CONSTRUCTION OF SP & ABOVE RESIDENT CAT-E1-20 (P+11) AT BODAKDEV , AHEMEDABAD(INCLUDING ELECTRICAL WORK) (First attempt) (SBD)

NAME OF WORK:-CONSTRUCTION OF SP & ABOVE RESIDENT CAT-E1-20 (P+11) AT BODAKDEV , AHEMEDABAD(INCLUDING ELECTRICAL WORK)

Statement showing the approximate quantities for the items of the above work to be carried out and approximate cost put to tender for Rs.

SCHEDULE -B WITH RATE

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Demolition of brick work & stone masonary incl. stacking of servicable material and disposal of

unservicable material with disposing all lead and lift. (iii)In cement mortar Rupees Five Hundred Forty Four

And Paise Ninety Five Only

Demolition including stacking of serviceable materials and disposal of unserviceable material with all

lead and lift (i)R.C.C. work Rupees One Thousand Forty

Seven And Paise Thirty Eight Only

Excavation for foundation in loose or soft soil upto 1.5 m. depth including sorting out and stacking of

useful materials and disposing of the excavated stuff upto any Lead and lift. Rupees One Hundred Fifteen And

Paise Ninety Two Only

Excavation for foundation indense or hard soil 1.5 m. to 3.0 m depth including sorting out and stacking

of useful materials and disposing of the excavated stuff upto any Lead and lift. Rupees One Hundred Sixty And

Paise Seventy Seven Only

Excavation for foundation indense or hard soil 3.0 m. to 5.0 m depth including sorting out and stacking

of useful materials and disposing of the excavated stuff upto any Lead and lift. Rupees One Hundred Seventy Two

And Paise Fifty Only

Excavation for foundation indense or hard soil MORE THAN 5.0 m depth including sorting out and

stacking of useful materials and disposing of the excavated stuff upto any Lead and lift. Rupees One Hundred Ninety Three

And Paise Forty One Only

Filling avaliable excavate earth ( excluding rock). In trenches, plinth sides of foundations etc. in layers

NOt exceeding 20 cms. In depth consolidation each deposited layer by ramming and watering. Rupees One Hundred Twenty Nine

And Paise Ten Only

Filling In Foundation & Plinth With Murrum Or Selected Soil In Layers Of 20Cms Th. Inclu.. Watering

, Ramming & Consolidating Etc.. Complete Rupees Two Hundred Eighty Six

And Paise Twenty Only

Applying general insecticide pest control treatment to floors, cupboards etc including labour material

etc. complete. Using Imidacloprid 30.5 SCas

Rupees Eighty Eight And Paise

9 as Per 6313part -II (0.075 % concentration by mass) is recommended 10.5 ml chemical diluted with 5 723.00 SMT 88.40

litres of water application 0.5 litre chemical/Sqm if surface is recommended as per I.S.

FILLING in plinth with SAND under floors including watering, raming consolidating and dressing etc.

complete. Rupees Four Hundred Fifty Five

And Paise Sixty Three Only

Providing and laying in position Ready Mixed M-150 grade concrete for reinforced cement conctere

work, using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer For up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

Rupees Three Thousand Seven

plywood only with fair finish & proping must be of steel only so as to give a fair finish.) Providing & Mixing

11 1.00 CMT 3790.21 Hundred Ninety And Paise Twenty

admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer -in-charge.

Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS 456 shall be

maintained) in Foundation and Mass Concrete.(FOR GRID SLAB )

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing and laying in position Ready Mixed M-200 grade concrete for reinforced cement conctere

work, using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer For up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

Rupees Four Thousand Seven

plywood only with fair finish and proping must be of steel only as to give a fair finish Providing & Mixing

12 116.00 CMT 4793.10 Hundred Ninety Three And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer -in-charge.

Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS 456 shall be

maintained) in Foundation and Mass Concrete.(FOR GRID SLAB )

Providing and laying in position Ready Mixed M-200 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including providing formwork with Rupees Six Thousand One

13 sheating steel sheets and the cost of centering shuttering, Providing & Mixing admixtures in 11.00 CMT 6179.53 Hundred Seventy Nine And Paise

recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability Fifty Three Only

without impairing strength and durability as per direction of the Engineer - in - charge. Without Fly Ash

But Excluding Cost Of Reinforcement (Min cement level as per latest IS 456 shall be maintained) in

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including providing formwork with Rupees Six Thousand Two

14 sheating steel sheets and the cost of centering shuttering, Providing & Mixing admixtures in 26.00 CMT 6239.99 Hundred Thirty Nine And Paise

recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability Ninety Nine Only

without impairing strength and durability as per direction of the Engineer - in - charge. Without Fly Ash

But Excluding Cost Of Reinforcement (Min cement level as per latest IS 456 shall be maintained) in

Providing & laying plain cement CONCRETE 1:2:4 (1-cement : 2-coarse sand : 4-graded STONE Rupees Three Thousand Six

15 AGGREGATE 20 mm NOminal size) and curing etc. complete excluding cost of formwork in 5.00 CMT 3661.30 Hundred Sixty One And Paise

FOUNDATION & PLINTH. Thirty Only

Providing and laying cement concrete 1:3:6(1- cement : 3- coarse sand : 6- hand broken stone

Rupees Two Thousand Nine

16 aggregates 20 mm. nominal size) and curing complete excluding cost of from work in : (a) Foundation 228.00 CMT 2976.00

Hundred Seventy Six Only

Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand : 8- hand broken stone Rupees Two Thousand Six

17 aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and 91.00 CMT 2653.67 Hundred Fifty Three And Paise

Plinth Sixty Seven Only

Providing and laying in position Ready Mixed M-300 grade concrete for reinforced cement conctere

work, using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including providing formwork with Rupees Five Thousand Three

18 sheating steel sheets and the cost of centering, shuttering. Providing & Mixing admixtures in

29.00 CMT 5337.29 Hundred Thirty Seven And Paise

recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, improve workability

Twenty Nine Only

without impairing strength and durability as per direction of the Engineer -in-charge. Without Fly Ash But

Excluding Cost Of Reinforcement (Min cement level as per latest IS 456 shall be maintained) in

Foundation FOOTING and Mass Concrete.

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work, using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer For up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of Rupees Five Thousand One

19 plywood only with fair finish and proping must be of steel only as to give a fair finish Providing & Mixing 796.00 CMT 5147.19 Hundred Forty Seven And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer -in-charge.

Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS 456 shall be

maintained) in Foundation FOOTING and Mass Concrete.

Providing and laying in position Ready Mixed M-300 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including providing formwork with Rupees Ten Thousand Seven

20 sheating steel sheets and the cost of centering shuttering, Providing & Mixing admixtures in 7.00 CMT 10785.98 Hundred Eighty Five And Paise

recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability

Ninety Eight Only

without impairing strength and durability as per direction of the Engineer - in - charge. Without Fly Ash

But Excluding Cost Of Reinforcement (Min cement level as per latest IS 456 shall be maintained) in

Column having any cross sectional area of Columns.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

Rupees Nine Thousand Two

plywood only with fair finish and proping must be of steel only as to give a fair finish Providing & Mixing

21 16.00 CMT 9205.78 Hundred Five And Paise Seventy

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in Column having any cross sectional area of Columns. FOR COLUMN UPTO

Providing and laying in position Ready Mixed M-200 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including providing formwork with Rupees Ten Thousand Five

22 sheating steel sheets and the cost of centering shuttering, Providing & Mixing admixtures in 14.00 CMT 10535.42 Hundred Thirty Five And Paise

recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability Forty Two Only

without impairing strength and durability as per direction of the Engineer - in - charge. Without Fly Ash

But Excluding Cost Of Reinforcement (Min cement level as per latest IS 456 shall be maintained) in

Column having any cross sectional area of Columns FOR GROUND FLOOR

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including providing formwork with

Rupees Ten Thousand Five

(formwork of plywood only with fair finish & proping must be of steel only so as to give a fair finish.) .,

23 9.00 CMT 10595.88 Hundred Ninety Five And Paise

Providing & Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting

Eighty Eight Only

of concrete, improve workability without impairing strength and durability as per direction of the Engineer

- in - charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

456 shall be maintained) in COLUMN having any cross sectional area of Columns. FOR GROUND

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

Rupees Seven Thousand Nine

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing &

24 159.00 CMt 7964.53 Hundred Sixty Four And Paise Fifty

Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in SHEAR WALL having any cross sectional area of SHEAR WALL UP TO

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

Rupees Seven Thousand Nine

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing & Mixing

25 86.00 CMT 7964.53 Hundred Sixty Four And Paise Fifty

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in SHEAR WALL having any cross sectional area of SHEAR WALL . FOR

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing & Mixing Rupees Eight Thousand Four And

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, Paise Thirty Eight Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in SHEAR WALL having any cross sectional area of SHEAR WALL . FOR FIRST

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing & Mixing Rupees Eight Thousand Forty Four

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, And Paise Twenty Three Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in SHEAR WALL having any cross sectional area of SHEAR WALL . FOR

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing & Mixing Rupees Eight Thousand Eighty

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, Four And Paise Eight Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in SHEAR WALL having any cross sectional area of SHEAR WALL . FOR THIRD

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing and laying in position Ready Mixed M-250grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

Rupees Eight Thousand One

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing & Mixing

29 86.00 CMT 8123.93 Hundred Twenty Three And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in - Ninety Three Only

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in SHEAR WALL having any cross sectional area of SHEAR WALL . FOR

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

Rupees Eight Thousand One

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing & Mixing

30 86.00 CMT 8163.78 Hundred Sixty Three And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

Seventy Eight Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in SHEAR WALL having any cross sectional area of SHEAR WALL . FOR FIFTH

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

Rupees Eight Thousand Two

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing & Mixing

31 86.00 CMT 8203.63 Hundred Three And Paise Sixty

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in SHEAR WALL having any cross sectional area of SHEAR WALL . FOR SIXTH

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

Rupees Eight Thousand Two

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing & Mixing

32 86.00 CMT 8243.48 Hundred Forty Three And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

Forty Eight Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in SHEAR WALL having any cross sectional area of SHEAR WALL . FOR

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

Rupees Eight Thousand Two

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing & Mixing

33 86.00 CMT 8283.33 Hundred Eighty Three And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

Thirty Three Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in SHEAR WALL having any cross sectional area of SHEAR WALL . FOR

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

Rupees Eight Thousand Three

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing & Mixing

34 86.00 CMT 8323.18 Hundred Twenty Three And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in SHEAR WALL having any cross sectional area of SHEAR WALL . FOR

Providing and laying in position Ready MixedM-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

Rupees Eight Thousand Three

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing & Mixing

35 86.00 CMT 8363.03 Hundred Sixty Three And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in SHEAR WALL having any cross sectional area of SHEAR WALL . FOR TENTH

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

Rupees Eight Thousand Four

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing & Mixing

36 86.00 CMT 8402.88 Hundred Two And Paise Eighty

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in SHEAR WALL having any cross sectional area of SHEAR WALL . FOR

ELEVENTH FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

Rupees Eight Thousand Four

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing & Mixing

37 36.00 CMT 8442.73 Hundred Forty Two And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

Seventy Three Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in SHEAR WALL having any cross sectional area of SHEAR WALL . FOR

TWELVETH FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

Rupees Eight Thousand Four

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing & Mixing

38 6.00 CMT 8482.58 Hundred Eighty Two And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

Fifty Eight Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in SHEAR WALL having any cross sectional area of SHEAR WALL . FOR

THIRTEENTH FLOOR.

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

Rupees Seven Thousand Three

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing & Mixing

39 86.00 CMT 7341.98 Hundred Forty One And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

Ninety Eight Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) for PLINTH BEAM for any cross sectional area of beam

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing having

continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement

Rupees Nine Thousand Forty Eight

40 concrete work including pumping of R.M.C. from transit mixer to site of laying & finishing, including the 59.00 CMT 9048.81

And Paise Eighty One Only

cost of formwork of plywood only with fair finish and proping must be of steel only as to give a fair finish .

Providing & Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting

of concrete, improve workability without impairing strength and durability as per direction of the Engineer

- in - charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

456 shall be maintained) in Beam having any cross section area of BEAM. FOR GROUND FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing having

continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement

Rupees Nine Thousand Eighty

41 concrete work including pumping of R.M.C. from transit mixer to site of laying & finishing, including the 49.00 CMT 9088.66

Eight And Paise Sixty Six Only

cost of formwork of plywood only with fair finish and proping must be of steel only as to give a fair finish .

Providing & Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting

of concrete, improve workability without impairing strength and durability as per direction of the Engineer

- in - charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

456 shall be maintained) in Beam having any cross section area of BEAM. FOR FIRST FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing having

continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement Rupees Nine Thousand One

42 concrete work including pumping of R.M.C. from transit mixer to site of laying & finishing, including the 50.00 CMT 9128.51 Hundred Twenty Eight And Paise

cost of formwork of plywood only with fair finish and proping must be of steel only as to give a fair finish . Fifty One Only

Providing & Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting

of concrete, improve workability without impairing strength and durability as per direction of the Engineer

- in - charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

456 shall be maintained) in Beam having any cross section area of BEAM. FOR SECOND FLOOR.

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing having

continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement Rupees Nine Thousand One

43 concrete work including pumping of R.M.C. from transit mixer to site of laying & finishing, including the 50.00 CMT 9168.36 Hundred Sixty Eight And Paise

cost of formwork of plywood only with fair finish and proping must be of steel only as to give a fair finish . Thirty Six Only

Providing & Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting

of concrete, improve workability without impairing strength and durability as per direction of the Engineer

- in - charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

456 shall be maintained) in Beam having any cross section area of BEAM. FOR THIRD FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing having

continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement Rupees Nine Thousand Two

44 concrete work including pumping of R.M.C. from transit mixer to site of laying & finishing, including the 50.00 CMT 9208.21 Hundred Eight And Paise Twenty

cost of formwork of plywood only with fair finish and proping must be of steel only as to give a fair finish . One Only

Providing & Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting

of concrete, improve workability without impairing strength and durability as per direction of the Engineer

- in - charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

456 shall be maintained) in Beam having any cross section area of BEAM. FOR FOURTHFLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing having

continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement Rupees Nine Thousand Two

45 concrete work including pumping of R.M.C. from transit mixer to site of laying & finishing, including the 50.00 CMT 9248.06 Hundred Forty Eight And Paise Six

cost of formwork of plywood only with fair finish and proping must be of steel only as to give a fair finish . Only

Providing & Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting

of concrete, improve workability without impairing strength and durability as per direction of the Engineer

- in - charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

456 shall be maintained) in Beam having any cross section area of BEAM. FOR FIFTH FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing having

continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement Rupees Nine Thousand Two

46 concrete work including pumping of R.M.C. from transit mixer to site of laying & finishing, including the 50.00 CMT 9287.91 Hundred Eighty Seven And Paise

cost of formwork of plywood only with fair finish and proping must be of steel only as to give a fair finish . Ninety One Only

Providing & Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting

of concrete, improve workability without impairing strength and durability as per direction of the Engineer

- in - charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

456 shall be maintained) in Beam having any cross section area of BEAM. FORSIXTH FLOOR.

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing having

continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement Rupees Nine Thousand Three

47 concrete work including pumping of R.M.C. from transit mixer to site of laying & finishing, including the 50.00 CMT 9327.76 Hundred Twenty Seven And Paise

cost of formwork of plywood only with fair finish and proping must be of steel only as to give a fair finish . Seventy Six Only

Providing & Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting

of concrete, improve workability without impairing strength and durability as per direction of the Engineer

- in - charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

456 shall be maintained) in Beam having any cross section area of BEAM. FOR SEVENTH FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing having

continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement Rupees Nine Thousand Three

48 concrete work including pumping of R.M.C. from transit mixer to site of laying & finishing, including the 50.00 CMT 9367.61 Hundred Sixty Seven And Paise

cost of formwork of plywood only with fair finish and proping must be of steel only as to give a fair finish . Sixty One Only

Providing & Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting

of concrete, improve workability without impairing strength and durability as per direction of the Engineer

- in - charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

456 shall be maintained) in Beam having any cross section area of BEAM. FOR EIGHTH FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing having

continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement Rupees Nine Thousand Four

49 concrete work including pumping of R.M.C. from transit mixer to site of laying & finishing, including the 50.00 CMT 9407.46 Hundred Seven And Paise Forty

cost of formwork of plywood only with fair finish and proping must be of steel only as to give a fair finish . Six Only

Providing & Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting

of concrete, improve workability without impairing strength and durability as per direction of the Engineer

- in - charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

456 shall be maintained) in Beam having any cross section area of BEAM. FOR NINETH FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing having

continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement Rupees Nine Thousand Four

50 concrete work including pumping of R.M.C. from transit mixer to site of laying & finishing, including the 50.00 CMT 9447.31 Hundred Forty Seven And Paise

cost of formwork of plywood only with fair finish and proping must be of steel only as to give a fair finish . Thirty One Only

Providing & Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting

of concrete, improve workability without impairing strength and durability as per direction of the Engineer

- in - charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

456 shall be maintained) in Beam having any cross section area of BEAM. FOR TENTH FLOOR.

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing having

continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement

Rupees Nine Thousand Four

concrete work including pumping of R.M.C. from transit mixer to site of laying & finishing, including the

51 51.00 CMT 9487.16 Hundred Eighty Seven And Paise

cost of formwork of plywood only with fair finish and proping must be of steel only as to give a fair finish .

Providing & Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting Sixteen Only

of concrete, improve workability without impairing strength and durability as per direction of the Engineer

- in - charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

456 shall be maintained) in Beam having any cross section area of BEAM. FOR ELEVENTH FLOOR.

Providing and laying in position Ready Mixed M-300 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing having

continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement

Rupees Nine Thousand Seven

concrete work including pumping of R.M.C. from transit mixer to site of laying & finishing, including the

52 11.00 CMT 9717.11 Hundred Seventeen And Paise

cost of formwork of plywood only with fair finish and proping must be of steel only as to give a fair finish .

Providing & Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting Eleven Only

of concrete, improve workability without impairing strength and durability as per direction of the Engineer

- in - charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

456 shall be maintained) in Beam having any cross section area of BEAM. FOR TWELVETH FLOOR.

Providing and laying in position Ready Mixed M-300 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing having

continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement Rupees Nine Thousand Seven

53 concrete work including pumping of R.M.C. from transit mixer to site of laying & finishing, including the 7.00 CMT 9756.96 Hundred Fifty Six And Paise Ninety

cost of formwork of plywood only with fair finish and proping must be of steel only as to give a fair finish . Six Only

Providing & Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting

of concrete, improve workability without impairing strength and durability as per direction of the Engineer

- in - charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

456 shall be maintained) in Beam having any cross section area of BEAM. FOR THIRTEENTH FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

Rupees Nine Thousand Two

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing & Mixing

54 91.00 CMT 9246.51 Hundred Forty Six And Paise Fifty

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in SLAB having thickness of 10cm upto 13cm. FOR GROUND FLOOR.

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

Rupees Nine Thousand Two

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing & Mixing

55 69.00 CMT 9286.36 Hundred Eighty Six And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

Thirty Six Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in SLAB having thickness of 10cm upto 13cm. FOR FIRST FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

Rupees Nine Thousand Three

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing & Mixing

56 69.00 CMT 9326.21 Hundred Twenty Six And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

Twenty One Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in SLAB having thickness of 10cm upto 13cm. FOR SECOND FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

Rupees Nine Thousand Three

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing & Mixing

57 69.00 CMT 9366.06 Hundred Sixty Six And Paise Six

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in SLAB having thickness of 10cm upto 13cm FOR THIRD FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

Rupees Nine Thousand Four

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing & Mixing

58 69.00 CMT 9405.91 Hundred Five And Paise Ninety

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in SLAB having thickness of 10cm upto 13cm FOR FOURTH FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

Rupees Nine Thousand Four

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing & Mixing

59 69.00 CMT 9445.76 Hundred Forty Five And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

Seventy Six Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in SLAB having thickness of 10cm upto 13cm FOR FIFTH FLOOR.

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

Rupees Nine Thousand Four

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing & Mixing

60 69.00 CMT 9485.61 Hundred Eighty Five And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in SLAB having thickness of 10cm upto 13cm FOR SIXTH FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

Rupees Nine Thousand Five

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing & Mixing

61 69.00 CMT 9525.46 Hundred Twenty Five And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in SLAB having thickness of 10cm upto 13cm. FOR SEVENTH FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing & Mixing Rupees Nine Thousand Five

62 admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, 69.00 CMT 9565.31 Hundred Sixty Five And Paise

improve workability without impairing strength and durability as per direction of the Engineer - in - Thirty One Only

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in SLAB having thickness of 10cm upto 13cm FOR EIGHTH FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

Rupees Nine Thousand Six

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing & Mixing

63 69.00 CMT 9605.16 Hundred Five And Paise Sixteen

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in - Only

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in SLAB having thickness of 10cm upto 13cm FOR NINTH FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

Rupees Nine Thousand Six

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing & Mixing

64 69.00 CMT 9645.01 Hundred Forty Five And Paise One

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in - Only

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in SLAB having thickness of 10cm upto 13cm. FOR TENTH FLOOR.

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

Rupees Nine Thousand Six

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing & Mixing

65 69.00 CMT 9684.86 Hundred Eighty Four And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

Eighty Six Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in SLAB having thickness of 10cm upto 13cm FOR ELEVENTH FLOOR.

Providing and laying in position Ready Mixed M-300 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, including the cost of formwork of

Rupees Nine Thousand Nine

plywood only with fair finish and proping must be of steel only as to give a fair finish . Providing & Mixing

66 6.00 CMT 9914.81 Hundred Fourteen And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

Eighty One Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in SLAB having thickness of 10cm upto 13cm. FOR TWELVETH FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including providing formwork with

Rupees Eight Thousand Seven

sheating steel sheets and the cost of centering shuttering, Providing & Mixing admixtures in

67 11.00 Cum 8709.21 Hundred Nine And Paise Twenty

recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability

without impairing strength and durability as per direction of the Engineer - in - charge. Without Fly Ash

But Excluding Cost Of Reinforcement (Min cement level as per latest IS 456 shall be maintained) in

SLAB having thickness of 13cm upto 15cm for GROUND FLOOR

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

Rupees Eight Thousand Two

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & Mixing

68 18.00 CMT 8273.05 Hundred Seventy Three And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in LANDING SLAB having thickness of 16cm upto 18cm. FOR GROUND FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

Rupees Eight Thousand Three

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & Mixing

69 26.00 CMT 8312.90 Hundred Twelve And Paise Ninety

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in LANDING SLAB having thickness of 16cm upto 18cm. FOR FIRST FLOOR.

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

Rupees Eight Thousand Three

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & Mixing

70 26.00 CMT 8352.75 Hundred Fifty Two And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

Seventy Five Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in LANDING SLAB having thickness of 16cm upto 18cm. FOR SECOND FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

Rupees Eight Thousand Three

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & Mixing

71 26.00 CMT 8392.60 Hundred Ninety Two And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in LANDING SLAB having thickness of 16cm upto 18cm. FOR THIRD FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

Rupees Eight Thousand Four

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & Mixing

72 26.00 CMT 8432.45 Hundred Thirty Two And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

Forty Five Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in LANDING SLAB having thickness of 16cm upto 18cm. FOR FOURTH

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

Rupees Eight Thousand Four

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & Mixing

73 26.00 CMT 8472.30 Hundred Seventy Two And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in LANDING SLAB having thickness of 16cm upto 18cm. FOR FIFTH FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

Rupees Eight Thousand Five

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & Mixing

74 26.00 CMT 8512.15 Hundred Twelve And Paise Fifteen

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in - Only

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in LANDING SLAB having thickness of 16cm upto 18cm. FOR SIXTH FLOOR.

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & Mixing Rupees Eight Thousand Five

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, Hundred Fifty Two Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in LANDING SLAB having thickness of 16cm upto 18cm. FOR SEVENTH

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

Rupees Eight Thousand Five

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & Mixing

76 26.00 CMT 8591.85 Hundred Ninety One And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in - Eighty Five Only

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in LANDING SLAB having thickness of 16cm upto 18cm. FOR EIGHTH FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

Rupees Eight Thousand Six

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & Mixing

77 26.00 CMT 8631.70 Hundred Thirty One And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in - Seventy Only

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in LANDING SLAB having thickness of 16cm upto 18cm. FOR NINTH FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

Rupees Eight Thousand Six

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & Mixing

78 26.00 CMT 8671.55 Hundred Seventy One And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in - Fifty Five Only

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in LANDING SLAB having thickness of 16cm upto 18cm. FOR TEN FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

Rupees Eight Thousand Seven

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & Mixing

79 26.00 CMT 8711.40 Hundred Eleven And Paise Forty

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in - Only

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in LANDING SLAB having thickness of 16cm upto 18cm. FOR ELEVENTH

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing and laying in position Ready Mixed M-300 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

Rupees Eight Thousand Nine

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & Mixing

80 24.00 CMT 8941.35 Hundred Forty One And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in - Thirty Five Only

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in LANDING SLAB having thickness of 16cm upto 18cm. FOR TWELVETH

Providing and laying in position Ready Mixed M-300 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

Rupees Eight Thousand Nine

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & Mixing

81 11.00 CMT 8981.20 Hundred Eighty One And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in - Twenty Only

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in LANDING SLAB having thickness of 16cm upto 18cm. FOR THIRTEENTH

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & Mixing Rupees Eight Thousand Fifty Eight

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, And Paise Eighty Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in LANDING SLAB having thickness of 18cm upto 20cm. FOR GROUND

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & Mixing Rupees Eight Thousand Ninety

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, Eight And Paise Sixty Five Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in LANDING SLAB having thickness of 18cm upto 20cm. FOR FIRST FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

Rupees Eight Thousand One

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & Mixing

84 5.00 CMT 8138.50 Hundred Thirty Eight And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in - Fifty Only

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in LANDING SLAB having thickness of 18cm upto 20cm. FOR SECOND

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

Rupees Eight Thousand One

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & Mixing

85 5.00 CMT 8178.35 Hundred Seventy Eight And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in - Thirty Five Only

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in LANDING SLAB having thickness of 18cm upto 20cm. FOR THIRD FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

Rupees Eight Thousand Two

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & Mixing

86 5.00 CMT 8218.20 Hundred Eighteen And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in - Twenty Only

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in LANDING SLAB having thickness of18cm upto 20cm. FOR FOURTH

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

Rupees Eight Thousand Two

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & Mixing

87 5.00 CMT 8258.05 Hundred Fifty Eight And Paise Five

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in - Only

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in LANDING SLAB having thickness of 18cm upto 20cm. FOR FIFTH FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

Rupees Eight Thousand Two

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & Mixing

88 5.00 CMT 8297.90 Hundred Ninety Seven And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in - Ninety Only

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in LANDING SLAB having thickness of 18cm upto 20cm. FOR SIXTH FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

Rupees Eight Thousand Three

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & Mixing

89 5.00 CMT 8337.75 Hundred Thirty Seven And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in - Seventy Five Only

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in LANDING SLAB having thickness of 18cm upto 20cm. FOR SEVENTH

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

Rupees Eight Thousand Three

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & Mixing

90 5.00 CMT 8377.60 Hundred Seventy Seven And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in - Sixty Only

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in LANDING SLAB having thickness of 18cm upto 20cm. FOR EIGHTH FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

Rupees Eight Thousand Four

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & Mixing

91 5.00 CMT 8417.45 Hundred Seventeen And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in - Forty Five Only

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in LANDING SLAB having thickness of 18cm upto 20cm. FOR NINTH FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

Rupees Eight Thousand Four

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & Mixing

92 5.00 CMT 8457.30 Hundred Fifty Seven And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in - Thirty Only

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in LANDING SLAB having thickness of 18cm upto 20cm. FOR TEN FLOOR.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

Rupees Eight Thousand Four

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & Mixing

93 5.00 CMT 8497.15 Hundred Ninety Seven And Paise

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in - Fifteen Only

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in LANDING SLAB having thickness of 18cm upto 20cm. FOR ELEVENTH

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of Rupees Eight Thousand Seven

94 plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & 6.00 CMT 8774.09 Hundred Seventy Four And Paise

Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, Nine Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in R.C.C. Lintels. FOR GROUND FLOOR

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of Rupees Eight Thousand Eight

95 plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & 2.00 CMT 8813.94 Hundred Thirteen And Paise Ninety

Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, Four Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in R.C.C. Lintels. FOR FIRST FLOOR

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of Rupees Eight Thousand Eight

96 plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & 3.00 CMT 8853.79 Hundred Fifty Three And Paise

Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, Seventy Nine Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in R.C.C. Lintels. FOR SECOND FLOOR

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of Rupees Eight Thousand Eight

97 plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & 3.00 CMT 8893.64 Hundred Ninety Three And Paise

Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, Sixty Four Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in R.C.C. Lintels. FOR THIRD FLOOR

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of Rupees Eight Thousand Nine

98 plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & 3.00 CMT 8933.49 Hundred Thirty Three And Paise

Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, Forty Nine Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in R.C.C. Lintels. FOR FOURTH FLOOR

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of Rupees Eight Thousand Nine

99 plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & 3.00 CMT 8973.34 Hundred Seventy Three And Paise

Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, Thirty Four Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in R.C.C. Lintels. FOR FIFTH FLOOR

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & Rupees Nine Thousand Thirteen

Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, And Paise Nineteen Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in R.C.C. Lintels. FOR SIXTH FLOOR

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & Rupees Nine Thousand Fifty Three

Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, And Paise Four Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in R.C.C. Lintels. FOR SEVENTH FLOOR

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & Rupees Nine Thousand Ninety Two

Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, And Paise Eighty Nine Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in R.C.C. Lintels. FOR EIGHTH FLOOR

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of Rupees Nine Thousand One

103 plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & 3.00 CMT 9132.74 Hundred Thirty Two And Paise

Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, Seventy Four Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in R.C.C. Lintels. FOR NINTH FLOOR

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of Rupees Nine Thousand One

104 plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & 3.00 CMT 9172.59 Hundred Seventy Two And Paise

Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, Fifty Nine Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in R.C.C. Lintels. FOR TENTH FLOOR

