Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.5 LAccepted-AOC | ₹1.5 L | L1 | Accepted-AOC L1 |
| 2 | L2₹1.5 L+₹1,710.23 (1.12%)Rejected-AOC | ₹1.5 L+₹1,710.23 (1.12%) | L2 | Rejected-AOC L2 |
| 3 | L3₹1.7 L+₹16,904.44 (11.1%)Rejected-Finance | ₹1.7 L+₹16,904.44 (11.1%) | L3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | K V PRADEESH L2 | SATHEESHAN T L3 | SREEDHARAN T L1 |
|---|---|---|---|---|---|---|
| 1.00Building Maintanance | ||||||
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 314.95 | kg | 159 ₹50,077.05 | 174.58 ₹54,983.97 | 157.12 ₹49,484.94 Lowest |
| 1.00 | 50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 1.76 | cum | 6,381.81 ₹11,231.99 | 7,011.61 ₹12,340.43 | 6,310.45 ₹11,106.39 Lowest |
| 1.00 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 119.7 | kg | 152 ₹18,194.4 | 166.53 ₹19,933.64 | 149.88 ₹17,940.64 Lowest |
| 1.00 | OD218152/2025-2026:Providing and fixing 150mm UPVC square gutter pipes over G I clamp of same profile @ 1 mtr
C/C | 13 | metre | 298 ₹3,874 | 327.02 ₹4,251.26 | 294.04 ₹3,822.52 Lowest |
| 1.00 | OD218153/2025-2026:Providing and fixing Alu Zinc profile sheets (size, shape and pitch of corrugation as approved
by Engineer-in-charge)0.40 mm (+0.05%), thickness . Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size
and shape wherever required. (MOD 12.50 of DSR ) | 119 | sqm | 489.06 ₹58,198.14 | 538.49 ₹64,080.31 | 484.64 ₹57,672.16 Lowest |
| 1.01 | 13.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand). | 26.4 | sqm | 301 ₹7,946.4 | 330.04 ₹8,713.06 | 297.04 ₹7,841.86 Lowest |
| 1.01 | 50.18.7.5.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 6Kgf/cm2 - Internal work - Exposed on wall | 12 | metre | 357.4 ₹4,288.8 | 391.86 ₹4,702.32 | 352.67 ₹4,232.04 Lowest |
Tender Value
Refer Docs
EMD Value
₹4,225
Closing Date
22 Oct 2025, 6:00 pmClosed
ASSISTANT ENGINEER
Office of the Assistant Engineer LID EW Chengalayi Grama Panchayath
Basic Infrastructure development of Chengalayi Krishi Bhavan in Chengalayi GP
2025_LSGD_795555_7
AE/CHLY/02/25-26
Open Tender
Civil Works - Buildings
Item Rate
Chengalayi
Please refer Tender documents.
9 documents required · 9 mandatory
₹555
Yes
₹4,225
Yes
8 Dec 2025
15 Oct 2025
24 Oct 2025
15 Oct 2025
22 Oct 2025
15 Oct 2025
Amount
Building Maintanance
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
OD218152/2025-2026:Providing and fixing 150mm UPVC square gutter pipes over G I clamp of same profile @ 1 mtr C/C
OD218153/2025-2026:Providing and fixing Alu Zinc profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge)0.40 mm (+0.05%), thickness . Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (MOD 12.50 of DSR )
13.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).
50.18.7.5.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 6Kgf/cm2 - Internal work - Exposed on wall
K V PRADEESH (BID ID -2399828)
SATHEESHAN T (BID ID -2403526)
Bidder Name
K V PRADEESH
SATHEESHAN T
SREEDHARAN T
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1352618.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.16 MB
COMBINE.pdf
Tender Documents • 0.05 MB
SBD.pdf
Tender Documents • 1.64 MB
BOQ_1352618.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .