, weather silicone sealant for groove filling, backer rods etc., complete all as per Manufacturer instruction, complete all as specified & directed by Engineer-in-Charge. Note:- (i) All Clamps and brackets shall be hot dip galvanised minimum 80 micron thick and confirmed to IS : 4759 - 1996. The extruded aluminium sections shall be anodised in approved colour with anodic coating minimum 20 microns. (items include cost of aluminium frame, ACP , Cramps, weather sealant, gasket, foam, fixtures, scaffolding and making louvers in front face with ACP, all machineries and any other fastening strips, nuts, bolts, rivets, washers, etc., complete). Note:- (i) The manufacturer shall also give guarantee/warranty for ACP for a period of Five years. Notes: a) The Contractor should have working experience of similar nature of work for last three years. b) The ACP should have installed by authorized company/agent. Make of ACP:- ALUCO Bond/ALSTONE/ ALSTRONG/VIVA/ ALUDECOR/ REYNOBOND INDIA BRAND “REYNOARCH”

Material & Labour for Preparation of new surface of any description exc 10 cm width or girth one coat of red oxide and two coat of synthetic enamel paint, complete all as specified & directed by Engineer-in-Charge.

Schedule 'A' E/M

Taking down of outdoor/indoor unit of split type AC of capacity 1.5 ton by duly dismantling copper coil, electrical connections mounting etc. and re-installing the same in new position with replacement MS bracket, and toping up of refrigerant gas and other items as per site requirement, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for replacement of suction copper tubing of size 5/16'' dia meter with rubberised insulation and tape suitable for supply pipes for air-conditioners, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for replacement of discharge copper tubing of size existing size mm bore including brazing etc., and with rubberised insulation and tape suitable for supply pipes for air-conditioners, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for replacement of rubberised insulation cover including tape suitable supply pipes for air-conditioners, complete all as specified and directed by Engineer-in-Charge.

Taking down existing point wiring along with accessories, complete all as specified and directed by Engineer-in-Charge. Note :- making good existing disturbed surface deemed to be included in unit rate.

Taking down MCCB, MCB DB including MCB of any type and size, complete all as specified and directed by Engineer-in-Charge.

Taking down LT cable of any type and size, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for sub main wiring with two single core 2 x 4 Sqmm PVC (FRLS) insulated multi-stranded flexible copper conductor cable 660/1100 volts grade down in through including steel Conduit with all accessories, PVC insulated 1 x 4 Sqmm single core single strand copper conductor as continuous earth wire in green colour connected to common earth dolly, including taking dwon old unserviceable wiring, complete all as specified and directed by Engineer-in-Charge. Note : 1. Two runs of cable, one run of earth wire, one run of steel conduit will be measured and paid one unit.

Material & Labour for sub main wiring with two single core 2 x 1.5 Sqmm PVC (FRLS) insulated multi-stranded flexible copper conductor cable 660/1100 volts grade down in through including Steel Conduit with all accessories, PVC insulated 1 x 1.5 Sqmm single core single strand copper conductor as continuous earth wire in green colour connected to common earth dolly, including taking dwon old unserviceable wiring, complete all as specified and directed by Engineer-in-Charge. Note : 1. Two runs of cable, one run of earth wire, one run of Steel conduit will be measured and paid one unit.

Supply & fixing Distribution Board Triple pole and neutral 4 way with standard bus bar, Din bar, etc Double door, complete all as specified and directed by Engineer-in-Charge. Note:- Cost of cutting and modification in deemed to be included in unit rate

Supply and fixing MCCB 63 Amps, FP, breaking capacity 25 KA, 415 V including connecting the cables with proper lugs and glands, complete all as specified and directed by Engineer-in-Charge.

Supply & fixing MCB SP 6-32 Amp, complete all as specified and directed by Engineer-in-Charge.

Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with Earthing lead of 4mm dia galvanised iron or steel wire all as shown in Plate No. 2 to the Earthing test point all as specified and indicated including testing on completion, complete all as specified and directed by Engineer-in-Charge.

Earth continuity conductor or main Earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop Earthing etc. as required 4mm dia galvanised iron or steel wire, including taking down old earthing lead, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing Single pole and neutral enclosure with a two pin and earth plug and socket complete with one 20 Amps single pole MCB, complete all as specified and directed by Engineer-in-Charge.

Supply and laying 50 /38mm Double Walled Corrugated (DWC) Pipes having corrugation on the outer wall and plain surface on the inner wall confirming to IS14930 (Part-II) for protection of UG cables, laid in trenches / road / drain or fixed along wall, poles or laid under floor, complete all as specified and directed by Engineer-in-Charge.

Supply and laying of XLPE insulated and PVC armoured heavy duty 1100 volt grade electric LT UG cable with aluminium conductor of size 35 Sqmm 3.5 Core laid in trenches/along the wall/pole including making good the disturbed surfaces of walls/floor etc., all connections, complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing in replacement of LED 35 Watts (5700K) Bldg Security light fitting, and including with GI Pipe 32mm dia bracket with connected with 2 core flexible copper wire 0.50 Sqmm from ceiling rose after fixing fitting in position at site, complete all as specified and directed by Engineer-in-Charge.

K K Construction Co (BID ID -3268472)

SHREE KEDARNATH ENTERPRISE (BID ID -3266305)

Vijay Construction Co (BID ID -3269742)

SURAJ ENTERPRISE (BID ID -3266554)

Leo Elevator Company (BID ID -3274160)

OM ENGINEERING (BID ID -3266507)

VINUBHAI P. CHANDRA (BID ID -3274409)

nidhi construction co. (BID ID -3272956)