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of Rupees Nine Thousand Two

105 plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & 3.00 CMT 9212.44 Hundred Twelve And Paise Forty

Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, Four Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in R.C.C. Lintels. FOR ELEVENTH FLOOR

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of Rupees Nine Thousand Two

106 plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & 1.00 CMT 9252.29 Hundred Fifty Two And Paise

Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, Twenty Nine Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in R.C.C. Lintels. FOR TWELVETH FLOOR

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

Rupees Six Thousand Two

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

107 4.00 CMT 6239.99 Hundred Thirty Nine And Paise

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing &

Ninety Nine Only

Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in R.C.C. Lintel Bend. FOR GROUND FLOOR

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

Rupees Six Thousand Two

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

108 9.00 CMT 6279.84 Hundred Seventy Nine And Paise

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing &

Eighty Four Only

Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in R.C.C. Lintel Bend. FOR FIRST FLOOR

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

Rupees Six Thousand Three

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

109 13.00 CMT 6319.69 Hundred Nineteen And Paise Sixty

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing &

Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in R.C.C. Lintel Bend. FOR SECOND FLOOR

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

Rupees Six Thousand Three

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

110 13.00 CMT 6359.54 Hundred Fifty Nine And Paise Fifty

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing &

Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in R.C.C. Lintel Bend. FOR THIRD FLOOR

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

Rupees Six Thousand Three

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

111 13.00 CMT 6399.39 Hundred Ninety Nine And Paise

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing &

Thirty Nine Only

Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in R.C.C. Lintel Bend. FOR FOURTH FLOOR

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

Rupees Six Thousand Four

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

112 13.00 CMT 6439.24 Hundred Thirty Nine And Paise

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing &

Twenty Four Only

Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in R.C.C. Lintel Bend. FOR FIFTH FLOOR

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

Rupees Six Thousand Four

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

113 13.00 CMT 6479.09 Hundred Seventy Nine And Paise

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing &

Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in R.C.C. Lintel Bend. FOR SIXTH FLOOR

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

Rupees Six Thousand Five

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

114 13.00 CMT 6518.94 Hundred Eighteen And Paise

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing &

Ninety Four Only

Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in R.C.C. Lintel Bend. FOR SEVENTH FLOOR

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

Rupees Six Thousand Five

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

115 13.00 CMT 6558.79 Hundred Fifty Eight And Paise

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing &

Seventy Nine Only

Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in R.C.C. Lintel Bend. FOR EIGHT FLOOR

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

Rupees Six Thousand Five

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

116 13.00 CMT 6598.64 Hundred Ninety Eight And Paise

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing &

Sixty Four Only

Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in R.C.C. Lintel Bend. FOR NINETH FLOOR

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

Rupees Six Thousand Six Hundred

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

117 13.00 CMT 6638.49 Thirty Eight And Paise Forty Nine

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing &

Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in R.C.C. Lintel Bend. FOR TENTH FLOOR

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

Rupees Six Thousand Six Hundred

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

118 13.00 CMT 6678.34 Seventy Eight And Paise Thirty

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing &

Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in R.C.C. Lintel Bend. FOR ELEVENTH FLOOR

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

Rupees Six Thousand Seven

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

119 3.00 CMT 6718.19 Hundred Eighteen And Paise

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing &

Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in R.C.C. Lintel Bend. FOR TWELVE FLOOR

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

Rupees Six Thousand Seven

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

120 2.00 CMT 6758.04 Hundred Fifty Eight And Paise

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing &

Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in R.C.C. Lintel Bend. FOR THIRTEENTH FLOOR

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing &

Rupees Nine Thousand Eight

Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

121 89.00 CMT 9845.15 Hundred Forty Five And Paise

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) M-250 for reinforced conerete CHHAJJAS for any thickness including finishing the

exposed surface with cement mortar 1:3 ( 1 cement : 3 fine sand) to give a smooth surface FOR ALL

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of Rupees Seven Thousand Three

122 plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing & 120.00 CMT 7357.19 Hundred Fifty Seven And Paise

Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, Nineteen Only

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in STAIRCASE FOR All Floors.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere

work , using cement content as per approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for up to any lead having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including the cost of with (formwork of

Rupees Fifteen Thousand Three

plywood only with fair finish & proping must be of steel only so as to give a fair finish). Providing &

123 34.00 CMT 15303.66 Hundred Three And Paise Sixty Six

Mixing admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash But Excluding Cost Of Reinforcement (Min cement level as per latest IS

shall be maintained) in VERTICAL AND HORIZONTAL FINS / PADADI FOR TERRACE FLOOR

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing and laying in position Ready Mixed M-300 grade concrete for reinforced cement conctere work

, using cement content as per approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying & finishing, Including providing formwork with

sheating steel sheets and the cost of centering shuttering, Providing & Mixing admixtures in Rupees Eight Thousand One

124 recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability 26.00 CMT 8146.91 Hundred Forty Six And Paise

without impairing strength and durability as per direction of the Engineer - in - charge. Without Fly Ash Ninety One Only

But Excluding Cost Of Reinforcement (Min cement level as per latest IS 456 shall be maintained) in

VARTICAL & HORIZONTAL FINS / PADADI for G.F. (One Side Shuttering for Sump Wall)

Providing T.M.T, FE - 500D Bar Reinfor Cement for R.C.C.work including cutting, bending, binding and

placing in position etc.complete for All Floors. (Brand as approved by GSPHC) Rupees Eighty And Paise Sixty

BRICK work masonary in common brunt clay building bricks having crusing strength NOt less than 35 Rupees Three Thousand Nine

126 kg./sq.cm.in cement mortar 1:6 (1 cement : 6 coarse sand ) (conventional bricks FOR FOUNDATION& 92.00 CMT 3981.21 Hundred Eighty One And Paise

PLINTH Twenty One Only

BRICK work masonary in common brunt clay building bricks having crusing strength NOt less than 35 Rupees Four Thousand Two

127 kg./sq.cm.in cement mortar 1:6 (1 cement : 6 coarse sand ) (conventional bricks FOR GROUND 18.00 CMT 4253.46 Hundred Fifty Three And Paise

FLOOR Forty Six Only

Providing and Laying Autoclaved Aerated Fly sand based cement concrete (AAC) masonry blocks

confirming to IS 2185 (Part 3) having compressive strength not less than 4.0 N/mm2 (heavy strength)

and jointed with block jointing adhesive mortar having tensile strength of not less than 0.8 N/mm2 and Rupees Five Thousand Nine

128 ensuring long lasting thermal insulation according to European norms (EN13501-2) suitable for high 43.00 CMT 5990.42 Hundred Ninety And Paise Forty

performance of external & internal concrete masonry walls, joint having thickness in thin layer of 3 mm to Two Only

4 mm between masonry units. Masonry blocks need not to pre-wetthe blocks or post cure the wall with

water. FOR GROUND FLOOR

Providing and Laying Autoclaved Aerated Fly sand based cement concrete (AAC) masonry blocks

confirming to IS 2185 (Part 3) having compressive strength not less than 4.0 N/mm2 (heavy strength)

and jointed with block jointing adhesive mortar having tensile strength of not less than 0.8 N/mm2 and

Rupees Six Thousand Thirty And

129 ensuring long lasting thermal insulation according to European norms (EN13501-2) suitable for high 92.00 CMT 6030.21

Paise Twenty One Only

performance of external & internal concrete masonry walls, joint having thickness in thin layer of 3 mm to

4 mm between masonry units. Masonry blocks need not to pre-wetthe blocks or post cure the wall with

water. FOR FIRST FLOOR

Providing and Laying Autoclaved Aerated Fly sand based cement concrete (AAC) masonry blocks

confirming to IS 2185 (Part 3) having compressive strength not less than 4.0 N/mm2 (heavy strength)

and jointed with block jointing adhesive mortar having tensile strength of not less than 0.8 N/mm2 and

Rupees Six Thousand Seventy

130 ensuring long lasting thermal insulation according to European norms (EN13501-2) suitable for high 111.00 CMT 6070.00

performance of external & internal concrete masonry walls, joint having thickness in thin layer of 3 mm to

4 mm between masonry units. Masonry blocks need not to pre-wetthe blocks or post cure the wall with

water. FOR SECOND FLOOR

Providing and Laying Autoclaved Aerated Fly sand based cement concrete (AAC) masonry blocks

confirming to IS 2185 (Part 3) having compressive strength not less than 4.0 N/mm2 (heavy strength)

and jointed with block jointing adhesive mortar having tensile strength of not less than 0.8 N/mm2 and Rupees Six Thousand One

131 ensuring long lasting thermal insulation according to European norms (EN13501-2) suitable for high 111.00 CMT 6109.79 Hundred Nine And Paise Seventy

performance of external & internal concrete masonry walls, joint having thickness in thin layer of 3 mm to Nine Only

4 mm between masonry units. Masonry blocks need not to pre-wetthe blocks or post cure the wall with

water. FOR THIRD FLOOR

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing and Laying Autoclaved Aerated Fly sand based cement concrete (AAC) masonry blocks

confirming to IS 2185 (Part 3) having compressive strength not less than 4.0 N/mm2 (heavy strength)

and jointed with block jointing adhesive mortar having tensile strength of not less than 0.8 N/mm2 and Rupees Six Thousand One

132 ensuring long lasting thermal insulation according to European norms (EN13501-2) suitable for high 111.00 CMT 6149.58 Hundred Forty Nine And Paise

performance of external & internal concrete masonry walls, joint having thickness in thin layer of 3 mm to Fifty Eight Only

4 mm between masonry units. Masonry blocks need not to pre-wetthe blocks or post cure the wall with

water. FOR FOURTH FLOOR

Providing and Laying Autoclaved Aerated Fly sand based cement concrete (AAC) masonry blocks

confirming to IS 2185 (Part 3) having compressive strength not less than 4.0 N/mm2 (heavy strength)

and jointed with block jointing adhesive mortar having tensile strength of not less than 0.8 N/mm2 and Rupees Six Thousand One

133 ensuring long lasting thermal insulation according to European norms (EN13501-2) suitable for high 111.00 CMT 6189.37 Hundred Eighty Nine And Paise

performance of external & internal concrete masonry walls, joint having thickness in thin layer of 3 mm to Thirty Seven Only

4 mm between masonry units. Masonry blocks need not to pre-wetthe blocks or post cure the wall with

water. FOR FIFTH FLOOR

Providing and Laying Autoclaved Aerated Fly sand based cement concrete (AAC) masonry blocks

confirming to IS 2185 (Part 3) having compressive strength not less than 4.0 N/mm2 (heavy strength)

and jointed with block jointing adhesive mortar having tensile strength of not less than 0.8 N/mm2 and Rupees Six Thousand Two

134 ensuring long lasting thermal insulation according to European norms (EN13501-2) suitable for high 111.00 CMT 6229.16 Hundred Twenty Nine And Paise

performance of external & internal concrete masonry walls, joint having thickness in thin layer of 3 mm to Sixteen Only

4 mm between masonry units. Masonry blocks need not to pre-wetthe blocks or post cure the wall with

water. FOR SIXTH FLOOR

Providing and Laying Autoclaved Aerated Fly sand based cement concrete (AAC) masonry blocks

confirming to IS 2185 (Part 3) having compressive strength not less than 4.0 N/mm2 (heavy strength)

and jointed with block jointing adhesive mortar having tensile strength of not less than 0.8 N/mm2 and Rupees Six Thousand Two

135 ensuring long lasting thermal insulation according to European norms (EN13501-2) suitable for high 111.00 CMT 6268.95 Hundred Sixty Eight And Paise

performance of external & internal concrete masonry walls, joint having thickness in thin layer of 3 mm to Ninety Five Only

4 mm between masonry units. Masonry blocks need not to pre-wetthe blocks or post cure the wall with

water. FOR SEVENTH FLOOR

Providing and Laying Autoclaved Aerated Fly sand based cement concrete (AAC) masonry blocks

confirming to IS 2185 (Part 3) having compressive strength not less than 4.0 N/mm2 (heavy strength)

and jointed with block jointing adhesive mortar having tensile strength of not less than 0.8 N/mm2 and Rupees Six Thousand Three

136 ensuring long lasting thermal insulation according to European norms (EN13501-2) suitable for high 111.00 CMT 6308.74 Hundred Eight And Paise Seventy

performance of external & internal concrete masonry walls, joint having thickness in thin layer of 3 mm to Four Only

4 mm between masonry units. Masonry blocks need not to pre-wetthe blocks or post cure the wall with

water. FOR EIGHTH FLOOR

Providing and Laying Autoclaved Aerated Fly sand based cement concrete (AAC) masonry blocks

confirming to IS 2185 (Part 3) having compressive strength not less than 4.0 N/mm2 (heavy strength)

and jointed with block jointing adhesive mortar having tensile strength of not less than 0.8 N/mm2 and Rupees Six Thousand Three

137 ensuring long lasting thermal insulation according to European norms (EN13501-2) suitable for high 111.00 CMT 6348.53 Hundred Forty Eight And Paise

performance of external & internal concrete masonry walls, joint having thickness in thin layer of 3 mm to Fifty Three Only

4 mm between masonry units. Masonry blocks need not to pre-wetthe blocks or post cure the wall with

water. FOR NINTH FLOOR

Providing and Laying Autoclaved Aerated Fly sand based cement concrete (AAC) masonry blocks

confirming to IS 2185 (Part 3) having compressive strength not less than 4.0 N/mm2 (heavy strength)

and jointed with block jointing adhesive mortar having tensile strength of not less than 0.8 N/mm2 and Rupees Six Thousand Three

138 ensuring long lasting thermal insulation according to European norms (EN13501-2) suitable for high 111.00 CMT 6388.32 Hundred Eighty Eight And Paise

performance of external & internal concrete masonry walls, joint having thickness in thin layer of 3 mm to Thirty Two Only

4 mm between masonry units. Masonry blocks need not to pre-wetthe blocks or post cure the wall with

water. FOR TENTH FLOOR

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing and Laying Autoclaved Aerated Fly sand based cement concrete (AAC) masonry blocks

confirming to IS 2185 (Part 3) having compressive strength not less than 4.0 N/mm2 (heavy strength)

and jointed with block jointing adhesive mortar having tensile strength of not less than 0.8 N/mm2 and Rupees Six Thousand Four

139 ensuring long lasting thermal insulation according to European norms (EN13501-2) suitable for high 111.00 CMT 6428.11 Hundred Twenty Eight And Paise

performance of external & internal concrete masonry walls, joint having thickness in thin layer of 3 mm to Eleven Only

4 mm between masonry units. Masonry blocks need not to pre-wetthe blocks or post cure the wall with

water. FOR ELEVENTH FLOOR

Providing and Laying Autoclaved Aerated Fly sand based cement concrete (AAC) masonry blocks

confirming to IS 2185 (Part 3) having compressive strength not less than 4.0 N/mm2 (heavy strength)

and jointed with block jointing adhesive mortar having tensile strength of not less than 0.8 N/mm2 and Rupees Six Thousand Four

140 ensuring long lasting thermal insulation according to European norms (EN13501-2) suitable for high 39.00 CMT 6467.90 Hundred Sixty Seven And Paise

performance of external & internal concrete masonry walls, joint having thickness in thin layer of 3 mm to Ninety Only

4 mm between masonry units. Masonry blocks need not to pre-wetthe blocks or post cure the wall with

water. FOR TWELVETH FLOOR

Providing and Laying Autoclaved Aerated Fly sand based cement concrete (AAC) masonry blocks

confirming to IS 2185 (Part 3) having compressive strength not less than 4.0 N/mm2 (heavy strength)

and jointed with block jointing adhesive mortar having tensile strength of not less than 0.8 N/mm2 and Rupees Six Thousand Five

141 ensuring long lasting thermal insulation according to European norms (EN13501-2) suitable for high 15.00 CMT 6507.69 Hundred Seven And Paise Sixty

performance of external & internal concrete masonry walls, joint having thickness in thin layer of 3 mm to Nine Only

4 mm between masonry units. Masonry blocks need not to pre-wetthe blocks or post cure the wall with

water. FOR THIRTEENTH FLOOR

Provinding 10 mm thick cement PLASTER in single coat on CEILING for interior plastering and

Rupees One Hundred Ninety Nine

142 finished even and smooth in C.M. 1:3 ( 1 cement : 3 sand ) including finishing with floating coat of neat 887.00 SMT 199.88

And Paise Eighty Eight Only

cement at Ground Floor.

