Maintenance and Repair Works at Divisional Fund Office Kashmir.

Providing / fixing/ fabrication of study tables / benches for seating bench of size 1.22 mt x 0.320 mt with height of bench 0.431 mt along with size of desk of size 1.83 mt x 0.397 mt with height 0.737 mt and made out of structural steel including cutting, fixing, welding, fixing of Gyser bolts, washer and application of red oxide primer, synthetic enamel paaint etc. and all carriages including loading/ unloading upto site of work complete job as per directions of Engineer-in-charge.

Providing and fixing plank type seating arrangement of 25mm thick rubber wood of standard quality finished both sides on fabricated structural steel study table / benches fxed in lecture halls including cost of screws, nuts, fevicol, nails, and all carriages including loading/ unloading upto site of work as per directions of Engineer-in-charge.(Ornamental Type).

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion Powder coated aluminum (minimum thickness of powder coated 50 microns)

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.) With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm)

Providing and fixing A.C.P 3mm multi coloured (Fire retardent) ceiling, ventilator Shutters and partitions etc. with EPDM rubber / neoprene gasket , taping, waterproof silicon sealent or as required at site as per the directions of concerned Engineer-in-charge.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer in- plate etc. complete as per the direction of Engineer-in-charge. With Stainless Steel cover plate minimum 1.25 mm thickness.

Providing and fixing aluminum round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-charge. Powder coated minimum thickness 50 micron aluminum

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodized (anodic coating not less than grade AC 10 as per IS : 1868) aluminum lever handles of approved quality with necessary screws etc. complete.

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood

Providing and fixing 35mm glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class Kail wood

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class Kail wood 35mm

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture

Supply and installation of hot and cold type 1.5 tonne AC of IFB or Blue star or equivalent including with voltage stablizer with 40mm DP MCB with socket and stand including installation charges complete job.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm

Providing and fixing of superior quality wall paper of approved brand, manufacture, color and design with necessary adhesive Gum powder fully chemicalised or favicol whichever is suitable including prepration of wall surface by way of sand papering, applying of POP/wall putty and other necessary repair , all complete at all heights as per specifications, drawings and as directed by Engineer In-charge etc.

Providing and fixing of cushioning comprising of 50mm foam with velvet covering incl. cost of necessary nails, adhesives, fixtures all complete as per specifications and as directed by Engineer In-charge etc.

Varnishing with varnish of approved brand and manufacture: Two or more coats of glue sizing with copal varnish over and under coat of flatting varnish.