Provinding 10 mm thick cement PLASTER in single coat on CEILING for interior plastering and

Rupees Two Hundred Twenty Five

143 finished even and smooth in C.M. 1:3 ( 1 cement : 3 sand ) including finishing with floating coat of neat 802.00 SMT 225.69

And Paise Sixty Nine Only

cement at FIRST Floor.

Provinding 10 mm thick cement PLASTER in single coat on CEILING for interior plastering and

Rupees Two Hundred Fifty One

144 finished even and smooth in C.M. 1:3 ( 1 cement : 3 coarse sand ) including finishing with floating coat of 716.00 SMT 251.50

And Paise Fifty Only

neat cement at SECOND Floor.

Provinding 10 mm thick cement PLASTER in single coat on CEILING for interior plastering and

Rupees Two Hundred Seventy

145 finished even and smooth in C.M. 1:3 ( 1 cement : 3 coarse sand ) including finishing with floating coat of 716.00 SMT 277.31

Seven And Paise Thirty One Only

neat cement at THIRD Floor.

Provinding 10 mm thick cement PLASTER in single coat on CEILING for interior plastering and

Rupees Three Hundred Three And

146 finished even and smooth in C.M. 1:3 ( 1 cement : 3 sand ) including finishing with floating coat of neat 716.00 SMT 303.12

Paise Twelve Only

cement at FOURTH Floor.

Provinding 10 mm thick cement PLASTER in single coat on CEILING for interior plastering and

Rupees Three Hundred Twenty

147 finished even and smooth in C.M. 1:3 ( 1 cement : 3 sand ) including finishing with floating coat of neat 716.00 SMT 328.93

Eight And Paise Ninety Three Only

cement at FIFTH Floor.

Provinding 10 mm thick cement PLASTER in single coat on CEILING for interior plastering and

Rupees Three Hundred Fifty Four

148 finished even and smooth in C.M. 1:3 ( 1 cement :3 coarse sand ) including finishing with floating coat of 716.00 SMT 354.74

And Paise Seventy Four Only

neat cement at SIXTH Floor.

Provinding 10 mm thick cement PLASTER in single coat on CEILING for interior plastering and

Rupees Three Hundred Eighty And

149 finished even and smooth in C.M. 1:3 ( 1 cement : 3 coarse sand ) including finishing with floating coat of 716.00 SMT 380.55

Paise Fifty Five Only

neat cement at SEVEN Floor.

Provinding 10 mm thick cement PLASTER in single coat on CEILING for interior plastering and

Rupees Four Hundred Six And

150 finished even and smooth in C.M. 1:3 ( 1 cement : 3 sand ) including finishing with floating coat of neat 716.00 SMT 406.36

Paise Thirty Six Only

cement at EIGHTH Floor.

Provinding 10 mm thick cement PLASTER in single coat on CEILING for interior plastering and

Rupees Four Hundred Thirty Two

151 finished even and smooth in C.M. 1:3 ( 1 cement : 3 sand ) including finishing with floating coat of neat 716.00 SMT 432.17

And Paise Seventeen Only

cement at NINE Floor.

Provinding 10 mm thick cement PLASTER in single coat on CEILING for interior plastering and

Rupees Four Hundred Fifty Seven

152 finished even and smooth in C.M. 1:3 ( 1 cement :3 coarse sand ) including finishing with floating coat of 716.00 SMT 457.98

And Paise Ninety Eight Only

neat cement at TEN Floor.

Provinding 10 mm thick cement PLASTER in single coat on CEILING for interior plastering and Rupees Four Hundred Eighty

153 finished even and smooth in C.M. 1:3 ( 1 cement : 3 coarse sand ) including finishing with floating coat of 716.00 SMT 483.79 Three And Paise Seventy Nine

neat cement at ELEVEN Floor. Only

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Provinding 10 mm thick cement PLASTER in single coat on CEILING for interior plastering and

Rupees Five Hundred Nine And

154 finished even and smooth in C.M. 1:3 ( 1 cement : 3 sand ) including finishing with floating coat of neat 151.00 SMT 509.60

Paise Sixty Only

cement at TWELVE Floor.

Provinding 10 mm thick cement PLASTER in single coat on CEILING for interior plastering and

Rupees Five Hundred Thirty Five

155 finished even and smooth in C.M. 1:3 ( 1 cement : 3 sand ) including finishing with floating coat of neat 101.00 SMT 535.41

And Paise Forty One Only

cement atTHIRTEENTHFloor.

Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE wall for interior

Rupees Two Hundred Three And

156 plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including finishing with floating 1928.00 SMT 203.34

Paise Thirty Four Only

coat of neat cement slurry at GROUND FLOOR.

Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE wall for interior

Rupees Two Hundred Thirty One

157 plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including finishing with floating 1396.00 SMT 231.20

And Paise Twenty Only

coat of neat cement slurry at FIRST FLOOR.

Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE wall for interior

Rupees Two Hundred Fifty Nine

158 plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 coarse sand ) including finishing with 2146.00 SMT 259.06

And Paise Six Only

floating coat of neat cement slurry at SECOND FLOOR.

Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE wall for interior

Rupees Two Hundred Eighty Six

159 plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 coarse sand ) including finishing with 2146.00 SMT 286.92

And Paise Ninety Two Only

floating coat of neat cement slurry at THIRD FLOOR .

Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE wall for interior

Rupees Three Hundred Fourteen

160 plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including finishing with floating 2146.00 SMT 314.78

And Paise Seventy Eight Only

coat of neat cement slurry at FOURTHFLOOR.

Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE wall for interior

Rupees Three Hundred Forty Two

161 plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including finishing with floating 2146.00 SMT 342.64

And Paise Sixty Four Only

coat of neat cement slurry at FIFTH FLOOR.

Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE wall for interior

Rupees Three Hundred Seventy

162 plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 coarse sand ) including finishing with 2146.00 SMT 370.50

And Paise Fifty Only

floating coat of neat cement slurry at SIXTH FLOOR.

Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE wall for interior

Rupees Three Hundred Ninety

163 plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 coarse sand ) including finishing with 2146.00 SMT 398.36

Eight And Paise Thirty Six Only

floating coat of neat cement slurry at SEVEN FLOOR .

Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE wall for interior

Rupees Four Hundred Twenty Six

164 plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including finishing with floating 2146.00 SMT 426.22

And Paise Twenty Two Only

coat of neat cement slurry at EIGHTH FLOOR.

Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE wall for interior

Rupees Four Hundred Fifty Four

165 plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including finishing with floating 2146.00 SMT 454.08

And Paise Eight Only

coat of neat cement slurry at NINE FLOOR.

Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE wall for interior

Rupees Four Hundred Eighty One

166 plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 coarse sand ) including finishing with 2146.00 SMT 481.94

And Paise Ninety Four Only

floating coat of neat cement slurry at TEN FLOOR.

Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE wall for interior

Rupees Five Hundred Nine And

167 plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 coarse sand ) including finishing with 2146.00 SMT 509.80

Paise Eighty Only

floating coat of neat cement slurry at ELEVEN FLOOR .

Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE wall for interior

Rupees Five Hundred Thirty Seven

168 plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including finishing with floating 369.00 SMT 537.66

And Paise Sixty Six Only

coat of neat cement slurry at TWELVE FLOOR.

Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE wall for interior

Rupees Five Hundred Sixty Five

169 plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including finishing with floating 82.00 SMT 565.52

And Paise Fifty Two Only

coat of neat cement slurry at TWELVE FLOOR.

Synthetic Texture Plaster with Double Coat Smooth plaster : Providing 20mm thick cement plaster in

single coat plastering upto for Outside and finished even and smooth in (i) Cement mortar 1:3 (1-cement

: 3-sand) as Base Coat and providing 2-3 mm thick synthetic texture plaster of approved texture

Rupees Six Hundred Two And

170 including cost of all rate are materials, labour, conveyance, loading and unloading, taxes, royalties, 9440.00 SMT 602.22

Paise Twenty Two Only

scaffolding, watering etc.complete for any Height as per Drawing and instructions of Engineer -in -

Charge.(Material Shall be Used as Approved By GSPHCL Only )

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing 10 mm thick CEMENT PLASTER in single coat interior plastering and finished even and

smooth in cement mortar (1:3) (1 Cement : 3 sand) and finishing with a floating coat of neat cement

slurry including providing and mixing WATER PROOFING material in Cement Mortar in proportion

Rupees One Hundred Eighty Three

171 recommended by the manufacturers foundation & plinth. Including finishing with a floating coat of neat 93.00 SMT 183.13

And Paise Thirteen Only

cement slurry. Cement mortar shall be prepared in cement mixter machine only. Water Proofing

compound shall be as per directed by Engineer in charge. Rates are inclusive for ground floors.FOR

Provinding 10 mm thick cement PLASTER in single coat of interior plastering and finished even and

smooth in cement mortar 1:3 ( 1 cement : 3 sand ) and finishing with floating coat of neat cement slurry

Rupees Three Hundred Fifty And

172 including providing and mixing WATER PROFFING material in C.M in proportion recomended by the 1679.00 SMT 350.29

Paise Twenty Nine Only

manufacturer including finishing with a flaoting coat of neat cement slurry. FOR ALL FLOOR

Providing & laying acrylic based modified cementitious composite coating system in two coats.1st coat

Rupees One Hundred Ten And

173 shall be acrylic polymer & cement & second coat shall be of acrylic polymer ,cement & silica sand.The 1679.00 SMT 110.70

Paise Seventy Only

application of both the coats shall be as per manufacturer's manual.

Providing and filling light weight filling material (CINDER) an approved in sunk slabs or as may be Rupees Seven Hundred Ninety One

directed at all floors including watering, consolidation etc.. Complete. And Paise Sixty Eight Only

Providing CEMENT VATA ( 10cm x 10cm )size quarter round in cement mortar 1 : 1 including neat Rupees Twenty Three And Paise

cement finishing, watering etc. Complete. Forty Five Only

Providing & laying Cement Concrete flooring 1:2:4 (1- cement 2; sand 4- M/c graded stone aggregate of

Rupees Three Hundred Forty Eight

176 20 mm nominal size) laid in one layer finished with a floating coat of neat cement (B) 50mm thick. 790.00 SMT 348.08

And Paise Eight Only

Providing, Supplying and Fixing of 32mm (Total) Thick Single Flush Door Shutter with 1mm Thick

Laminates on Both Side of Shutter. Making / Construction of Flush Door is with Pine or southern Yellow

Pine Filler and 2.5mm core veneer Both Side and 0.4mm Face Veneer on Both Side with Lock rail on

Center. Flush Door Provide with Teak wood beading patti (32mm X 12mm) on Peripheries of Flush Door

with Door Frame of Non Teak Solid Wood of size 120mm x 65mm with Chemically Treated and

Rupees Eight Thousand Nine

Seasoned Including Paint Matching with Laminates. Frame & Flush door shutter having 5 year warranty

53.00 SMT 8976.41 Hundred Seventy Six And Paise

against attack of biological agent like termite, borers, decay, fungi and harmful insects also warranty

against seasoning related issues like crack, bending, twisting, warping. Laminates on shutter shall be

press by cold press method. Shutter shall be brought to site in packed PVC bags & pvc coating shall be

removed on completion of work in such a way that shutter & Frame is free from nail mark & any damages

Rates are also Inclusive of all Labors & Proviging 15cm. Long 6 No of Hold Fast (25mm X 5mm) & 3 No

of 6 Inch S.S. but Hinges, 100mm x 75 mm x 3mm thick, required Screw & Nails per Frame and Fixing

following S.S. Fixtures And Fastening.

(1) Aldrops 1 No, 250mm x 16mm & Tadi 1 No, (2) Door Stopper 1 No, 100mm Long, (3) Double Leg

Heavy Push Door Stopper 1 No & (4) Handle 2 No, 150mm Long X 10mm thick. Door are Fixing as per

Details Drawing & Instruction of Engineer in charge. All Materials Used Shall be as Per approved

Material Make List of G.S.P.H.C. The Required Frame is to be Obtained from Vanil Udhyog Maked Only.

Providing, Supplying and Fixing of 32mm (Total) Thick Double Flush Door Shutter with 1mm Thick

Laminates on Both Side of Shutter. Making / Construction of Flush Door is with Pine or southern Yellow

Pine Filler and 2.5mm core veneer Both Side and 0.4mm Face Veneer on Both Side with Lock rail on

Center. Flush Door Provide with Teak wood beading patti (32mm X 12mm) on Peripheries of Flush Door

with Door Frame of Non Teak Solid Wood of size 150mm x 70mm with Chemically Treated and

Rupees Twelve Thousand Eight

Seasoned Including Paint Matching with Laminates. Frame & Flush door shutter having 5 year warranty

7.00 SMT 12870.01 Hundred Seventy And Paise One

against attack of biological agent like termite, borers, decay, fungi and harmful insects also warranty

against seasoning related issues like crack, bending, twisting, warping. Laminates on shutter shall be

press by cold press method. Shutter shall be brought to site in packed PVC bags & pvc coating shall be

removed on completion of work in such a way that shutter & Frame is free from nail mark & any damages

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Rates are also Inclusive of all Labors & Proviging 15cm. Long 8 No of Hold Fast (25mm X 5mm) & 8 No

of 6 Inch S.S. but Hinges, 100mm x 75 mm x 3mm thick, required Screw & Nails per Frame and Fixing

6mm thick Glass on Top of Door Frame with Battens Patti, following S.S. Fixtures And Fastening.

(1) Aldrops 2 No, 250mm x 16mm, (2) Door Stopper 2 No, 100mm Long, (3) Double Leg Heavy Push

Door Stopper 2 No & (4) Handle 4 No, 150mm Long X 10mm thick. Door with Glass are Fixing as per

Details Drawing & Instruction of Engineer in charge. All Materials Used Shall be as Per approved

Material Make List of G.S.P.H.C. The Required Frame is to be Obtained from Vanil Udhyog Maked Only.

Providing, Supplying and Fixing of 32mm (Total) Thick Single Flush Door Shutter with 1mm Thick

Laminates on Both Side of Shutter. Making / Construction of Flush Door is with Pine or southern Yellow

Pine Filler and 2.5mm core veneer Both Side and 0.4mm Face Veneer on Both Side with Lock rail on

Center. Flush Door Provide with Teak wood beading patti (32mm X 12mm) on Peripheries of Flush Door

with Door Frame of Non Teak Solid Wood of size 100mm x 60mm with Chemically Treated and

Rupees Eight Thousand Three

Seasoned Including Paint Matching with Laminates. Frame & Flush door shutter having 5 year warranty

438.00 SMT 8399.74 Hundred Ninety Nine And Paise

against attack of biological agent like termite, borers, decay, fungi and harmful insects also warranty

Seventy Four Only

against seasoning related issues like crack, bending, twisting, warping. Laminates on shutter shall be

press by cold press method. Shutter shall be brought to site in packed PVC bags & pvc coating shall be

removed on completion of work in such a way that shutter & Frame is free from nail mark & any damages

Rates are also Inclusive of all Labors & Proviging 15cm. Long 8 No of Hold Fast (25mm X 5mm) & 4 No

of 6 Inch S.S. but Hinges, 100mm x 75 mm x 3mm thick, required Screw & Nails per Frame and Fixing

following S.S. Fixtures And Fastening.

(1) Aldrops 1 No, 250mm x 16mm & Tadi 1 No, (2) Door Stopper 1 No, 100mm Long, (3) Double Leg

Heavy Push Door Stopper 1 No & (4) Handle 2 No, 150mm Long X 10mm thick. Door are Fixing as per

Details Drawing & Instruction of Engineer in charge. All Materials Used Shall be as Per approved

Material Make List of G.S.P.H.C. The Required Frame is to be Obtained from Vanil Udhyog Maked Only.

Providing and fixing solid PVC Flush Door shutter 24mm thick,made from Co-extruded three layer rigid

PVC foam sheet(single Extruded) with density not less than 600kg/cbm outer layer (0.8-1mm)thick

should be rigid PVC with density of not less than 1400kg/cbm.WPC Door frame upper patti of 24mm X

6mm size. Door should be water proof,Termite proof ,fire retardant&having good screw holding Rupees Four Thousand Five

capacity.proviidng and fixing 100% Solid Wood Plastic composite(WPC) Door Frame 90mmx45mm Hundred Thirteen Only

made from wood plastic composite(single Extruded Process)material with density 780kg/cbm .all as per

specifications drawing as directed by the engineer in charge.

Providing and fixing extrutded Domal Alluminium section window having extrutded alluminium colour

anodized secdtion frame, horizontal Three track member size 79.9mm x 45mm x 1.2mm (Section series

no: 27 x 65, @ Wt. 1.12kg/mt), Vertical member of size 79.9mm x 45mm x 1.2mm (Section @ Wt.

1.12kg/mt) with sliding shutter of horizontal member size 65.1mm x 27mm x 1.2mm (Section @Wt. Rupees Four Thousand Nine

181 0.655kg/mt) Vertical member of size 65.1mm x 27mmx 1.2mm (Section @ Wt. 0.655kg/mt) with 5mm 991.00 SMT 4985.25 Hundred Eighty Five And Paise

thick transparent bronze colour tinted float glass with powder coated alluminium fitting and Fixtures and Twenty Five Only

transparent silicon sealent glass fixing to frame as per details etc. completed for window Including one

mosquitoe jali shutter with both side Locking Arrangment. (Make Jindal)

Providing and fixing Alluminium section window having extruded Aluminum Colour anodized section 3.00 SMT

frame, horizontal Three track member size 92mm x 31.75mm x 1.30mm,@ Wt. 1.07 Kg/mt), vertical

member of size 92mm x 31.75mm x 1.50mm ,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal

Rupees One Thousand Five

member size 40 mmx18mm x1.29mm ,@ wtof 0.456 Kg/mt), vertical member of size 40mm x 18mm x

182 Hundred Sixty Eight And Paise

1.29 mm ,@ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float glass with powder

Twenty Seven Only

coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details

including one mosquitoe jali shutter With Both Side Locking Arrangment.

Providing and fixing standard extruded of alluminium section of size 63 * 38.10 * 1.2 mm,@Wt 0.643 Rupees One Thousand One

183 Kg/RMT )with colour aNOdized alluminium frame for ventilation with 5 mm thick frosted glass as details 47.00 SMT 1163.92 Hundred Sixty Three And Paise

etc complete FOR VENTILATION Ninety Two Only

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing & Laying integrated cement based proprietary water proofing treatment of required thickness

over the roof including 10mm thick cement mortar 1:3 and CHINA MOSAIC fitting and finally finishing the

surface with white cement slurry and sloping out terrace slabs withFollowing specification laid to required

slope not flatter than 1:80 ( the thickness of water proofing treatment near rainwater outlet or the lowest

point of the finished slope shell not to be less than 45 mm. Including treating the vertical surface of the

parapet wall up to 20 cm. height above finished level of terracing including finishing top with joint less

Rupees Eight Hundred Fifty Five

water proofing plaster curing testing etc, completed. Rate is Including 10 years performance of guarantee 838.00 SMT 855.11

And Paise Eleven Only

bond to be given on stamp paper ( no extra shall be paid for increase in thickness for proper slope ). (A)

Applying & grounting a slurry coat of neat cement using 2.75 kg/smt. of cement admixed with proprietary

water proofing compound confirming to IS 2645 and 10mm. Thick water proofing cement plaster in

cement mortar in 1:3.over the RCC slab including cleaning the surface before treatments.

(B) Laying cement concrete using broken brick bat

using 25 mm to 40 mm size with 50% of cement mortar 1:4 ( 1 cement : 4 corse sand )over 10mm. thick

water proofing cement plaster in cement mortar in 1:3 admixed

with proprietary water proofing compound conforming to IS 2645 required slope and treating similarly the

adjoining walls up to 200 mm height including rounding of

junction of walls.

(C) After two days of proper curing applying a second coat of cement slurry .

(D) Finishing the surface with china mosaic peices laid on 10 mm thick joint less cement mortar of mix

1:3 ( 1 cement : 3 sand) admixed with proprietary water proofing compound confirming to IS 2645 and

finally finishing the surface with trowel with neat cement slurry .

E) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for

curing for final test. All above operation to be done in order and as directed and specified by the engineer

Providingand laying 24" x24"Double Charge Vitrified Tiles 8 to10mm thick in Flooring over 20mm

(average) baseof cementmortar 1:6 ( 1cement: 6coarsesand) onnewsurfaceorfixingonexisting

Rupees One Thousand Four

flooringbyadhesiveincludingdismentalingofexistingflooringandmaterial jointedwithcolorcementslurry

185 6464.00 SMT 1440.20 Hundred Forty And Paise Twenty

including finised with flush pointing & cleaning the surface etc. complete for Light shade for all

floors.Material shall be used as approved by GSPHCL

Providingand laying 24" x24" Double Charge VitrifiedTiles 8 to10mm thick inSkirting over 10mm

(average) baseof cementmortar 1:3 ( 1cement: 3coarsesand) onnewsurfaceorfixingonexisting

Rupees One Thousand Three

flooringbyadhesiveincludingdismentalingofexistingflooringandmaterial jointedwithcolorcementslurry

186 598.00 SMT 1392.20 Hundred Ninety Two And Paise

including finised with flush pointing & cleaning the surface etc. complete for Light Shade for all

floors.Material shall be used as approved by GSPHCL

Providing and laying 25mm thick Machine cut Rough KOTA STONE SLAB FLOORING over 20mm

average thick base of cement mortar 1:6 ( 1 cement : 6 coarse sand) laid over & jointed with grey cement Rupees Seven Hundred Five And

slurry including rubbing & polishing etc. Complete. as Directed By Engineer In Charge for all Floors. Paise Thirty Nine Only

Providing and Laying Mirror Polished 25 mm thick Double Diamond Polished Kota Stone Flooring over

20mm thick base of cement mortar 1 : 6 (1-Cement : 6-Coarse Sand) laid over and jointed with grey

Rupees One Thousand Eighty One

188 cement slurry including Rubbing and Polishing etc. Complete. (A) 25mm Thick. In Green Colour. Rate 1129.00 SMT 1081.90

And Paise Ninety Only

Are Inclusive of Single Piece & Making 3 Line Groove and Moulding Of Outer edge as Directed By

Engineer In Charge.

Providing and Laying Mirror Polished 25 mm thick Double Diamond Polished SLAB in RISERS of steps, Rupees One Thousand Two

189 dedo , skirting and pilllars laid to 10 mm thick cement mortar 1:3 ( 1 cement : 3 coarse sand) & jointed 204.00 SMT 1275.10 Hundred Seventy Five And Paise

with grey cement slurry including rubbing & polishing etc Ten Only

Providing and laying Anti skid Ceramic tiles (Non Skiding) 8 mm to 10mm thick in Floorings, treads of

steps and landing laid on a bed of 20 mm thick cement mortar 1:3 (1 - cement: 3- coarse sand) finished Rupees Nine Hundred Sixty And

with flush pointing in the colour as specified etc. complete in white cement for All Floors. Size and shade Paise Forty Seven Only

shall be as per the instruction of Engineer - In - Charge.

Providing and laying Ceramic tiles 8 mm to 10mm thick in skirting, risers of steps and DADO on 10mm

thick cement mortar 1:3 (1-cement: 3 coarse sand) finished with flush pointing in the colour as specified Rupees One Thousand Twenty

etc. complete in white cement for All Floors. Size and shade shall be as per the instruction of Engineer - Eight And Paise Eleven Only

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing and fixing both side polished machine cut KOTA STONE shelve/ partition 20mm to 25mm

thick embaded in to wall at support including racking and finishing smooth the surface including cutting Rupees Seven Hundred Ninety

the stone as and where required etc. complete including rounding of exposed edges etc. complete. Three And Paise Ninety Only

Providing and laying rubber flooring of size 480 mm x 480 mm having thickness 15 mm including the

Rupees Two Thousand One

cost of all labour,tools,other incidental expenses etc.necessary for completion of work as directed by the

193 311.00 SMT 2103.58 Hundred Three And Paise Fifty

ineer in charge. ( Including labour charges of Supply and Installation of Rubber flooring)

Providing and Fixing Granite Telephonic Black Colour 15 to 18 mm thick for jambs and sills of

doors & windows using neat cement slurry laid over 20 mm average base of cement mortar 1:1(1

cement:1 Coarse Sand) and jointed with grey cement slurry including racking(Tancha Work) rubbing and Rupees Two Thousand Four

polishing,scaffoldings,tools and tackles,scaffolding etc. complete(with base of neat cement) as per Hundred Twenty Eight Only

direction of Engineer in charge including rounding the exposed edges as directed.

Finishing Ceilling/Slop Surface with Plastic EmulsionPaint on Ceilling/Slop Surface(twocoats) to

givean required shap evenshadeafter throughl ybrushing the surface to removeall dirt and remainsof

loose powedermaterial etc. complete.Rateare inclusiveofapplyingtwocoat of lapy(Putty)andonecoat of

Rupees One Hundred Eighty Six

195 primer on new Ceilling/Slop Surface to givean devenshade including thoroughly brushing the surface free 9875.00 SMT 186.73

And Paise Seventy Three Only

from morta rdropping and other foreign matter and sand paperedsmooth.putty,primer&paints hallbeas per

approved list of GSPHCL

Finishing Wall with Plastic Emulsion Paint on Wall Surface (two coats) to give an required shap

even shade after throughly brushing the surface to remove all dirt and remains of loose poweder material

etc. complete. Rate are inclusive of applying two coat of lapy (Putty) and one coat of primer on new wall Rupees One Hundred Seventy Six

196 surface to give and even shade including thoroughly brushing the surface free from mortar dropping and 25189.00 SMT 176.33

And Paise Thirty Three Only

other foreign matter and sand papered smooth. putty , primer and paint make as per the approved list of

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) over and above

applying One Coat Of Primer to give an required shape even shade after thoroughly brushing the

Rupees One Hundred Forty Seven

197 surface to remove all dirt, and remains of loose powdered materials.etc complete. primer and paint make 9479.00 SMT 147.68

And Paise Sixty Eight Only

as per the approved list of GSPHCL

Providing & Fixing 15mm One way Bib Tap with Wall Flange. Rate are inclusive of all matreials, Labour

& Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction of Rupees Nine Hundred Ninety And

Engineer In charge. The Model & Make of Bib Tap Shall be as per the Approved Make List of GSPHCL. Paise Sixty One Only

Providing and fixing of Wall mixer with Wall Flange (With Seals), Button Assembly Sleeve & Buttonr,

Rupees Five Thousand Two

199 spout etc 124.00 NO 5251.00

Hundred Fifty One Only

complete the job , including cutting and making good the walls etc.

Providing & Fixing Two way Bib Tap with Wall Flange. Rate are inclusive of all matreials, Labour &

Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction of Rupees One Thousand Three

200 Engineer In charge. The Model & Make of Two way Bib Tap Shall be as per the Approved Make List of 105.00 NO 1309.39 Hundred Nine And Paise Thirty

GSPHCL. Nine Only

Providing & Fixing Health Faucets (ABS Body). Rate are inclusive of all matreials, Labour & Necessary

Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer In

Rupees Five Hundred Sixty Five

201 charge. The Model & Make of Health Faucets Shall be as per the Approved Make List of GSPHCL. 105.00 NO 565.51

And Paise Fifty One Only

Providing and laying G.I.RAIN WATER SPOUT of 50 mm dia and 0.30 m length. Rupees One Hundred And Paise

Providing & Fixing Single Hole Wash Basin with C.I or M.S. brackete & M. I. fisher union, P.V.C water

pipe with Connection from Stop Cock to Pillar Tap, PVC Bottle Trap with Connection 32mm dia. C.P.

brassa waste coupling etc. Complete. Rate are inclusive of all matreials, Labour & Necessary Fittings Rupees Three Thousand Nine

203 etc. Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. 85.00 NO 3935.33 Hundred Thirty Five And Paise

The Model & Make of Wash Basin Shall be as per the Approved Make List of GSPHCL. including pillar Thirty Three Only

cock, angel cock, bottale trap

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing & Fixing Single Hole Table Top Wash Basin on Granite Slab with C.I or M.S. brackete & M. I

. fisher union, P.V.C water pipe with Connection from Stop Cock to Pillar Tap, PVC Bottle Trap with

Connection 32mm

Rupees Three Thousand Three

dia. C.P. brassa waste coupling etc. Complete. Rate are inclusive of all materials, Labour & Necessary

204 20.00 NO 3326.94 Hundred Twenty Six And Paise

Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer In

Ninety Four Only

charge. The Model & Make of Table Top Wash Basin Shall be as per the Approved Make List of

Provinding and fixing 600mm x 450mm bevelled edge MIRROR or superior glass mounted on 6mm

Rupees Eight Hundred Twenty Five

205 thick A.C. sheet of plywood sheet fixed to wooden plugs with C.P. brass screws & washers. 105.00 NO. 825.48

And Paise Forty Eight Only

Providing & Fixing Towel Ring. Rate are inclusive of all matreials, Labour & Necessary Fittings etc.

Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. The Rupees Nine Hundred Nine And

Model & Make of Towel Ring Shall be as per the Approved Make List of GSPHCL Paise Eight Only

Providing & Fixing Towel Rod. Rate are inclusive of all matreials, Labour & Necessary Fittings etc.

Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. The Rupees One Thousand Seventy

Model & Make of Towel Rod Shall be as per the Approved Make List of GSPHCL. Eight And Paise Seventy Only

Providing & Fixing Towel Rack. Rate are inclusive of all matreials, Labour & Necessary Fittings etc.

Rupees Three Thousand Three

Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. The

208 105.00 NO 3343.63 Hundred Forty Three And Paise

Model & Make of Towel Rack Shall be as per the Approved Make List of GSPHCL.

Sixty Three Only

providing and fixing SS cloth HANGER (5 hook ) as per detailed drawing and as directed by engineering

Rupees Two Hundred Forty Nine

209 incharge. Rate are inclusive of all material,labour, taxes. As per approved list of GSHPHCL 125.00 NO. 249.85

And Paise Eighty Five Only

210 Providing and fixing 20 mm dia Alluminium rod with Alluminium chapla etc. complete. 160.00 RMT 80.00 Rupees Eighty Only

Providing & Fixing Wall Hung with PVC Flush Tank, Soft Seat Cover & intergal "P" or "S" Trap including

Jointing the Trap with Pan and Soil pipe. Wall hung shall be fixed on S.S heavy duty rack bolt having

Rupees Five Thousand Four

16mm dia, 165mm length using Plastic sleeve Make by Using Drill Bitt Only. Rate are inclusive of all

211 106.00 No. 5470.90 Hundred Seventy And Paise Ninety

matreials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as

per the Instruction of Engineer In charge. The Model & Make of Wall Hung & Flush Tank Shall be as per

the Approved Make List of GSPHCL.

Providing & Fixing Shower with Arm. Rate are inclusive of all matreials, Labour & Necessary Fittings

etc. Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. Rupees Nine Hundred Thirty One

The Model & Make of Shower with Arm Shall be as per the Approved Make List of GSPHCL. And Paise Seventy Nine Only

Providing & Fixing 15mm Concealed Heavy Duty Stop Cock with Exposed Part & Other Accessories

(Sleeve, Lever, Wall Flange). Rate are inclusive of all matreials, Labour & Necessary Fittings etc.

Rupees Nine Hundred Forty Two

213 Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. The 103.00 No. 942.54

And Paise Fifty Four Only

Model & Make of Concealed Heavy Stop Cock Shall be as per the Approved Make List of GSPHCL.

Providing and Fixing concealed centre point to wall ceiling and floor CPVC ( SDR 13.5) poipe having

National sanitation foundation ( NSF) seal for potable water of following dia. Nominal bore tube fittings

Rupees Two Hundred Two And

214 and clamps including, making good the wall,ceiling and floor etc complete.Pipe shall be concealed or 1050.00 RMT 202.97

Paise Ninety Seven Only

open as per mentioned in tender description.Pipe shall be approved make of GSPHCL list (20 mm

Providing and Fixing concealed centre point to wall ceiling and floor CPVC ( SDR 13.5) poipe having

National sanitation foundation ( NSF) seal for potable water of following dia. Nominal bore tube fittings

Rupees Two Hundred Forty Seven

215 and clamps including, making good the wall,ceiling and floor etc complete.Pipe shall be concealed or 670.00 RMT 247.25

And Paise Twenty Five Only

open as per mentioned in tender description.Pipe shall be approved make of GSPHCL list (25 mm

Providing and fixing concealed or open center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings

Rupees Three Hundred Thirty And

216 with Z patti (Minimum 1.6mm thick) with 6mm Dia U Clamp with washer for Vertical water supply pipe. 670.00 RMT 330.36

Paise Thirty Six Only

Pipe shall be concealed or open as mention in tender description. Pipe shall be as per approved make of

GSPHCL make list (32 mm inside dia).

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing and fixing concealed or open center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube

Rupees Four Hundred Thirty Seven

217 fittingswith Z patti (Minimum 1.6mm thick) with 6mm Dia U Clamp with washer for Vertical water supply 1018.00 RMT 437.66

And Paise Sixty Six Only

pipe. Pipe shall be concealed or open as mention in tender description. Pipe shall be as per approved

make of GSPHCL make list (40 mm inside dia).

Providing and fixing concealed or open center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube

Rupees Six Hundred Forty Seven

218 fittingswith Z patti (Minimum 1.6mm thick) with 6mm Dia U Clamp with washer for Vertical water supply 638.00 RMT 647.30

And Paise Thirty Only

pipe. Pipe shall be concealed or open as mention in tender description. Pipe shall be as per approved

make of GSPHCL make list (50 mm inside dia).

Providing & Fixing to Wall Ceilling and Floor SWR (Type A) Rain Water pipe as Per IS-13592 of 90mm

Dia. Complete with Special Flings, vent cowl, Compressor type Fittings like G.I. Slotted Z patti of

Gauge (minimum1.60mm thick) and minimum 6mm dia. U Clamp with Washer Nut at every 1.50mt.

Rupees Three Hundred Twenty

219 vertical distance including All Labour Charges etc. complete including making good the Ceilings, Floors 899.00 RMT 323.15

Three And Paise Fifteen Only

and on terrace. Rain water pipe shall be 90 mm Dia. SWR horizontal pipe and vertical pipe and 90mm

bend at the end near by Ground level. Rate are Inclusive of all Necessary Fittings required for ALL

Providing and fixing to wall, ceiling and floor U.PVC SWR (Type-B) Soil Waste Pipe with 'O' Ring

mm dia. of ISI 13592/92. Rate inclusive of All fittings like single or double 'Y' with door, reducer, coupler

single 'T' with door bend, Vent cowl, G.I. Slotted Z patti of 16 Gauge (minimum1.60mm thick) and Rupees Two Hundred Sixty Four

minimum 6mm dia. U Clamp with Washer Nut at every 1.50mt. vertical distance including All Labour And Paise Ninety Seven Only

Charges etc. complete and making good the Wall, Ceiling and Floor.

Providing and fixing to wall, ceiling and floor U.PVC SWR (Type B) Soil Waste Pipe with 'O' Ring

110 mm dia. of ISI 13592/92. Rate inclusive of All fittings like single or double 'Y' with door, reducer,

coupler single 'T' with door bend, vent cowl,G.I. Slotted Z patti of 16 Gauge (minimum1.60mm thick) and Rupees Four Hundred Ninety Five

minimum 6mm dia. U Clamp with Washer Nut at every 1.50mt. vertical distance including All Labour And Paise Ninety One Only

Charges etc. complete and making good the Wall, Ceiling and Floor.

Provinding and fixing in position SWR/UPVC COWEL VENT to pipe 75 mm dia directed. Rupees Sixteen And Paise Forty

Provinding and fixing in position SWR/UPVC COWEL VENT to pipe 110 mm dia directed. Rupees Twenty Eight And Paise

Providing & fixing PVC SWR MULTY NANHI TRAP IS:14735 for drain -100mm dia. With jali of following

nominal dia. of self cleansing design with C.I. Screwed down or Hinged grating including the cost of

cutting and making good the walls. Providing & Fixing Floor drain jali (Glossy Finish) (on N.T.) of 6" X Rupees One Thousand One

224 6"size made of Stainless Steel Grade 304 Floor Drain 3 Piece (Cover/Jali/Grating) With Anti Cockroach 147.00 NO 1122.26 Hundred Twenty Two And Paise

Bowl on N.T. Rate are inclusive of all necessary fittings, material, labour etc.complete as per direction of Twenty Six Only

Engineer In charge.

Construction of BRICK MASONRY CHAMBER for under Ground C.I. inspection chamber and bends with

bricks having crushing strength not less than 35 Kg / Cm2 in Cement Mortar (1:5) with RCC top slab with

CC (1:2:4) mix ( 1 cement : 2 corse sand : 4 gradded aggregate 20 mm nominal size) with 8mm. dia.

TMT steel at 15 cm. c/c both ways & providing and fixing precast r.c.c cover size .60 x .45 x .07 mt. with

Rupees Three Thousand Seven

angle frame fixed with C.C (1:2:4) Foundation concrete 1:5:10, inside plaster 15 mm thick with C:M (1:3)

225 42.00 NO. 3793.18 Hundred Ninety Three And Paise

finished smooth with a floating coat of neat cement slurry on walls & bedconcrete etc, complete. Inside

dimension of chamber 455 mm x 610 mm x 450 mm deep for match proposed pipe line. Rate are also Eighteen Only

inclusive of out side plaster 15mm. th. in c:m 1:3 from top of the chamber & all side up to 15 mm. deep

below ground level. Including precast cover.

Construction of BRICK MASONRY CHAMBER for under Ground C.I. inspection chamber and bends with

bricks having crushing strength not less than 35 Kg / Cm2 in Cement Mortar (1:5) with RCC top slab with

CC (1:2:4) mix ( 1 cement : 2 corse sand : 4 gradded aggregate 20 mm nominal size) with 8mm. dia.

TMT steel at 15 cm. c/c both ways & providing and fixing precast r.c.c cover size .60 x .45 x .07 mt. with

Rupees Five Thousand Four

angle frame fixed with C.C (1:2:4) Foundation concrete 1:5:10, inside plaster 15 mm thick with C:M (1:3)

226 10.00 NO. 5476.93 Hundred Seventy Six And Paise

finished smooth with a floating coat of neat cement slurry on walls & bedconcrete etc, complete. Inside

Ninety Three Only

dimension of chamber 610 mm x850 MMX 450 mm deep for match proposed pipe line. Rate are also

inclusive of out side plaster 15mm. th. in c:m 1:3 from top of the chamber & all side up to 15 mm. deep

below ground level.Including precast cover.

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone

aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1 cement : 3- coarse sand :6- Brick bats

40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1:3 (1-Cement : 3-coarse sand)

finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1-

Cement :2-Coarse sand :4- stone aggregate 20mm nominal size) finished smooth complete including Rupees Thirteen Thousand Seven

227 curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 2.00 NO. 13715.57 Hundred Fifteen And Paise Fifty

560mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Seven Only

Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick having crushing strength not

less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5- Coarse sand) (2) B type depth 1.50 Metre

for 150mm diameter sewer.

Extra rate for constructing chamber for every additional depth of 0.1 m or part there of FOR 455MM X Rupees Two Hundred Thirty Nine

610MM And Paise Ninety Nine Only

Extra rate for constructing Chamber for every additional depth of 0.1 m or part there of FOR 600 MM X

Rupees Three Hundred Twenty

Two And Paise Thirty Seven Only

Extra rate for constructing manholes for every additional depth of 0.1 m or part there of FOR MANHOLE

Rupees Three Hundred Ninety

Three And Paise Twenty Six Only

Providing,supplying and fixing Corrugated DWC HDPE pipe of Class SN8 Structured Wall polyethelene

Piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth External

Annular Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure underground

Sewerage & Drainage application as per EN:13476-3 including all local and central taxes, transportation,

freight charges, octroi, inspection charges, loading, unloading, conveyance etc. complete. (150 mm ID

Dia) Including Lowering, laying and jointing of class SN 8 structured wall ( External Annular Corrugated &

Smooth Internal surface) Polyethylene Piping and fittings with the help of coupler ( on line / off line ) Rupees Three Hundred Ninety Six

attached with one end of pipes, sliding over the elastomeric sealing rubber ring placed on the specified Only

valley of the corrugation at the spigot end, lowering the same into the trench, laying on the lower bedding

(constructed at bottom of trenches) at prescribed gradient,depth & alignment ,testing the water tightness

of the joints, ensuring the continuity tests of specified pipe segments etc. complete as per

drawing,specifications & detailed engineering, including carriage of pipes & fittings from site stacks to the

place of laying etc. as per direction of Engineer-in-charge.

Providing,supplying and fixing Corrugated DWC HDPE pipe of Class SN8 Structured Wall polyethelene

Piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth External

Annular Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure underground

Sewerage & Drainage application as per EN:13476-3 including all local and central taxes, transportation,

freight charges, octroi, inspection charges, loading, unloading, conveyance (200 mm ID Dia) Including

Lowering, laying and jointing of class SN 8 structured wall ( External Annular Corrugated & Smooth

Internal surface) Polyethylene Piping and fittings with the help of coupler ( on line / off line ) attached with

Rupees Seven Hundred Seventy

232 one end of pipes, sliding over the elastomeric sealing rubber ring placed on the specified valley of the 170.00 RMT 771.00

corrugation at the spigot end, lowering the same into the trench, laying on the lower bedding (constructed

at bottom of trenches) at prescribed gradient,depth & alignment ,testing the water tightness of the joints,

ensuring the continuity tests of specified pipe segments etc. complete as per drawing,specifications &

detailed engineering, including carriage of pipes & fittings from site stacks to the place of laying etc. as

per direction of Engineer-in-charge.

Providing & Fixing Stop/Angle cock 25mm Rate are inclusive of all materials, Labour & Necessary

Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer In Rupees One Thousand Two

233 charge. The Model & Make of Shower with Arm Shall be as per the Approved Make List of GSPHCL.

69.00 NO. 1233.57 Hundred Thirty Three And Paise

Fifty Seven Only

Providing & Fixing Angle Cock with Wall Flange . Rate are inclusive of allmaterials, Labour & Necessary

Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer In Rupees Six Hundred Sixty Five

charge. The Model & Make of Angle Cock Shall be as per the Approved Make List of GSPHCL. And Paise Fifty One Only

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Provinding and fixing gun metal check or non return full way WHEEL / HANDLE VALVE Rate are

inclusive of all matreials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Rupees Six Hundred Fifty Six And

Specifications and as per the Instruction of Engineer In charge. All material used as per approved make Paise Eighty Six Only

list by GSPHCL. (40 mm inside dia).

Provinding and fixing gun metal check or non return full way WHEEL / HANDLE VALVE Rate are

Rupees Two Thousand Three

inclusive of all matreials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings,

236 16.00 NO. 2302.33 Hundred Two And Paise Thirty

Specifications and as per the Instruction of Engineer In charge. All material used as per approved make

list by GSPHCL. (50 mm inside dia).

237 Painting Numbers or name on Acrylic plate as Directed by Engineer in Charge. 63.00 NO. 100.00 Rupees One Hundred Only

Providing a I.S.I. mark 7 lavers three keys brass pad lock of NAVTRAL (godrej) make 65mm dia on Rupees Two Hundred Eleven And

completion of porject. Paise Eighty Six Only

Providing,Fabricationandfixing M.S.Grill /GATE of approved patter nfabricatedfromM.S. flat,Square Bars,

roundbars,Cchannel, square/roundboxpipeasperdetaildrawings.Rate is inclusiveofwelding

Rupees Seventy Four And Paise

239 withgrindingandapplyingofmildsteelputtywithhardener intogroovetohavesmoothsurface, twocoats of oil 36863.75 KG. 74.92

Ninety Two Only

paint and one coat of yellow zinc chromate primer coat as per the Approved Make List of GSPHCL

Providing and fixing chicken wire mesh jali of 20 guage with necessary screws and nails at joints or

Rupees Sixty Four And Paise Six

240 crackes of brick work or RCC work, as per drawing, spicification and direction of Engineer in charge.wire- 1501.00 SMT 64.06

mesh jali shall confirm to relevant IS specification.

Providing and fixing letter box having a size of 300mm x 250 mm as per instruction of engineer in

241 24.00 nos 560.00 Rupees Five Hundred Sixty Only

Providing , carving & Fixing of a Granite takti of size 0.30mtr x0.30mtr as per instruction of Engineer

242 1.00 Nos 1000.00 Rupees One Thousand Only

Providing and fixing 1050mm high S.S. railing made from S. S. pipe of 50mm dia & 1.5mm thick, SS

316 grade horizontal at top for hand rail and with 50mm dia & 1.5mm thick, SS 316 grade SS top

mounted round baluster as a vertical member fixed in Block ledge wall with double glass holding

Rupees Fifteen Thousand One

accessories, with 12mm thick toughened glass (upto 775mm height) fixed with 100mm dia x 8mm thick

243 155.00 RMT 15171.26 Hundred Seventy One And Paise

316 grade base plate with cover cap with 2No.. Hilti GI M10x80mm as per drawing using grouting

Twenty Six Only

material as directed by engineer in charge. Rate are inclusive of all material, labour, taxes, polishing etc.

and fixing complete. (Kich or equvalent)

Providing and Fixing of stainless steel 304 grade pipe railing.0.9 mtr. Height top pipe of 2" dia , vertical

balustrade 1.0 " x1.0" at every max. 0.9 mt c/c, fixed with stone/concrete or brickwork, Balustrade as Rupees Nine Hundred Eleven And

directed by engineer in charge. Rate are inclusive of all material,labour,taxes &polishing. Paise Three Only

Providing upto floor two level precast cement concrete jali or grill 1:2:4 mix (1- Cement : 2- coarse sand :

4-graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia. Mild steel wire including Rupees Six Hundred Forty And

roughening,cleaning, fixing and finishing in cement mortar 1:3 and curing complete. (B)40 mm thick Paise Twenty Only

providing & fixing Door Eye glass ultra clear 180 degree finished with Brass as per detailed drawing and

Rupees Two Hundred Forty Eight

246 as directed by engineer incharge. Rate are inclusive of all material, labour and taxes. 20.00 NO 248.31

And Paise Thirty One Only

Providing and fixing both side polished machine cut Granite Shelves / Partitions 18mm thick embaded

Rupees Two Thousand One

in to wall at support including racking and finishing smooth the surface including cutting the stone as and

247 15.00 SMT 2115.40 Hundred Fifteen And Paise Forty

where required etc. complete including rounding of exposed edges etc. complete.

supplying j and installation of GRC jali thickness 25mm , grade M-40 ,Flexural M8 , Backside double

Rupees Seven Thousand Three

coated frame fabrication at site including installation at site, transportation loading , unloading all with

248 151.00 SMT 7379.10 Hundred Seventy Nine And Paise

both sides weather proof emulsion paint etc complete as directed by EIC (For NRB Elevation Only)

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Gypsum False Ceiling Providing and fixing gypsum board ceiling as per manufactures' specifications

incl. acrylic paint. Fixing of suspended gypsum plain false ceiling by using standard company section

(GYPSTEEL ULTRA), which includes providing and fixing G.I. parameter channels of size 20 X 28 X

X 0.55 mm thick having one flange of 20 mm and another flange of nylon sleeves and screws at 610 mm

center. Then suspending G.I intermediate channels of size 15 X 45 X 15mm, 0.9 mm thick fixed with two

flanges of 15 mm each from the sophist at 1220 mm center with ceiling angle of width 25 mm x 10 mm x Rupees One Thousand Two

0.55 mm thick fixed to sophist with G.I. cleat and steel expansion fasteners. Ceiling section of 0.55 mm. 504.00 SMT 1219.89 Hundred Nineteen And Paise

thickness having knurled web of 51 mm. and two flanges of 26 mm each with lips of 10.5 mm. area then Eighty Nine Only

fixed to the intermediate channel with the help of connecting clips and in direction perpendicular to the

intermediated channel at 457 mm. center 12.5 mm tapered edge gypsum board (conforming to is 2095-

1982) is then screw fixed to ceiling section with 25 mm drywall screws at 230 mm center.

Screws fixing is done mechanically either with screwdriver or drilling machine with suitable attachment.

Standard company manufactured section (GYPSTEEL ULTRA) should be used for the entire framework.

Finally the board are to be jointed and finished, so as to have a flush look which includes filling and

finishing the tapered and square edges of the boards with jointing compound, paper tape and two coats

of primer suitable for Gyp-board (as per recommended practices of India Gyproc - Saint Gobain make).

(also including application of primer and preparing surface even & sand papered smooth with lapi,

astar...) Including three coats with plastic emulsion paint of approved brand & manufacture. Including all

materials and labour etc. complete as per detail drawing and instruction of engineer-in charge.

Providing & Fixing 600mm dia. loop hot dip galvenised iron concertina coil made out of 2.5mm dia wire

22mm long razor sharp barbs at 35mm center fitted on 40mm x 40mm x 5mm M.S. Angle post of

required shape & size at 3.00 mt. center distance. concertina coil shall be fixed on M.S. Angle stand with

Rupees Six Hundred Thirty Two

250 the help of 4 Nos. RBT wire M.S. Angle stand shall be fixed on top of Compound wall with 0.20mt x 203.00 RMT 632.00

0.31mt x 0.40mt. deep block in controlled cement concrete M-250. Rate is including of applying one coat

of primer and three coats oil painting on M.S. Angle stand shall be made as per the drawing supplied or

as directed by engineer in charge.

Providing and filling the expansion joint by Thioflex 600 polymer or equivalnt confirm to BS 4254-1983 as

per required shade and manufactured specification by making groove of 50 mm X 12.5 mm lather by

Rupees Five Hundred Ten And

251 cutting or by repairing groove and removing mortar drop or any other foreign materials including applying 5.00 SMT 510.29

Paise Twenty Nine Only

primer and filling required size ( over size) of joint PU foam etc. complete

252 Providing & Laying lawn for Land Scaping including watering & all labours 700.00 SMT 150.00 Rupees One Hundred Fifty Only

Providing & Laying tree plantation rate are also inclusive of maintaing the tree plant in live condition at

253 the time of completion of work at the time of Excavation of the building i.e. initial starting time (the tree 100.00 No. 600.00 Rupees Six Hundred Only

shall be minimum 1.50mt height).

Provding and fixing pre-cast Rubber Dye/ steel Dye inter locking concrete block 60 mm thick with grade

of concrete M-300 pnumatic compressed / Vibrated mechanically pressed and as per approved design Rupees Six Hundred Eighty And

and IS 15658 : 2006 including 35 mm Sand layer for levelling and filling the joint with sand in proper line Paise Ten Only

and level as per guidlines of IRC : SP 63-2018 etc. complete.

Providing and fixing Precast Concrete Kerb Stone of Grey Cement Based Concrete Block size of 30 cm

Length, 30 cm Height and 15 cm thick of M-250 Grade Concrete as per approved design in required

Rupees Three Hundred Fifty Eight

255 colour (Red, White, and Yellow) and Including Excavation For Fixing In proper Line And Level, Filling The 370.00 Rmt 358.06

And Paise Six Only

Joint C:M 1:3 (1 Cement : 3 Fine Sand) etc. Complete.

Providing and Corrugated JSW pre coated sheet roofing fixed with galvanized iron J or L hooks,bolts and

Rupees Nine Hundred Seventy

256 nuts 8mm diameter with bitumen and G.I limpet washer or G.I limpet washer with white lead complete 150.00 SMT 977.38

Seven And Paise Thirty Eight Only

excluding the cost of purlins,rafters and trusses. (0.60mm thick)

Box cutting the road surface to proper slope and camber for making a base for road work including

Rupees One Hundred One And

257 removing the excavated stuff and disposing on the road side slope as directed up to any lead. 452.00 CMT 101.91

Paise Ninety One Only

Construction of Granular Sub base by Providing Couarse graded material Spreading in uniform Layers

Rupees One Thousand Four

With motor grader on prepared surface mixing by mix in place method with rotavator at OMC and

258 128.00 CMT 1441.28 Hundred Forty One And Paise

Compacting with Vibratory roller to achieve the desired density complete as per table 400-2

Twenty Eight Only

Supplying of graded stone aggregate of following sizes (for W.B.M. Road) ( 3) Crushed stone aggregate

Rupees Nine Hundred Ninety

259 for Hard Quality up to 63 mm stze 96.00 CMT 997.21

Seven And Paise Twenty One Only

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Spreading the stone aggregate for rolling and W.B.M. including filling the interstices to required camber

Rupees Two Hundred Forty Seven

260 and gradient (excluding spreading of Blindage) (ii) 40mm to 63mm size aggreagates (H.B.) 96.00 CMT 247.28

And Paise Twenty Eight Only

Supplying of murum on W.B.M surface etc. complete Rupees Two Hundred Ninety Two

And Paise Forty Only

Spreading blidage or road crust filling the gaps in metal and leveling to cambert and gradient as directed Rupees One Hundred Forty Six

.(i)Murrum And Paise One Only

Rolling & consolidation water bound macadam (except laterite and kankar) including watering not

exceeding 150mm thk. (Main layer incl. binding materials) includining filling in depression which occurs Rupees Twenty And Paise Seventy

during the process. (A)with Power roller exceeding 8 tonne and not exceeding 12 tonnes Nine Only

Construction Of Concrete Road Using Trimix System Having of any Thickness M-300 Ready Mix

Concrete With Providing And Fixing & Removing Of "C" Channel Having Size 75Mm. X75Mm As Per

Required Level Slope And Thickness Of Concrete Road Floor Levelling Of Place Concrete With Surface Rupees Five Thousand One

264 Vibrator Machine,Dewatering System Device Finishing With Power Floater Machine And Trowel Light 229.00 CMT 5175.24 Hundred Seventy Five And Paise

Brooming On The Surface As Directed With Providing Expansion Joint Size 20 X 190Mm. Using Of Twenty Four Only

Concrete Cutter Machine Including Curing Etc. Complete.

Providing and lixing pre- moulded compressible filler board in black colour confirming to MORT&H

Specifications (Clause 1015). having minimum density 95kg/cum.metre, non-staining with less than 1% Rupees Seven Hundred Eighty

265 water absorption & compression recovery of 93% minimum as per specification for 20 mm wide 36.00 SMT 788.78 Eight And Paise Seventy Eight

expansion joint including cutting to required size and shape at all levels etc. complete as directed. Only

Providing and fixing 25 mm diameter backup rod having minimum density 22 kg per cum (ASTMD -

Rupees Seventeen And Paise Forty

266 3575) & compression strength of 0.40 kg per sqm (ASTM 5249) and finishing with polysulphide sealant 46.00 RMT 17.48

etc. complete. For 20 mm wide expansion joint

Providing Groove cutting in C.C. Road incluing cleaning etc.complete as per direction of Engineer Rupees Thirty Six And Paise

incharge Eighty Only

Providing & Laying sand & Bitumen filler in joints 10 & 25 mm Rupees Eleven And Paise Fifty

Providing & Fixing Precast RCC Frame with Cover MD 10 Ton ( Rubber Mould Finish ) Inner size 600 x Rupees One Thousand Seven

450 mm with All Necessary Fittings. Hundred Two Only

Providing and fixing to wall celling and floor 10.0 kgf/sqcm working pressure polythelene pipes of the

following outside diameter, low density, complete with special flange compression type fittings, wall clips Rupees Three Hundred Thirty Two

etc. making good wall ceiling and floor (G) 110 mm diameter And Paise Ninety One Only

Drilling and reaming of 400/450mm bore hole in alluvials starta by given 300mm dia pilot bore hole

including assembling lowering hoising casing pipes stainer pipe with gravel packing etc complete. Rupees Eight Hundred Seventy

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium

well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour Rupees Six Hundred Fifty Four

charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. And Paise Twelve Only

pipe size : 150 mm

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium

well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & Rupees Six Hundred Sixty Five

accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. Pipe size : 150 mm And Paise Eighty Five Only

Material charge for the bore inclding labor & materials PVC bore plug/ Cap plug, clamp having lenth of Rupees Two Thousand Eight

274 0.45 mt as per IS for 150 mm dia pipe 1.00 No 2803.62 Hundred Three And Paise Sixty

supplying best qualty of well sorted out "sevalia " gravel of size 4mm to 7mm at site Rupees Two Thousand Twenty

Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not

less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross Rupees One Thousand One

276 sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including 1.00 No 1154.40 Hundred Fifty Four And Paise

providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Forty Only

Engineerin-charge.

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S.

Rupees Two Hundred Forty Six

277 class NP2 of the following internal diameter with collars and butt ends prepared for collar joints including 105.00 RMT 246.21

And Paise Twenty One Only

testing of joints complete.(B) 150mm

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S.

Rupees Three Hundred Forty Four

278 class NP2 of the following internal diameter with collars and butt ends prepared for collar joints including 30.00 RMT 344.59

And Paise Fifty Nine Only

testing of joints complete..(C) 250mm

Providing and fixing Single headed internal hydrant having outlet of 63 mm dia(2.1/2”) N.B. hydrant Rupees Six Thousand Eight

279 (IS:5290) (Type-A) landing valve in SS Morris Pattern instanteous coupling type with required hardwares. 26.00 No. 6886.72 Hundred Eighty Six And Paise

Seventy Two Only

Providing & fixing 63mm dia 15 m long RRL hose pipe with 63mm dia male and femal couplings duly Rupees Three Thousand Nine

280 bound with GI wires, revates etc. confirming to IS 636 (typa-A) as required 28.00 No. 3916.23 Hundred Sixteen And Paise Twenty

Stainless steel (grade 304) Three Only

Providing, fixing, testing and commissioning of Weather proof standard fire Hose Cabinet fabricated from

Rupees Five Thousand One

281 18 guage sheet, floor mounting type having Double Opening with M.S. Fabricated Stand, necessary 29.00 No. 5100.00

locking arrangement by allan key. (750x600x250mm)

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, confirming

to IS 884 complete with the following as required.

25 mm nominal int. dia. Water hose thermoplastic (Textile reinforced) type-2 as per IS12585 Rupees Seven Thousand Nine

282 25 mm nominal internal dia gun metal globe valve and nozzle. 27.00 No. 7920.84 Hundred Twenty And Paise Eighty

Drum and brackets for fixing the equipment of the wall. Four Only

Connections from risers with 32 mm dia stop gun metal valve & MS pipe and socket.

Providing, fixing and testing of Air Vessel made of 250 mm dia, 8 mm thk sheet, 1200 mm in height with Rupees Sixteen Thousand Two

283 air release valve in top & connection to riser, drain arrangement with 25 mm GM wheel valve with 2.00 No. 16279.35 Hundred Seventy Nine And Paise

required accessories, pressure gauge, painting, etc. compelte Thirty Five Only

Providing and fixing of 63 mm SS branch pipe nozzle conforming to IS 903, suitable for instantaneous Rupees Two Thousand Eight

284 connections to hose coupling etc. as required 27.00 No. 2854.62 Hundred Fifty Four And Paise Sixty

Supplying and fixing specially designed SS 304 orifice plates (minimum 6 mm plate thickness) to be fitted Rupees One Thousand Two

285 between flange and landing valve of external & internal hydrant outlets of hydrant valves for reducing 27.00 No. 1204.79 Hundred Four And Paise Seventy

delivery pressureto 3.5 kg/ sq.cm at hydrant valve Nine Only

Providing, laying, testing and commissioning of the 'C’ class MS Pipe as per IS1239/3589 i/c fittings like

elbows, tees, flanges, tappers, nuts, bolts, gaskets etc. in ground including welding, excavation & Rupees Four Thousand Two

286 providing cement concrete blocks as supports, anti corrosive treatment with 4 mm thick anti corrosive 109.00 Mtr. 4282.61 Hundred Eighty Two And Paise

pipe protection Bituminous tape with black anti corrosive paint as per IS 10221, refilling the trench etc. of Sixty One Only

following sizes complete as required. Size : 150 mm NB

Providing, laying, testing and commissioning of the 'C’ class MS Pipe as per IS1239/3589 i/c fittings like

elbows, tees, flanges, tappers, nuts, bolts, gaskets etc. in ground including welding, excavation & Rupees Three Thousand Four

287 providing cement concrete blocks as supports, anti corrosive treatment with 4 mm thick anti corrosive 89.00 Mtr. 3445.02 Hundred Forty Five And Paise Two

pipe protection Bituminous tape with black anti corrosive paint as per IS 10221, refilling the trench etc. of Only

following sizes complete as required.Size : 100 mm NB

Providing, laying, testing and commissioning of the 'C’ class MS Pipe as per IS1239/3589 i/c fittings like

elbows, tees, flanges, tappers, nuts, bolts, gaskets etc. in ground including welding, excavation & Rupees Two Thousand Eight

288 providing cement concrete blocks as supports, anti corrosive treatment with 4 mm thick anti corrosive 49.50 Mtr. 2854.76 Hundred Fifty Four And Paise

pipe protection Bituminous tape with black anti corrosive paint as per IS 10221, refilling the trench etc. of Seventy Six Only

following sizes complete as required. Size : 80 mm NB

Supplying & fixing single headed external yard hydrant valve with 1 no 63 mm dia instantaneous SS

Rupees Five Thousand Five

coupling and CI wheel, ISI marked, confirming to IS 5290 (Type A) with blank gunmetal /SS cap and

289 2.00 No. 5564.93 Hundred Sixty Four And Paise

chain as required

Ninety Three Only

Single headed stainless steel

Supplying and fixing 4 way Fire Brigade service inlet connection of CI body with gun metal instantanoeus Rupees Twelve Thousand Four

290 male inlet coupling complete with chain & cap as required for suitable MS pipe (150 mm) connection 1.00 No. 12435.20 Hundred Thirty Five And Paise

conforming to IS 904 as required Twenty Only

Supplying and fixing 2 way Fire Brigade service inlet connection of CI body with gun metal instantanoeus

Rupees Six Thousand Ninety Three

291 male inlet coupling complete with chain & cap as required for suitable MS pipe (100 mm )connection 1.00 No. 6093.41

And Paise Forty One Only

conforming to IS 904 as required

Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 3589/IS

1239 including welding, fittings like elbows, tees, flanges, tappers, nuts, bolts, gaskets etc and fixing the

pipes on wall/ceiling with suitable clamps/support frame and painting with 2 or more coats of synthetic

Rupees Five Thousand Five

enamle paint of required shade complete as required. The work includes makingholes in brick or RCC

292 20.00 Rmt. 5555.02 Hundred Fifty Five And Paise Two

walls, slabs/ roofs and making good the damages by bringing to the original condition to the satisfaction

of the Engineer in charge, painting two coats of approved shade(Post office red) of enamelpaint over a

coat of approved primer. 200 mm dia (6.3 mm thk )

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 3589/IS

1239 including welding, fittings like elbows, tees, flanges, tappers, nuts, bolts, gaskets etc and fixing the

pipes on wall/ceiling with suitable clamps/support frame and painting with 2 or more coats of synthetic

Rupees Three Thousand Six

enamle paint of required shade complete as required. The work includes makingholes in brick or RCC

293 17.00 Rmt. 3606.90 Hundred Six And Paise Ninety

walls, slabs/ roofs and making good the damages by bringing to the original condition to the satisfaction

of the Engineer in charge, painting two coats of approved shade(Post office red) of enamelpaint over a

coat of approved primer 150mm dia (6.3 mm thk )

Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 3589/IS

1239 including welding, fittings like elbows, tees, flanges, tappers, nuts, bolts, gaskets etc and fixing the

pipes on wall/ceiling with suitable clamps/support frame and painting with 2 or more coats of synthetic

Rupees Two Thousand Five

enamle paint of required shade complete as required. The work includes makingholes in brick or RCC

294 26.20 Rmt. 2581.50 Hundred Eighty One And Paise

walls, slabs/ roofs and making good the damages by bringing to the original condition to the satisfaction

of the Engineer in charge, painting two coats of approved shade(Post office red) of enamelpaint over a

coat of approved primer 100mm dia (6.3 mm thk )

Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 3589/IS

1239 including welding, fittings like elbows, tees, flanges, tappers, nuts, bolts, gaskets etc and fixing the

pipes on wall/ceiling with suitable clamps/support frame and painting with 2 or more coats of synthetic

Rupees One Thousand Nine

enamle paint of required shade complete as required. The work includes makingholes in brick or RCC

295 7.40 Rmt. 1910.39 Hundred Ten And Paise Thirty Nine

walls, slabs/ roofs and making good the damages by bringing to the original condition to the satisfaction

of the Engineer in charge, painting two coats of approved shade(Post office red) of enamelpaint over a

coat of approved primer 80 mm dia (6.3 mm thk )

Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 3589/IS

1239 including welding, fittings like elbows, tees, flanges, tappers, nuts, bolts, gaskets etc and fixing the

pipes on wall/ceiling with suitable clamps/support frame and painting with 2 or more coats of synthetic

Rupees One Thousand Six

enamle paint of required shade complete as required. The work includes makingholes in brick or RCC

296 40.00 Rmt. 1640.26 Hundred Forty And Paise Twenty

walls, slabs/ roofs and making good the damages by bringing to the original condition to the satisfaction

of the Engineer in charge, painting two coats of approved shade(Post office red) of enamelpaint over a

coat of approved primer 65mm dia (6.3 mm thk )

Providing, installing testing & commissioning of SS Y-strainers fabricated out of 1.6 mm thick SS grade Rupees Nineteen Thousand Seven

297 304, sheet with 3 mm dia holes with stainless steel flange 3.00 No. 19777.59 Hundred Seventy Seven And Paise

Size : 200 mm Fifty Nine Only

Supply and installation,testing and commisioning of Butterfly valves of PN 1.6 ratings with Rupees Thirteen Thousand Six

298 bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets confirming to IS 2.00 No. 13633.11 Hundred Thirty Three And Paise

13095 of following sizes as required: 200 mm dia Eleven Only

Supply and installation,testing and commisioning of Butterfly valves of PN 1.6 ratings with Rupees Eight Thousand One

299 bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets confirming to IS 4.00 No. 8170.27 Hundred Seventy And Paise

13095 of following sizes as required: 150mm dia Twenty Seven Only

Supply and installation,testing and commisioning of Butterfly valves of PN 1.6 ratings with Rupees Six Thousand One

300 bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets confirming to IS 3.00 No. 6101.25 Hundred One And Paise Twenty

13095 of following sizes as required: 100mm dia Five Only

Supply and installation,testing and commisioning of Butterfly valves of PN 1.6 ratings with Rupees Four Thousand Five

301 bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets confirming to IS 6.00 No. 4536.15 Hundred Thirty Six And Paise

13095 of following sizes as required: 80mm dia Fifteen Only

Supply and installation,testing and commisioning of Butterfly valves of PN 1.6 ratings with Rupees Three Thousand Nine

302 bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets confirming to IS 2.00 No. 3953.93 Hundred Fifty Three And Paise

13095 of following sizes as required: 65mm dia Ninety Three Only

Providing, installing testing & commissioning of NON RETURN VALVE of following sizes confirming to IS Rupees Fifteen Thousand Eight

303 5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required. 150 mm dia 4.00 No. 15845.08 Hundred Forty Five And Paise

Providing, installing testing & commissioning of NON RETURN VALVE of following sizes confirming to IS Rupees Nine Thousand Nine

304 5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required. 100mm dia 4.00 No. 9945.68 Hundred Forty Five And Paise

Sixty Eight Only

Providing, installing testing & commissioning of NON RETURN VALVE of following sizes confirming to IS Rupees Six Thousand Nine

305 5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required. 80mm dia 4.00 No. 6926.77 Hundred Twenty Six And Paise

Seventy Seven Only

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Providing, installing testing & commissioning of NON RETURN VALVE of following sizes confirming to IS

Rupees Five Thousand Eight

306 5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required. 65 mm dia 1.00 No. 5800.62

Hundred And Paise Sixty Two Only

Providing & fixing of pressure switch in MS pipe line including connection etc. as required. Rupees One Thousand Four

307 4.00 No. 1400.85 Hundred And Paise Eighty Five

150 mm dial Bourdon type Pressure gauge with Syphon tubing, isoltaion valve & mounting accessories Rupees One Thousand Four

complete Range : 0 - 15 kg/sq.cm. Hundred Twelve Only

Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 3589/IS

1239 including welding, fittings like elbows, tees, flanges, tappers, nuts, bolts, gaskets etc and fixing the

pipes on wall/ceiling with suitable clamps/support frame and painting with 2 or more coats of synthetic

Rupees One Thousand Three

enamle paint of required shade complete as required. The work includes makingholes in brick or RCC

309 164.00 Rmt 1306.57 Hundred Six And Paise Fifty Seven

walls, slabs/ roofs and making good the damages by bringing to the original condition to the satisfaction

of the Engineer in charge, painting two coats of approved shade(Post office red) of enamelpaint over a

coat of approved primer. 50mm

Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 3589/IS

1239 including welding, fittings like elbows, tees, flanges, tappers, nuts, bolts, gaskets etc and fixing the

pipes on wall/ceiling with suitable clamps/support frame and painting with 2 or more coats of synthetic

enamle paint of required shade complete as required. The work includes makingholes in brick or RCC Rupees One Thousand Fifty Six

walls, slabs/ roofs and making good the damages by bringing to the original condition to the satisfaction And Paise Sixty Eight Only

of the Engineer in charge, painting two coats of approved shade(Post office red) of enamelpaint over a

coat of approved primer. 40mm

Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 3589/IS

1239 including welding, fittings like elbows, tees, flanges, tappers, nuts, bolts, gaskets etc and fixing the

pipes on wall/ceiling with suitable clamps/support frame and painting with 2 or more coats of synthetic

enamle paint of required shade complete as required. The work includes makingholes in brick or RCC Rupees Eight Hundred Seventy

walls, slabs/ roofs and making good the damages by bringing to the original condition to the satisfaction One And Paise Forty Only

of the Engineer in charge, painting two coats of approved shade(Post office red) of enamelpaint over a

coat of approved primer. 32mm

Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 3589/IS

1239 including welding, fittings like elbows, tees, flanges, tappers, nuts, bolts, gaskets etc and fixing the

pipes on wall/ceiling with suitable clamps/support frame and painting with 2 or more coats of synthetic

enamle paint of required shade complete as required. The work includes makingholes in brick or RCC Rupees Seven Hundred Seventy

walls, slabs/ roofs and making good the damages by bringing to the original condition to the satisfaction Two And Paise Nineteen Only

of the Engineer in charge, painting two coats of approved shade(Post office red) of enamelpaint over a

coat of approved primer. 25mm

Providing, fixing, testing and commissioning of 15 mm dia quartzoid bulb type sprinklers of ratings

Rupees Five Hundred Three And

313 degree centigrade with required accessories: 90.00 No. 503.01

Pendent sprinkler

SITC of test & drain assembly with all piping, sight glass, 25mm dia. test & drain valve etc complete Rupees Six Thousand Eight

314 8.00 No. 6869.73 Hundred Sixty Nine And Paise

Seventy Three Only

Supply and installation,testing and commisioning of Butterfly valves of PN 1.6 ratings with Rupees Three Thousand Four

315 bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets confirming to IS 5.00 No. 3452.30 Hundred Fifty Two And Paise

13095 of following sizes as required: 50 mm Thirty Only

Providing and fixing flow switches on MS pipe including connections etc. as required.50mm Rupees Two Thousand Five

316 8.00 No. 2521.38 Hundred Twenty One And Paise

Thirty Eight Only

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Sr No. Description As Per SOR 2024-25 Total Quantity Unit Rate Rate in Words Total Amount

Getting provisional NOC and Final NOC and Renewal of NOC (During Defect Liability Period) for Fire

Hydrant,Sprinkler system, Fire Extinguisher, Fire alarm system etc. from local fire authority or any other relevant

statutory authority at initial stage and required various other stages of construction work, including preparation of

reports/drawings as per fire authority requirement. Rate also includes renewal of Fire NOC during defectliability

period as per requirement. Main agency has to give demonstration of all fire system to fire officer police /

concern beneficiaries & GSPHCL. Agencyhas to submit FDR of approved bank as per clause 2.0, section 3, of

Rs 20000.00 Or Quoted rate which ever is higher to GSPHCL for minimum maturitperiod of Four yearsin favour

of GSPHC, which will be released after Successful Submitting of All Fire NOC at the completion of defect

liability period.Renewal FireN.O.C. shall be submitted final S.D.proposal.Agency has charges like preparing

and submission of all the documents, Photographs, CD/DVD required to get the N.O.C. from concern fire

department and also liaisoning work with concern departments. Main civil agency has to get the pre-NOC from

fire & emergency department well beforestarting civil & the fire hydrant work including sump & pumproom work.

For that professional & experience fire agency has to prepare drawing of fire hydrant system, sprinkler system, Rupees Sixteen Thousand Nine

fire alarm system, DGset etc. as per tender item and making floor layout of all fire pump panel, cable earthing Hundred Fifty Only

etc in pump room. If any changes required in drawings of sump & pump room. Main agency has to inform in

written before excavation of pump & sump room. Agency has to calculate the total head & discharge required as

per NBC/local fire office requirement and as per sitesituation and submit fire pump OEM specification curve

foundation detail etc & get approval of cable, panel drawings & specification. After completion of fire hydraunt

related work as per pre-NOC, tender specification & drawing approved by fire department, agency has to do site

visit with fire department & give the testing & demonstration to fire officer & get the final NOC before handing

over of the building. Agency has to give live testing & demonstration of all system to GSPHCL & police

department jointly. For fire NOC fee separate item is taken in tender. Agency has to quote the rate as per latest

Gazettein respective tender item.

Supplying and installation of minimum 46 mm thick Fire rated door as per IS 3614-2021 standards made

by galvanized steel conforming to 15 277 Fire door tested at CBR/NABL approved labs for maximum

Rupees Eleven Thousand Seven

rating of 2 hrs tested. Test certificate submitted shall be with in the validity period of 15 years.The frame

318 52.00 SMT 11740.27 Hundred Forty And Paise Twenty

and shutter are finished with powder coating of 60 micron of approved colour with all necessary fittings

(Fire door make approved by GSPHCL)

Providing and Laying of Fire Stop Mortar Seal( Fire Barrier) for Fire Penetration Sealing System in floor

Rupees Fourteen Thousand Eighty